Serviceability Reports Archive more than 7 days?

I can't seem to find where I can set the report duration from the last 7 days to 30 days? I see in 5.0 you can set this, but in 4.1.3, I cant seem to find this.
Thanks!

ahh nevermind.. i found it...
Service
Service Parameters
Servicability reporter

Similar Messages

PS2013 / SQL 2012 - A SQL Reporting Services Report with more than one filter connection looses connection in a site template

Hi,
I created in a sub site not linked to a project to become a site template. I inserted two SQL Reporting Services reports web part that require the same two dates for an interval and the name of the project in a page of the site and connected
to three filters, two for date and one for text and I got the page below (only one of the reports shown).
Look that all parameters needed by the report are linked to the filters above the report.
Then I save the site as template with all contentes and assign it to the EPTs and create a new project or replace the site of existing project site. What I got is:
Look that the filter connection of the dates are lost (in both reports) and the order of the filters changed.
I deleted and retried to connect the filters in diferent order and language, but I did not get any success.
The BI Central Data Connectivity resource is activated in the template site and in the site collection.
Is there any solution for this?
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

Hi,
Correction: this happens only with "Date Filter" web part!
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

Reporting from more than one infocube and also from multiple ODS

Hi all,
Someone please help me in these issues.
How can we do reporting from more than one cube ( if data in all the cubes are required, but only a few fields from each cube). And how to do the same with more than one ODS.
Thanks in advance,
Sekhar

Hi Sekahr
Can u jus create a multiprovider.
Before creating the multiprovider..Just check the Common charcterstics avilable in
all the ods based on that give the mapping ..
and then once u have completd the creation of multiprovider execute the same in
the tcode <b>Listcube</b> and then create the querys as per the user thats it...
Regards
R M K
Assining points is the only way of saying thanx in SDN ***

Wcf Data Service fails when more than 8properties in the 'select=' portion

Hi:
I am using WCF Data Service and Oracle
EF Provider is ODAC11.2 Release 4
Wcf Data Service fails when more than 8 properties are specified in the 'select=' portion of the URI
here is my code
var q = from c in this.ctx.SALESORDER_ITEM
select new
c.SORDERDETAILID,
c.IID,c.DMFLAG,c.OWNERID,c.SKUID,c.SKU_ID,c.TRADENO,c.SOURCEID,c.SORDERID
excetion:
InvalidOperationException: An error occurred for this query during batch execution. See the inner exception for details
The inner exception is null, but the DataServiceClientException states: Value cannot be null Parameter name: value
the exception is thrown in base.OnStartProcessingRequest(args) method (overridden).
Here is the call stack as well:
at System.Data.Services.WebUtil.CheckArgumentNull[T](T value, String parameterName)
at System.Data.Services.Internal.ProjectedWrapper.set_PropertyNameList(String value)
at lambda_method(Closure , Shaper )
at System.Data.Common.Internal.Materialization.Coordinator`1.ReadNextElement(Shaper shaper)
at System.Data.Common.Internal.Materialization.Shaper`1.SimpleEnumerator.MoveNext()
at System.Data.Services.Internal.ProjectedWrapper.EnumeratorWrapper.MoveNext()
at System.Data.Services.DataService`1.SerializeResponseBody(RequestDescription description, IDataService dataService)
at System.Data.Services.DataService`1.HandleNonBatchRequest(RequestDescription description)
at System.Data.Services.DataService`1.HandleRequest()
Is there a max number of properties in $select statement
I think may be it is oracle provider's problem ,but i don't konw how to debug it Can anyone help me
Any help is greatly appreciated

I believe the null/empty string issue is unrelated to the 8 column issue, at least for ODP.NET. For example, let's take the original query in the OBE:
http://.../yoursvcfile.svc/EMPLOYEES?$select=EMPLOYEE_ID,FIRST_NAME,LAST_NAME,SALARY,DEPARTMENT_ID,DEPARTMENT,EMAIL,PHONE_NUMBER,MANAGER_ID
Let's make all the columns selected not nullable. You can do this with the Oracle Dev Tools. Specifically, PHONE_NUMBER and FIRST_NAME are the only nullable fields. I make them non-nullable and re-run the query and the same error occurs. Thus, these values should never be made null. Moreover, in all 107 rows, none of these row values consist of empty strings anyway.
Looking into the problem further, WCF DS is calling methods in the System.Data.Services.Internal namespace.
http://msdn.microsoft.com/en-us/library/system.data.services.internal.aspx
Specifically, we see your issue when the ProjectedWrapperMany method is called. You will notice that there is ProjectedWrapper0, ProjectedWrapper1...ProjectedWrapper8 methods also present in the same namespace. As soon as the number of columns exceeds 8, ProjectedWrapperMany is called and we see the error. We're going to ask MS to help analyze the issue since this is an .NET-internal method being called.

Report with more than 500 rows

I have a report with more than 500 rows and i donot know the total number of records returned from sql query before hand. Is there any way to dynamically set the MAX ROW COUNT in the report - layout and pagination.
Thanks a lot
Sudha

Hi All,
The main problem for the scenario is that....Say you first create a SQL query based report with setting the row per page 15 .Now after the region is displayed if u go through the report attributes of the page and change the no. of row per page and apply changes the same will not going to reflect in the report display page.
For ur case just select the no. of page u want to show while creating SQL Query based report region say 1000 and after creating the region go to the report attributes -> Layout and Pagination -> Max Row Count : 9000 (say).
I have solved the problem after creating 700 rows and the all rows displayed in the page fine........If u have further issue plz revert back to me.
Thats solve ur problem i think.....
Thanks n Regards,
ROSY

Report with more than 30 columns

XML Pub Gurus,
I have a requirement where I need to create a table layout with proper spacing for more than 30 columns and I asked this question in Open World XML Pub team and they responded to my question as "The page size in word has to be increased to allow to add those many columns". I was satisfied with the answer without knowing that Word will not allow more than 22" long in landscape. So, I am puzzled with the answer in Open World.
So, could somebody please give me guide lines to create this type of report for more than 30 Columns. This is very common requirement for us to report some of the stuff from the db.
Thanks in advance
Ram G

What do you want your final destination format to be? I'm thinking you'll probably want to go out to HTML or Excel. I would think that would be the only place where you could read and use a report with more than 30 columns.
Here's an idea if you want to go to excel and if you are using the 10.1.3.2 Enterprise (standalone) version.
1. Create your query with as many columns as you want.
2. Don't create a layout at all
3. Launch Excel Analyzer.
4. From within Excel, build your report based off the downloaded data (for example add a pivot table).
5. Upload your excel Analyzer template back to the server
This template can now be scheduled and delivered like normal templates or updated with current data directly from within Excel.

Service interface with more than one operation

Hi all,
is it possible to have a service interface with more than one operation?
I have found this blog:
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID0209118050DB10459657028039341762End?blog=/pub/wlg/15123
But this sentence:
ABAP proxy (inbound/ outbound) cannot be developed out of a Service Interface having Operations with different type of messages included. If an ABAP proxy is to be developed then all the messages included should be of one type i.e. either the included messages should be Message Type, External Message, IDOC or RFC Message. This behavior can be observed when a Service Interface is created and then subjected for a check
regards

Hi,
now the interface is running but I get another error in .NET.
"The header 'Diagnostic' from the namespace 'http://sap.com/xi/XI/Message/30' was not understood by the recipient of this message, causing the message to not be processed. This error typically indicates that the sender of this message has enabled a communication protocol that the receiver cannot process. Please ensure that the configuration of the client's binding is consistent with the service's binding. "
Any ideas?
regards

Duplicate entries / Employee is appearing twice in report (OR more than onc

Duplicate entries / Employee is appearing twice in report (OR more than once)
When I hire an employee, I assign the position, and based on the positions other values get defaulted /assigned to that employee.
I have one case where employee has been assigned to one position, but with different position descriptions, and in report it is showing duplicate entries for the same personnel number, now client need for one personnel number only one row to display in report
Also I tries to run , Birthday list standard report , it is also showing 2 entries (Or sometime more than 2)for the same personnel number , May I know why this is happening?
And how to fix this bug
Thanks and Regards
Jaydeep Jadhav

Hi,
Can you check where the code is written to get employees from position, there may be two cases where multiple records exists for single person.
1) When getting data for pernr assigning to a position they may missed out date condition. If so we need to bring only active positions assigned to that employee.
2) There may be multiple positions assigned to a single person. In this case you need to ask the client what you need to do.
Delete adjacent duplicate is may not be correct solution as which position we need to delete is not sure. You check above two cases and go head.
Hope this information will help you.
Regards,
Narendra.Soma

Heading for Report appearing more than once

Hi All,
I am running a report, the report contain more than 1 lakhs records, how can I avoid the heading of the report to repeat, because as of now heading information is repeating for 50 records.
Please advice how to proceed on this issue.
Thanks,
Mohan R

write the code like
top-of-page.
keep page condition..
here write the heading
or
loop at itab.
at first .
here write the heading . This event will trigger only once ;i mean first record of the internal table
endat.
endloop.

Reports with more than 100 columns

I am using Apex 3.2. I am using a classic report with more than 100 columns. So to use the custom heading in the report, I exported the page,did modification in exported sql file and imported back.
But when I am passing the parameters from a input screen for the first time either it is showing the all data avilable in the database or with only header. If I do the refresh in input screen and try it then it is working as intended. I am updating at the below loaction of the page.Let me know if I have to update anything more in the sql file.
declare
s varchar2(32767) := null;
begin
s := null;
wwv_flow_api.create_report_columns (
p_id=> 200100535534034253 + wwv_flow_api.g_id_offset,
p_region_id=> 2003453533453 + wwv_flow_api.g_id_offset,
p_flow_id=> wwv_flow.g_flow_id,
p_query_column_id=> 157,
p_form_element_id=> null,
p_column_alias=> 'XYZ',
p_column_display_sequence=> 157,
p_column_heading=> 'XYZ 123',
p_column_alignment=>'LEFT',
p_disable_sort_column=>'Y',
p_sum_column=> 'N',
p_hidden_column=> 'N',
p_display_as=>'WITHOUT_MODIFICATION',
p_pk_col_source=> s,
p_column_comment=>'');
end;
/

Hi,
Its just a general thought and I realize you know your application and user community better I do, but do you think your users are going to be very happy when they are presented with a report with more than a hundred columns? Have you considered maybe presenting the data in some sort of rolled up form from which the user can then drill down to the data they are particularly interested in. Also, I'm sure your LAN administrator would be happy not to see 100+ column by x number row reports being regularly shipped across the network.
Also, 100+ column reports suggests tables with 100+ columns which are probably not designed in a very relationally compliant way. I find that good DB design usually results in applications that have to make less compromises, such as hacking export files in order to fool the API into making ridiculous, unsupported and unsupportable compromises.
Just a thought..................
Regards
Andre

The report displays more than 3000 pages with same content.

Respected Sir
I have a report with form letter layout.
The report contains only one page,but while running the paper layout ,the report displays more than 3000 pages with same content.
please anyone give a solution to this problem

I think there is no bad joining. b'se when the querry is executed in sql, it is working properly(means returns only one record) . This problem is not for a particular report. Any report using the "form layout", the same problem occurs.
Why this problem occurs. How can we solve it.
Bye

DIAdem report with more than 3 signals

Hi everybody!
How can I create a report with more than 3 signals as input. The DIAdem report accepts only 3 signals as Input.
In my opinion this is an very easy question but I could not solve it during a few hours!
Thanks in advance,
Manuel123

Thank you for your answer!
But I have still some problems.
According to your help I have connected eight of the signal-boxes to the connector. After that it is possible to connect up to eight signals to this sub-vi. Great!
But now I want show all these signals in the Diadem report, for this reason I created a new report-layout (see attachment) and wired the path of it to the "report layout file" - input. Unfortunately Diadem uses still a layout with just two signals and even if I open my own layout in Diadem there are only two data-lines listed in the "Data Portal: Internal Data" - panel.
Where is my failure?
Regards,
Manuel123
Message Edited by Manuel123 on 08-29-2007 10:00 AM
Message Edited by Manuel123 on 08-29-2007 10:01 AM
Attachments:
man.TDR.zip ‏11 KB

Need to Archive more than 5000 CP's in CRM.

Hi All,
I need to archive more than 5000 Contact Persons in CRM system
As many of these contact persons are having relationships in CRM which also have replication to R/3 system and contains the R/3 ID , Also these Contact Persons have the open CRM documents like Opportunities, Actitivies and Leads.
Can anyone guide me how to delete the relationship of the all Contact Persons in one shot or groups like 100 or 200 which are not having any CRM Documents present.
and please let me know the way to delete the role attributes of these contact persons which have been assigned to them in R/3 system as after deleting these roles only the relationship can be deleted.
Best regards,
Jatin Goel
Edited by: Jatin Goel on Jan 11, 2009 1:54 PM

I have find out the way myself.

I want to create a report with more than 64 column's.

I want to create a report with more than 64 column's. I have generated Query the XML.When I tried to create a template for the report.I have Inserted the colum's Wizard and finish it throughing error message. "you cannot create atable with more that 63 coloum's "

Hi ,
Can u Check the below thread
More than 63 columns in rtf template

Can i create report using more than one Business Area ?

Hi Gurus,
Can i create report using more than one Business Area?.Could anybody tell me that report will work?.
Vikram

You should have no problem creating a report using more than one Business Area, we share folders across BAs all the time for ease of management. As long as your joins exist its not a problem.
Matt Topper
TUSC, The Oracle Experts
[email protected]

Serviceability Reports Archive more than 7 days?

Similar Messages

Maybe you are looking for