Service to get XMIIIDOC01 listener status?

Hi
Is there a service to get the XMIIIDOC01 listener status
Thanks
Ajay.

Hi ,
As I understand from your question is, you want to check the status of XMIIIDOC01
Go to the MII Menu screen ---> Message Services ---> select the XMIIIDOC01 and click the status
If it properly configured with your SAP IDOC, it will show Server Connected and even you can see the SAP Server, SAP Client that columns.
If not, its show Server not connect. For this you need to go for SAP NetWeaver screen and configure the SAP details to your XMIIIDOC01(i.e. Configuration Management --> Infrastructure --> Application Resources --> select Resource Adapter --> select XMIIIDOC01 --> go to properties and update all the details of SAP).
Thanks,
Kind Regards,
Praveen Reddy M

Similar Messages

Job for httpd.service failed. See 'systemctl status httpd.service' and

Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)

I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one.

ORA-12514 & Listener Status Instance status Unknown issue

Dear All,
Database Version - 10.2.0.5.0
Operating System - Windows XP
I am using Oracle 10g version, which has two services (bit10g and ora10g) installed on it.
Service ora10g was working before upgradation of Database to 10.2.0.5.0 and it was fine.
On upgradation I was unable to start and connect using ora10g so I created another that is bit10g.
Service bit10g was working fine for quite a long time. The last I worked and connected was on thu and it was connecting with no issues.
Now when I am trying to connect to database today I am unable to connect as I am getting
ORA12514 - TNS:listener does not currently know of service.
Secondly I tried to search forums which guided me to check the Listener Status.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Admin>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.5.0 - Production on 12-JAN-2013 11:42
:54
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=toshiba-arif)(PORT=1521)
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.5.0 - Produ
ction
Start Date                12-JAN-2013 11:18:12
Uptime                    0 days 0 hr. 24 min. 43 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\ora10g\product\10.2.0\db_1\network\admin\listener.o
ra
Listener Log File         C:\ora10g\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=toshiba-arif)(PORT=1521)))
Services Summary...
Service "Oracle8" has 1 instance(s).
Instance "bit10g", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfullyFollowing is my listener.ora file
# listener.ora Network Configuration File: C:\ora10g\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = Oracle8)
      (SID_NAME = bit10g)
LISTENER =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = toshiba-arif)(PORT = 1521))
)Please note that I am a developer with no DBA exposure.
So please guide me so that I will be able to resolve my issue.
Thanks & Regards
Arif Khadas

Once again Thanks Paul for your quick response.
I also have Oracle 9i installed on my machine but the service and Listener for 9i is stopped.
Following is the tnsnames.ora for 9i
# TNSNAMES.ORA Network Configuration File: C:\oracle\ora92\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
BIT10G =
(DESCRIPTION =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = toshiba-arif)
(PORT = 1521)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = bit10g)
BIT_ORA9I =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = IAS)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORA9I)
ORA10G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = toshiba-arif)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ora10g)
ORA9I =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = toshiba-arif)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ora9i)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = AH-IBM)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
CRCPROD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.1.1.185)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = bridges)
IAS_ORA10G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = IAS)(PORT = 1522))
(CONNECT_DATA =
(SID = ORA10G)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
BIT_ORA10G =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = IAS)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORA10G)
)

Manual request for listener status/Tnsping/Agent Ping is possible in 10g

I want to see listener status like this from 10g GC.
Is it possible ?
LSNRCTL for 32-bit Windows: Version 9.2.0.3.0 - Production on 01-NOV-2006 10:06:40
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(HOST=server1)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
Start Date 20-OCT-2006 19:18:07
Uptime 11 days 15 hr. 45 min. 58 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File c:\oracle\ora920\network\admin\listener.ora
Listener Log File c:\oracle\ora920\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server1)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "db1" has 1 instance(s).
Instance "db1", status READY, has 1 handler(s) for this service...
Service "db1_prod-server1" has 1 instance(s).
Instance "db1", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully

I have noticed in your other posting as well that you want to make a lot of customisations. I would suggest you read more on EM from this link and see what you can achieve.
http://www.oracle.com/pls/db102/portal.portal_db?selected=21

Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405

Hi,
while consuming the WCF service POST method Jquery, getting error in Chrome and firefox, in IE Its working fine.
ERROR:Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405.
Jquery used to call:
$.support.cors = true
$.ajax({
type: "POST",
url: serviceURL,
data: JSON.stringify(managedProps),
useDefaultXhrHeader:false,
contentType: "application/json; charset=utf-8",
dataType: "json",
//processData: true,
crossDomain: true,
success: function (data, status, jqXHR) {
alert("sucess");
error: function (xhr) {
alert("error");
WCF sevice Web.config
<webHttpBinding>

<binding name="crossDomain" crossDomainScriptAccessEnabled="true" transferMode="StreamedResponse" />
</webHttpBinding>
</bindings>
<services>
<service name="DynamicRefinerWCF.DynamicRefiner">
<endpoint address="" behaviorConfiguration="REST" bindingConfiguration="crossDomain" binding="webHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<endpoint address="mex" binding="mexHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<host>
<baseAddresses>
<add baseAddress="http://localhost/example.svc" />
</baseAddresses>
</host>
</service>
</services>


</system.serviceModel>
<system.webServer>

<modules>
<remove name="WebDAVModule" />
</modules>
<handlers>
<remove name="WebDAV" />
</handlers>
<directoryBrowse enabled="true" />
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*"/>
<add name="Access-Control-Allow-Headers" value="Content-Type"/>
<add name="Access-Control-Allow-Methods" value="GET, POST, PUT, DELETE, OPTIONS"/>
<add name="Access-Control-Request-Headers:" value="*" />
<add name="Access-Control-Request-Method:" value="*" />
</customHeaders>
</httpProtocol>


</system.webServer>
</configuration>
Thanks,
Swathi

Right on - I have done that a number of times.

Hyperion System 9.3.1 Services are getting hang... on AIX box.

Dear All,
We have installed & configured Hyperion System 9.3.1 on IBM AIX 5.3 ML-6, 6 dual core CPU & 24GB RAM. Repository database is Oracle 10gR2.
We have scheduled approx 300 Interactive Reporting Jobs in Workspace which has been associated with external trigger events. Once these jobs get executed their output has been imported in the various folders on Workspace.
We are getting following errors in <HYPERION_HOME>/log/BIPLUS/ server_messages_IRJobService.log file when these jobs get executed:
<message><![CDATA[Out of Memory. Advice: Close other applications or windows and try again.]]></message>
And
In <HYPERION_HOME>/BIPLUS/logs/ 0_bijobs_stderr.txt getting bellow error:
*** PROCESS OUT OF MEMORY, EXITING ***
*** PROCESS OUT OF MEMORY, EXITING ***
SIGNAL SIGABRT Generated at Wed May 21 16:19:29 2008
by thread 1287
+++PARALLEL TOOLS CONSORTIUM LIGHTWEIGHT COREFILE FORMAT version 1.0
+++LCB 1.0 Wed May 21 16:19:29 2008 Generated by IBM AIX 5.3
+++ID Node 0 Process 25490 Thread 7
***FAULT "SIGABRT - Abort"
+++STACK
abort : 0x000000e8
# At location 0xd015f47c but procedure information unavailable.
write_string__16IT_CDR_OutStreamFPCc : 0x000001c0
marshal_request__29IT_GIOP_ClientInterceptorImplFR16IT_CDR_OutStreamPQ2_10IT_Binding13ClientRequestUlT3sPQ2_6IT_IOR16ObjectKeyProfile21IT_GIOP_ResponseFlags : 0
After this Hyperion Services are getting hang. In Workspace - View Job Status – showing that Jobs are executing.
Any help would be highly appreciated.
Regards,
Manmohan Sharma

The reason they run quicker the subsequent times, is because the data has already been cached in the system.
You could try the usual tricks to speed the report up:
- move items into POV
- have children and parent in the same row
- arrange dimensions in inverse outline order
- remove excessive formatting
- push report calculations back to the data source
We have found that using lots of dynamically calculated members also slows down reports, so try and limit the number of these.
Hope this helps. If not maybe give us an idea of how the report is created to see if other changes could be made.

Service 'MSExchangeADTopology' failed to reach status 'Running' while installing Hub transport role of exchnage server 2010 sp1 on Window Server 2008 r2

Hi
Getting this error while installing hub transport role of exchange server 2010 sp1 on window server 2008 R2.
Hub Transport Role
Failed
Error:
The following error was generated when "$error.Clear();
          if ($exsSid -eq $null -or $exsSid -eq "")
          $exsSid = get-ExchangeServerGroupSID -DomainController $RoleDomainController
          start-setupservice -ServiceName MSExchangeADTopology -ServiceParameters $exsSid,$RoleDomainController
        " was run: "Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.".
Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
Elapsed Time: 00:25:35
Sandeep Gupta

Hi,
It might be a permission issue.
1 :
Add Manage auditing and security log Properties
Administative Tools > Local Security Policy > Local Policies > User Rights
Assignment > Manage auditing and security
Add
Exchance Servers.
2. Check Exchange Trusted Subsystem
1)Open Active Directory Users and Computers
2)Under domain name (For example contoso.com),navigate to the Builtin Container,on
the right hand side select the Administrator group,goto the properties
3)Click members tab and add Exchange Trusted Subsystem
4)Click ok twice
5)Reboot the Exchange server
6)Rerun the Exchange setup
Best Regards!

Channels getting in scheduled status

Hi ,
All the channels in PI is getting in scheduled status , the channels were working fine till 1 PM , but all of a sudden the status oof massages are going to scheduled state.
There is no blocked queue in SMQ1 and SMQ2 , even there is no error in RZ20 .
Please help , this is a prod issue

hi,
*Whenever we set the sender communication channel as FTP/NFS and Quality of Service as Exctactly Once in Order ....*
*Sometimes, the status of the messages in the message monitoring of the adapter framework is Holding status.*
*To clear the holding status messages from Adapter engine ............*
*process*
*http://hostname:port/MessagingSystem -click on EOIO Sequence monitor.*
*If messages are stuck then you can see HOLD and NDLV status.HOLDreprasents holding the messages in adapter engine in EOIO queue.NDLVreprasents the messages not delivered to Integration Server.*
regards,
kesava

How can I get the report status?

I am using web service to connect to BI Publisher and run the report by java code. And I have questions still unclear, anyone who knows about it please help me.
1. Is there any method to get the report status, such as whether the report runs successfully or not.
2. If I have a huge table that binds with the template (maybe RTF template), how about the performance of the BI publisher?
3. I use the sample codes in the web service tutorial to run the report, but the out pdf report doesn't change when i add or remove the table data, how can I resolve it?
Thanks very much.

Use the web services and use this function
getScheduledReportStatus
you will get the status of the report ran.
Possible values are: "Completed", "Error" "Running", "Scheduled","Suspended", "Unknown"
It is in the table XMLP_SCHED_OUTPUT status column :)

'Services.exe Terminated Unexpectedly with status code 128' on SAP server

get message 'Services.exe Terminated Unexpectedly with status code 128' on SAP Server when start windows 2000. & SAP server shut down

Hi,
Please check the link below.
http://support.microsoft.com/kb/318447
Rgds,
Suman

Local listener status showing local virtual ip, but not local ip

Hi,
SNRCTL> stat LISTENER
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production
Start Date 19-JAN-2013 00:50:10
Uptime 0 days 0 hr. 29 min. 51 sec
Trace Level off
Security ON: Local OS Authentication
SNMP ON
Listener Parameter File /grid/app/11.2.0/grid/network/admin/listener.ora
Listener Log File listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.9.50.231)(PORT=1521)))
Services Summary...
In every oracle documentation for e.g:11.2 Scan and Node TNS Listener Setup Examples [ID 1070607.1] we found the local listener status showing both local-ip and vip. Why is not showing in our case? What to do?
Please suggest.
Regards,
Saikat

Hi,
Thanks a lot for your valubale answers.
*1)In 11gR2 RAC I found that listener.ora is used from grid_home and there is no i/p, port no etc. Just key is present . But the status o/p shows ips,hots,ports. Does the oraagent process picks up those information from crs?*
[grid@VM-PAGRAC3 admin]$ more listener.ora
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER))))
# line added by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_S
CAN1)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by
Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
[grid@VM-PAGRAC3 admin]$
LSNRCTL> stat
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date 25-JAN-2013 10:53:17
Uptime 4 days 9 hr. 13 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/11.2.0/grid/network/admin/listener.ora
Listener Log File /oracle/app/oracle/diag/tnslsnr/VM-PAGRAC3/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.17.0.129)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.17.0.133)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Service "PAGRAC" has 1 instance(s).
Instance "PAGRAC1", status READY, has 1 handler(s) for this service...
Service "PAGRACXDB" has 1 instance(s).
Instance "PAGRAC1", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
2.What is the purpose of endpoint_listener.ora?
[grid@VM-PAGRAC3 admin]$ cat endpoints_listener.ora
LISTENER_VM-PAGRAC3=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=VM-PAGRAC3-vip)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=10.17.0.129)(PORT=1521)(IP=FIRST)))) # line added by Agent
[grid@VM-PAGRAC3 admin]$
It seems lots of changes have beeen done in 11gR2 related to listener. If you kindly help me regarding this I willl be grateful.
Thanks a lot!
Saikat

Listener status during upgradation

Hi all,
We are upgrading 10.2.0.4 enterprise edition single instance to 11.2.0.3 enterprise edition single edition manually. What should the listener status while doing upgradation. This is my first upgradation project. Please suggest.
Thanks
Sandy

Normally when you do an upgradation, the database services needs to be down with only the database being opened with the option "startup upgrade".
The listener on the database server to be upgraded needs to be down. Make sure you take the backup of the listener.ora and the tnsnames.ora file located in the 10g Home and once when you plan up to delete this home after the database is upgraded to 11g, you have a new listener created with the 11g Home

Service Desk Unable to set status to Customer Action and Proposed Solution

Hi Everyone,
We are unable to set a service desk issue to the status Customer Action or Proposed solution.
I have someone create a new issue in the bakend system and when I receive the issue I assign it to myself as the processor. When I try to set teh status to Customer action it is grayed out.
I have checked the following:
1. As a test I assigned My user with sap_all profile so does not appear to be authroisation related
2. The status profile has all six standard values (New, customer action, In Process, Sent to SAP, Proposed Solution, Confirmed).
3. The transaction types have been defined using the standard profiles for Text Det. Procedure, Partnet Determination Procedure, Status Profile. The Partner Function ORG is set to Sold-To-Party , The date profile is a SRV_SLA_ITEM and the Action profile is set to SLFN0001_ADVANCED. The Org Data Prof is set to a customer defined one: ZSSC000000001.
4. I have checked transaction ppoma_crm and the org structure and my user is assigned to a team lead position.
Your assistance is greatly appreciated.
Michael

Hi Michael,
please check your status profile for the "lowest status no." and "highest status no." values of the status values as Alex mentioned!
You can find this in SPRO under "SAP Solution Manager> Scenario-Specific Settings>Service Desk>Service Desk>Status Profile".
If the "high" value of the status "New" is lower than the status number of status "Customer Action" than you can not set the message from "New" to "Customer Action"!
Hope this helps,
Christoph

Sales order item gets "Fully delivered" status even if partial qty

Hello,
We have a depot sales configuration in SAP. I found that some sales order lines are getting completed (delivery status "Fully delivered") even if partial quantity is pending for the order line. I checked the status in VBUP table where LFSTA gets the value "C" instead of "B". This is happening for some of the order lines (specially orders with small qty, just an observation).
Can anybody help to know why the delivery status change to "C" inspite of partial delivery.
Thanks,
Rajeev

Thanks for your help but your solution doesn't give any clue/solution to my problem
I checked the customer master for shipping-> Partial delivery tab for fully delivered & partailly delivered cases. All the customer masters have same setting. This is confired by checking in the table KNVV.
As explained earlier we have depot configuration & all Sales orders are created with item category "TAB" & there is no completion rule mentioned in VOV7.
Regards
Rajeev

How to get the Shipping status of a Invoice items in SAP?

Hi All,
Is there any way to get the Shipping status of a Invoiced Item ?
While i extracting Sales Invoice lines,i can get the shipping method and the shipping date,how can i confirm whether the item is shipped or not?.
Is there any table which contains the shipping status or any column in Invoice lines(INV1) which contains the shipping status?
Please help me to come out from that problem
Thanks
JanakiRaman

Hello Gilbert,
The column what you specified INV1.TRNSCODE is to know how the shipping was done. My question, Is there any field to specify the material was shipped or not?
Thanks
Janakiraman

Service to get XMIIIDOC01 listener status?

Similar Messages

Maybe you are looking for