Services for object in transaction EHSAMBTAET (Health Center Services)

Hi all.
In transaction PA30 there is a functionality called "services for object". I would like to have this functionality in the transaction EHSAMBTAET (Health Center Services) as well. At the moment when you choose it in the menu it just says: "No services available". Can anybody give me a hint on how to do this?
Many thanks
Liselotte

As far as I know, that "Services for object" is the Global Object Services (GOS), and requires a Business Object (BOR).
The Health Center Service doesnt currently provide such a BOR object.
see for more info: http://help.sap.com/saphelp_erp2005/helpdata/en/be/3fe63659241157e10000009b38f889/frameset.htm
Message was edited by: Frank Besler

Similar Messages

Add new function to Services for Object in transaction XD03

Hi expert,
Do you know how to add a new function to the Services for Object appeared at the beginning of the title bar on transaction XD03? I would like to add it to the Create list. Please help, thanks!
Chuong

Hi,
Check this Post, May help you
XD01 ENHANCEMENT
Regards,
Satish

How to add "services for object " in ECC 6.0

Hi Saurabh,
Thanks for your reply. I have checked the path given by you...System-> Service for object, but it is showing no service available as told by you. Cud you please tell me how to add this service because this is working fine in 4.6C but I dont know how to add these services in ECC 6.0. If any code for this which is written in 4.6C which I can refer... please tell me where to see the code for adding services (in 4.6C) b'coz its very urgent.

Hi Saurabh,
Thanks for your reply. I have checked the path given by you...System-> Service for object, but it is showing no service available as told by you. Cud you please tell me how to add this service because this is working fine in 4.6C but I dont know how to add these services in ECC 6.0. If any code for this which is written in 4.6C which I can refer... please tell me where to see the code for adding services (in 4.6C) b'coz its very urgent.

How to add services for object in ECC6.0

Hi everybody,
Can anybody tell me how to add "Services for Object" icon in ECC 6.0 because this icon is there in 4.6C but not coming in ECC 6.0.
Thanks in Advance

Hi Saurabh,
Thanks for your reply. I have checked the path given by you...System-> Service for object, but it is showing no service available as told by you. Cud you please tell me how to add this service because this is working fine in 4.6C but I dont know how to add these services in ECC 6.0. If any code for this which is written in 4.6C which I can refer... please tell me where to see the code for adding services (in 4.6C) b'coz its very urgent.

"Services for Object" in my own transaction

Hi everybody,
In MM02 you see the button for the toolbar "Services for Object" in the titlebar.
I want to add that same functionality in my own transaction. Does anybody know how to do this?
Thanks,
Tim van Steenbergen.

Sure, you can do that. Something like this. You will have to use a valid object and key. The example uses a maintenance notification.
report zrich_0001 .
parameters: p_check type c.
at selection-screen output.
call function 'SWU_OBJECT_PUBLISH'
    exporting
      objtype                 = 'BUS2038'
      objkey                  = '000010004288'
*     CREATOR                 = ' '
*     METHOD                  = ' '
*   TABLES
*     CONTAINER               =
   exceptions
     objtype_not_found       = 1
     others                  = 2.
start-of-selection.
Regards,
Rich Heilman

Service For Objects functionality (SDV transaction)

Hello experts,
Some users are getting an authorization error while trying to display an image from t-code FBL1N (services for objects). After identifying the reason of this issue with NSU53, the simple fix is to provide access to the user to transaction SDV. Actually, we are proposing to the security team to provide the access in a Generic role, so all user can get the access.
Their concern is that if for any reason, any of the users runs the t-code directly (SDV), and not through the Services for Objects funtionality, they might be able to access other documents that they should not be allowed. To be honest, I haven't seen this as an issue before in my 13 years working with SAP.
The question for you guys is: what is the best approach to grant access to users from different modules to Services for Objects functionality without violating security policies?
Thanks,
Alfredo

own

View workflow logs in services for object tab in transaction

HI All ,
Is there any settings that need to be done to see the workflow associated witha particular Tcode in Services for Objects tab.
Actually i want to see the custom workflow logs other than using tcode swi1 .
Regards ,
Sijin K P
Moderator message: not directly related to ABAP development, please see the Workflow forum.
Edited by: Thomas Zloch on Jan 17, 2012

Hi,
You have to implement GOS (Generic Object service).
Plenty of material available for it, you can reffer to meet your requirment.
Regards,
Manish

Services for Object in creation mode

Hi colleagues,
I am facing one problem and I would appreciate your help and ideas. I want to enable user to use a functionality of "Services for object" in creation mode (in my case transaction IW31). In change or display mode this functionality is enabled, so creating new BOR object and such things are not necessary.
I understand that services for object are disabled by default in creation mode, because it is not meaningful to assign some documents to object which does not yet exist. But in theoretical way, it should be possible to implement some "tricky" solution. Probably some temporary object could be created at the start of IW31 and attachments could be assigned to this object. And in some user exit executed during processing of save statement (after all checks and such things), attachments could be re-assigned to a real (persistent) object. For unsaved orders it would be necessary to delete temporary object and also attached documents.
Have someone implemented something similar? Or any helpful ideas?
Thank you all in advance.
Regards,
Adrian

Hi,
We have implemented exactly the same in a Ztransaction. Not sure to what extent this will help you. Check below code
CREATE OBJECT w_gosman
EXPORTING
* io_container = io_container
* is_bc_object = is_bc_object
 is_object = wa_object "BOR object
* it_service_selection =
* io_callback = io_callback
* ip_start_direct = space
 ip_no_instance = l_inst "Pass SPACE in your case
 ip_no_commit = l_commit "Pass SPACE in your case
 ip_mode = c_e
EXCEPTIONS
 object_invalid = 1
 callback_invalid = 2
 OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
"Here just we are creating a reference by publishing the object.
"During the transaction commit call below method.
wa_object-objkey = "Pass your object ID.
wa_object-objtyp = "Pass your business object
 CALL METHOD w_gosman->set_id_of_published_object
 EXPORTING
* is_bc_object = is_object
 is_object = wa_object
 EXCEPTIONS
 no_publication = 1
 OTHERS = 2
 COMMIT WORK.
Thanks,
Vinod.

Attachment list in Services for Object toolbar

Does anybody know if there is any user exit or BADI that I can use to filter certain file attachments in Attachment list of Services for Object toolbar.
For example, in transaction XK03 (Vendor display), Services for Object toolbar, you can see the Attachment list and it will display list of pc file attachments, however, we have a requirement to display only those that met certain criteria, is there any BADI or user exit for this?
Thanks in advance for your help.

you can use BADI
GOS_SRV_SELECT
for this.
Regards
Raja

Services for Object in VF02 & VF03

Hi All,
Attaching a document through "Attachment list" option by the "Services for Object" icon in VF02. however some options are grayed out. Please read through for the explanation of the problem.
1) Go to transaction VF02.
2) Input a billing document and press Enter.
3) Click on "Services for Object" button and a dropdown list opens which has the following options -:
a. Create
b. Attachment list
c. Private Note
d. Send
e. Relationships
f. Workflow
g. My Objects
h. Help for Object Services
However the option "b" and "e" (i.e. Attachment list and Relationships) are grayed out. Can anyone please help on how to activate the above mentioned options. Is it done by BASIS team. Please help.
PS: "Services for Object" icon is found exactly BELOW the "Enter" (green tick icon in the top left) button.
Thanks & Regards,
Himanshu Bhusan Sahoo.

Hello,
Please check the roles related to the below authorization object.
Authorization Object
S_WFAR_OBJ
Value
NV
Value
VBRK
Value
YP3INVOICE
Value
03
archiving Related role will give you access to View the billing document in PDF.
Thank you
Regards
Bala

Services for Objects Attachement List Display Note not Viewable

Hi Experts!
Good day! I'm trying to display a note in FK03 (related to Services for Objects - Attachment List) and I only see white screen pop up window. No message and text information. When I tried to use another PC I can successfully view it.
Is there's a plugin that I may need to install?
Your help will be greatly appreciated.

Hi Marty
It is my understanding that the IXOS licensing is based on users retrieving of documents not necessarily the viewer so the licensing implications of having non-IXOS viewers accessing documents using the generic archivelink viewer is still likely to result in licensing implications if an audit is conducted at any stage.
The transaction for specifying the viewer is the OAA3 and OAG4.
Regards,
Athol

Content server for Document attachment through "services for object" Icon.

Guys,
I have typical problem in installation of Content server for storing external documents.
We all know that we can attach the document in SAP using the icon SERVICES FOR OBJECT. By this we can attach the document to the specific object we want.
-Since my client wants only document attachment method not to completely implement SAP DMS, I proposed this method of attaching documents through services for object method.
-If documents are stored though services for object ,The attached document will directly get stored in sap database(correct me if I am wrong) while in DMS it ask you to select the storage location while u check in for any document
-By storing the doc thru "services for object " For long run when we store the documents in sap database our system will drastically get slow down.
-In this regard I have a plan to incorporate external storage server.
-Now I should know that how I should customize content server configuration so that the attachment through services for object will store into this content server I need to know how to define Client, Content Category, Content Repository, Document Area, Physical Machine, IP Address, Port. (OACT & OAC0)
I appreciate for immediate solution and Points will be rewarded for sure.
Regards,
Murali.S

Hi Murali,
Don't Worry, its possible,
All attachments can be stored in SAP Content Server also, but through archiving process.
Set up a database storage system.
Preparation
Make sure that the HTTP plugin is active.
Transaction SMICM, "Display Services" function key (shift F1)). The list of services must contain a port other than 0 for HTTP.If not, you must adjust the relevant profile parameter.
Typical entry:
icm/server_port_0 PROT=HTTP, PORT=1080, TIMEOUT=900
Make sure that the /sap/bc/contentserver service is active.
If no user is defined, then use transaction SU01 to create a new user. Use the "System" user type.Assign
the SAP_ALL and SAP_NEW profiles to the user. (Eg: HRUSER/PLMUSER/PPUSER etc)
Transaction SICF, select: default_host - sap - bc -contentserver. Select the function to display/change the service. Make sure that a user is defined.
Using the relevant data from the newly created user, maintain the anonymous logon data for the
/default_host/sap/bc/ service and save & activate the changes in transaction SICF. Double click on content server and give the user name which has been created (HRUSER/PLMUSER/PPUSER/MMUSER etc)
Check the system PSE.
Start transaction STRUST. Expand the system PSE. The system PSE must be "green" for each application
server.
Determine a suitable exchange directory.
The exchange directory must be accessible from each application server. If all application servers are running on the same platform (for example, Windows), one network directory that is accessible on all application server (for example,
server\share) is sufficient. You can generally use the global directory
(profile parameter DIR_GLOBAL).You can use the RSPARAM report to determine the profile parameters.
Setting up the storage
Create a table for storing the data. Using transaction SE11, create a copy of the SDOKCONT1
table. If you want to create the repository database, you can name the table ZCONT_DB, for example. Save the
table as a local object. Activate the table.
Create a repository.
Use transaction OAC0 to create a new repository.
Use the following parameters:
Repository Max. two characters, for example, Z1
DocArea: ARCHLINK
Storage type: R/3 database
Storage subtype: normal
Version no. : 0046
Contents table <table name> for example: ZCONT_DB
Exchange directory <directory name> for example:
server\share\
Make sure that the exchange list ends with a \ (or /on Unix).If you are using a variety of platforms, you must use transaction FILE to define a suitable logical file name and use this name. Save the settings.
1. Maintain view table TOAAR_C, via SM31
 Cross client table displayed as information, forget it
2. In field 'StSytm' you must entered 'Z1' as your system need, or anything that you need but you must configure HR Archive link too.
3. In field 'Arch.path' (direct above Spoolpath), entered path in your system, this real path in your operating system. May be you should confirm to your Basis consultant where exactly you could store picture files. So if you enter '/', your file exists at root directory at your UNIX system.
4. Choose 'File store' radio button
5. Save.
First
1. You have to create a number range for SAP ArchiveLink.
 IMG: Basis Components-> Basis Services -> SAP ArchiveLink -> Basic Settings-> Maintain number ranges
 (Trxn OANR). Create number range 01 from 0000000001 to 9999999999 without the external number flag.
2. Document type HRICOLFOTO must exist with document class JPG.
 IMG: Basis Components->Basis Services->SAP ArchiveLink->System Settings->Maintain document types
 (Table TOAVE, Trxn OAC2).
3. Document type HRICOLFOTO must be linked to object type PREL and Infotype PA0002.
 IMG: Personnel Management->Personnel Administration->Tools->Optical archiving->Set up Optical Archiving
 in HR. (View V_T585O, no Trxn). In the first two columns there are minuses, the third (Date) has
 a plus - don't put a flag in the check box.
4. Check which content repository (Archive) is linked to document type HRICOLFOTO and object type
 PREL. IMG: Basis Components->Basis Services->SAP ArchiveLink->Basic Settings->Maintain Links (Table
 TOAOM_C, Trxn).
Test
Test the repository.
Use transaction SE38 to start the RSCMSTH0 report. Specify your repository (i.e. Z1) and start the test.
The report must run without errors. If no problems occurred, you can use the new repository with Archive Link after you carry out the Archive Link Customizing. If problems do occur, check whether one of the related
notes helps.
For More Details :
http://service.sap.com/archivelink.

NOTE:- Screen Shots are missing, i was not able to paste here, One more thing is we did this for uploading a PHOTOS into Content Server, Similarly you have to create a REPOSITORY and Z-TABLE to bring all the Attachments from all the selected Objects and then route them to the CONTENT REPOSITORY.
Your Senior ABAP guy would help you in this, if not i may try to help you more by monday.
Regards
Rehman
Reward Your Points if Satisfied.

How to control button "services for object" which appears in cv01/02/03

Hi Gurus,
In tx cv01/02/03, I get a button at the top of the window called "services for object", which gives me options as ....
Create------(attachment/note/external document/Store business documents)
Attachment List
Private note
Send (Send object with note/Object outbox)
Relationships
Workflow
My objects
Help for object services
With the help of this button I can even attach documents in CV03 tx. through create attchment.
Can we control appearance of this button according to the transactions?? e.g. in CV01 and CV02 it should appear, but in CV03 it should not allow to create further attachments.....
Thanks in adavnce!
Regards,
Akshay

Thanks a ton Benakaraj !!
I am working on it...... will let you know the outcome....
I am just not clear abiout where to insert the sodes given in the pdf ??? pLease let me know.
Thanks a lot,
Akshay
Edited by: Akshay Kurhe on Jun 5, 2009 11:17 AM

Services for Object (GOS) Attachement List not showing after attachment

Hi All,
I have created a new entry for the Generic Object Service List and this links to a copy of the CL_GOS_SRV_ATTACHMENT_CREATE class (Create attachment) with some additional logic. However, after attaching a file, the "Attachment List" does not become available until after I re-enter the transaction. The attachment list is showing the correct attachments.
After some (understatement...) investigation, I found that even if I try and link the new service to a unchanged copy of the CL_GOS_SRV_ATTACHMENT_CREATE service in SGOSATTR, it is not working. It is attaching fine, but the "Attachment List" entry in the Services for Object Menu is still greyed out. If I attach the original class CL_GOS_SRV_ATTACHMENT_CREATE to the newly created entry it works fine. e.g. straight after I attach a file to the transaction, the menu entry becomes available.
I can't find where the re-draw of the GOS menu happens and hence can not determine what is going wrong. Does anybody know if this is part of the Kernel or is this actually done in ABAP ?
Am I missing something ? Debugging including system debugging for two days now and can't find it... very frustrating.
Any help would be appreciated.
Thanks,
Wouter.

Hi Wouter,
I had originally posted to ask if you had resolved this since I was facing the same issue, but then deleted my post when I was able to get it working. Sorry, I didn't mean to initiate a flurry of activity in such an old thread.
My scenario is I created a new GOS service entry in table SGOSATTR using transaction SGOSM. My new service uploads attachments to an external document management system via a call to a RESTful web service. The class I use in the SGOSM entry is a custom subclass of CL_GOS_SRV_URL_CREATE.
I resolved this issue by taking a look at what CL_GOS_SRV_URL_CREATE does in its EXECUTE method. The key bits to refresh the GOS Attachment List with the new attachment are...
raise event commit_required. " if SGOSM has the commit flag checked
raise event service_succeeded
       exporting eo_service = me.
These events tell any subscribers to go do their thing-- which in this case includes a refresh of the GOS Attachment List. So in the EXECUTE method of my custom subclass, after I call function BINARY_RELATION_CREATE, I raise these events...
CALL FUNCTION 'BINARY_RELATION_CREATE'
   EXPORTING
       obj_rolea     = gs_object
       obj_roleb    = rel_doc
       relationtype = 'URL'
   EXCEPTIONS
       OTHERS       = 1.
CASE sy-subrc.
   WHEN 0.
       MESSAGE s043(sgos_msg). " The attachment was successfully created
       RAISE EVENT commit_required.
       RAISE EVENT service_succeeded
             EXPORTING eo_service = me.
   WHEN OTHERS.
       MESSAGE s042(sgos_msg). " The attachment has not been created
ENDCASE.
I hope this is helpful to you even though your initial implementation was a while back. Thanks for replying to my question though!!
Cheers,
Amy

Services for object in me23n

Hi
I can see the "Services for object "functionality in ME23N transaction. I want to replicate the same functionality for my custom program.Is there any badi or Function Module .
Please let me know if I can get any pointers for this.
Regards
krishna

i solved myself................................
goto table SRGBTBREL
give RELTYPE = ATTA
INSTID_A = give ur pr no. with pre-attachement of 00
get details and use them in function module GOS_ATTACHMENT_LIST_POPUP
in this way u can replicate functionality of Services Of Objects
Edited by: krishna chaitanya on Sep 25, 2008 7:39 AM

Services for object in transaction EHSAMBTAET (Health Center Services)

Similar Messages

Maybe you are looking for