Service users

I have gone through different threads that are available on this forum. In summary
>>The service users are used for internal communication within XI components which are trigerred by Dialog users. The service user username, password, language are given in Exchange profile.
Again there we have 2 different service users ( service users during design&configuration and service users in during runtime). As a developer whether at any time we are going to use these ?? If so what are the occations in which we will use service users (design & runtime users ) ??
Thanks
Kumar

hi
Ref this
http://help.sap.com/saphelp_nw04/helpdata/en/9f/d12940cbf2195de10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f9/e3162ec55f4df6922d161f3785012a/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/3d/3272396ace5534e10000000a11405a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d4/d12940cbf2195de10000000a1550b0/frameset.htm
Dialogue or Service User
/people/alexander.bundschuh/blog/2007/01/16/principal-propagation-in-sap-xi
http://help.sap.com/saphelp_nw04/helpdata/en/52/671126439b11d1896f0000e8322d00/frameset.htm
Thanks

Similar Messages

KM Scheduler Task - Service user

Dear all,
I created a scheduled task in the NWDS and deployed the par and configured the time table for it. The task is running every minute, so it's all working. Now i'm wondering, is it possible to set the user that executes the task somewhere? like in a service user or so.
I played around a bit in the portalapp.xml and it now looks like:
<?xml version="1.0" encoding="utf-8"?>
<application>
<application-config>
    <property name="SharingReference" value="usermanagement, knowledgemanagement, landscape, htmlb, exportalJCOclient, exportal,SAPJ2EE::sap.com/ear~test"/>
    <property name="SecurityArea" value="Netweaver.portal"/>
    <property name="Vendor" value="sap.com"/>
</application-config>
<components/>
<services>
    <service name="RFServiceWrapper">
      <service-config>
        <property name="className" value="com.sap.netweaver.rf.wrapper.RFServiceWrapper"/>
        <property name="startup" value="true"/>
        <property name="SafetyLevel" value="low_safety"/>
      </service-config>
    </service>
</services>
</application>
In the run(..) method, i call an ejb, and in the ejb i print the username that's executing it. Sometimes it says it's executed by Guest (most of the times), and sometimes it says it's executed by Administrator...
What user is used for running the scheduled task? can it be a fixed user, as in "serviceUserX" for example? How do i configure that?
Kind regards.
J.
Message was edited by:
        Joren Crauwels
Message was edited by:
        Joren Crauwels

Hi
Did you find a solution fo this problem?
Florin

BOE XI R2 - Configuring RAS with Service user, RAS Fails to start...

Colleagues:
Where would kbase article c2018785 be found?
I am configuring my BOE XI R2 to use End-to-End SSO via IIS using this document from Business Objects:
Link: [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403cdf46-c63e-2b10-2997-978cb8ba59f0]
In this document, you create a service user under which certain applications run, including the Report Application Server.
There is a specific note on page 6 in the doc which states:
The RAS server may fail to start under this new service account. If you experience this issue, follow the steps outlined in the following kbase:
Link: [http://support.businessobjects.com/library/kbase/articles/c2018785.asp]
Unfortunately, the link is out of date, and I have not found the article using the existing search tools.
I did use the -trace argument to the command line to start up the RAS service, and the output is follows:
Timestamp     ProcessID     ThreadID     Message
[Thu May 07 13:21:39 2009]     4448     4228     (.ashwin32service.cpp:165): trace message: RAS starting
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2039): CDTSApp::InitInstance(): In CDTSParameters::RUN
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2055): CDTSApp::InitInstance(): Starting server. Process Id=4448
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2062): CDTSApp::InitInstance(): setServerParameters() done
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2130): CDTSApp::InitInstance(): initLicenseLimit() returns 1
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3895): CDTSApp::loadServerOptions(): about to SaveToRegistryAsDefault
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3897): CDTSApp::loadServerOptions(): done SaveToRegistryAsDefault hr=-2147024891
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3916): CDTSApp::loadServerOptions(): error Access is denied.
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2134): CDTSApp::InitInstance(): loadServerOptions() returns 0
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2194): CDTSApp::InitInstance(): getDataEngineName() returns C:TrouxBusiness Objectscommon3.5 incrpe32.dll
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2197): CDTSApp::InitInstance(): openEngine() returns 0
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2292): CDTSApp::InitInstance(): preloadMSXML() done
[Thu May 07 13:21:39 2009]     4448     4228     trace message: EnCOMSessionMgr::EnCOMSessionMgr begins...
[Thu May 07 13:21:39 2009]     4448     4228     trace message: EnCOMSessionMgr::EnCOMSessionMgr trying to get Singleton SessionManager.
[Thu May 07 13:21:39 2009]     4448     4228     trace message: CInfoSessionManager::Initialize start
[Thu May 07 13:21:39 2009]     4448     4228     trace message: CInfoSessionManager::Initialize, start the cluster refresh thread
[Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:2445): CDTSApp::InitInstance(): caught UNKNOWN EXCEPTION!!!
[Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:2461): CDTSApp::InitInstance() returns 0
[Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:1039): CAgentMapMT::ShutDown - outstanding agents:
[Thu May 07 13:21:40 2009]     4448     4228     (.ashwin32service.cpp:329): trace message: RAS Exiting: return code = 0
In the Windows event viewer, this error is echoed:
Failed to load Report Application Server settings from the system registry.
Detailed Message: Access is denied.
It seems my service account needs a certain permission to be able to load and read the registry for this application, and I'm sure this permission is discussed in the missing kbase article.
Could you please let me know what permission is required for this user on the OS? This is Win2003 x64 SP2.
Thanks, and have a good day

Hi,
if this a permissions problem then just start +regedit*, go to
My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects
select it, press the right mouse button and choose Permissions. Press the advanced button and assign your service account with full control at this point of the registry. Do not forget to select the +Replace Permissions Entries on all child objects ... + option.
You can also take a look at Notes 1199630 and 1201489 (this one is for CR 10 but it may be worth it to follow the instructions there) ( [https://service.sap.com/notes])
Regards,
Stratos

To install Remote Desktop Services User CAL on Windows Server 2008 R2 Enterprise Edition with SP1

Dear Sir,
Presently we have installed Windows Server 2008 R2 Enterprise Edition with SP 1. And now i would like to install Remote Desktop Services User CAL on this server. I have 25 digit product key of Windows Server
2008 R2 Remote Desktop Services User CAL (20). Downloaded this product key from our MSDN Subscriptions.
Kindly suggest me how to install (CAL server with product key that i have) and configure remote desktop services on my above existing server also how to point other server with my CAL server.
Thanks

Hi,
1. Install Remote Desktop Session Host and Remote Desktop Licensing Role Services using Server Manager.
2. Open RD Licensing Manager (licmgr.exe), Activate your server, then install your license
3. In RD Session Host Configuration (tsconfig.msc), set the Licensing mode to Per User and Specify your RD Licensing server name (itself). If you want you may configure these two settings via group policy setting instead. The path of the
group policy settings is Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
4. You may point other RDSH servers to your RD Licensing server using RD Session Host Configuration or via group policy as mentioned above.
5. Optionally you may consider installing other Remote Desktop Role Services such as RD Gateway, RD Web Access, RD Connection Broker, etc.
-TP

User Profile Service - User Profile Incremental Synchronization Timer job stuck at 33% Status: Pausing

User Profile Service - User Profile Incremental Synchronization Progress: 33% Status: Pausing
It has been almost 15 days.
Both User Profile Service and User Profile Synchronization Service are in Started state and FIM service also starting
I tried clearing sharePoint config cache.
I also restarted the sharepoint timer service.
I tried almost everything that is on Internet but nothing helped me.
Is there any other way to solve the issue as I was struck on production server (ASAP)
In synchronization serivce manager status of MOSS_DeltaImport is Inprogress from past 2 days
Best Regards.

Hi,
Please follow the steps in the link below to clear the configuration cache.
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/en-US/beaa852c-6f40-428a-b97c-20722864e045/user-profile-service-user-profile-incremental-synchronization-timer-job-stuck-at-88-status?forum=sharepointadminprevious
Or try to clear the file system cache on all servers in the server farm on which the Windows SharePoint Services Timer service is running. Microsoft has provided a step by step procedure on clearing file system cache from the SharePoint front-end servers
in this kb article.
You can also see the ULS logs and check error messages.
http://sharepointlogviewer.codeplex.com/
Best Regards
Dennis Guo
TechNet Community Support

Creating a Service User

I'm trying to create a Service User in the portal. I've come across this link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cfdc9e90-0201-0010-6780-cc30206dd319
On page 7, it says that "Service Users reside only in the database. This can be achieved by settings in the configuration file."
It then goes on to say that several service users such as cmadmin_service are added by KM. My question is, how do I add my own service users? My portal is not using LDAP as a user repository, just the portal DB.
Thanks,
Matt

First, thanks for the reponse -
Yes - I believe the namespace is $serviceUser$. Since our portal is not integrated with a user repository like AD, how would I create a service user with appropriate namespace? Creating users via the User Administration role, I cannot assign the new users to the $serviceUser$ namespace. Do I have to write some SQL to insert into the user database table?
Thanks again.

Error - The registration of the service "User Profile Service" has failed. The user profile can not be loaded

I am running an environment with an Active Directory and Terminal Servers.
I have searched high and low for resolutions to this error but I cannot find anything related to my situation, let me explain further.
The fixes I found are related to local users only.
When I create a new user in the Active Directory I provide the paths to the profile folder in the "Remote Desktop Profile" and "Profile tab" lets say for example \\ad001\home\%username% and \\ad001\profil\%username% .
I give rights to the user to read/write the "home" folder which is mapped for folder redirection. An I know that when the user first logs on it should create a "v2.%username%" folder upon successful logon. This is when I am
presented with the error message below:
"The registration of the service "User Profile Service" has failed.
The user profile can not be loaded"
Does anyone have any experience with this or know a suitable fix. Again this is for the "Roaming" profile creation no local.
Many thanks in advance.

Hi,
Thank you for posting in Windows Server Forum.
Did you receive for any one user or for all users?
Have you tried to solve the issue by fixing the user account profile?
For that you can adjust the registry setting “ProfileImagePath” with
particular SID of that user under below mention path.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Also if this can’t resolve the issue you can try to delete the SID of that user or renaming the old and and then check the result again by creating new profile for that users.
More information.
You receive a "The User Profile Service failed the logon” error message
http://support.microsoft.com/kb/947215
Hope it helps!
Thanks.
Dharmesh Solanki

ABAP Service Users not working - important

Hi,
I installed finally BPC 75 NW, and I cannto get ito the application for the 1° time because I have several issues.... I get the error "The user ID, password cannot be authenticated. Make sure you entered valid credentials".
On Server Mgr. i get 2 errors " Sap server connection : database connection" and "ms message queue: queue name: .private$BPCstatusmessagequeue".
I have done eveything in order to solve this... but... after a lot of research I found a note where it is suggested to uninstall, however I still want to change some parameters as described in the installation guide, I hope you can please help me to clear this:
Manual, page 43, installation for NW.
- ABAP service users can be locked as a result of the install.
- Check and unlock users, use SU01, press Ctrl + F5 (done, not a problem)
- Check that COM + Components exist (done)
- Check interfaces (this means changes in Pooling & Recycling?)
- Check that librfc32.dll is set up appropiately (I had the problem during install where i needed to reassign this dll, now is not an issue unless there is something else to check that i am not aware of)
- IIS Port (80 by default right?)
- ServerConfiguration.config for the correct username and system info (cant find this file)
- Registry Entries on 32 and 64 bits (how can I do this)
- Check C:windowssytem32driversetchosts file to ensure that a fully qualified domain and IP resolution exists (what exactly do i need to check)
On server mgr also I have for COM+ components " domain system administrator with which i installed & password" is this right?
Thanx in advance, it is really important.
Velázquez

Hi,
Thanx for the feedback !! really appreciate it. Here is the response:
The COM components are ok, as well as the MSMQ and every other component you mentioned (also reinstalled it). I reactivated all "dictionary" to the 3 users created in ABAP, changed role to communication, and give SAP_ALL permission.
In the machine, changed the Default web site to port 81 (to let BPC website take port 80)
Reinstalled NET 2.0, set all components for BPC website to Net 2.0
Created the 3 abap users in domain and gave in both systems the same password.
Entered in the machine as the administrator user (also administrator in Netweaver) and started the installation without trouble.
After that, tried to run the server diagnostic but this user was lacking permits, so I added the 3 users (abap) in the local machine as administrators, in a new group called BPC (only giving the administrator role). Entered now in the machine as BPC_SYSADMIN and ran the Server Diagnostic without trouble.
After doing this, I now am facing an issue trying to add users to the 1° appset... choosing the domain users... however someone mentioned that this is related to the NET tier, is it better to reinstall this tier completely or at least try with NET 1.1, but im just about to find out.
Thanx again for the response.
Velázquez

IOP 11.1.2.0 integration with Shared Services (User Provisioning)

In the IOP 11.1.2.0 install guide, the Admin and Admin provisioning roles are provisioned through Shared Services.
"Provision Integrated Operational Planning Administrator and Integrated Operational Planning
Provisioning Manager roles for the Integrated Operational Planning instance to the Admin user through
Oracle's Hyperion® Shared Services Console
a. Connect to the Oracle's Hyperion® Shared Services Console; for example, http://
hss_server:hssserver_port/interop.
b. Log in as the administrator.
c. Expand User Directories and Native Directory.
d. Select Users and click Search.
e. Right-click the Admin user and select Provision.
f. Expand Default Application Group.
g. Expand the Integrated Operational Planning instance created.
h. Highlight IOP Administrator and Provisioning Manager.
i. Click the right arrow in the middle of the two windows to select the roles.
j. Click Save, and then click OK."
The users and groups are defined in Shared Services, per the IOP 11.1.2.0 admin guide (p. 144).
Is there an IOP user provisioning example in the shared services user's guide, and which version of the guide would I find that in?
Access priveledges are controlled from the Admin workbench for IOP users, per p.145 of the IOP 11.1.2.00 user's guide.
Thank you.

IOP Roles are listed in the 11.1.2 Shared Services User and Role Security Guide, on page 158:
Integrated Operational Planning Roles
Table 39 Integrated Operational Planning Roles
Roles Tasks per Role
Provisioning Manager Provisions users and groups with Disclosure Management roles
IOP Administrator Administers Oracle Integrated Operational Planning, Fusion Edition. IOP Administrators can modify models, access
ACL pages, and perform all Integrated Operational Planning tasks
IOP User P erforms Oracle Integrated Operational Planning, Fusion Edition actions as a normal user

Copy distribution list to all content services user folders

We have an Outlook distribution list PST file that current resides in a Windows file server. This gets pushed out the the personal folder of each user overnight.
Going forward, we need to push this PST file to all the Content Services user personal folders (Users-A, Users-B ... Users-Z).
I created a single superuser that has all administrative rights to all the users personal folders. And I can upload a file through the webdav http interface.
with the "Upload" button while I'm "Switched to Administrative Mode" only.
And I can't see the users personal folders while using the Oracle Drive nor
thru a Network drive.
Is there a way of pushing this to all the users' personal folders???

Hi Juan,
I tried that but it is not showing the shared distribution list for moving.
I found 1 sap BC office document which stats that moving the distribution list form Private to public is not possible due to security reason.
So, no options for me and to create manual shared distribution list.
Thanks
Anil

PI 7.0 service users are locked

Hi guys,
We have PI7.0 installed and configured properly.
We created a custom product and software component version in SLD and when we are trying to import it in IR we get "Unable to read software component versions from System Landscape Directory". Just to let you know PI is on one host and SLD on another.
It is obvious that something is wrong with users in the communication between IB and SLD.
We have tried everything:
1) notes 764176, 768148, 720717, 741214, found on relevant posts.
2) Exchange profile checks, we added extra roles to PIREPUSER, we replaced PIREPUSER in Exchange Profile with PISUPER, creating all PI service users with user roles in ABAP part of SLD etc... When I changed something in ABAP part, I performed "assign roles to user groups" in VA of Java part.
However, I noticed that in SLD's UME in Java some of the PI service users are locked and I am unable to unlck them, since when I try to do so with user j2ee_admin, I get "There was an error. Please contact administrator"
Any ideas??
Evaggelos

Thanks to both guys. I will award points.
The problem was caused due to some PI users that were locked on the J2EE part of XI, and therefore they could not connect to the SLD. I unlocked them through VA 's, Security Provider service.
Evaggelos

No service user name found for Integration Server

Hi All,
Our XI is in production..once in a while (once in every 3 weeks) messages get fail saying: No service user name found for Integration Server. When we re-start J2EE engine, messages get processed fine. Does anyone know the reason for the above error?
<SAP:AdditionalText>3:No service user name found for Integration Server is.00.******<S/AP:AdditionalText>
<SAP:Stack>Error when reading the access data(URL, user, password)
Thanks
Indrasena

Hi,
did you configure your adapters like IDoc, RFC based on the SAP service user created in the SAP system ? i,e RFC destination etc..
did you check pipeline url is correct in the SLD>Business System><Integration Server> and check the url. It should have http port.
Also check this thread-
sRFC-adapter and file adapter with error: no adapter found
Regards,
moorthy

Regarding Service User creation in PI 7.11

Dear friends,
WE have succesfully installed PI 7.1 ehp1 on Dev server. We are in bit dellema that service users like PI service users, PIISUSER, PIDIRUSER, PIREPUSER, PIAFUSER, PILDUSER, PIRWBUSER, PIPPUSER, PI_JCO_RFC are not created after installing PI.
My question is do we need to create these users manually on PI 7.11 or any configuration is required to activate these users.
Kindly help
Niraj Mishra

Create them in tcode SU01.
Regards,
Abhishek.

Provide self-service user with information about his/her VM? IP address at a minimum?

Just setup a private cloud using VMM 2012 Sp1 as well as app controller 2012 SP1 fresh installs on Server 2012. Since it's a lab, app con is installed on VMM server.
I have the cloud and templates and service templates and self service working as well as an IP pool handing out IPs. I was wondering if there was a relatively simple way to provide at least the IP address of the self-service provisioned VM to the self-service
user who requested it, preferably through the app con site somehow.
There's 2 reasons behind this:
1. I'd like to avoid having them console in, get the IP, and then log out and RDP in. I'd prefer they just RDP directly to the IP the first time and go about their day.
2. Our DNS is not MS and does not allow auto registering, so connecting via RDP through the app controller site doesn't work because the FQDN is not reachable after VM is provisioned.
Any way to get that info easily to the user?

Hi C. Baum,
App Controller doesn't have the ability to provide the IP address of virtual machines.
My recommendation is to have the name of the virtual machine register in DNS -- its much easier for most people to deal with hostnames rather than IP addresses.
Kind Regards,
Richard
This posting is provided "AS IS" with no warranties, and confers no rights.

Could any one tell me that How can i create the service User ie j2ee SID

hi all,
In the implementation of SPNego Authentication schem in my portal system.
i want to create the service user ie .j2ee-<SID>.
<b>could any one tell me that How can i create the service User ie j2ee-<SID> in my visual administrator??</b>.
any help will be highly Appretiated .
thanks and regards.
vinit soni.

Vineet,
the user management tab opens in Read Only mode - thats why the button is coming as disabled. There is a button for switching into Edit mode - it looks like a pen / pencil on the top bar. Click on that - your "Create User" button would be enabled.
Also regarding creation of Service User via code level you can see <a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=1057074">THIS</a> thread. And <a href="http://HERE">http://help.sap.com/saphelp_nw04/helpdata/en/f9/e3162ec55f4df6922d161f3785012a/frameset.htm</a>HERE[/url] is the SAP Help documentation on required permission settings.
Regards,
Shubhadip
Message was edited by:
Shubhadip Ghosh
Message was edited by:
Shubhadip Ghosh

Unable to create service user Installation

Hi am unable to create PIAPPLUSER service user.Am installing NW2004s on AIX.
Its using the BAPI_USER_CREATE1 to create the user, everything is successful but at last it gets a message RFC connection closed.Is this some thing to do with SLD? I created the user PIAPPLUSER manually, but then also its giving RFC connection closed...Please help me...Answers will be greatly rewarded...
INFO       2007-04-19 12:31:08 [iaxxrfcimp.cpp:478]
           CAbRfcImpl::checkSysInfoSAP
Version 700 of remote SAP System QPI accepted.
INFO       2007-04-19 12:31:08 [iaxxrfcimp.cpp:594]
           CAbRfcImpl::setFunction
Setting new application function BAPI_USER_CREATE1.
INFO       2007-04-19 12:31:08 [iaxxrfcimp.cpp:1017]
           CAbRfcImpl::callLibraryFunction
Generating interface for remote function.
INFO       2007-04-19 12:31:09 [iaxxrfcimp.cpp:1065]
           CAbRfcImpl::performFunctionCall
Function call was successful.
INFO       2007-04-19 12:31:09 [iaxxrfcimp.cpp:924]
           CAbRfcImpl::getRfcInterfaceSAP
Function interface generated successfully.
INFO       2007-04-19 12:31:10 [iaxxrfcimp.cpp:926]
           CAbRfcImpl::getRfcInterfaceSAP
Technical properties of function set successfully.
INFO       2007-04-19 12:31:10 [iaxxrfcfls.cpp:107]
           CRfcFuncRep::insFuncIf
Information for application function BAPI_USER_CREATE1 copied to local Repository.
INFO       2007-04-19 12:31:10 [iaxxrfcimp.cpp:622]
           CAbRfcImpl::setFunction
Function module BAPI_USER_CREATE1 set successfully.
INFO       2007-04-19 12:31:10 [iaxxrfcimp.cpp:1032]
           CAbRfcImpl::callFunction
Executing function call BAPI_USER_CREATE1.
INFO       2007-04-19 12:31:10 [iaxxrfcimp.cpp:1065]
           CAbRfcImpl::performFunctionCall
Function call was successful.
INFO       2007-04-19 12:31:10 [iaxxbjsco.cpp:561]
           CIaJSCo::disconnect_impl(001:DDIC:EN:tsqa1d03:40:::)
RFC connection closed.
ERROR      2007-04-19 12:31:11 [iaxxejsbas.cpp:178]
           EJS_ErrorReporter
FJS-00003 TypeError: this.getSystemInfo() has no properties (in script NW_Onehost|ind|ind|ind|ind, line 12941: ???)
ERROR      2007-04-19 12:31:11 [iaxxgenimp.cpp:736]
           showDialog()
FCO-00011 The step CreateUser with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_PI|ind|ind|ind|ind|1|0|GenericNewCreateAbapUser|ind|ind|ind|ind|1|3|CreateUser was executed with status ERROR .

Hi
I did that....I created the user manually and assigned the role...Then also its not crossing the step "Creating PIAPPL USER step".If it passes thru this step...am all set to go with my installation...Any help??

Service users

Similar Messages

Maybe you are looking for