Service sheet cancellation and also transport the additional data tab made
service sheet cancellation and also transport the additional data tab made mandatory in the production server.
HI,
Service Entry sheet cancellation steps as follows.
Step-1 Type ML81N T-code
Step-2 Click 'Other Purchase Order' button and enter your service sheet number.
Step-3 Now, service sheet opened and Click on change button(pencil button) of header level for display mode purpose.
Step-4 Now, Click on Revoke button for acceptance and then SAVE the service sheet.
Step-5 Then, Click on change button(Pencil button).
Step-6 Now, display you deletion flag indicator(dust bin) in header level(same line of change button).
Step-7 Now, Click on deletion flag button(dust bin button) and then SAVE the service sheet.
At present, the particular service entry sheet deleted and also GRN value reversed.
Hope, it is useful for you.
Regards,
K.Rajendran
Similar Messages
-
Grouping field value in the additional data tab is saved with capital lette
Hi,
Whenever I change the value in the 'Grouping field' in the additional data tab, it gets saved with all letter caps.
For e.g, if i enter 'Manager'.. it gets saved as 'MANAGER'.
what could be the reason for this? Is there any configuration for this?
Regards,
SimmiHi Simmi,
For Grouping and Search Field, this seems to be the standard system behaviour in cProjects and as per my knowledge there are no settings for the same.
Probably you can raise an OSS message regarding the same.
Regards,
Vivek Pandey -
To processa huge data with good speed and also paint the same data!
In my project genebrowser in which i am plotting gene, snp, and various other map, I am teking input as a flat file and also page is dynamic like user can change the coordinate view that he wants to see.
1. We have to plot GC percentage after reading the file and this GC % data is of around 10-15 MB size.How to manage this?"
2. due to plotting this huge data the painting of components get very slow.how to manage this?If you use SS2008 and onward take a look at table valued parameter
create table myTable (col1 int, col2 datetime, col3 varchar(max))
go
create type myTableType as table (col1 int, col2 datetime, col3 varchar(max))
go
create procedure up_myTable_insertFromTable
@myTableData myTableType readonly
as
insert into myTable (col1, col2, col3 )
select col1, col2, col3
from @myTableData
go
declare @myTable myTableType
insert into @myTable values(1, getdate(), 'Table Valued Parameters are great')
exec up_myTable_insertFromTable @myTable
The stored procedure parameter has to be READONLY.
This means that you cannot modify it within the stored procedure.
You can only modify it in the scope it was created. i.e.
If you created a table type variable in your procedure you can modify the data in it,
however if you pass that to another procedure that other procedure cannot modify it as it wasn't create
in the scope of that procedure.
Otherwise
1 /*
2 Here is the string that we need to split
3 */
4 DECLARE @str VARCHAR(100)
5 SET @str = '0001,0002,0003,0004,0005'
6
7 /*
8 I am converting the string to an XML structure by
9 inserting XML tags.
10 */
11 DECLARE @x XML
12 SET @x = '<i>' + REPLACE(@str, ',', '</i><i>') + '</i>'
13
14 /*
15 Now we can apply XQuery to return a result set
16 */
17 SELECT x.i.value('.', 'VARCHAR(4)') AS Item
18 FROM @x.nodes('//i') x(i)
19
20 /*
21 Item
22 ----
23 0001
24 0002
25 0003
26 0004
27 0005
28
29 (5 row(s) affected)
30 */
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
send us the process for service sheet cancellation and also transport the additional data tab made mandatory in the production server.
Hi,
Use TCode: ML81N, Click on other purchase order. Enter the Entry sheet/Purchase order number you want to cancel. Then the details will be copied, then click on change and then click on revoke acceptance icon. In this way you will revoke the SES.
If you want to delete the SES, after revoking SES click on Delete icon, so that the SES will get deleted.
For more See the OSS Note: 386156
Regards,
Biju K -
I have used SAP doc mgmt for years. We copied a client and now when I configure a Class to my DMS DIR and go to CV01n Additional Data NONE of the characteristic entry boxes show up. Additional Data is blank.
It appears there must be some high level setting missing in the client. I have checked all authorizations and cannot find a difference between this client and all of the other clients we have. Only this one client does not show the class characteristics in the Additional Data tab.
Any ideas of why this standard function is not working). It does not matter which DIR I config the 017 class to, nothing shows on Additional Data.Hi,
The issue is resolved. We are working in a sandbox with Class configuration on a DMS issue related to standard class 017. There are no standard settings in SPRO - Cross-Application Components | Maintain Object Types and Class Types | for the object type DRAW that will allow "auto-populating" characteristic values as we do with VC class 300.
For whatever reason DRAW and class 017 are not configured by SAP in the same manner as class 300 for example.
We made a config entry for DRAW Class 017 VBAP. Let's just say the system did not like that.
We are exploring other options. -
Add new fields to additional data tab in customs declaration
Hello friends,
My requirement is to add Z fields in the additional data tab in transaction /SAPSLL/CL_CUS_02 of GTS. I would also like to know If its possible to create a new tab all together in /SAPSLL/CL_CUS_02 where in we can add fields from a custom table.
Thanks a lot in advance. Your help will be highly appreciated.
Regards,
KoustubhHi Koustubh,
As Dave pointed out, there is a BadI for extra tab on declaration Item and Header.
There is an example implementation already available in the System. I believe that 1 BadI will no be enough for what you need.
UI enhancement BadI uses standard CUHD and CUIT tables to store the extended data ( via table APPEND ), in order to save content to Z* table you will need a separate BaDI.
Also, If you intend to use this extra data in outbound message / declaration Idoc, extra BadI has to be used and also the basic IDoc type will need to be extended with your Z* segment. Thats probably 2-3 BadIs working in tandem.
Can you tell what is the purpose of the extra data / extra tab ?
Best Regards,
Branislav Petricek -
Screen Exit for adding custom fields in Additional Data tab in ME21N
I need a screen exit or whatever other method for adding custom fields to the additional data tab at header level.
I also need a similar exit for adding a filed at item level.
Thanks in advance
MartinHello,
1st find badi or exit and then create screen ...and assign the screen group and screen no for that implementation....some steps i can give u i did with SPRO tcode....
please check it for VA02
SPRO u2013 SAP Reference IMG --- Logistics General --- Basic partner u2013 customers -- Control u2013 Adaption of customers own masters data element u2013 prepare modification of customer free enhancement of customer master record
1)Screen group description
zs creating badi --- (save)
click on (label tab pages) u2013 new entries
number u2013 10 , function code u2013 zs10 , description u2013 func ---(save) u2013(back)
2)select (FM_CUSTOMER_ADD) u2013 copy
Implementation name u2013 ZAS
(desc u2013 impl for cust) u2013 (save)
interfaceu2014(check_add_on_active) double click on it
3)the above screen appear -- write the code in it u2013 (save) --- (activate) u2013 (back) u2013 (save)
-- (activate) u2013 (back)
Business adds in customer sub screens
4)select (FM_CUSTOMER_ADD) u2013 copy
Implementation name u2013 ZAS1
(description -- cust) u2013 in attribute u2013 (give screen group name)
5)go to interfaces (GET_TAXI_SCREEN) double click on it
(save) --- (activate)
6)(SAVE) --
Goto SE38 -- CREATE PROGRAM WITH NAME (ZQW) type module pool
Goto SE51 -- Prog : ZQW
Screen : 200 (Create)
Goto layout u2013 design the screen
7)save u2013 activate
then goto transaction : va02
For User Exit's
goto to tcode->status->program name->double click on that,
then goto to-> attribute take the package name and
Goto SMOD tcode ->Utilities->give the package name and F8
then a list of exits will display for that tcode as well as that package.
u can check the table MODSAP
u can check the table MODACT
For BADI's,
1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
2)Goto to tcode->status->program name->double click on that program will display's
then press crtl+F then cl_exithandler
Thank u ,
santhosh -
Custom field on Additional Data Tab, VT0*N
Hi Experts,
I would like to know if there is an existing user exit or CMOD or anything that can allow me to add a custom field on the Additional Data tab of transactions VT01N, VT02N and VT03N without using the access key.
I have a requirement that requires me to add a checkbox on the Additional Data tab of the transaction stated above.
I place using access key as a last option on this requirment.
Thanks,Hi Experts,
I would like to know if there is an existing user exit or CMOD or anything that can allow me to add a custom field on the Additional Data tab of transactions VT01N, VT02N and VT03N without using the access key.
I have a requirement that requires me to add a checkbox on the Additional Data tab of the transaction stated above.
I place using access key as a last option on this requirment.
Thanks, -
In MM03, can you configure the display layout of the "document data" tab?
In MM03 on the document data tab, we would like to shorten the length of the "document" column so that the Status field can be viewed on initial screen without scrolling to the right. Is it possible to reconfigure this view?
Hi Heidi,
to change the layout of the linked documents in transaction MM03 please go to the additional data tab and then please use the small configurations button (small table icon on the right side) and follow the below instructions:
1. Configure the table control as you want it.
2. Click the settings button at the top of the table control.
3. Enter a name and chhose "Create".
4. If you want this variant to appear whenever the table control appears, set the "Use as default setting" option.
5. Choose "Copy" to close the dialog box.
If you want to change how existing variants are used, or want to reactivate the basic setting, choose the corresponding settings from the list boxes and choose 'Copy' to close the dialog box.
Best regards,
Christoph
P.S.: Please reward points for useful information. -
Additional Data tab missing from PO items
Hi Experts,
The Additional Data tab for items is missing when I try creating a PO.
I have compared the screen layout, with the system where it is working fine, and found no difference in the configuration.
Please suggest, how can I enable the "Additional Data" tab in PO for items.
With Warm Regards,
SayanHi Preeti/ Dev,
Please refer to the below screen-shot.
Here you will find the Additional Data tab in the Items section.
The Additional Data tab in the header section is appearing fin -
Making a field mandatory in additional data tab in sales area data in XD01/XD02
Hi,
Making fields in additional data tab in sales area data in XD01/XD02 as mandatory is not achievable through configuration. Also, user exit SAPMF02D was not helpful in achieving this. Kindly help me on this.Is this a new field you are creating or an existing field you want to mark as mandatory? My impression from your original post was that it was the second. If so then you don't need to create an implementation of CUSTOMER_ADD_DATA as there must already be one, instead you should be looking for the implementation that manages data for the screen you are interested in. This might be why you don't see your BADI get activated when you go to "area data -> extras -> additional data" as it isn't the right implementation.
If you just want the field to be mandatory when the user goes into the additional data tab I would code this in the screen of the customer exit. If you want this field to be mandatory whether or not they enter other additional data then you should try the method of the badi Nabheet suggested but not in your own implementation. -
Add additional data tab for tcode IW51/IW52/IW53
Hi,
I have to add the additional data tab for tcode IW51/IW52/IW53
I have tried using customer exit QQMA0001. But the tab is not visible.
Please let me know how to add this tab using customer exits.Hi Jogeswara,
Just need a small help.
We are not updating the standard table QMEL.
But we have a customised table for the same.
So when we create a notification number... it goes in the function exit but at that time we do not have the notification number generated.... and we are inserting records in custom table in this exit....
So please guide us how we go ahead about it...
Regards, -
I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
Från: Mylenium
Skickat: den 29 december 2014 16:48
Till: Tony Bohman
Ämne: I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
created by Mylenium <https://forums.adobe.com/people/Mylenium> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595> -
How do I delete a song on my i5s and also in the iCloud
How do I delete a song on my i5s and also in the iCloud?
Delete it on the device.
Music isn't stored at iCloud unless you use the iTunes Match service. -
I can't install ADE on my PC, because as I try to open it a message of error appears to me: The application will be closed. I've already try with different browsers and also with the manual installation, but nothing..
1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install
Maybe you are looking for
-
Sudden increase in import time
<p>On 9/6 I refreshed my database by exporting level 0 information,resetting the database, and importing the data back in. Theimport took 984 seconds. On 9/19, I performed the exact sameprocedure, and the import took 5,838 seconds. While I hadadde
-
ALL third-party applications crash upon save, open, or save as
Okay everyone, this is an odd one. I recently installed photoshop CS6. However, when I try to save my documents in CS6, CS6 freezes, then crashes without an error report. The same thing happens if I try to open or 'save as' a document. However, if
-
imac 10.6.8 won't recognize usb printer but laptop same OS does. Perhaps because i removed lion?? all latest drivers installed tried two different usb cords system profiler doesn't see printer under usb. Can you help?
-
Using Basemaps with MapViewer/WMS
I've set up a basemap which zoom layers a Georaster layer and MasterMap vector layers. This works fine when accessing MapViewer in the normal manner, however, when I access it through WMS I only get the MasterMap data at all zoom levels. e.g. http://
-
I did one spreadsheet and figure out how to start a new one
Start a new spreadsheet on ipad