Service tab in ME52N

Hello,
We have an issue with number of columns in the services tab for an account assigned purchase requisition.
One user is able to see the Order number(account assignment) column in the Services tab in line item detail.
The other user does not see the Order number column.
Where is the control to set up the columns that we want to see in services tab?
Regards
Vignesh

Hi,
Make sure item category D is selected in Purchase Req or Purchase Order.
Thanks
Silas

Similar Messages

Issue in Service tab and Sourc of supply tab validation in ME51N/ME52N

Hello,
I have requirement in ME51N/ME52N transaction for Validation of service number (under service tab) asigned Agreement number (under Source of Supply Tab)
Requirement is like : get KONNR number(agreement number) from item level than get PACKNO fro EKPO table than get all the service number SRVNO from ESLL table.
now get all the service number from Service Tab at item level.
than validate service number in service tab should belongs to service number available only for selected KONNR number.
I tried with BADI : ME_PROCESS_PR_REQ but there is not a single method is available which will return SRVNO details .
and in user exits we also tried but not able to get correct exit or BADI which should return details of serviced numbers used in PR.
please help to find out the correct way or other solution for this.
thanks and regards,
Tamseel Hashmi

Hi,
Make sure item category D is selected in Purchase Req or Purchase Order.
Thanks
Silas

Exit ME52n for service tab

HI friends! I need some help. I have to validate data values for ME52n in service tab (this tab shows up when I select item with service in botton of screen).
I'm trying to use exit module from MEREQ001, like EXIT_SAPMEREQ_005 but I can't this services values in exit modules of MEREQ001, I can only get values from item but not from service tab.
How I can validate this data?
Thanks for any help!

Hi Fulvio,
If you want to validate the service line data, please use SAP Enhancement (SMOD) SRVESLL.
Regards,
Phil

Cant find HP Web services tab to find claim code

Hi
I am trying to set up HP ePrint on my HP Laserjet M1522nf printer connected to my home network. I am unable to find the claim code for my printer to set up the device on HP connected services.
I have entered the IP address on my web browser and entered the printer's configuration tab but i am unable to find the web services tab or the print info page for the claim code.
Please let me know how to find the claim code so that i could set up ePrint.
Thanks
Harish
This question was solved.
View Solution.

Ok judt realised this device is not eprint ready.
Please ignore my earlier post.

Table control View in Maintenance order Services tab

Hi Experts,
I am trying to change the table control fields of the services tab of the maintenance order , when we use PM03 control key to generate services PR.
I try to remove some check box which are earlier defined as invisible to make it visible. However after saving the system variant system doesnt take the changes. It is coming back to the original .
Here are couple of fields I would like to change the setting. As of now I am trying to change the below mentioned field to visible . Presently it is in invisible mode.
Fields
Formula::ESLL-FORMELNR,
Form values: ESLL-FRMVAL1 to ESLL-FRMVAL5 and
User field3: ESLL-USERF1_TXT
program name SAPLMLSP
Control TC_VIEW
I am following the below. Kindly let me know whether I am following the right step.
1) Click on tbale setting
2) CLick on administrator
3) Select the field and do the necessary change to make visible or invisible.
4)Activate
5)Close
6) save.
RG
Vinod
Edited by: vnodpm on Feb 6, 2012 7:07 PM

Hi,
The IMG customizing will have greater priority than the screen table controls (also specific program logic can supersede the table controls). Check the customizing for service screen at following path:
SPRO - Materials Management - External Services Management - Define Screen Layout
-Paul

HP LaserJet 600 M601 HP Web Services tab disappeared

Setup a new M601 yesterday. Networking and printing work fine, but when I would click on the "HP Web Services" tab and try to enable web services, it kept popping up an error and tell me to check proxy settings. No proxy. Installed the most recent firmware (2200643_22834) and logged back in. Networking and printing working fine. Now the "HP Web Services" tab is gone! Ran through the firmware update again, same result. Would try to access it by direct url, but I have no idea what it is.
Where can I get the original firmware?
Does someone know the URL so I can try to directly access the page, should look something like, https://192.168.x.x/hp/device/???
Any other ideas? Is there some sort of console command line access for this printer?
Thanks, hope someone can help with this.

Hi there
I hope you are doing well and I hope you do not mind a suggestion
Your M601 is a commercial product. I suggest posting in the forum for HP Business Support for a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

MAKING UNLIMITED INDICATOR AS GREY MODE IN SERVICE TAB OF SERVICE P.O

Dear cons
In service purchase order we want to make unlimited delivery indicator in a grey mode in service tab. I tried in screen layout of purchase order. In purchase order there are two field of unlimited indicator. One is available in delivery tab of p.o in item details screen. Another is also available in service tab of p.o in item details screen. When I made setting in screen layout at document level I saw the unlimited indicator became grey in DELIVERY TAB of the P.O. But my requirement is to make the setting in a grey mode in service tab of the p.o. how can I do it.Because we have created a ser. p.o of service of 10piece. but the user has activated unlimited indicator in service item . we want to make setting so that the system will not allow to activate the un limited indicator.pl. solve it.
nrk

Hi
Try this in external service management:
MM-> external service management -> define screen layout -> choose ME21-> copy it as ME21n (tcode) -> under quantity tab -> make Overfulfillment tolerance % & Overfulfillment tol. unlimited as hidden/ display.
So if you ME21n tcode then these fields will be hidden/ display.
Thanks

Services tab in Service Purchase Order for Limit SC is not filled in

Hello All
As per the standard behaviour if a Free text SC is created for Services , the PO is created with one line item having description as " service item " and under the Services tab we can see the line items.
But when we create a SC from Limit for Services ( if we select Confirmation and Invoice ), The PO is created just like normal PO with item category as "D" and we do not see any line item in the Services tab in the PO.
Could you please let us know why this difference between Free text SC and for Limit SC.
Thanks in Advance.
Regards
Bharath Valleri

Hello Bharath,
What you describe is standard.
1- Limit SC
A limit item in SRM can give two kinds of R/3 PO items:
b- If you set "Invoice and confirmation" during Limit SC item creation, this means you will confirm your item, so R/3 PO item for service can only be created as category item "D",
Nevertheless, for your R3 PO item, you have populated an expected value (and you can fill in also an overall limit if check box "Unlimited" was not set at SC item creation).
That's why "Service" tab is empty. The "Limit" tab is populated in this case: confirmation will be done according to PO item expected value and not according to PO item quantity
a- If you set "Invoice only"during Limit SC item creation, this means confirmation is not allowed for you item, so R/3 PO item can only be created as item "B" (blanket). Blanket PO cannot be confirmed.
2- Free text SC
For a free text SC item with product type "Service", R/3 PO item will be a "D" category item.
"Service" tab is filled in with quantity and net price: confirmation will be done according PO item quantity.
So, main difference between Free text SC and Limit SC is quantity or expected value based confirmation.
Regards.
Laurent.

Actual quantity in service tab page becoming zero after updation

Dear friends,
We updated validity start date, end date in header and the field "form.val.2" in service tab page in item details of a service line item(item category D) in a Purchase order using the function module 'BAPI_PO_CHANGE'. After updation we observed the actual quantity (which denotes the total GR qty) becoming zero, making the PO completely open and allowing creation of service entry sheet for full quantity. This happend for so many POs. Now we want to correct the actual quantity. But as it is in display mode it now become difficult to change the actual quantity through any function module.
Seeking for a genuine solution about how to correct the actual quantity.
Regds
Amitava

hi
check this sap note 938498 BAPI_PO_CHANGE: Reference update for a service item

Pull Service tab data from Contract to Purchase order

Hi All,
I Just want to know if is possible to pull service tab data from contract to purchase order. When i create PO w.r.t Service Contract the data from the service tab is not pulled. So need help on how can I pull.
Please help..
Thanks,
Ros

Hi if u r referring service contract maintain it in the line item (Outline agreement no). All the other details will copied from Contract.
Check it out
Regards,
Raman

Error Accessing Services tab in Portal Application.

Hi
I have successfully connected to Oracle UCM server from JDeveloper and Now I can see my folders and files that I have created in UCM from JDeveloper. But When I run the application and go to services tab It gives the following error. I have also enabled folder_g and disabled framework folder.
In popup
Messages for this page are listed below.
Could not retrieve members from policy store"
and Under services tab
The Documents service is unavailable.
Documents service is currently unavailable as there is no default content repository connection."
Thank you,
Muhammad Nasir

Hi,
You shouldn't use the response object directly
Instead, create a new HttpServletResponse reference from the componentRequest object.
Try using the following:
long length = file.length(); // where 'file' is a File() object of your sTITLE +".pdf" file
// Create the byte array to hold the data
byte[] bytes = new byte[(int)length];
int offset = 0;
int numRead = 0;
while (offset < bytes.length && (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0) {
offset += numRead;
//The most important part:
HttpServletResponse res = componentRequest.getServletResponse(true);
res.setContentType("application/pdf");
res.addHeader("Content-Disposition", "attachment;filename=" + sTITLE +".pdf");
res.getOutputStream().write(bytes);

Missing agent, trap,security tabs in snmp service tab!

Missing agent, trap,security tabs in snmp service tab after installing snmp from powershell script!!
I run the script on win server 2008 and 2012
Could someone help..
Thanks for the help in advance
Ashwini

Hi Ashwini,
To install the snmp service, please refer to the script below:
#Import ServerManger Module
Import-Module ServerManager
#Check If SNMP Services Are Already Installed
$check = Get-WindowsFeature | Where-Object {$_.Name -eq "SNMP-Services"}
If ($check.Installed -ne "True") {
#Install/Enable SNMP Services
Add-WindowsFeature SNMP-Services | Out-Null
After installing this service, please try to reboot if you can, and check the tabs, a similar dscussion is for your reference:
How to configure SNMP on Windows 2008 Server
If there is anything else regarding this issue, pease feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Cusotm data tab In ME52n, copy release strategy tab details in custom tab

I have created a custom data tab in Me52n using exit mereq001, and I need to get purchase requisition number, releasegroup, release code and release strategy values in the custom data tab screen in order to fulfill my requirement.
I am using the screen exit and trying to code in the include (PBO), But in the include I am not able to get the required data as afore said.
Can you please tell me the procedure for getting the global structure that I can use in the include to get these values?
*Please give me the solution ASAP.

HI,
Use the fm EXIT_SAPLMEREQ_001 and get the data ..............
data : wa type mereq_item .
call method im_req_item->get_data
receiving
re_data = wa
the structure wa will contain the data .....
Thanks,
Shailaja Ainala.

Edit Service tab Screen settings

Dear experts ,
I want the field "Actual Quantity " to be displayed in the service tab layout .
I am able to make other fields visible n all , but Actual Qty field is skipped by the system .
Pls trell me what coud be the reason ?
All screen settings are fine as i can see that the "invisible tick box " is not marked for actual qty .
Pls help
Is there anyewhete else that i need to make settings ??
Regards
Anis

Hi
Check in ML90 - for field status groups say PT9 (service item), NB (standard PO) or ME21 - in quantity fields - entered quantity is in hidden status? Make it optional and then try.
Thanks

PM Operation - Services Tab Layout

All,
In a PM Order, I am trying to maintain the Field layout on the Services tab of the Operation Detail screens when I have the control key set with {X-"internally processed operation/external processing possible"}. With that setting in the control key, the "Gross Price" field is not visible. My objective is to have the field visible, but administering the layout through the transaction is not working.
Is anyone familiar with an IMG Activity that will allow me set the Services tab layout for that control key? It is not in the Operation Detail Filed Selection IMG Activity, and the screen field is "ESLL-TBTWR".
Thanks,
Jim

I understand that '' is the external services setting. But why does the 'x' setting change the layout of the services tab to not include Gross Price? The purpose of that 'X' setting is to allow for internal OR external processing. It won't generate a purchase req if the setting is 'x' but I'd expect to be able to enter gross price per unit in the services tab, just like it is for the '' external setting. Or I expect to be able to modify the tab layout.
(both cases the Service box is checked)
Any ideas why i can't change the layout of the services tab? Any ideas why the services tab changes depending on the externally processing option?
Thanks,
Jim

Service tab in ME52N

Similar Messages

Maybe you are looking for