Services I never requested then a huge cancellation fee.

Last month I went to pay my bill and noticed I was being charged for internet service I did not request or approve. I should explain I tried comcast internet once before and never could get it to work despite trying multiple modems, so there's no way I would have approved internet service. The local comcast service center did nothing but refer me to a phone # where I spoke to a rep who finally cancelled my internet service and promised to refund the money I was charged for a self install kit. Now this month I look at my bill and find a $230 cancellation fee! My case has been assigned to a rep named Steven but he doesn't return my calls. I cannot even put into words how angry I am. I want my cable tv package and nothing more- no internet, no phone, just cable tv.Wayne

wgavic-
After reviewing your Corporate Escalation ticket, I see that you have an assigned agent working on concerns. I have emailed the agent requesting that he reach out to you. If you have any additional information you will like to provide, please send me a private messages the details of your concerns.

Similar Messages

ITunes fails to load. Message is Service Apple Mobile Device failed to start. Verify you have sufficient privileges to start system services. Never had this problem before trying to install this upgrade

iTunes fails to load. Message is "Service Apple Mobile Device failed to start. Verify you have sufficient privileges to start system services." Never had this problem before trying to install this upgrade. How do I fix this?

Dave, same problem here. And I did go in as admin to Administrative Tools, Services, Apple Mobile Devices and tried restarting the service. It seems there is a bug with the newest update, period. All of the normal "easy" steps don't work. Before I remove all of Apple's programs, including Bonjour....I'm running a full system scan.
But the answer will be to remove all of the Apple stuff, then reboot, then use whatever utility you have to remove all temp files...then go download and install it again. This has worked for several people (I read the thread before posting). Win 7 64bit. It just seems that Apple did not thoroughly test this new version. Period.
If Apple reads this...I have many computers...and whenever Apple wants to update something...it just about stops everything else that is going on. Total memory hog, even with 16G RAM and dual quad core processors. It has to learn to play nice with others.
After the scan and I'm sure an hour or two of work...I'll re-post.
Of course if you do image back-ups, as I do, you can simply restore your drive to its previous state and run the previous version of iTunes, declining the update, until Apple gets it right. Depending on the size of your drive, this could take hours. It is a matter of choice, of course.

HT1933 Hi. I have a problem with this receipt no. 190048666494. I did not purchase or Aurthorize this purchase request a refund or cancel this purchase. Thank you.

Hi. I have a problem with this receipt no. 190048666494. I did not purchase or Aurthorize this purchase request a refund or cancel this purchase. Thank you.

These are user-to-user forums, you are not talking to Apple here.
You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.

I am trying to connect to SharePoint in my Office 365 environment by following https://support.office.com/article/Set-up-the-SharePoint-Online-Management-Shell-environment-7b931221-63e2-45cc-9ebc-30e042f17e2c and I am getting:
Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.
Is there some setting I need to change on the O365 side? Thanks.

Hi,
Based on your description, my understanding is that you want connect SharePoint Online using PowerShell.
Please make sure that the following software is installed.
Windows Management Framework 3.0
SharePoint Online Management Shell
And then, open the SharePoint Online Management Shell and use the Script below to test
whether it works.
$User = "[username]@[tenant].onmicrosoft.com"
$Pass = "[password]"
$creds = New-Object System.Management.Automation.PSCredential($User,(ConvertTo-SecureString $Pass -AsPlainText -Force));
Connect-SPOService -Url https://[tenant]-admin.sharepoint.com -Credential $creds
Get-SPOSite
More information:
http://blog.falchionconsulting.com/index.php/2013/01/using-powershell-to-manage-sharepoint-2013-online/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Service cancellation fee

I need to cancel our service. We have 4 lines, all being smartphones. How do I do it? I'm SURE Verizon charges a cancellation fee, ha!

mimisan99 wrote:
If you cancel in the middle of your billing cycle...Verizon will give you some mumbo jumbo that the "port" didn't complete until the day before your next billing cycle. How convenient!!! I cancelled 3 weeks before my billing cycle and paid their early termination fee. I didn't have a problem paying that but I do have a problem paying them until the end of the cycle when I can't use the phone. They got an extra $75. So don't cancel in the middle of your cycle but then if you do, they will probably give you some **** about the "port" didn't finish until the next billing cycle. I guess either way your are screwed!!! Glad I am not a Verizon customer. BTW, I was transferred three times to learn that I wasn't getting my $75. bucks back. Good Luck!!!
Actually, paying for the full final month of service isn't "mumbo jumbo," it is part of the terms and conditions of the customer agreement:
WHAT HAPPENS IF MY POSTPAY SERVICE IS CANCELED BEFORE THE END OF MY CONTRACT TERM?
If you're signing up for Postpay Service, you're agreeing to subscribe to a line of Service either on a month–to–month basis or for a minimum contract term, as shown on your receipt or order confirmation. (If your Service is suspended without billing, that time doesn't count toward completing your contract term.) Once you've completed your contract term, you'll automatically become a customer on a month–to–month basis for that line of Service. If you cancel a line of Service, or if we cancel it for good cause, during its contract term, you'll have to pay an early termination fee. If your contract term results from your purchase of an advanced device, your early termination fee will be $350 minus $10 for each full month of your contract term that you complete. Otherwise, your early termination fee will be $175 minus $5 for each full month of your contract term that you complete. Cancellations will become effective on the last day of that month's billing cycle, and you are responsible for all charges incurred until then. Also, if you bought your wireless device from an authorized agent or third–party vendor, you should check whether they charge a separate termination fee.
It has nothing to do with the port. When you agree to the contract, you agree to pay for that final month. Most carriers do this. I had U.S. Cellular for a couple of years, and they had the same policy. I don't know about AT&T or T-Mobile, but I am fairly certain Sprint has the same terms as well. Knowing the terms of the contract you agreed to saves time, hassle, and frustration. Also you don't have to pay two companies for a one month of service.

Create Z service for leave request

Hi All,
with reference to "ESS in MSS"
Leave request :
"In a similar fashion you can create a Z service for leave request and attach the resource of Leave request which is standard one to it
EMPLOYEE_WORKTIME_LEAVEREQUEST05 to the Sub Area MSS_HCM_SUB_RELATEDACTIVITY_ESS. "
how do i create a z service for leave request?
Regards

I think you wish to use ESS Leave Request in MSS.......
Tcode SPRO...
Cross-Application Components -> Homepage Framework -> Services
Define Services
Copy existing and create your own....
EMPLOYEE_WORKTIME_LEAVEREQUEST
to
ZXXX_EMPLOYEE_WORKTIME_LEAVEREQUEST
EMPLOYEE_WORKTIME_LEAVEOVERVIEW
to
ZXXX_EMPLOYEE_WORKTIME_LEAVEOVERVIEW
Associate a Z resource or existing resource with it....
Then map this Z service with Sub area
"Assign Services to Subareas"
Do not forget to give "Position"
Revert back if you face any issue......
Edited by: Saurabh Agarwal on Jul 20, 2011 12:32 PM

Never requested Yahoo and lately has been taking over my Tabs.

For the past week or so Yahoo has been coming up on my screen for example replacing my AOL email session even though I never requested it and was trying to open an email from a friend and or eBay. I tried removing Yahoo from my computer and cannot find it as a standalone program and the only place it is visible is within the Firefox application. What can I do to prevent or remove this program / Application from doing this?

Hi,
This has just happened to me too, seems it has to do with the yahoo messenger, found the solution here: http://uk.search.yahoo.com/?type=769480&fr=spigot-yhp-ffmac
I'm on a Mac OS X version 10.7.5 and Firefox 18.0.2
I tried changing start page, deleting cookies as advised, deleting search engines, deleted two suspicious new add-ons:
Amazon shopping assistant by Spigot and Ebay shopping assistant by Spigot but every time would have the same problem after rebooting firefox. Finally, reseting the "keyword.URL" as advised did work:
Step 1: Open a new Firefox browser window.
Step 2: Type about:config in the search field and press Enter.
Step 3: Click the "I Will Be Careful" button if necessary.
Step 4: Scroll to find a configuration key titled: keyword.URL
Step 5: Select "keyword.URL" and right-click, then hit "Reset" from the drop-down menu.
This happened on my computer after installing the yahoo messenger app on my android tablet. I wonder if it was that.
Anyway, now everything works again. Hope you find this helpful.

"Error Message" "There are currently no logon servers available to service the logon request"

Full Error Message
"(shared network name)is not accessible. you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permissions. There are currently no logon servers available to service the logon
request"
When trying to enter via "Map Network Drive" and click "Connect using different credentials", once entering the credentials, error
"The Network folder specified is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share."
As I am not particularly tech savvy, am not the one who set up this network drive, I dont want to interfere with it too much. I simply want to be able to get a basic understanding of the issue. We had set up a previous share, since deleted, that allowed
us to have a shared folder to work on documents between the US and Ireland. This new share has been working fine up until yesterday, when we got the above error messages when trying to access the share. Later in the day, it just worked again. Today, I go to
open the folder and the same error messages turned up, what could be going on??

Hi Tomas,
Did your computer join the domain? How did you access that shared resource?
Please turn off your firewall temporarily and type the correct UNC address to access for test:
\\servername\sharename \file_path
If it doesn't work, use the IP address of the remote server when you try to connect to the network share.
Meanwhile, please read this reference:
Resolving Network Issues-You Might Not Have Permission To Use This Network Resource
http://blogs.technet.com/b/danstolts/archive/2011/06/21/resolving-network-issues-you-might-not-have-permission-to-use-this-network-resource.aspx
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

LaserJet Pro 200 color MFP M276nw/ a code 79 service error turn off then on, on screen the product

I have an HP LaserJet Pro 200 color MFP M276nw. I keep getting a code 79 service error turn off then on, on screen the product

I have same problem - this doesn't help. Did you did something that worked?

Changing network password...There are currently no logon servers available to service the logon request in Windows 8 and 8.1 Enterprise

We currently are running Windows 7 in our enterprise environment. Everything works as expected when the user tries to
change their network password via crtl+alt+del, change a password. We are now testing and trying to deploy Windows 8.1 to a test group and are running into an issue when any AD user tries to change their network password. The user can logon to the
PC just fine when the PC is on the domain, however as soon as they go to change their password they are getting the error "There are currently no logon servers available to service the logon request". The end result is that the user can not change
their password. We tried this via connected to the dock with a network cable, on corporate wireless, with a Windows 8.1 machine completely patched over with all Microsoft patches, and a Windows 8.1 machine that is not patched and are running into the same
issue. Has anyone ran into this? Is there something that has to be changed on the infrastructure side?

Hi,
Please check the following KB:
Error message when you try to log on to a Windows Server 2008-based RODC: "There are currently no logon servers available to service the logon request"
http://support.microsoft.com/kb/949048
To configure the Password Replication Policy for an RODC, a member of the Domain Admins group is required.
By default, RODC's do not cache any user or computer passwords, neither a user or computer will be able to authenticate. You can however specifiy that their passwords be cached either by including a group or specific user in the Password Replication Policy
on the RODC at the remote site.
RODC - Password Replication Policy and Password Cache Management
http://blogs.dirteam.com/blogs/paulbergson/archive/2010/09/22/rodc-password-replication-group-management.aspx
Password Replication Policy Administration
http://technet.microsoft.com/en-us/library/cc753470(v=ws.10).aspx
For further information about the Windows Server side, I suggest you ask Windows Server forum:
https://social.technet.microsoft.com/Forums/en-US/home?category=windowsserver
Karen Hu
TechNet Community Support

There are currently no logon servers available to service the logon request

I am trying to recover from a catastrophic SBS 2008 disk failure.
This machine was a stand-alone Domain Controller, and as luck would (NOT!) have it, both disks in a RAID1 configuration failed in rapid succession. Therefore, all I have is server backups to work with.
I have tried many permutations to get this data restored and the domain functional again, but so far, no dice.
I have successfully restored the system disk data from the most recent backup, but when I go to boot the system, I get a reboot loop. When I tell it not to reboot on error, it gives me:
S c00002e2 Directory Services could not start because of the following error: A device attached to the system is not functioning. Error Status: 0xc0000001. Please shutdown this system and
reboot into Directory Services Restore mode, check the event log for more detailed information.
When I reboot into Directory Services Restore Mode, the system quickly says that AD is clean, but doesn't take me to a command prompt, it takes me to the login screen. When I try to log in as Domain admin, it says:
There are currently no logon servers available to service the logon request
And I'm stuck. Unless I can somehow find out what the local admin credentials are, I can't get in to the system.
I have removed the disk and put it in a Hard drive enclosure, so I can access the files.
At first, I had some complaints about the disk driver, so I found the correct driver version from Intel to circumvent that problem when doing the restore.
I can boot from the installation disk, but I can't use wbadmin from there in the restore mode.
Right now, I'm trying an earlier backup, but something tells me I might have some real trouble here. This has turned in to quite the mess.
I have also tried reinstalling the OS to a new RAID array, but am loath to try putting the backup on there for fear I will be taken back to square one.
Do I have to start from scratch and recreate the domain and rejoin all the computers to it, or do I have a better alternative?
I have actually restored a SBS 2008 stand-alone DC from backup before, but that was RAID 5, so slightly different. I seem to remember having some driver headaches with that, but I did overcome them by getting into recovery and replacing the driver files
on the disk. Tried that here, but still no luck.
HELP!!!!

Hi
Please chek these articles and follow step by step procedures;
http://blogs.technet.com/b/sbs/archive/2010/06/11/how-to-perform-a-bare-metal-restore-on-small-business-server-2008.aspx
http://blogs.technet.com/b/sbs/archive/2011/03/31/how-to-perform-an-authoritative-system-state-restore-in-sbs-2008-2011-standard.aspx
https://technet.microsoft.com/en-us/library/cc771290(v=ws.10).aspx
also you need to directory services restore mode(DSRM) password for restore AD DS.if you dont know
check this article how to reset it;
https://support.microsoft.com/en-us/kb/322672?wa=wsignin1.0

How to create a service call for more then one item

Hi All,
How to create a service call for more then one item. i.e. the service call should be logged for more then one item

As you noticed this is not possible by design.
Maybe you could have a dummy item for that purpose and register the real items to be handled in a UDT...
HTH

"There are currently no logon servers available to service the logon request." when trying to access a shared folder in domain environment.

Hi,
I already have a windows server 2003 working as a Primary Domain Controller (PDC) and now I created another windows server 2012 to work as an Additional Domain Controller (ADC).
- PDC is doing (Active directory domain services + DNS + DHCP)
- ADC is doing (Active directory domain services + DNS)
For testing purposes, I shutdown the PDC and let the ADC up and running. Now, Whenever I try to access a shared folder on any server in the domain, I got this message "\\x.x.x.x is not accessible. You might not have permission to use this network resource.
Contact the administrator of this server to find out if you have access permissions.
There are currently no logon servers available to service the logon request."
Actually, the replication of AD objects and DNS records between the PDC and ADC is done successfully. I also can resolve names using the ADC's DNS. Also, I can ping servers hosting the files I want to access.
Appreciate your help.

The PDCe is required for a lot of services, to include DFS.
Turn the PDC back on and try again. If it's still not working, ensure the file server has the correct DNS entries on the NIC.
I think I see what you were trying to test. The issue is that not all DCs are equal. Yes, they hold the same information, but some DCs do extra work. That is why FSMOs exist.
Let me know how it goes.
- Chris Ream -
**Remember, if you find a post that is helpful, or is the answer, please mark it appropriately.**

Ipad keeps requesting outlook password, trying cancel but still in cycle - can not do anything else. NOTE - recently change email password on PC

ipad keeps requesting outlook password, trying cancel but still in cycle - can not do anything else. NOTE - recently change email password on PC

Try a reboot:
To reboot your iPad, hold down the sleep/wake button and the home button simultaneously until the screen goes black and the Apple logo appears. If, during this process, a slider appears on the screen to power it off, ignore it and keep holding the buttons down.
Rebooting your iPad can solve a lot of problems. Once you do that, go into Settings > Mail, Contacts, Calendars and make sure the correct, new password is entered in that account.

When I sync my devices its starts to sync then it says "canceling sync" how do I fix this problem?, When I sync my devices its starts to sync then it says "canceling sync" how do I fix this problem?

When I sync my devices its starts to sync then it says "canceling sync" how do I fix this problem?, I am running iOS7 on my devices and the newest version of iTunes on my MacBook Pro with Mavericks.

The first thing that I always do when I have issues syncing is quit iTunes, restart my Mac and reboot my device.
Reboot your device by holding down on the sleep and power buttons at the same time for about 10 seconds until the Apple logo appears on the screen and then let go of the buttons.

Services I never requested then a huge cancellation fee.

Similar Messages

Maybe you are looking for