Service to read the actual quantity produced

Hi,
I am very new to PLM.I wanted to know if there is any Enterprise service available for getting
the Actual quantity of material produced in an particular duration i.e if i give the start date and end date
then that service should return the Production information in that particular period.The production information should include the quantity of the material produced.
Thanks & Regards,
Sudhir

Sorry Sudhir
I dont have any information on that. Please try in SAP PP forum
Regards
gajesh

Similar Messages

How do I put timecode on the storyline. In FCP 7 there was a time code reader that read the actual TC on the source material. There isn't one in FCP 10.1...Any recommendations???

How do I put timecode on the storyline. In FCP 7 there was a time code reader that read the actual TC on the source material. There isn't one in FCP 10.1...Any recommendations???

TC has not been lost...skimmer shows source TC.
Nanoflash external recorder via SDI on a Sony PMW-EX3.
Ok so Compressor will show source TC on an individual clip, good I didn't know this and it will be helpful.
My scenario. I build a timeline with a whole days shooting involving many different clips and build a Sequence from that-editing out the off camera questions/mistakes etc. In the past I would export with source TC with a Timecode Reader filter applied. Now, it is a TC Generator filter that is available that starts from 00:00.
1. Possible solution, forget the source TC since I have a timeline built with (counter) TC on it and send that to client or get Apple to add it in the future.
2. Apply TC Generator on a clip by clip basis and manually change the TC to match source material. Probably too, much effort though.
Chris

Reading the indd files produced by the Adobe InDesign

Hi
I am looking for a freeware/shareware for Windows 8.1 Update that reads the indd files produced by each version of the Adobe InDesign.
Thanks
Bye

Instead, I was looking for a viewer of these files so that I can view them on any computer. Now, do you understand?
Thanks
Bye

How do I read the actual height of the panel title bar (or actual total panel height)

In Flex 4.5:
I have panel which is reading panel.height as 159, however it contains a swf in a swfloader which is 400 in height so it should be more than 400.
I need to know what the actual height of the panel is so I can scaleX and scaleY it to full screen height eg. scale=screenheight/panelHeight.
I know the content container will be 400 (the size of the movie) but can't read the height of the titleBar, and the overall panel height is returning the wrong value.

Spark Panels don't clip. Maybe that's what is going on? Also check the
measuredHeight of the Panel.

Actual quantity in service tab page becoming zero after updation

Dear friends,
We updated validity start date, end date in header and the field "form.val.2" in service tab page in item details of a service line item(item category D) in a Purchase order using the function module 'BAPI_PO_CHANGE'. After updation we observed the actual quantity (which denotes the total GR qty) becoming zero, making the PO completely open and allowing creation of service entry sheet for full quantity. This happend for so many POs. Now we want to correct the actual quantity. But as it is in display mode it now become difficult to change the actual quantity through any function module.
Seeking for a genuine solution about how to correct the actual quantity.
Regds
Amitava

hi
check this sap note 938498 BAPI_PO_CHANGE: Reference update for a service item

Correct actual quantity (QM - Inspection lot)

Hey,
I have two questions regarding this topic:
1) is it possible to correct the actual quantity inside an inspection lot that had already been skipped?
2) Can I also adjust the number of packaging pieces instead of only the kg's. For example: 10 barrels (1000kg) come in for inspection and 9 barrels (950kg) go out of it.
Thanks for replying!

Hello Philippe,
1) as long as nothin has been inspected in the skip lot and the UD has not been made you could use QAC1 to correct the inspection lot quantity.
2) using various MM transactions you can change the quantity in a quality inspection, the actual inspection size then has to be adjusted via QAC1. This can only work as long as no results have been recorded. Refer to note <a href="https://service.sap.com/sap/support/notes/485141">485141</a> for details.
Hope that this information helps resolve your issue.
Regards
Isabelle

How to read the DB application error in JSP

We have the PL/SQL triggers that perform validations on the insert and update. If validation fails the RAISE APPLICATION ERROR is used.
On error the errorpage.jsp is called correctly, but my problem is that I can not read the actual error message from database.
All I am getting from exception.getMessage() is the JBO message. The exception.printStackTrace() does not help either. How can I read text of PL/SQL exception message ?
I have tried this test in errorpage:
if( exception instanceof oracle.jbo.JboException ) { ...}
but apparently the exception is not JboException, since test fails.
I read about ApplicationModule.setExceptionHandler() and even build exception handler which does not do anything. I assumed that this would allow all exceptions to be passed to the error page. Nothing like that happens though. I still see only last JBO exception, I can not see the original DB exception.
Thanks in advance,
Michael

Hi ankur,
thanks for the quick reply,
I have got the answer for the first question.
Can u tell me solution for the 2nd question also. how to read the Portal user information in VC. like reading the Portal user information in webdynpro.
In webdynpro we can read any of the portal user properties or information like using the following code.
Itry{
IWDClientUser user = WDClientUser.getCurrentUser();
String fName = user.getFirstName();
String lName = user.getLastName();
}catch(Exception e){
In the same way to read the portal user information in VC. BCz for every portal user we have created one custom properties, we need to read that propety value in my vc application, when the user logged in to portal and accessing integrated VC application.
I have seen one of the thead this is possible from VC7.0 of NW2004s, current my version is also the same.
Portal 7.0
VC 7.0
If u know how to do that, can u let me know.
Regards
Vijay

ODI and Essbase in different server to read the file error

Hi,
I have ODI and Essbase installed in different server.
I have created an interface to execute a calc script on top of an essbase cube. I kept the Caclscript.csc file in one folder in ODI server and provide the path
EXTRACTION_QUERY_FILE parameter is the path of the .csc file i placed in ODI server. it executed successfully to generate the extract file using the calc script in the specified path on Essbase server.
Now i want to read that file and load it to a relational table so map the network drive from ODI server to Essbase server where the file has been generated and provided the EXTRACT_DATA_FILE_IN_CALC_SCRIPT parameter as the Network drive path but ODI is unable to read the file.
any other option to read the file reside in essbase server and load it to relational table.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Error occured while reading the data file produced by calculation script.
-KP

I would install an ODIAgent on the Essabse server and use this agent when running this particular operation

System should not allow me to create a PO more than the Maximum quantity.

Gurus,
My requirement is as follows.
I have a material with Max quantity defined as 100.
Now I have a stock of 60 & Open PO of 20 so the system should allow me to create PO only for 20 Qty.
It should restrict me if the Quantity exceeds 20.
Also inform us where to maintain the Max stock quantity for the material.
pl suggest
SN

Hello Sanjay,
There is no way to maintain the Max stock quantity for the material.
However, for the first issue, I would like to tell you that while creating PO in Item detail tab there is a tab of delivery. Under this tab you can set the under delivery or over delivery(as per your requirement).
for example, if you set the overdelivery to 10% and you created the PO of 100 quantity then you have the flexibility of receiving upto 110 quantity which is 10% more of the actual quantity.
If your point is something different from what I explained then kindly re-elaborate your query.
Hope this helps...
Robin

Actual quantity updation in COPA report

Hi Experts,
How to update the actual quantity in copa reports. At present we are getting the plan quality in copa reports. Any settings are missing or what could be the reason for this updation.
Can any one please clarify this issue
Regards,
Ram

Hi
If you are in MTO, follow the steps below to update sales Qty in COPA
1. Go to your PA Trf Str in KEi1
2. Add an assignment line to it, say, 100....
3. TICK the QTY BILLED/DELIVERED for this assignment line
4. DO NOT assign any cost element in SOURCE
5. Assign a COPA Qty Field for this assignment line
6. Execute VA88
Br, Ajay M

What is the activity quantity in KSII and how is it arrived

Hi,
Could any body help me to understand what is the activity quantity in KSII. How will we arrive at the figure we get when we run KSII.
I know the that we would be giving theplanned cost in KP06, planned activity quantity in KP26 and then when we run the price calculation in KSPI we get the total price for the cost center and the activity type. This is what is the planned total price for a period.
I am unable to understand the differece between the planned and the standard cost. Please help me with an example.
Standard cost is planned cost * actual hours, correct me if I am wrong.
Please assist,
Regards,
Shilpa.

Hi Shipla ,
You have two questions :-
1. How to get activity quantity in KSII
KSII is actual price calculation . Actual Price = Actual Cost/ Actual Qty..
Actual quantty is derived from quantity confirmed in production/process order and direct activity allocation done to the cost center . If you see a Cost Center Plan/Actual variance report.. you can see the actual quantity booked in a process Order . Actual Cost is the cost booked into the cost centers ..from FI/CO /IO settlement etc ..
During Actual costing , activity costs are generally booked at plan rate ( KP26). In KSII , actual price is computed and the difference is allocated to the cost centers.
2. Standard cost is planned cost * actual hours
No , plan cost is the cost you have planned for the year . You can use the plan cost to create a cost estimate . This cost estimate can be used as standard cost or for any anaylsis purpose..
Always remeber that purpose of product cost planning is to compute product cost estimate . This estimate may be used as standard costs.
Hope it clarifies..
Regards
Sarada

Quantity of photos per left panel and actual quantity don't agree

In the Library left panel under Folders, the number to the right of my folders does not agree with the actual quantity of photos in that folder. The left panel number is always more than the actual quantity. This is not true of all my folders and sub-folders but is for many. Does anyone have an idea what is going on? Thanks.
Mark

Hal,
I may not have explained my problem clearly enough so just to make sure we're on the same page, let me try again. In one folder, the number is the left panel states that there are 331 images. Yet in fact, there are only 329 images in that folder. I know this two ways. First, the index number only goes to 329. Second, I actually counted the number of images.
So please tell me again, what exactly would you like to see a screen shot of? I can show the left panel and the last image with the index number of 329. Is that what you are referring to?
Thanks.
Mark

Return Quntity is more the sales Quantity?

Dear All,
I sold the 100 material via Sales Order.
Now I am creating Return order with reapect to same Sales Order but system is allowing me to take more then 100 material as a return material.
and also system is allow me to create so many return order with respect to sales order.
How can i restrict it?. i think it is standard but how to restrict?
Regards
Jayesh

Dear Jayesh
Standard SAP functionality wont allow excess quantity in return order than the actual quantity despatched.
Anyway, Go to VTAF, select Return Order Type and Billing Type and click the blue lens on left top corner.
Now check the following:
a) On the left side, there will be three fields with "Data". In the first Data field, "052", second one should be "103" and third one should be "003".
b) Select the item category and click blue lens. Here again, on the left three "Datas" tab, first one should be "153", second one should be "104" and third one should be "004". On the right side, for "Copying Requirements", "303" should be there.
Most probably, in either of the above, the settings is missing and hence the problem.
Thanks
G. Lakshmipathi

I would like to know how to get the unrestricted quantity excluding actual customer ordr quantities on a given group of items?

I would like to know how to get the unrestricted quantity excluding actual customer ordr quantities on a given group of items?

Hi , Welcome to the HP Forums!
It is a terrific place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide.Learn How to Post and More I grasp you would like to replace the keyboard and would like the part number and where to purchase one. Here is a link to the HP Pavilion 17 Notebook PC HP Pavilion 15 Notebook PC Maintenance and Service Guide . Please note chapter 3, page 20, item 2 for the replacement keyboard part numbers. You stated you were having a difficulty locating where to purchase the part. Here is a link to HP Notebook PCs - Ordering HP Certified Replacement Parts for your convenience. You can also try a Google search with the part number for other vendors that may have one. To say thanks for replying please click the thumbs up icon below. If this has addressed your query please choose solution provided to help other people locate this information. Best of Luck!

Tracking the actual sale order quantity

Hi Friends,
How to track the actual sales order quantity given by the customer.
Ex: we assume the customer has placed an order of 100 units and stock is only 90 so we create the sales order for 90 units only.
How to find out the difference of 10 units as a report in standard sap system.
Thanks
AJ

Dear AJ,
This is how normal sales process works.
You create Sales Order line item for the quantity that customer has requested. (eg: 100)
Then you do a ATP for that Line item. Let's say you have only 90 in the stock. In that case system will confirm 90 for the sales order line item. (You can see the confirmed quantity in the Schedule line tab)
Normally we don't change the LI quantity as per the ATP confirmed quantity (i.e 90). Because then we loose the visibility to the customers original requested quantity (i.e 100).
Say you don't change your Line Item Order quantity to 90. Then your delivery & billing will be for 90.
So you can see in VA05, Order quantity as 100 and confirmed quantity as 90.
Your sales reports will show delivery & billing as 90. So that you have a clear visibility to the original order quantity, delivered quantity & billed quantity.
Further if remaining (open) quantity 10 is appearing your MRP & creating troubles, please use Line Item Rejection Reason as Completed. So that everything is perfect.
Coming back to your issue.
Since your changing LI quantity to 90, you cant see 100 in the VA05 report. It always show the existing sales order line item quantity, which is 90 in this example.
Only way you can find your original sales order quantity is in the Line Item / Change Log.
This can be view by selecting below Menu option.
Environment -> Changes
If you execute it for the relevant Line Item, you can see the Change log. In that by double clicking relevant quantity change line, you can see the old value & new value. (In this example 100 & 90)
But that is not a good practice to do as changes will show all quantity changes that you might do based on customer request. (Imagine if you customer ask to change it later to 95 not 100).
In that case change log will display 100 to 95, then 95 to 90. So your loosing the required visibility.
Hope this is helpful to you !

Service to read the actual quantity produced

Similar Messages

Maybe you are looking for