Service templates for System Center components

Hi there,
According to Microsoft a set of service templates would be provided after the release of VMM 2012 R2.
These service templates can be used to deploy all System Center components as VMs through VMM. But I can’t find them..
Anyone knows when these service templates will be released? Perhaps they are already available.
Would speed up things dramatically!
Many thanks!
Martijn

They are trickling out..
And, it is tied to the Azure Pack Gallery feed.
Download Windows Azure Pack Gallery Resources
Install the Web Platform Installer
Windows
Azure Pack Gallery Resources can be downloaded with the
Microsoft Web
Platform Installer
You must download and install this free tool to obtain new Gallery Resources.
Add the Service Model feed
Start the Web Platform
     Installer.
Click the
Options link at the bottom of the
     window.
Enter following link into the
     Custom
     Feeds text box.
          http://www.microsoft.com/web/webpi/partners/servicemodels.xml
Click the
Add Feed button.
Click
OK.
A
Service
     Models option
     should appear at the top of the window.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Similar Messages

  • Import System Center Monitoring Pack for System Center 2012 - Service Manager into SCOM 2007 R2

    I would like to know if there is SCSM 2012 SP1 MP available for SCOM 2007 R2 ?
    I downloaded the "System Center Monitoring Pack for System Center 2012 - Service Manager" MP from
    http://www.microsoft.com/en-us/download/details.aspx?id=29980 and then import into SCOM 2007 R2, however, I found that there are some MP dependencies issue.
    For example, the "Microsoft System Center Service Manager Library" MP requires "Microsoft SystemCenter Library" and "System.Health.Library" MPs of version 7.0.8427.0. Howerver, the "Microsoft SystemCenter Library"
    and "System.Health.Library" MP in SCOM 2007 R2 is of version 6.1.7221.0

    Import Management Pack from DVD disk SCOM 2012 R2
    SW_DVD5_Sys_Ctr_2012_R2_English_OpsMgr_MLF_X19-18307.ISO\ManagementPacks
    Have a nice day !!!

  • Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

    Hi,
    I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
    I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
    I have followed the installation document & getting an error while configuring VMM for System Center 2012.
    error details from log file given below:
    01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
       at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
       at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
    01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
    01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
    01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
    01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item.  Setting rollback.
    01:12:24:SetProgressScreen: FinishMinorStep.
    01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
    I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
    An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    I have checked that the following services are running:
    1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent)  3)SC VM Manager Agent  4)  Windows management instrumentation .
    I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
    Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
    thanks.
    ====

    Have you installed AppController on the same machine with VMM?

  • UCS Management Pack for System Center 2012 OpsMgr add monitor wizard error

    We're successfully using the 2.6.0.179 version of the UCS Management Pack for System Center 2012 Operations Manager in our 2012 SP1 OpsMgr environment; however, in the new 2012 R2 OpsMgr environment we've stood-up and in which we installed the 2.6.2.0 version of the UCS MP, we're getting an error when trying to run the Add Monitoring Wizard under the Management Pack Templates node of the Authoring pane. We get the same error from the 2.6.1.0 version of the UCS MP as well. The text of the error is as follows:
    "The page [Cisco.UCS.MP.UI.Proxy.Template.Page.ProxyDetailsPage] in the assembly [Cisco.UCS.MP.UI.Culture="",PublicKeyToken="6c96076cdf2c87a",Version="2.6.0.0"] could not be loaded. Please make sure that the account you are running under has sufficient privileges to load the given assembly, or the management pack that defines this page is installed or the assembly containing the page is in the path of the executible or that the page derives from known Operations Manager page type."
    I'm an admin user in OpsMgr, so this should not be a user privilege issue, and that leaves the MP itself. The fact that a 2.6.0.0 version is mentioned makes me wonder if the base version of the MP must be installed before the 2.6.2 version. I'd test this, but we no longer have that version, and its no longer available for download from Cisco that I can see.
    Has any dealt with this issue successfully, or have any insight into the problem?

    Solved...the requirement is that you must do the MP configuration from the SCOM console on the SCOM Management Server where you installed the Cisco UCS MP; you can't do it from a SCOM console on a remote computer like I was trying to do.

  • VssNullProver stopped after installing Update Rollup 3 for System Center Data Protection Manager 2012 R2

    I recently installed Update Rollup 3 for System Center Data Protection Manager 2012 R2.
    As part of the update I updated all DPM Agents, including the ones on our Hyper-V Servers (which are part of a cluster). I also rebooted every DPM Protected Servers. After reboot all Hyper-V Servers raise a warning that the VssNullProvider service has stopped.
    Backup seems to work properly. I can start the VssNullProvider service manually. But after the next backup the service it is stopped again. Exactly the same issue occurs on our test Hyper-V Cluster. All our Hyper-V Servers run Windows Server 2012 R2 and
    we use System Center Virtual Machine Manager 2012 R2.
    Something is not ok with Update Rollup 3. Any suggestions?
    Boudewijn Plomp, BPMi Infrastructure & Security
    Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".

    Hi
    SEE NEW BLOG:
    Support Tip Service Manager alert for the VSSNullProvider service after installing
    DPM 2012 R2 UR3
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
    posting is provided "AS IS" with no warranties, and confers no rights.
    Thanks!
    Boudewijn Plomp, BPMi Infrastructure & Security | Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".

  • Configuration issue on two items for system center 2012 config manager

    My first issue was at the beginning of the install trying to extend the AD schema for system center 2012 config manager version 7.5.1561.0. The
    path is missing for SMSSetup\Bin\x64\ to execute
    Extadsch.exe is not on my disc. There is only a x86 and 64 bit folder with no bin.
    Second issue when creating configuration manager connector. Error connecting to the database. So i went to my sqlserver and checked the permissions on the account I did notice that there are no smsdbrole_extract role permissions. Did I miss a step somewhere
    along the way? On a side not that this is an instance and not under the default place. Also, i am using sql 2008 R2 version.

    OK, nothing wrong with that per se, but it has nothing to do with ConfigMgr. Also, ConfigMgr is not a "module", it's a distinct product unto itself with its own unique requirements and dependencies that is also architecturally completely different. So,
    there's nothing to uninstall to install ConfigMgr. Also, I hope you're not trying to install these products on the same server. That is OK for a small lab environment, but nothing more. Even then, I wouldn't do it since its never something you'd do in production.
    As mentioned, each product has its own unique dependencies with no true overlap.
    Jason | http://blog.configmgrftw.com

  • Error installing DPM Agent in Update Rollup 5 for System Center 2012 R2 Data Protection Manager

    I have updated my main DPM server to Update Rollup 5 for System Center 2012 R2 Data Protection Manager and all went well.
    All Protected servers updated and rebooted and continued protection - EXCEPT one;
    Physical Windows Server 2012 R2 Datacenter.
    Tried Manual install - no luck
    Removed Protection Agent / rebooted / re-installed - no luck
    Installed all updates / re-install - no luck
    this seems to be the only indicated problem in MSDPMAgentInstall.LOG.....
    Property(S): PATCHMediaSrcProp = C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\RA\4.2.1292.0\DPMProtectionAgent_KB3021791.msp
    MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent - Update 'Microsoft System Center 2012 R2 DPM Protection Agent Update - KB3021791' could not be installed. Error code 1603. Additional information is available in
    the log file C:\Windows\\Temp\MSDPMAgentInstall.LOG.
    MSI (s) (04:34) [09:24:23:772]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft System
    Center 2012 R2 DPM Protection Agent Update - KB3021791. Installation success or error status: 1603.
    MSI (s) (04:34) [09:24:23:772]: Note: 1: 1729
    MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2:  3: Error
    MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2:  3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1729
    MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2:  3: Error
    MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2:  3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
    MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent -- Configuration failed.
    MSI (s) (04:34) [09:24:23:772]: Windows Installer reconfigured the product. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success
    or error status: 1603.
    Any help would be greatly appreciated.

    Hotfix for known issue with Update Rollup 5 for System Center 2012 R2 Data Protection Manager
    http://www.microsoft.com/en-us/download/details.aspx?id=45914&WT.mc_id=rss_alldownloads_all
    Have a nice day !!!
    DPM 2012 R2: Remove Recovery Points

  • BRD Template for Contact Center Solutions

    Hello All,
    Can you any body have Business Requirement Gathering Template for Contact Center Solutions?
    I really appreciate if you can share me.
    Or We have to follow Order tools only.

    Cloud Management Suite is a cloud-based solution revolutionizing the way IT professionals engage in endpoint device management. Cloud Management Suite uses best-in-class agentless technology, requires only a web browser to deploy and can easily and quickly scale up to as many as 35,000 endpoints within an enterprise.Presented on August 14, 2015, in Norwalk, Connecticut, these awards are regarded as some of the most prestigious and respected honors in the communications and technology sector worldwide. Winners represent prominent players in the market who consistently demonstrate the advancement of technologies. Each recipient is a verifiable leader in the marketplace.“It is especially gratifying to have Verismic’s Cloud Management Suite receive this prestigious recognition before we celebrate its first anniversary on the market,” says...

  • Dell Command | Integration Suite for System Center Warranty Status integration to SCCM database

    So does anyone know if the new Dell Command | Integration Suite for System Center 4.0 has the same capability as DCIP 3.1 to add the warranty status to the SCCM DB? I can't seem to find any info on it.
    http://www.techygeekshome.co.uk/2014/01/report-on-dell-warranty-statuses-for.html

    delltechcenter.com may be a better place to ask this question.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Virtualization service status - unknow system center 2008

    hi . 
    i installed system center 2008 on a 2012 server , 
    i created several machines on it and they are working fine ... the problem is i cannot do any action like clone or create check points or migrations from system center .. 
    beside every vm there is a message host is not responding and in the properties of the hyper v host error virtualization service status - unknow  but all other options are checked ok 
    i ve 2 network cards on the host server one is used for the virtual machines and the other is for the local network 
    all machines are assigned to that virtual network card 
    please advice on solving this issue 

    Of the 18 or so machines, most have not been frequent repeat offenders (popping up only every few days) but there are a few that have been somewhat daily offenders. I have removed the client, rebooted, reinstalled the client manually on the heavy offenders
    and this has not corrected the issue.
    When I RDP to the machine and try to stop the System Center Management service it take awhile (30+ seconds) and then I get an error stating:
    Windows could not stop the System Center Management service on local computer. Error 1053: the service did not respond to the start or control request in a timely fashion.
    The when I click OK the service is stopped and I then start it. If I stop it again it takes like 5 seconds and does not give any error.
    From looking at the Operations Manager event viewer I have multiples of:
    A scheduled discovery task was not started because the previous task for that discovery was still executing. Event ID 10000
    The Windows Event Log Provider monitoring the Application Event Log is 1124 minutes behind in processing events. 
    This can occur when the provider is restarted after being offline for some time, or there are too many events to be handled by the workflow. Event ID 26017 (note on this one, this occurs right after the nightly reboot) --- I flushed the Health Service
    State and Cache, still get the System Center Management service to stop responding within an hour and a heartbeat failure on SCOM.
    No firewall.
    AV (Symantec Endpoint Protection)  is clear with the same setting as all the servers.
    These servers that keep having the issues do have citrix loaded but again, nothing has changed on the client (servers) side from SCOM 2007 to SCOM 2012 and we never got these in 2007, just 2012.
    As for the “ServicesPipeTimeout” I could not locate a key in the registry with that value.

  • What is the alternative to TMG/ISA For SSL-Bridging-Capable Reverse Proxy For System Center 2012 R2 IBCM?

    When I look up alternatives to TMG many other answers say something like "Don't worry about it. TMG 2010 is under support until 2020."
    Well, we don't have TMG and can't buy it since it is off the market.  Can it still be legitimately purchased through any resellers?
    We need a reverse proxy that specifically supports SSL-Bridging so that device certificate authentication is not broken when the connection passes through the proxy.
    Which reverse proxies that are currently on the market are known to work successfully with System Center Config Manager Internet-Based Client Management and also with other Microsoft products such as Lync 2010 and RD Gateway 2012 R2?
    Do any Cisco ASA or ACE models support the required functionality for machine certificate authentication?
    We have ISA 2006 licenses available, but I would hate to roll that out and then have to replace it in only 2 years rather than using something that can stay in place long term.  Maybe we could use ISA 2006 temporarily as a stopgap if the next version
    released of Windows Server Web Application Proxy would meet the requirements and can be deployed in production before ISA 2006 is completely EOL.
    I hate that Microsoft keeps discontinuing all the related products to this before they have their replacements ready.

    Hi,
    You are correct, all TMG product sales officially ended in December 2012.
    In addition, an ISA Server and a TS Gateway server can be used together to enhance security for remote connections to internal network resources. However, it
    seems that ISA 2006 cannot support that on Windows Server 2012 R2. For more detailed information:
    Configuring the TS Gateway ISA Server Scenario
    Personally, Web application proxy would be an alternate. In addition, for the question related to Cisco product, you can contact Cisco for assistance.
    Best regards,
    Susie

  • Update Rollup 8 for System Center 2012 SPM - DPM Error

    Hi,
    I am trying to install the above security update onto my 2012 DPM server but it keeps failing.
    MSI (s) (64:EC) [11:16:20:172]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
    Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 1729
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.
    I see there is a forum article for dpm 2012 Update Rollup 3  could not be installed, however nothing for Update 8.
    Is the fix the same?
    Thanks
    Simon

    Hi,
    I am trying to install the above security update onto my 2012 DPM server but it keeps failing.
    MSI (s) (64:EC) [11:16:20:172]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
    Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 1729
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
    MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
    MSI (s) (64:EC) [11:16:20:188]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.
    I see there is a forum article for dpm 2012 Update Rollup 3  could not be installed, however nothing for Update 8.
    Is the fix the same?
    Thanks
    Simon
    Facing Exact same issue. Below is log:
    MSI (s) (80:84) [00:37:39:482]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager - Update 'Microsoft Data Protection Manager 2010 Update - KB2991995' could not be installed. Error code 1603. Additional information is available in the log
    file C:\Program Files\Microsoft System Center 2012\DPM\DPMLogs\DataProtectionManager-KB2991995.log.
    === Logging stopped: 3/9/2015  0:37:39 ===
    MSI (s) (80:84) [00:37:39:482]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
    Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 1729 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
    MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038 
    MSI (s) (80:84) [00:37:39:497]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.

  • VHD for System Center Configuration Manager 2012 R2

    I just downloaded of TechNet the VHD of System Center Configuration Manager 2012 R2.  However when you bring it online it is in the domain Conteso. I have searched all over TechNet and the web, but there is no record of the admin password nor is there
    any documented instructions with the download.
    http://www.microsoft.com/en-us/download/details.aspx?id=40840
    Best regards,
    Dave Clauson
    Partner Online Technical Community
    We hope you get value from our new forums platform! Tell us what you think:
    http://social.microsoft.com/Forums/en-US/partnerfdbk/threads
    This posting is provided "AS IS" with no warranties, and confers no rights

    Hi,
    I think you should find the password for Windows Server 2012 R2. Please try
    R2Preview!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Active Directory Domain Services(2012 R2) Management Pack for System Center 2012

    Hi
    I went to the Microsoft site and not able to find the ADDS 2012 R2 mp for SCOM 2012 R2. It looked strange to me
    I went to the http://www.microsoft.com/en-us/download/details.aspx?id=21357 site and extracted the file and file contains the mp file for 2003 and 2008.Is something i am missing or someone can share the download link for ADDS 2012 R2 mp?
    Donald D'souza (http://donald-scom.blogspot.com/)

    This is the one for AD 2012.
    Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

  • In-app vs 3rd party service purchases for call center

    Dear Support
    I am creating a service that gives an opportunity for a user to have audio / video consultation with a specialist sitting in my real-world call-center. My service has a web interface as well with the same functionality as the mobile app. 
    To be able to get a consultation user should buy "consultations" from either mobile app or website. Consultations purchased from web should be available in application for the same user and vice versa. So basically mobile application is just an extension of my business.
    Could you please advice should I use in-app or external payment gate in mobile app ?

    aasmbat wrote:
    Dear Support
    My service has a web interface as well with the same functionality as the mobile app. 
    Then an app isn't necessary according to the App Store Review Guidelines
    https://developer.apple.com/appstore/resources/approval/guidelines.html#function ality
    2.12 Apps that are not very useful, unique, are simply web sites bundled as Apps, or do not provide any lasting entertainment value may be rejected.
    The guideline does say "may" but your reason for having an app seems a bit weak.

Maybe you are looking for