Service selection tab in Service entry sheet

Hi,
When i am trying to create Service Entry Sheet using ML81N, service selection tab is not displayed at the bottom.
So i am not able to adopt the services from PO.
This is working fine in dev and prd, but the problem is with qas.
please let me know what could be the reason.
Thanks.

Guys,
this is the problem raised from client side,
we didnt observe since how long this problem persists only in qas.
Basic things like authorization, entering for correct PO....i have taken care off.
And i checked there is no transaction variant also for this ml81n.
There is no BADI implementation also reg this function/
I am not sure, what else i left,
please if anyone faced similar problem, let me know the solution.
thank u all for ur time.

Similar Messages

  • Service Entry sheet Issue

    Dear all,
    I am facing a problem for long in maintaining Service Entry Sheet.
    After entering my PO number in the transaction ML81N, i have selected "Service Selection" Tab.Then selected adopt full quantity,all the line items appeared in "Select services as reference" screen.Then selected the 1st line item which is having  a quantity of 1 pc, and selected "Services" tab.Immidietly doing this step,system is givinng an error message "Quantity entered 2.00 exceeds quantity 1.00 in Purchase order".I don't understand why system is giving this message even though the quantity in PO is 1 pc.
    Also,while creating Service PO,should i select both GR based as well as Service based IV or only Service based?
    Kindly help me as early as possible.
    Thanks & regards,

    Hi,
    After entering my PO number in the transaction ML81N, i have selected "Service Selection" Tab.Then selected adopt full quantity,all the line items appeared in "Select services as reference" screen.
    Solution:
    Now the system copied all the line item in Service PO along with Qty.
    if again select the line item and then select the Service Icon .. means assume like u are coping the line item again.
    SO, The system issuing the Error message.
    SAM

  • Dump during creation of service entry sheet (ML81N)

    Dump during creation of service entry sheet (ML81N)
    Hi,
    ML81N>Select PO>Enter>goto entry sheet create (empty page)>service entry sheet displayed with internal no. assigned >click tab "service selection">Input PO No.--> enter (here we get Dump ABAP RUNTIME ERROR "TABLE_INVALID_INDEX").
    This is happening only for some POs. What can be the problem?. Is this has something to do with SAP database ???
    - rahul

    Hi,
    it could have the cause that the note 1113220 was missing from your system or that data are inconsistent in your PO.
    If you implemented 1113220 and you still get the dump, please check in transaction ST22 the run time error long text to the dump:
    Parts:
    - How to correct the error?
    - Information on where terminated
    - Source Code Extract -> if you set a breakpoint before the line where the error occured, you could debug the process.
    - Active Calls/Events: if you have an own program displayed here, please check first your program wether it has caused the issue.
    If these do not help to find out the problem cause, please open a SAP ticket and include all of the relevant information regarding the dump.
    Regards,
    Edit

  • Service entry sheet creation for planned services

    Hi,
    I have created a service purchase order with planned services. After this I am trying to create a service entry. During ML81N, I give the P.O number and then click on create service entry.
    However, to adopt the services from the purchases, there is a service selection tab which takes the user to the services tab of the purchase order and then the user must select the relevant service and click on the adopt button to bring the  service into service entry sheet screen.
    However, in my  case, the service selection tab is not appearing on the service entry screen. Hence I am not able to call the services from the purchase order. I am on ECC 6.0 version.
    Am I missing some step in config or in procedure ?
    Kindly advice.
    Regards,
    Rajeev

    Hi,
    This doesn't sound like a config problem.
    If the services are on the PO then you should be able to select the option to choose them from the PO services.
    A remote (very remote) possibility is that you may have an authorisation problem, stopping you from being able to use the PO details? Is this possible? do you have authorisation to change this PO via ME22N etc:?
    Steve B

  • Exit while releaseing Service Entry Sheet ML81N or event

    Hi,
    Any exits/ events while releasing a Service Entry sheet?
    Thanks,
    Krishna.

    hi,
    Check the User Exits for ML81N
    Exit Name           Description
    INTERFAC            Interface for data transfer
    SRVDET              User screen on tab strip of service detail screen
    SRVEDIT             Service list control (maintenance/display)
    SRVENTRY            Unplanned part of entry sheet (obsolete since Rel. 3.1G)
    SRVESI              Data conversion entry sheet interface
    SRVESKN             Set account assignment in service line
    SRVESLL             Service line checks
    SRVESSR             Set entry sheet header data
    SRVEUSCR            User screen on entry sheet tabstrip
    SRVKNTTP            Setting the account assgnmt category when reading in, if "U"
    SRVLIMIT            Limit check
    SRVMAIL1            Processing of mail before generation of sheet
    SRVMSTLV            Conversion of data during importing of standard service cat.
    SRVPOWEB            Purchase order for service entry in Web
    SRVQUOT             Service export/import for inquiry/quotations
    SRVREL              Changes to comm. structure for release of entry sheet
    SRVSEL              Service selection from non-SAP systems
    SRV_FRM             SRV: Formula calculation (obsolete since 4.0A!)

  • Assignment Feild in Service entry sheet - ML81N

    Dear All,
    We need to add assignment Feild (ZUONR) in Service entry sheet (ML81N).
    Can any one suggest the posssible solution.
    Thanks & Regards

    Hi JKTECH TEAM  ,
    As a standard process , system is not going to given Assignment field as input field for ML81N. you can use reference or Document header text.
    If you required you can use reference or Document header text  or you can use user fields.
    If you still required you need to maintain customisation through Exits :
    INTERFAC            Interface for data transfer
    SRVDET              User screen on tab strip of service detail screen
    SRVEDIT             Service list control (maintenance/display)
    SRVENTRY            Unplanned part of entry sheet (obsolete since Rel. 3.1G)
    SRVESI              Data conversion entry sheet interface
    SRVESKN             Set account assignment in service line
    SRVESLL             Service line checks
    SRVESSR             Set entry sheet header data
    SRVEUSCR            User screen on entry sheet tabstrip
    SRVKNTTP            Setting the account assgnmt category when reading in, if "U"
    SRVLIMIT            Limit check
    SRVMAIL1            Processing of mail before generation of sheet
    SRVMSTLV            Conversion of data during importing of standard service cat.
    SRVPOWEB            Purchase order for service entry in Web
    SRVQUOT             Service export/import for inquiry/quotations
    SRVREL              Changes to comm. structure for release of entry sheet
    SRVSEL              Service selection from non-SAP systems
    Please choose your choose.Because Assignment field is given for Sorting purpose of any documents

  • Error message SE508 while create Service Entry Sheet (ML81N)

    Hi,
    In client production system we are facing problem of getting error message SE508: Error in account coding allocation just after we click "adopt services"tab while creating service entry sheet (with respect to PO)Tcode ML81N.Please analyse the problem and give us solution as why it is happening? Please look at error screen shot with steps followed (in attachment) for your reference.
    ML81N>Select PO>Enter>goto entry sheet create (empty page)>service entry sheet displayed with internal no. assigned >click tab "service selection">Input PO No.> click "adopt services"> here we get error message "SE508":ERROR IN ACCOUNT CODING ALLOCATION
    Regards
    Rahul Shukla

    Hi,
    I would suggest you to check the note 1087090 first.                                                                               
    Further I would like to recommend you to deactivate the exit EXIT_SAPLMLSK_001 in case it is active in               
    your system. 
    If the note 1087090 doesn't apply, please check the services data in the tables ESKL and ESLL. If PO services data have been deleted in the corresponding PO item, please check all of the deletion indicators in ESKL and ESLL. There must be an inconsistency. For example: the field 'LOEKZ' has been set in the table ESKL for the PO item, but it does not reflect in the table ESLL.                                                                               
    In table ESLL, there is no logical or physical deletion but the            
    services in the table ESKL has been marked (i.e logically deleted) -> this could be the reason for the error message SE508.  For this case please open a SAP ticket to get help with the correction of the inconsistency.
    Regards,
    Edit

  • User Exit or BADI for ml81n - Service Entry Sheet

    Hi all,
    I would like to find a user exit or BADI or enhancement upon saving.
    The requirement is posting to specific GL A/C from the Service No. given.
    Please don't provide me a list of unnecessary user exit or BADI.
    Urgently need for solution, Thanks.

    Hi,
    Check out the various exits for ml81n
    INTERFAC            Interface for data transfer
    SRVDET              User screen on tab strip of service detail screen
    SRVEDIT             Service list control (maintenance/display)
    SRVENTRY            Unplanned part of entry sheet (obsolete since Rel. 3.1G)
    SRVESI              Data conversion entry sheet interface
    SRVESKN             Set account assignment in service line
    SRVESLL             Service line checks
    SRVESSR             Set entry sheet header data
    SRVEUSCR            User screen on entry sheet tabstrip
    SRVKNTTP            Setting the account assgnmt category when reading in, if
    SRVLIMIT            Limit check
    SRVMAIL1            Processing of mail before generation of sheet
    SRVMSTLV            Conversion of data during importing of standard service c
    SRVPOWEB            Purchase order for service entry in Web
    SRVQUOT             Service export/import for inquiry/quotations
    SRVREL              Changes to comm. structure for release of entry sheet
    SRVSEL              Service selection from non-SAP systems
    SRV_FRM             SRV: Formula calculation (obsolete since 4.0A!)

  • Integrating CATS with MM-SRV, service entry sheet acceptance

    Hi,
    We're importing time sheets from CATS to MM-SRV using transaction CATM. When doing so, a service entry sheet is created. However, the service entry sheet is not accepted per default, which means each service entry sheet needs to be  accepted in an additional step in order for a GR/accpetance document to be posted.
    Do you know of any way to accept the service entry sheet automatically in this flow?
    Thanks in advance,
    Peter

    use the user exit from the list
    SRVDET           User screen on tabstrip of service detail screen 
    SRVEDIT          Control of service list (maintenance/display)    
    SRVESI           Data conversion: Entry sheet/interface           
    SRVESKN          Set account assignment in service line           
    SRVESLL          Service line checks                              
    SRVESSR          Set entry sheet header data                      
    SRVEUSCR     User screen on tabstrip of entry sheet               
    SRVKNTTP     Setting of account ***. cat. during import if "U"    
    SRVLIMIT     Limit check                                          
    SRVMAIL1     Processing of mail before sheet is generated         
    SRVMSTLV     Conv. of data during import of standard specs.       
    SRVPOWEB     Purchase order for service entry on Web              
    SRVQUOT          Service export/import for RFQ/quotations         
    SRVREL           Changes to communication structure for release   
                  of entry sheet                                       
    SRVSEL           Selection of services from other systems

  • Service Entry Sheet Rejection

    Hi
    How can i reject services
    1. After serv entry sheet acceptance
    2. After MIRO doing/payment given
    Vijay

    Hi
    In first case - go to ML81N and enter service entry sheet number - then Edit -> revoke acceptance. Afterwards you can block/ delete the entry sheet depening on the requirment.
    After MIRO/ payment given : First check whether invoice has been cleared for payment - by clicking followon document - then vendor line item - check if there is any clearing document is there.
    If there is no assignment - payment has not been made to vendor.
    If assignment is there then go to FBRA and enter the clearing document number and reset reverse the document
    Now using MR8M reverse the invoice
    come back to ML81N follow the above procedure (revoking acceptance)
    Thanks

  • MSS and Service Selection

    Hi All,
    I am creating a model service specification say for construction of house. There are various outline paths say different floors and services under each path. However some services like RCC work are being used under more than one outline path. While selcting services from MSS completely or partially, is it possible to get the sum of quantities of a service as asingle service line itemin PR or PO?
    Prashant

    There is a subtle but important difference between service selection and playing content from another service. This applies to JMF players in general, and not just MediaSelectControl.
    Playing new content involves the following steps
    1) Read the SI that is needed to decode and play the new content, and start playing it.
    Service selection involves the following steps:
    1) Tune to the TS containing the new service (if necessary).
    2) Read the SI that is needed to decode and play the default streams from the new service, and start playing them.
    3) Begin monitoring the AIT, and kill/start applications as instructed.
    I bolded the last step because that is the important one, and is the one that differentiates playing a new stream from service selection. A service consists of both video/audio and the applications, and so selecting a new service involves changing both of those elements.
    Simply playing a different video stream, no matter what the source, doesn't change the set of apps that will run. Event tuning to a new TS doesn't change this (although it may affect the ability to load them).
    Because of this, MediaSelectControl never causes a service selection operation, and neither does creating a Player for a different service. In both cases, the MHP implementation will still monitor the AIT on the original service. As you've alreadsy noted, mediaSelectControl will not cause the box to tune (neither will creating a new Player), but this is simply to prevent apps inconveniencing other apps unless they explicitly choose to do so.
    To answer your last question, it looks like the JavaTV RI is not MHP compliant.
    Hopefully this will clarify things a little, but if not let me know where is still confusing and I'll try to answer.
    Steve

  • Custom Portal Service not displayed under Service Configuration

    Hi All,
    I am working on EP 7.0 SP8.
    SAP Portal is not displaying any custom built Portal Services under Service Configuration tab.
    I checked with the permission, and I am having the required authorization for my service.
    I am not able to find any document on making the custom service available under Service Configutation to start/stop the service.
    Please let me know any reference docs on this.
    -Thanks,
    Pavan

    Hi Pavan,
    > working on EP 7.0 SP8
    Glad to hear that you are not stuck on EP5   No, really, that is older than old... Anyhow:
    > not displaying any custom built Portal Services under Service Configuration tab
    There services are only listed if they are configurable, i.e. if they have a service profile with at least one property (compare http://help.sap.com/saphelp_nw70ehp2/helpdata/en/df/e6b74253ffda11e10000000a155106/frameset.htm). Otherwise it makes less sense to restart a service (normally this is done after changing a service profile parameter).
    Hope it helps
    Detlev

  • Service entry sheet creation from PO without selecting line item of PO?

    Dear SAPIENTS,
    While creating service entry sheet for one frame work order (PO) i do not want to select line item of PO. I want all the service of PO line item should come automatically in single service entry sheet number.
    At present whenm i enter the PO number its taking line item 10 as default because of this service of that line item is coming and for every line item i have to create different service entry sheet.
    Regards,
    Kaushal Rai

    Hi,
    in ML81N please enter the entry sheet header data, then go to full screen services, push the button for
    "service selection" and after that  a popup appeares for the service selection (SAPLMLSP
    0500). On the bottom of this popup you have the button "complete" = adopt all = F9. If you hit this
    button all of your services within the service specification will be copied into the entry sheet
    at the same time.
    Regards,
    Edit

  • Vendor Evaluation tab not coming in Service Entry sheet.

    Please guide me to get the vendor eval tab in Service entry sheet creation and also provide the what are the transaction code to be used.
    How to run the back ground job.
    In Vendor evaluation each and every vendor need to be maintained the scores?
    Regards,
    Hanuman.

    Hi,
    T.code: ML81N below mentioned tabs are coming.
    1. Basic Data
    2. Accept data
    3. Value
    4. Long txt.
    5. History.
    Vendor Evaluation tab not coming
    Regards,
    Hanuman

  • Vendor evaluation tab in service entry sheet

    Hi All,
    Can any one please help me out to configure the vendor evaluation tab in service entry sheet T code ML81N.  Already done the field setting for service entry sheet and maintained the Purchasing Organization Data in vendor evaluation.
    Regards
    MG

    Hi Guys,
    Thanks for your update. i have refered the above mentioned note, but is it possible to show more than two subcriteria in the vendor evaluation tab in service entry sheet.
    For example i have a criteria like below
    Criteria                               Sub criteria                 Scoring mentod
    Manpower Skill                  Deployment                        C
                                              Competence                       D
                                              Training                              C
    So now my doubt is how can i get all the above three sub criteria in the vendor evalution tab in ML81n. I am getting the first two sub criteria.
    Is there any other way to do it like user exit any enhancement etc.
    A urgent reply shall be highly appriciated.
    Thanks
    MG

Maybe you are looking for