Service Specific Settings

Hello Experts,
We have deployed ESS but not able to see the Service specific settings under Employee Self Service path. Can anyone please suggest me how can I activate this.
Thanks&Regards
Srinivas

Activate the EA HR switch using sfw5, its mentioned in the notes as well
read help.sap.com

Similar Messages

ESS 7.0 - ESS - Service Specifc Settings

We are in ECC 6.0 and EP 7.0.
Even after switching on the EA-HR Extension Set, we are not able to find Service Specific Settings in the IMG.
Can anyone help where it has been plugged in ECC 6.0 . I am able to find it in ECC 5.0 under Personnel Management in IMG.
tnxs
Ravi

Try enabling EA-FIN along with EA-HR. You should see the Employee Self Service IMG under Personnel Management. Also, double check the EA extensions are active.
Thanks,
-Bharath

Purchase Order - service specification - outline hierarchy

When creating a purchase order for services, I am entering services lines in the SERVICES TAB, I would like to structure the services in the service specification into a hierarchy of outline levels. How I can do this? How can I activate the Service Specification outline ?
Thanks

Hello,
You can use an outline only in t the 'Full Screen: service'. In the Services full screen, you can choose 'Outline On/Off' to show and hide the service overview. You ser the width of the service overview as desired and when entering the transaction, system displays the settings selected before leaving the transaction.
If you select an outline level, the data area of the services displays the relevant service lines. You can choose 'Services' to display at outline level whether service line exist at outline level.
Regards,

Sinchronization between service master & model service specification

Hi,
We are using service master in MM and we are trying to use the model service specifications. However we are read and seen that the model doesn't change according to the service master. I mean if I set deletion flag to a service, the model services where that service is present doesn't change (the same with changes in price and so on).
Does anybody know if there is other funcionality that work of this way? If not, from the ABAP programming point of view, has anybody achieved this sinchronization, how?
Thans in advance
BR

It has to do with your customising. Please test the same with using the standard pricing schema MS0000.
Please kindly refer to the below notes as well to solve your problem:
25357 MM-SRV: Error in the case of service conditions
27024   MM-SRV: Setting up components (services)
584997 Maximum 11 places with prices at services
and check the settings of the condition types in the customizing
in Maintain Conditions for Services according to the notes
456690 / question 1, 25357.
Regards,
Edit

Service-specific error code 997 when starting up Oracle 9i service

Hi,
I have both Oracle 9i and 10g installed in a server. I've added 9i SID in 10g listner.ora. When I try to startup the 9i Oracle service in windows, I get "Windows could not start the 'service name' on Local Computer......If this is a non microsoft service, contact the service vendor, and refer to service-specific error code 997".
Server is Windows 2003 R2 Standard Edition SP1
Does anyone has a solution for this error?
Thanks,
listener.ora in 10g
LISTENER10G =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = sgpdb1)(PORT = 1522))
SID_LIST_LISTENER10G =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = F:\Oracle\Ora10.2.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = RACE)
(ORACLE_HOME = F:\Oracle\Ora10.2.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = IWK1010)
(ORACLE_HOME = F:\Oracle\Ora9201)
(PROGRAM = extproc)
sqlnet.ora in 10g
NAMES.DEFAULT_DOMAIN = world
SQLNET.AUTHENTICATION_SERVICES= NONE
NAMES.DIRECTORY_PATH= (TNSNAMES,EZCONNECT)
tnsnames.ora in 10g
RACE.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(Host = sgpdb1)(Port = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = RACE)
IWK1010.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SGPDB1)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = IWK1010)
)

Here is the resutls. Pls note - startup/exit commands were not executed since did not connenct to sqlplus
C:\Documents and Settings\Administrator>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:03:54
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Log messages written to F:\Oracle\Ora10.2.0\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Start Date 13-APR-2011 12:03:56
Uptime 0 days 0 hr. 0 min. 4 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File F:\Oracle\Ora10.2.0\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Documents and Settings\Administrator>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Apr 13 12:05:16 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
C:\Documents and Settings\Administrator>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:09:59
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Start Date 13-APR-2011 12:03:56
Uptime 0 days 0 hr. 6 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File F:\Oracle\Ora10.2.0\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
Services Summary...
Service "RACE_XPT" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Service "race" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\Documents and Settings\Administrator>lsnrctl service
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:10:08
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "RACE_XPT" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "race" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully

Service specifications screen for service activity becomes grey after PO

Hi All,
I would like your views/comments on the following issue:
I am creating a service activity PS04 , it takes me to the service specification screen,then I am using the single item to create the painting services. The PR is generated for the activity. Till PO is not created for this service activity I am able to add other services as required functionality.
The issue is that once i create the PO for the service activity PR line item, the whole screen of the service specifications becomes grey i.e not editable . can you give me the inputs why that so?
In the ideal scenario & the requirement is that, it should grey out for the service lines of the PR for the lines where PO is created not the whole screen.
please provide the suggestions / solution to this issue.
Thanks in advance
Ramu

Hi
Thanks Virendra for your effort in this replication in IDES. I checked the service activity & its settings which are correct and it is not the issue.
Do you have any idea of the configuration / user exit in case of PO is created it will not allow the change mode of the PR for service activty generated from projects.
Thanks in advance
Regards
Ramu

I-views - Country specific settings

Hi,
We have a requirement of a WD ABAP application for education info in ESS for employee belonging to US, Canada and Trinidad.
I have defined the z-resource, z-service and the country specific settings for same as well as done the active subtype settings in spro.
For settings at the portal end, i want to know whether i will have to create an i-view for education data under the 'personal information' for each country?i.e. one education i-view for US, one for canada and one for trinidad. If yes, can all the three i-views call the same WD ABAP application?
If the above is done, then 3 pages will have to be created for the 3 i-views.
Kindly confirm my understanding.
TIA.

Hi,
You can just have one WDA and maintain OTR for the texts which are displayed on the view.
Using the FM SOTR_API_WB_TRANSLATE you can maintain translations in your required language.
Thanks,
Deepthi

Text message service center settings?

Hi, I have a Samsung Galaxy S4. I am currently in the UK and inserted a pay-as-you-go SIM card from O2. After modifying the APN settings, I have been able to start using the phone and the internet - but unfortunately, my text messaging is not working. After spending an hour with O2 customer service, they insisted that I need to modify my "text message service center" settings. They said this should be one of the options on my SMS settings -- but I only have two options on that page: delivery reports and manage SIM card messages (when I click on this one, it just takes me to a screen that says "no messages" and has no other options). So I am supposed to enter the following number in text message service center settings, but I do not have that option on my phone:
(Removed)
Any suggestions?
Private info removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

Hi SA81,
The UK sounds awesome! I know important text messages can be while traveling. We do not support other carriers sim cards or settings. You would need to reinsert your Verizon Wireless sim card to ensure proper use of all the features on the device.
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

How To Configure TREX Name Server&Port for UDDI Service Registry Settings

Hello Experts,
we are using CE 7.1 SP 4 and I would like to use the trex service in the Service Registry.
I use \NWA\Service Registry Configuration\Service Registry Settings\Keyword Search and want to test the TREX Communication using the Test Connection Button.
If I do so, I receive "Connection to TREX not successful".
When I press the Update TREX button I receive this exception:
com.sapportals.trex.TrexException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
I tried to configure the trex.service with the two parameters: nameserver.address and nameserver.backupserverlist -> tcpip://myhostname.mydomain:30001 (Instance 00).
I am not sure if the port number is correct -> is there a way to lookup the correct port number?
Is there something else I should configure?
Thanks for help, best regards
Thomas

Hi Ganesh,
In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
Thanks,
Sri
P.S Please rewards points if you find this helpful. Thanks.

Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

Hi Forum members,
We have a client that has intermittent issues with RDS on a 2012 R2 server.
As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
DNS roles amongst others.
The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
Log Name:      System
Source:        Service Control Manager
Date:          21/01/2015 4:50:32 PM
Event ID:      7024
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      intentionally removed.local
Description:
The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
Event Xml:
<Event xmlns="
<System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7024</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
    <EventRecordID>53721</EventRecordID>
    <Correlation />
    <Execution ProcessID="568" ThreadID="12436" />
    <Channel>System</Channel>
    <Computer> intentionally removed.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">Remote Desktop Management</Data>
    <Data Name="param2">%%2284126209</Data>
    <Binary>520044004D0053000000</Binary>
</EventData>
</Event>
In addition in the "Application" event log, the following error is logged:
Log Name:      Application
Source:        MSSQL$MICROSOFT##WID
Date:          21/01/2015 5:24:47 PM
Event ID:      18456
Task Category: Logon
Level:         Information
Keywords:      Classic,Audit Failure
User:          NETWORK SERVICE
Computer:      intentionally removed.local
Description:
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
Event Xml:
<Event xmlns="
<System>
    <Provider Name="MSSQL$MICROSOFT##WID" />
    <EventID Qualifiers="49152">18456</EventID>
    <Level>0</Level>
    <Task>4</Task>
    <Keywords>0x90000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
    <EventRecordID>4228336</EventRecordID>
    <Channel>Application</Channel>
    <Computer>intentionally removed.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<EventData>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data> Reason: Could not find a login matching the name provided.</Data>
    <Data> [CLIENT: <named pipe>]</Data>
    <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
Regards,
David West.

Hi David,
If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
More information for you:
Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
http://support.microsoft.com/kb/2799605/de
Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
http://support.microsoft.com/kb/2833839
If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

The Lync Server Front-End service terminated with service-specific error %%-1008124893.

Hello, everyone
I've installed Lync Server 2010. There was no error during installation. But when i start Lync Server Front End Server, i'm getting following error:
The Lync Server Front-End service terminated with service-specific error %%-1008124893.
In event viewer:
The evaluation period for Microsoft Lync Server 2010 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2010 has expired.
I've upgraded Lync Server according to http://technet.microsoft.com/en-us/library/gg521005.aspx?ppud=4
Also I've installed all Lync Server updates.
But I still could not start Lync Front End Sever. How can I solve this problem?
Thanks

Hi,
Can you try to run
start-cswindowsservice -report c:\report.html
and post the report so we can have more information about your problem ?
Regards,
Adrian TUPPER - ABC Systemes - http://thelyncexperience.blog.com/ If answer is helpful, please hit the green arrow on the left, or mark as answer Thank you

Service Specification in sales order

Hi,
Can any letme know what are the tables or functional modules which can be used to get done a ABAP report to get display the plan value of service specification of a sales order evel .
In brief i need to develop a ABAP report considering the figures appearing under Service Specification together with more break up to the plan value,Currently plan value is a single figure which shows Current Figure and i need to further break up the same by Previous/ Current /cumulative .

hi Lokesh,
Welcome to SDN, check this BAPI
'BAPI_SALESORDER_CREATEFROMDAT2'
Sachin

How to change the short text in a model service specification??

Hi,
I've tried changing a model service specification using the transaction code ML11 but couldnt change the short text language from German to English.

Hi
One possibility is to Maintain the languages in the Additional data tab under description in the material master record for your Services . Please check wether both the languages are maintained or not . Please correct me if i am wrong .
regards
kp

How to change data in service specifications of a contract?

Hi guys,
my task is to change some data (ex. price, Material Group) in service specifications of given contract.
I read this data from an excel file and have to do this 'update'. I wanted to use bapi_contract_change but this FM is not suitable for my task.
Anyone could help? Which way to go? Thanks a lot.

No ideas instead of creating BI map?

Transaction SE16: Field selection (User-Specific Settings) is NOT working for ALL tables

Hi Guru’s,
I have an issue in Transaction SE16, Field selection (User-Specific Settings) is NOT working in Tables (ALL tables).
Following is the screenshot attached for your kind reference,
That is in the initial screen of transaction SE16 if I choose Filed Name or Filed Label only the technical details (Field Names) are appearing and not the descriptions like Client, Purchasing Doc, and Company Code Doc. Category Document Type etc…
Right now I am using ECC6 and EHP7 SAP system.
Please help me to resolve this issue by implementing any OSS note or User Role creations or any technical changes required in system.
Hope the requirement is clear and in case need any clarification please revert back.
NOTE: Right now in Development System we don’t have any successful user to compare the settings.
Regards,
Kumar.S

Thanks Patra.
Even I searched in SAP portal and couldn't able to find the relevant OSS note.
Following is my BASIS team response,
"Only you can view Table Field values from higher release"
Can you suggest / guide on this comment as well.
Looking forward to your speedy response.
Regards,
Kumar.S

Service Specific Settings

Similar Messages

Maybe you are looking for