Service Station closes after starting after install of 3 Toshiba patches

Hello there,
there was recently a "patch day" in Toshiba Service station. I believe from my memory the patches came out earlier but I installed them on 23 april 2010. There were three patches and as far as I can reconstruct from the system recovery it were:
- BIOS flashing
- HDD/SSD Alert patch
- HDD Recovery patch.
So, besides that I had problems getting the BIOS flashing patch to run, eventually succeeded by extracting the installation files to a different location and run it with administrator rights.
My problem is, that after this patch session, my Toshiba Service Station does not start up any longer. When I start my system, after logging on it seems to start up but then always closes again with the windows error report saying "stopped working" and that's it. I am not sure of which patch this could be. Also I believe that one of these patches said in the description that it will update Service Station itself?! I downloaded Service Station from the Toshiba Website but it will not turn out to the better, doesn't matter if I uninstall it before, start the installation with administrator rights or not.
My system is Satellite A500, Windows 7 64bit.
I hope you can help. Unless I cannot access updates any longer!
Note: Some days before I installed a graphic's driver for my Nvidia GT 230m FROM THE NVIDIA WEB SITE. Why did I do so? I experienced literally HOURLY an unwanted system restart and as I can see from the problem report it was always due to the graphic's driver. In the following I installed the two patches from the Toshiba Website, the older and the newer but the problem persisted. Luckily at some day I recheched the Nvidia website and there was a new driver.
Although it said BEFORE (not now any longer) that this graphic card should rely on a manufacturer driver, I nevertheless installed it because it coulnd't become worse. The positive thing is, that I had not a single system crash until now even if I leave the laptop switched on for hours.
I am not quite sure if the problem with Service Station started right after this graphic driver installation, but it can't be because I installed the three patches mentioned above THROUGH Service station some days later.
But it might have affected the software after these patches? I am not sure.

Hi
Simply said; Toshiba Service Station crashes and new installation of this tool didnt help.
Right?
Well, because you are not sure whats wrong and according to the posting, you have got some other problems related to the software, I recommend to recover the notebook using the HDD recovery option!
This will set the notebook to factory settings.
Of course you should backup the data if you have important files.
Run HDD recover and after that check how the notebook would functions!

Similar Messages

IPod service manager will not start after installing iTunes 10

iPod service manger will not start after loading iTunes 10. iPhone will not connect. I've removed reinstalled, wiped the registry reinstalled and deauthorized, removed and reinstalled from several different downloads. I have full permissions fo rservices and am administrator.. We now have three other units in teh office with the same issue.
now what do I do?

Don't know about fixing PitStop. However, have you tried a simple repair on Acrobat. If Acrobat won't open you can do that from the Programs and Features menu (Add/Remove Programs in OS prior to Win7).

Google Play closes on start after ICS upgrade on Arc S, accounts and sync empty, setup guide problem

I upgraded my arc s to ics 4 days ago, i used google play for the first time after upgrade today. It closes on start. I checked Accounts and Sync, my google account is not there, the whole list is just... empty. I tried the setup guide, at the step they ask to connect to services and sync, i clicked the google button, click and click and click, nothing, all the other icons work (like facebook), i searched for gmail app, non existent....... Seems too late to ask for help but im repairing my phone using pc companion now, hope everything works again.... just powered on my phone, i have a feeling nothing will be changed... really sad that Sony didnt realise this.... i cant access google services at all....plain weird
Solved!
Go to Solution.

if I were you I would repair the phone with SUS and see if that solve the issue
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe

Service for listener can start after change ip of machine

Hi,
I have installed Oracle 10g, which installation was done from the other person which is not part of the team, my experience with Oracle is little.
We executing our automation tests on Vshere machine and our sysadmin had to change to a new hardware and after this move to change IP of the machine.
On a machine it has installed microsoft loopback adaptor, also in host files are added iP 10.10.10.10 host of the machine with domain and only host name.
in tnsnames.ora are used host names no IP addresses. After change of IP i loads first page and when i have tried to login in Enterprize manager can't open next page.
I checked windows services and i found that oracle listener was stopped when i have tried to started it shows this error: "The nameof listner service on Local computer started and stopped. Some services stop automaticly if they are not use by other services or programs", Oracle Fulfillment Server failed with the same error when i have tried to start this service. Also OracleConcMgr raise error whrn i have tried to run service with this error 1067: The process terminated unexpetedly
I ewxecuted command lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.1.0.5.0 - Production on 25-JUN-2012 14:53
:45
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.1.0.5.0 - Produ
ction
Start Date 25-JUN-2012 14:01:09
Uptime 0 days 0 hr. 52 min. 38 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\PROD\inst\apps\PROD_\ora\10.1.
2\network\admin\listener.ora
Listener Log File C:\oracle\PROD\apps\tech_st\10.1.2\network\log\listene
r.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hostname)(PORT=
1521)))
The listener supports no services
The command completed successfully
Thanks in advance if you can help me. if you need more info write me

Solution:
I secured Enterprise Mangager (HTTPS, emctl secure...).
First, I must unsecure EM-Console, run "chgiphost.sh -mid" and then re-secure EM-Console.
Look at: Metalink - Note 280034.1 How to Secure and Unsecure the AS Control 10g Console
regards
Harald.

ADFS 2.0 service does not automatically start after reboot

Hello,
We have two ADFS 2.0 servers in a farm. Any time these servers reboot, the ADFS service does not automatically start, even though the service is set to auto start. If I manually start the service it starts within 10 seconds.
The error in the logs show:
A timeout was reached (30000 milliseconds) while waiting for the AD FS 2.0 Windows Service service to connect.
The AD FS 2.0 Windows Service service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
But after the reboot is completed, I can manually start the service with no problems. Again, this ONLY happens on restart. I've searched the forums and found potential solutions for people who have consistent issues with starting ADFS every time.
Any ideas?

UPDATE - I built a 3rd ADFS server and was unable to reproduce the problem, until...
I went in to the service properties of ADFS and saw that even though I specified a Log On As account during the ADFS wizard, it changed itself back to "Network Service". I re-entered our ADFS service account username and password, it was
accepted, and I rebooted. On the next reboot, the service did not start automatically (with the same errors as the other ADFS servers), but I was able to manually start it.
I then went to the original ADFS server having the problem, switched it to use "Network Service", rebooted, and the service started up properly on reboot. I then changed it back to the named domain service account, and the issue came right
back. There are no other errors in the System Log indicating a problem with anything else.
So my guess is that something is happening to prevent the service from starting with the named Domain account on server reboot. But what?

Report service doesn't to start after developer6i patching on windows OS

Hi hsawwan ,
I am unable to start report and apps listener service after developer 6i patching on windows platform.
m getting below error while starting report service.
Setting service OracleReportServer-Rep60_UAT to mode 2
Executing service control script:
d:\APPSORA\uatcomn\admin\scripts\UAT_diw-erpweb-01\adrepctl.cmd start
Timeout specified in context file: 100 second(s)
script returned:
ECHO is off.
ECHO is off.
Wed 02/11/2009 08:57 AM
Starting reports server for UAT ...
The Oracle Reports Server [Rep60_UAT] service is starting.
adrepctl.cmd exiting with status 2
.end std out.
The Oracle Reports Server [Rep60_UAT] service could not be started.
A service specific error occurred: 186.
More help is available by typing NET HELPMSG 3547.
.end err out.
Hi guys, anyone who has face this issue before please help me to get it resolved .
Regards
Nitin

no sir,
See the below text from autoconfig log .
Starting AutoConfig at Wed Feb 11 09:04:01 2009
Using adconfig.pl version 115.81
Classpath : d:\APPSORA\uatcomn\util\java\1.4\j2sdk1.4.2_04\jre\lib\rt.jar;d:\APPSORA\uatcomn\util\java\1.4\j2sdk1.4.2_04\lib\dt.jar;d:\APPSORA\uatcomn\util\java\1.4\j2sdk1.4.2_04\lib\tools.jar;d:\APPSORA\uatcomn\java\appsborg2.zip;d:\APPSORA\uatcomn\java
===========================================================================
Starting Utility to Report Version Conflicts at Wed Feb 11 09:04:02 AST 2009
Using VersionConflictListGenerator.java version 115.2
All driver files processed.
No version conflict encountered.
===========================================================================
ERROR: Context Value Management Failed.
Terminate.
The logfile for this session is located at:
d:\APPSORA\uatappl\admin\UAT_diw-erpweb-01\log\02110904\adconfig.log

Circle with line after starting Mavericks install

Hi everyone,
I downloaded Mavericks and started the install. My Mac restarted, and the grey Apple logo turned into a circle with a line through it. It's been like this for around two hours now. There's the spinning "wait" circle below that. Has something gone wrong? I have a MacBook Pro, non-retina, mid-2012. I had OS X Mountain Lion 10.8.5 before starting the upgrade. Thanks!

Hey everyone,
Apologies for my impatience
I found that I could get back to ML by going into recovery mode and repairing permissions. I ran Apple Hardware Test and got no errors, so the hardware was okay. I contacted Apple Support via chat and resetting the SMC was suggested. I did that but it didn't work. So, I decided the best thing to do was to take my MacBook to the Genius Bar at the local Apple Store.
When the technician tried to install their copy of Mavericks, the installer froze up, so he force-quit it and rebooted in "select startup disk" mode (not sure that's the right term). He selected his 10.9 install disk and when it booted up, it looked like recovery mode. He used his Disk Utility to see if there was a problem with my hard disk. We had run my Mac's DU with no problem, but when he used theirs, we noticed that the volume wasn't mounted (greyed out). The main disk was there, but the volume beneath it was greyed out, and when he clicked the Mount button, it didn't. Disk Utility reported it as locked (not sure that means anything), but he simply couldn't mount the drive. He thought perhaps there was a FileVault issue. When I first got my Mac, I used FileVault to encrypt the hard disk. When I kept getting prompted for passwords too much, I decrypted it.
I made a Time Machine backup two days ago, after I got back into ML. The tech asked me if I was comfortable if we erased the disk, install Mavericks fresh, then I'd do a Migration Assistant to get my apps and files back. That's what we did. It took from 30 - 40 minutes to complete. After doing a fresh install of Mavericks, I migrated my data back - now I'm running Mavericks. I honestly don't know if this issue was really caused by my encrypting and decrypting my hard disk, if it was just a bad download of the Mavericks installer, or I had some sort of data corruption that prevented the installer from being able to access my hard disk.
I've read that it's best to install over ML, but in my case, it worked out better to erase the drive and install fresh, then use Migration Assistant and Time Machine to get my user account, apps, and files back. I'll hesitate using FileVault now, though.
I don't know if this information will help anyone, but this is what worked to get me up and running.

Service Station does not start automatically

Good morning,
recently the Toshiba Service Station application does not start when Windows (8.1) starts. If I launch the application manually, it runs normally.
I would like to restore the automatic start of that application. What can I do?

Hi
You can add the application (service station) to the Win 8.1 startup.
Go to the Start screen
Click on the down arrow to show all your applications
Right click on the application you would like to have start automatically.
Select Open file location
This will bring up the location (url) where the program is started
Right click and select Copy
On your computer, from the same Explorer window, go to:
C:\Users\USERNAME\AppData\Roaming\Microsoft\Window s\Start Menu\Programs\Startup
Note: USERNAME must be replaced by the name of the user that is logging in.
Then select Paste Shortcut
After that, the next time you log on, that program will start automatically.

SCVMM Service (2012) does not start after reboot VMM-Server

VMM-Server: WIN 2008 R2 Standard x64
SQL-Server: 2008 R2 x64
Hi,
after reboot VMM-Server we get the following error messages from the EventViewer when starting the VMM-service:
Event ID: 19999
Virtual Machine Manager (vmmservice:130936) has encountered an error and needed to exit the process. Windows generated an error report with the following parameters:
Event:VMM20
P1(appName):vmmservice
P2(appVersion):3.0.6005.0
P3(assemblyName):Remoting
P4(assemblyVer):3.0.6019.0
P5(methodName):M.V.R.IndigoSerializableObject.BuildKnownAssemblyTypes
P6(exceptionType):S.Reflection.ReflectionTypeLoadException
P7(callstackHash):17ca
and
Event ID: 1
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
at System.Reflection.Module._GetTypesInternal(StackCrawlMark& stackMark)
at System.Reflection.Assembly.GetTypes()
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)-2146232830
Thanks in advance!

You would have to post the same in the XI forums for more relevant answers.
Please close this thread and open a new on in the XI forums or send a mail to
[email protected]
tp have it moved.

Service Registry error while starting after configuring with DB2 database

Hi
I installed WLS 9.1 / ALSR 2.1 on RedHat Linux 4 EL.And DB2 8.2 FP12
It was started fine with the default HSQL database, after changing the database to DB2 and restarted the server, I am getting the following errors
Any one know about this ..please help me. Seems it was alredy posted on forums.bea.com but those threads are not accessioble now.Appriciate any quick response
error log - I also checked the account_list.xml file it looks fine.
JAVA Memory arguments: -Xms2048m -Xmx2048m -XX:MaxPermSize=128m
WLS Start Mode=Production
CLASSPATH=:/opt/bea/bea91/patch_weblogic910/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/bea/Java5/jdk1.5.0_17/lib/tools.jar:/opt/bea/bea91/weblogic91/server/lib/weblogic_sp.jar:/opt/bea/bea91/weblogic91/server/lib/weblogic.jar:/opt/bea/bea91/weblogic91/server/lib/webservices.jar::/opt/bea/bea91/weblogic91/common/eval/pointbase/lib/pbclient51.jar:/opt/bea/bea91/weblogic91/server/lib/xqrl.jar::/opt/bea/bea91/weblogic91/integration/lib/util.jar:
PATH=/opt/bea/bea91/weblogic91/server/bin:/opt/bea/Java5/jdk1.5.0_17/jre/bin:/opt/bea/Java5/jdk1.5.0_17/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/weblogic/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.5.0_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_17-b04)
Java HotSpot(TM) Server VM (build 1.5.0_17-b04, mixed mode)
Starting WLS with line:
/opt/bea/Java5/jdk1.5.0_17/bin/java -server -Xms2048m -Xmx2048m -XX:MaxPermSize=128m -da -Dplatform.home=/opt/bea/bea91/weblogic91 -Dwls.home=/opt/bea/bea91/weblogic91/server -Dwli.home=/opt/bea/bea91/weblogic91/integration -Dweblogic.management.discover=true -Dweblogic.ProductionModeEnabled=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole= -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -Djava.security.auth.login.config=/opt/bea/bea91/alsr21/conf/jaas.config -Dweblogic.ext.dirs=/opt/bea/bea91/patch_weblogic910/profiles/default/sysext_manifest_classpath -Dweblogic.Name=zsoaLAALSRAdminServer -Djava.security.policy=/opt/bea/bea91/weblogic91/server/lib/weblogic.policy weblogic.Server
<Dec 23, 2008 11:02:49 AM PST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
/opt/bea/bea91/user_projects/domains/zsoaLALASRDomain/lib/db2jcc2.jar:/opt/bea/bea91/user_projects/domains/zsoaLALASRDomain/lib/db2jcc_license_cu2.jar>
<Dec 23, 2008 11:02:49 AM PST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 1.5.0_17-b04 from Sun Microsystems Inc.>
<Dec 23, 2008 11:02:50 AM PST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.1 Mon Dec 12 19:26:33 EST 2005 689178 >
<Dec 23, 2008 11:02:53 AM PST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /opt/bea/bea91/license.bea>
<Dec 23, 2008 11:02:53 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 23, 2008 11:02:53 AM PST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Dec 23, 2008 11:02:53 AM PST> <Notice> <Log Management> <BEA-170019> <The server log file /opt/bea/bea91/user_projects/domains/zsoaLALASRDomain/servers/zsoaLAALSRAdminServer/logs/zsoaLAALSRAdminServer.log is opened. All server side log events will be written to this file.>
<Dec 23, 2008 11:02:53 AM PST> <Error> <Socket> <BEA-000438> <Unable to load performance pack. Using Java I/O instead. Please ensure that libmuxer library is in :'/opt/bea/Java5/jdk1.5.0_17/jre/lib/i386/server:/opt/bea/Java5/jdk1.5.0_17/jre/lib/i386:/opt/bea/Java5/jdk1.5.0_17/jre/../lib/i386:/opt/bea/bea91/patch_weblogic910/profiles/default/native:/opt/bea/bea91/weblogic91/server/native/linux/x86_64:/opt/bea/bea91/weblogic91/server/native/linux/x86_64/oci920_8'
>
<Dec 23, 2008 11:02:54 AM PST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Dec 23, 2008 11:02:56 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Dec 23, 2008 11:02:56 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
INFO: com.systinet.wasp.WaspImpl - Starting Systinet Server for Java/6.0 (Java/1.5.0_17; Linux/2.6.9-78.0.1.ELsmp; build SSJ-6.0-20060622-1136)
INFO: com.systinet.wasp.monitoring.LogEventModule - Starting event management
INFO: log4j.Log4JAdapter - Events Log File: /opt/bea/bea91/user_projects/domains/zsoaLALASRDomain/servers/zsoaLAALSRAdminServer/tmp/_WL_user/registry/4rin9e/public/systinetRegistry_logEvents.log
INFO: log4j.Log4JAdapter - Error Events Log File: /opt/bea/bea91/user_projects/domains/zsoaLALASRDomain/servers/zsoaLAALSRAdminServer/tmp/_WL_user/registry/4rin9e/public/systinetRegistry_errorEvents.log
INFO: com.idoox.config.xml.ConfigStore - Starting configStore with savingPeriod 2000
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [system][http://systinet.com/wasp/app/core_services_client][core_services_client][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [system][http://systinet.com/wasp/app/builtin_serialization][builtin_serialization][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [system][http://systinet.com/wasp/app/security_providers][security_providers][1.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [system][http://systinet.com/wasp/app/uddi/redirect/5.0][uddi-redirect][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/wasp/app/uddi/6.0][UDDI-services][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/statistics/5.0][Statistics-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/xslt2uddi/v3/5.5][UDDIClient-xslt2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/api/ext/5.0][UDDIClient-ext][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/approval_production/5.0][Approval-production-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/wsdl2uddi/v3/5.5][UDDIClient-wsdl2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/approval_management/5.0][Approval-management-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/configuratorCluster/5.0][Configurator-cluster-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/replication/v3/5.0][Replication-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/subscription/listener/v3/5.0][UDDIClient-subscription-listener-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/approval/5.0][Approval-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/taxonomy/v3/5.5][Taxonomy-client-v31][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/inquiryUI/6.0][UDDIClient-v3-ui][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/validate-values/v1/5.0][UDDIClient-validate-values-v1][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/custody/v3/5.0][UDDIClient-custody-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/subscription/v3/ext/6.0][UDDIClient-subscription-v3-ext][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/administrationUtils/5.5][AdministrationUtils-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/wasp/app/bsc/web/6.0][bsc][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/transformer_kr/5.5][Transformer-kr-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/v3/5.0][UDDIClient-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/wsdl2uddi/v2/5.0][UDDIClient-wsdl2uddi-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/validate-values/v2/5.0][UDDIClient-validate-values-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/v3_ext/5.0][UDDIClient-v3_ext][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/xml2uddi/v3/5.5][UDDIClient-xml2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/value-set-caching/v3/5.0][UDDIClient-value-set-caching-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/xsd2uddi/v3/5.5][UDDIClient-xsd2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/wasp/app/uddi/web/6.0][UDDI-web][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/approval_checker/5.0][Approval-checker-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/category/v3/5.5][Category-client-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/group/5.5][Group-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/subscription/v3/5.0][UDDIClient-subscription-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/v2/5.0][UDDIClient-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/configurator/5.0][Configurator-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/permission/5.5][Permission-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/taxonomy/v3/5.0][Taxonomy-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/v1/5.0][UDDIClient-v1][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/account/5.5][Account-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client/value-set-validation/v3/5.0][UDDIClient-value-set-validation-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Registering package [uddi][http://systinet.com/uddi/client-core/5.0][Client-core][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [system][http://systinet.com/wasp/app/core_services_client][core_services_client][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [system][http://systinet.com/wasp/app/builtin_serialization][builtin_serialization][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [system][http://systinet.com/wasp/app/uddi/redirect/5.0][uddi-redirect][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [system][http://systinet.com/wasp/app/security_providers][security_providers][1.0]
INFO: com.idoox.wasp.security.server.SecurityModule - SecurityModule starts.
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client-core/5.0][Client-core][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/statistics/5.0][Statistics-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/approval_management/5.0][Approval-management-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/replication/v3/5.0][Replication-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/transformer_kr/5.5][Transformer-kr-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/v3/5.0][UDDIClient-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/v2/5.0][UDDIClient-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/configurator/5.0][Configurator-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/v1/5.0][UDDIClient-v1][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/account/5.5][Account-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/xslt2uddi/v3/5.5][UDDIClient-xslt2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/api/ext/5.0][UDDIClient-ext][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/wsdl2uddi/v3/5.5][UDDIClient-wsdl2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/inquiryUI/6.0][UDDIClient-v3-ui][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/custody/v3/5.0][UDDIClient-custody-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/administrationUtils/5.5][AdministrationUtils-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/v3_ext/5.0][UDDIClient-v3_ext][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/xml2uddi/v3/5.5][UDDIClient-xml2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/value-set-caching/v3/5.0][UDDIClient-value-set-caching-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/xsd2uddi/v3/5.5][UDDIClient-xsd2uddi-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/category/v3/5.5][Category-client-v3][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/subscription/v3/5.0][UDDIClient-subscription-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/taxonomy/v3/5.0][Taxonomy-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/value-set-validation/v3/5.0][UDDIClient-value-set-validation-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/approval/5.0][Approval-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/wsdl2uddi/v2/5.0][UDDIClient-wsdl2uddi-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/validate-values/v2/5.0][UDDIClient-validate-values-v2][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/configuratorCluster/5.0][Configurator-cluster-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/validate-values/v1/5.0][UDDIClient-validate-values-v1][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/group/5.5][Group-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/permission/5.5][Permission-client][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/subscription/listener/v3/5.0][UDDIClient-subscription-listener-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/subscription/v3/ext/6.0][UDDIClient-subscription-v3-ext][6.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/taxonomy/v3/5.5][Taxonomy-client-v31][5.5]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/approval_checker/5.0][Approval-checker-client-v3][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/uddi/client/approval_production/5.0][Approval-production-client][5.0]
INFO: com.systinet.wasp.admin.PackageRepositoryImpl - Loading package [uddi][http://systinet.com/wasp/app/uddi/6.0][UDDI-services][6.0]
[Fatal Error] account_list.xml:1:1: Premature end of file.
<Dec 23, 2008 11:03:04 AM PST> <Error> <HTTP> <BEA-101216> <Servlet: "Registry Servlet" failed to preload on startup in Web application: "registry.war".
java.lang.ExceptionInInitializerError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at com.systinet.uddi.security.destination.DestinationSecurityModule.load(DestinationSecurityModule.java:25)
at com.idoox.wasp.ModuleRepository.loadModule(ModuleRepository.java:120)
org.xml.sax.SAXParseException: Premature end of file.
at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at com.idoox.config.xml.XMLConfigurator.prepareConfigFile(XMLConfigurator.java:575)
at com.idoox.config.xml.XMLConfigurator.init(XMLConfigurator.java:420)
at com.idoox.config.xml.XMLConfigurator.init(XMLConfigurator.java:333)
Truncated. see log file for complete stacktrace
>
<Dec 23, 2008 11:03:04 AM PST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'registry'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "Registry Servlet" failed to preload on startup in Web application: "registry.war".
<Dec 23, 2008 11:03:04 AM PST> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "zsoaLAALSRAdminServer" for domain "zsoaLALASRDomain" running in Production Mode>
<Dec 23, 2008 11:03:04 AM PST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Dec 23, 2008 11:03:04 AM PST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Exception in thread "Timer-3" java.lang.NoClassDefFoundError: com/systinet/wasp/webservice/FinalizationSupport
at com.systinet.wasp.ServiceManagerImpl$ReferenceQueueCleaner.run(ServiceManagerImpl.java:2617)
at java.util.TimerThread.mainLoop(Timer.java:512)
at java.util.TimerThread.run(Timer.java:462)

I discovered, that the problem is probably caused by a collection, which is returned by a findBy method.
see detail of exception:
Caused by: javax.xml.bind.JAXBException: com.sun.xml.bind.v2.runtime.IllegalAnnotationsException: 1 counts of IllegalAnnotationExceptions
java.util.Collection is an interface, and JAXB can't handle interfaces.
this problem is related to the following location:
at java.util.Collection
When I deploy an simple WS (summerizing 2 numbers) it is deployed fine and the WS is up and running.
Does anyone has experienced a similar problem? I want to expose the functionality of my BO methods in order to set up a small POC.
Can anyone please help?
Thanks & Regards,
Michael
null

Macbook Pro Won't Boot After Starting Lion Install

2008 Macbook Pro 17" with Core 2 Dou processor.
Internal Disk has two Partitions
Downloaded Lion from App store and ran installer. Selected 2nd partition which is Mac OS Extended Journaled. (I was intending to do a clean install on this empty partition.)
Installs appears normal, goes to boot and hangs at the gray screen after the chime.
Verbose logging does not show anything obvious, no more info after identifying the network adaptors.
Booting with option key does not give option to boot to Snow Leopard partition.
I

Welcome to Apple Support Communities
Press Command and R keys when your Mac starts and reinstall OS X. Mountain Lion is damaged in the computer

Adobe CC crashed after start (after upgrade to Windows 8.1)

Hi there,
yesterday i uprgraded windows from 8.0 to 8.1 and now my Adobe creative cloud wont to start.
I tried to reinstall, delete registry, adobe cc cleaner and nothing works.
Thanks for suggestions

Nobody?
Here is maybe one more usefeul information to fix this issue...
After i lunch Adobe CC and error comes it is still in task manager.
Please I need to fix this problem asap because i have lot of work to do.

Service keyagent failed to start when installing mac drivers on windows

I have installed windows vista 64-bit with no problems on my imac, tried to install the drivers of the mac disk but when it comes to start the keyagent it says i don't have sufficient privileges to start the system services and the same for starting the MacHalDriver, i have full admin rights under vista. Then i cant start bootcamp from vista the exe file does not work. All the other drivers have installed and worked correctly. Any help for this???

The solution outlined here:
http://discussions.apple.com/thread.jspa?messageID=7105319
using the torrent download fixes the problem.

NI Update Service 2.1.0.103 recommends installing LV 2012 f1 patch over later version

Reporting this to NI support people as a possible bug: NI Update Service 2.1.0.103 (which came on the Aug'12 Dev Suite discs) still recommends the LV 2012 f1 patch as an urgent update, even after I installed the f3 patch.
Solved!
Go to Solution.

It's recommending the FPGA patch, not the LabVIEW core patch.
Chris M

Cannot start to install SM

Hi all
it show the followings error after start for install
Program is starting... Please wait!
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Exit status of child: 3
Regards.
Kevin

check link for loopback adapter installation. [http://support.microsoft.com/kb/839013]
check install guide for the appropriate JDK version for your installation.
C:\Documents and Settings\Administrator.OX01OX01>java -version
ava version "1.6.0_14"
ava(TM) SE Runtime Environment (build 1.6.0_14-b08)
ava HotSpot(TM) Client VM (build 14.0-b16, mixed mode, sharing)
http://service.sap.com/instguides

Service Station closes after starting after install of 3 Toshiba patches

Similar Messages

Maybe you are looking for