Service Type Templates

Hi all,
does anybody know if there will be more serivce type templetes available in the future?
For example for SRM, BW or CRM scenarios?
And if yes, how will they be accessible? Per Support Package or also as files to import?
Thanks!
Best regards, Rossi

Hi Rossi,
good question - actually I am working at the moment on SDN material about the upcoming release AccAD 2.2 (planned to go into Ramp-Up end of March).
One of the items planned to be available within AccAD 2.2 is a few more service types for commonly used SAP applications. However, most service types are rather considered as templates containing a few tunings settings for those applications - but not necessarily really application-aware caching mechanisms as in the Knowledge Management or Learning Solution optimizations.
So stay tuned for more information AccAD 2.2 - I aim to publish related blogs and presentations in the next few weeks. And of course as usual we are looking forward to customers and partners participating in the Ramp-Up and providing active feedback on the latest version.
Best regards
Jana

Similar Messages

  • Service Type Template "Print"

    Hello,
    in AccAD 2.2 in the service type template a template named "Print" is shown.
    Is there any documentation about that template?
    For example why is the compression deaktivated in this template?
    How must the Service Engine depending on that template be configured? (i think about that this service is on the cfe-side and the sfe is consuming this service by presenting it to the SAP-Systems in the datacenter??).
    Thank you,
    Best regards
    Stephan

    Hi Stephan,
    the service type print is a tcp-based service type with a default port typical for printers.
    The compression is turned off here in order to reduce load on the AccAD Engines when a large number of CFEs are supposed to connect to an SFE (typically with 50-70 customers the increased load of compression might become a bottleneck in the printing scenarios). Depending on your specific scenario, it might make sense to turn on the compression settings. Could you share how many CFEs you intend to connect per SFE? Then our development department might give an according recommendation ...
    The delivery is just configured as the delivery of any other service is delivered - so there should be no difference.
    Hope this helps, best regards
    Jana

  • About DTW - A/P Credit Memo for Service Type A/P Invoice

    Dear all,
    I would like to upload A/P Credit Memo with A/P Invoice Base Entry. The A/P Invoice is a "Service" Type.
    I am using oPurchaseCreditNotes object by providing:
    Documents (w/ cardcode, docdate, docduedate and taxdate)
    Documens_Line (w/ BaseEntry, BaseLine and BaseType)
    There is an error "Item No. is missing".
    any ideas.
    Thanks

    Have you add DocType as dDocument_Service on the Document template?
    Thanks,
    Gordon

  • Unable to Create Service Request Template in CRM

    Hello,
    I need to create a service request template in crm web ui,
    Following are the steps followed.
    I have identified the transaction type as SRQT screen shot attached below
    However when I click on on the work center link groups of the service pro role, I am not able to find the same for the service request template
    As per the post below it says that you need to go navigation bar profile and add the SM-SUPPORT work center and the work center link group as SM-SRQT-CR
    How to customize service request templates
    The error appears when I try to add the logical link id,
    Because of the above error I am not able to create service request template in sap crm, please advice which logical link ID, I need to use so that the service request template can be created in the system.
    Kind Regards
    Atul

    Hi Atul,
    1. Screen shot 1 is correct
    2. Screen shot 2 - You are at end of all work centers in your custom role which you might have copied from standard or Z role. If you look in standard role SERVICEPRO, navigation bar profile SRV-PRO, work center - SRV-ORD, you will find service request template
    In Cases work Center in standard SERVICEPRO role you can create service request template.
    Try copying this to your custom role in your required work center. It should work.
    Regards,
    Niraj

  • How to Get Service Type as deault value in India Localization

    Hi Gurus
    I have a problem with respect to Form personalization
    I have attached the Tax Category to a Item Class wherein we assign Items to the template in Excise Regime, so that, when Sales Order is created, Tax get automatically calculated in India Localization Tax Form. But, I need to default Service Type value when specific Tax Category is Entered. Can any body suggest me...........
    Regards,
    Balaji

    Have you looked into using Defaulting rules ?
    OM > Setup > Rules > Defaulting rules
    Sandeep Gandhi

  • How to change power state in a Service Profile Template

    I'd like to change the setting "Power State" in a Service Profile Template. While I can change nearly every other aspect of the template, I can't find this in the UCS Manager GUI. Is this an immutable decision while creating the template? Can I change it via the CLI?

    Hi Joernclausen,
    What is the firmware version of your UCS?
    From the CLI try the following and let me know if it works.
    Go into the FI CLI and perform the steps below, ensure to enter your own template_name and select appropriate type of template followed by setting the power up or down
    sj-ucs-r13-mon-A# scope org
    sj-ucs-r13-mon-A /org # enter service-profile template_name initial-template
    sj-ucs-r13-mon-A /org/service-profile # power up
    sj-ucs-r13-mon-A /org/service-profile* # commit-buffer
    sj-ucs-r13-mon-A /org/service-profile # power down
    sj-ucs-r13-mon-A /org/service-profile* # commit-buffer
    You may also be able to change the power state from the individual service profiles
    Go to the service profile and use "Change Initial Power State" button for modifying the desired-power value.
    see attached screenshot

  • External definition and used them as Data Type Templates

    hi all
    how to Develop external definition and used them as Data Type Templates .
    Thank u
    Swari

    HI
    External Definitions: If a definition of the message structure exists in wsdl, xsd, dtd formats, we can use it in the integration repository by importing it as an external definition.
    External Definations:
    An external definition enables you to import a local WSDL, XSD, or DTD file to the Integration Repository and specify which parts of the schema to extract as the description for a message. You can use these extracted message schema as:
    Output or input messages in message interfaces
    Source or target structures for message mappings
    There is a series of standard schema for describing the message structure at runtime. WSDL (Web Service Description Language), XSD (XML Schema Definition Language), or DTDs (Document Type Definitions) are often used to describe message schema. If a description of the message structure already exists in one of the above formats, you can use it in the Integration Repository by importing it as an external definition rather than re-entering it manually using the data type editor.
    Have a look at
    http://help.sap.com/saphelp_nw04/helpdata/en/43/ce49ef1019087ae10000000a1553f6/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/ba/d4c23b95c8466ce10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/26/9e97b0f525d743882936c2d6f375c7/content.htm
    cheers

  • ACS 5.3 - 11033 Selected Service type is not Network Access

    I have some older devices on the network that only support RADIUS (not TACACS) for authentication and would like to have them use SecureACS 5.3 
    I understand that by default, ACS only supports TACACS for device administration.  So I'll get this error when trying RADIUS:
    11033 Selected Service type is not Network Access
    Description:
    RADIUS requests can only be processed by Access Services that are of type Network Access
    Resolution Text:
    Verify that the Service Selection Policy rules are correct
    However, even after adjusting the Service Selection rules and seeing hits, I still see the same message in the logs, as if it has no affect.  Any Ideas?

    If you use the protocol as radius you can not use a device admin service. You can only use network access. That will allow you for authentication to the devices.
    Regards,
    Amjad
    Rating useful replies is more useful than saying "Thank you"

  • Generating Accruals from Service type Goods Receipt PO's

    I have identified that Service type Goods Receipt PO's do not write to the G/L, but a.) I don't understand why they don't and b.) how does one create system generated accruals if not by Goods Receipt PO?  I am sure this question has been asked before, but I couldn't find the thread.
    Thanks in advance,
    Donald

    Invoices create an actual expense.  Accrual expenses are normally captured as a result of work performed or items received but not invoiced.  Once again, I understand what SAP Business One does in this scenario.  I am being asked why and for that I don't have an answer.  It doesn't seem to be in conflict with GAAP, so I am not sure why they don't allow G/L Account determination for Service Documents to Accrual accounts.  It is a similar problem on the AR side, SAP B1 doesn't support money received, but not recognized to the liabilites bucket without manual intervention.
    Thanks again,
    Donald

  • Goods Receipt PO (Service Type) for generate accruals

    Hi,
    Just wonder that Service type of Goods Receipt PO possible write to the G/L or not? for item type of Goods Receipt PO, it can generated accruals.
    I want to generate accruals by Goods Receipt PO., else how am i going to generate accruals?
    Thanks.
    Regards,
    Danny

    Subject is discussed in this link with no answer
    Generating Accruals from Service type Goods Receipt PO's

  • New Document Type Template PHP Class

    How do I create a new document type template for a PHP class
    in Dreamweaver CS3?
    I want to be able to go File -> New -> Blank Page ->
    PHP Class.
    I want the template to then look like:
    [code]
    <?php
    class Classname {
    //Class Member Variables
    //Constructor
    public function Classname() {
    //Methods
    ?>
    [/code]
    Thanks.

    Bumb, anybody?

  • OSB Service Type

    HI,
       I want to know the best practices (scenarios) of using "Service Types" while creating proxy/business services in OSB. Could you plese help me in the same .
    Thanks and Regards
    Guru...

    it depends on what service interfaces you want to expose on your osb layer.
    when using wsdl/xsd you define a structured interface, client who invokes this service can generate artifcats against it and 'know' what payload is needed for a valid invocation.
    when you use anysoap/anyxml you allow the client to any any payload, even payloads which aren't valid at all.
    use for example anyxml if you just want to transfer xml payloads, if you also need for example some soap header settings, use any soap

  • Quantity for service type invoice

    hello
    i am trying to create a service type purchase order. i have created row level udfs for unit price and quantity. price should be multiplied by unit price and the total should be displayed as the total for the invoice. how can i do this?
    secondly, when i create an invoice based on this purchase order, if i get a short delivery, the customer wants the system to automatically be able to compute the total amount when we enter the quantity. is this possible?
    any help will be greatly appreciated. thanks!

    Have you tried formatted searches. I am sure it will do the trick. 
    For the first one: Use a formatted search in the Row Total field that selects your UDF's qty*price.
    second one: I am not too sure about all the requirements, but I think something similar will work.
    Hope it helps!
    Regards

  • Activity Templates inside Service Request Templates

    I have run into a problem and I was hoping there is an easy solution.
    I have built Activity Templates for Access Requests, one template per application.
    Then I have Service Requests for per Job Code, which include up to 20 of those Activity Templates.
    I did it this way specifically so if an Application Access process changed, I could just edit the Activity Template for that Application, and all the Service Requests that use that template would update as well.... or so you would think.
    I just had to change some, and my service request is still showing the old templates, not the esits I did. I waited over an hour. Is this a workflow problem, or a functionality problem? If the Service Request Template saves when created instead of pullign
    the activity templates each time its opened, it defeats my purpose of trying to do this modularly. This also makes absolutely no sense to me either, if that is in effect how it works.
    What that will mean is I will have to edit every service request that uses a specific activity, instead of just that activity template.

    Activity templates do not cascade. When you add an activity template to a Service Request, SCSM creates a copy of the activity template _inside_ the SR template. That's where they diverge.
    Any further changes to the original activity template will not be replicated to any SRs that contain that activity.
    I'm sorry to say that's the way SCSM's template management was implemented.

  • Live Type Template not displaying correctly in FCE

    I'm trying to use the "Ink Title" template from the Live Type Template Browser: File > Open Template > Template Browser.
    But when I import the .ipr file into FCE 3.5.1 it comes across with a transparent background and is not showing the artwork. I set up each of the other "Ink" templates and imported them into FCE and they run fine -- with the Ink design.
    Can you tell me what I might be doing that is keeping the "Ink Title" template from displaying correctly?
    Thanks.
    core duo   Mac OS X (10.4.6)  

    You have to go to the sequence settings in Live Type and check Render Background. Press Apple + 0 and you will see the Render Background Check box. I bet it is not checked. Hope this works. Tell me if it doesn't.

Maybe you are looking for