Services in a two node installation

Hi,
we have 2 node installation of R12.1.1
Node A: Database & Batch Processing
Node B: Application Services(Root service, web entry point services, web application services & other services)
One thing i need to clarify
Should i have to select root services in primary application node(node A)
if selecting root services at primary application node then i have to select web entry point services and web applicatio services compulsory at node A
Please explain
Thanks,
Jak
Edited by: user12257829 on Nov 22, 2009 9:53 PM

Hi,
According to your configuration, root services should be enabled on (Node B). In addition to "Oracle Applications Installation" manual, please see (Note: 406558.1 - Configuring Applications Node Services in Oracle E-Business Suite Release 12) for details.
Regards,
Hussein

Similar Messages

Two node installation with 2 concurrent managers..

Need your help. I have 12.1.1 Two node installation on Linux 5.9 with 64 bit.
Linux2- Database server + Concurrent manager
Linux1- Apps Node
Port - 8002 (port pool -2)
on my app node - linux1, I have 2 directories <SID>_linux1 and <SID>_linux2. First one is for primary apps node and second one is for 2nd concurrent manager. It is a shared directory structure. I have 2 questions:
1) If I run the autoconfig on Linux1, I can run all the services and connect to apache. However, If I run the autconfig on linux2, I will not be able to connect to web server (for a short time request will be sent to Linux1 and then it gets forwarded to Linux2 - even though Linux2 is not app server).
2) How do I run the second concurrent manager on LInux2? After I run the 2 concurrent manager, how do I test both concurrent managers are working?
Your help is much appreciated.

Hi Hussein,
Thank you for the info. I was wondering whether the Linux2 concurrent manager was installed correctly or not. I went to xml file and found these entries and it made me think, it didn't install correctly because only concurrent manager should have been yes and the rest should be no. Isn't it? If it is wrong, how do I correct this?
<oa_system_config>
         <TIER_DB oa_var="s_isDB">NO</TIER_DB>
         <TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
         <TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
         <TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
         <TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
         <TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
         <TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
         <TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
         <config_option type="techstack" oa_var="s_techstack">as1013</config_option>
         <config_option type="techstack" oa_var="s_tnsmode">generateTNS</config_option>
         <config_option type="adx" oa_var="s_apps_version">12.1.1</config_option>
         <config_option type="techstack" oa_var="s_apache_mode">NORMAL</config_option>
         <ias_version oa_var="s_ias_version">10.1.3.4.0</ias_version>
      </oa_system_config>

Adadmin on 11i with two-node installation

I have two-node installation of 11.5.5.
Am I possible to use adadmin on both nodes at the same time (parallely)
Regards

Hi,
Can you please send me the doc to [email protected]
TIA,
Senthil Kumar.

R12 two node installation

Hi All,
I have to do two node R12 installation, please guide me how to procede because I could not see any option like "Sinlge node " and "Mult node" as it was in 11i, I want to have my database on one server and my application on second server
Regds

Hi
I am new to Oracle E-business suite. I am trying to install R12 on single node/sincgle user istall on Linux 32bit. I followed the Oracle Doc ID:4012310.1 and follwoing the instructions from http://download-east.oracle.com/docs/cd/B40089_09/current/acrobat/120oaig.pdf.
I created stage area by extracting the files downloaded from Oracle edelivery site.
Created user "Oracle" and gave permissions to access stageR12 directory.
Logged in as Oracle and try to run ./rapidwiz throws the follwoing error:
Rapid Install wizard is validating your filesystem.....
4 DVD labels found
Rapid install wizard will now launch the java interface .....
[oracle@localhost rapidwiz]$ Exceprion in the thread "main" java.lang.noclassdeffounderror:
Orcle/apps/ad/util/logfile
at oracle.apps.as.rapidwiz.RIWizard.main(RIWIZard.java.1419)
Please help
Thanks
Raj

12.1.1 Two Node Installation

Hi,
Node 1:
DB + CM + Reports
Node 2:
Forms + Web
While doing Installation in Node1, I have selected the following services in APplications to enable for CM and Reports
1. Batch Processing
For Node2, I have given the following for Forms and Web
1. Root Processes
2. Web Entry Point Services
3. Web Application Services
4. Other
Please let me know, if I was wrong?

Hi,
As per the installation document (Page 2-22) ..
When installing, be aware of the following important service dependencies:
When you select Root Services, the Web services are automatically selected as well. This is because Web Entry Point Services, Web Application Services, and Root Services must all be installed on the same node.
Thanks,
Hussein

How to migrate a two node ISE installation to a six node ISE installation

How do we migrate from a two node ISE installation where the primary ISE has IP address A and the
secondary has IP address B to a six node ISE distributed installation with one primary admin ISE,
one secondary admin ISE, one primary monitoring ISE, one secondary monitoring ISE and
one PSN ISE with IP address A and finaly one PSN ISE with IP address B?
It is a production environment so we want to do the transition with minimal service impact.

I would assume your current setup is
Node 1 - Primary Admin, Secondary Monitor, PSN
Node 2 - Secondary Admin, Primary Monitor, PSN
Here is a high-level overview of what I think should be done. Keep in mind that it is only my opinion and ultimately I would recommend working with TAC to validate the process to ensure there is minimal impact.
TAKE A BACKUP of Configuration and Operational data.
Install the additional 4 nodes.
Register one as the secondary monitor. This should remove the secondary monitoring role from the other node.
Register another node as the primary monitor. This should remove the primary monitoring role from the other node.
Register the last two nodes as administration nodes in the same process, doing the secondary admin node first, then finally the primary admin node. This should leave the remaining PSN personas installed as the only persona on the original admin nodes.

When we create one service as preferred on both nodes in two node RAC

How to configure listener,tnsnames.ora & listener file When we create one service as preferred on both nodes in two node RAC ... ( I don't need load balancing here but i just want to create service as preferred on both nodes)
please some one help me in this ..

Thanks alot Sebastain for your reply..
I am using 10.2.0.4 version and below tns entry is from my client side tns entry ..
M4AMPRD_TEST=
(DESCRIPTION=
(ADDRESS= (PROTOCOL=TCP) (HOST=153.88.184.228) (PORT=1521))
(ADDRESS= (PROTOCOL=TCP) (HOST=153.88.184.229) (PORT=1521))
(FAILOVER=ON)
(CONNECT_DATA=(SERVICE_NAME=M4AMPRD_TEST)
(FAILOVER_MODE=
(TYPE=SELECT)
(METHOD=BASIC)
(RETRIES=20)
(DELAY=5)
service creation: srvctl add service -d M4AMPRD -s M4AMPRD_TEST -r M4AMPRD1,M4AMPRD2
But when i connect to database usign above service from client some times its working fine and some times its failing please see below log with timings how it is behaving ..
SQL> set time on
18:39:46 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
Connected.
18:39:48 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Warning: You are no longer connected to ORACLE.
18:39:52 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
Connected.
18:39:53 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
Connected.
18:39:55 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
Connected.
18:39:57 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
ERROR:
ORA-12545: Connect failed because target host or object does not exist
Warning: You are no longer connected to ORACLE.
18:39:59 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
Connected.
Thanks for your help in advance
Anil Vejendla..

Configure OEM in Oracle 10.2.0.4 Two nodes RAC

Hi all,
I'm having some troubles making rigth configuration for OEM in my RAC.
Everything during installation or configuracion seems ok but later it's all wrong.
The point is:
Global database is ON and every of two nodes is also ON. I can accees it from inside and outside the server nodes.
CRS shows everything OK with all services and resources ONLINE.
emctl status dbconsole -clusterhttps://node2:5500/em/console/aboutApplication
EM Daemon is running.
emca -displayConfig dbcontrol -clusterINFO:
**************** Current Configurationl ****************
INSTANCE NODE DBCONTROL_UPLOAD_HOST
inode2 node2 node2
inode1 node1 node2
So everything should be OK
When I try to access OEM, it says that status can't be acess and offers me the choice of START or BEGIN RECOVER
When I go through START the two nodes are up but can't access the instances.
So I know that something has wrong configuracion but I don't know WHAT!!!
Any Idea???
Thanks in advance

Start looking at the logs under $OH/<node_name>/sysman/log - most likely it will offer some clues.

System error 1460 has occurred (0x000005b4). when trying to create two-node cluster in R2

I'm trying to create a brand new two node Windows 2008 R2 Enterprise 64bit cluster. When I try with the GUI I get the following:
An error occurred while creating the cluster.
An error occurred creating cluster 'printcluster'.
This operation returned because the timeout period expired
When I try via command prompt using the following command:
cluster /cluster:PrintServices /create /nodes:"node1 node2" /ipaddr:10.9.11.194/255.255.255.0
I get the following:
4% Initializing Cluster PrintServices.
9% Validating cluster state on node <node1>.
13% Searching the domain for computer object PrintServices
18% Creating a new computer object for PrintServices in the domain
22% Configuring computer object PrintServices as cluster name object
27% Validating installation of the Microsoft Failover Cluster Virtual Adapter on node <node1>.
31% Validating installation of the Cluster Disk Driver on node <node1>.
36% Configuring Cluster Service on node <node1>.
40% Validating installation of the Microsoft Failover Cluster Virtual Adapter on node <node2>.
45% Validating installation of the Cluster Disk Driver on node <node2>.
50% Configuring Cluster Service on node <node2>.
54% Starting Cluster Service on node <node1>.
54% Starting Cluster Service on node <node2>.
59% Forming cluster PrintServices.This phase has failed for Cluster object 'PrintServices' with an error status of 1460 (0x000005B4).
Cleaning up <node1>.
Cleaning up <node2>.
Cleaning up PrintServices.
When I run a Cluster validation, I get 100% Green, no errors.
My disks are SAN Attached.
I have other Windows 2008 non-R2 clusters that never had this problem... Any ideas?
-PaulPaul S

Hi Paul,
I suggest trying the following steps to troubleshoot this issue:
1. Open Registry Editor.
2. Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}
3. Under this subkey, find the subkey that holds a DriverDesc string value entry whose value is "Microsoft Failover Cluster Virtual Adapter."
4. Under the subkey that you found in step 3, add the following string value registry entry:
Name: DatalinkAddress
Value data: 02-AA-BB-CC-DD-01
5. Restart the computer.
6. Repeat step 1 through step 5 on other computers on which you experience this problem. When you do this on other computers, replace the value data of the registry with different values in order to set a unique value for each node. For example, set the value on the second node to 02-AA-BB-CC-DD-02, and set value on the third node to 02-AA-BB-CC-DD-03. If you notice this behavior on distinct clusters, make sure that you use an address for each node that is unique across all clusters.
7. On each computer that you want to make a cluster node, use the Server Manager console to remove the Failover Clustering feature.
8. Restart each computer from which you have removed the Failover Clustering feature.
9. Add the Failover Clustering feature on all these computers again.
10. Run cluster validation against these computers.
11. Try creating a cluster.
If the issue persists, please let me know what errors are logged in Event Logs.
Tim Quan - MSFT

How to install Enterprise manager on two node cluster

Hi,
I am new to Oracle working on 10g
can anyone post a document or link for step by step installation of oracel 10g enterprise manager on a two node cluster?
Thanks in advance.

userArshad wrote:
Thanks Hans.
To be specific I have to install Database control .that means I need to use the GUI .
Also I could see database control and DBconsole service on on 1st node but I cannot find that in 2nd node.That is the normal configuration - you use the DB Control from node 1 and it gets the information using the agent on Node 2. The DB Console then displays the information for both nodes.
Please note that the DB Control will place a relatively heavy load on each machine, which is why we want to restrict our load to the agent. It is for that reason that we prefer to use the Grid Control whenever possible - it provides the same mechanism and screens, but the JEE platform is on a separate machine and all you have on the RAC nodes is the agent.
But if you really want to run the DB Console from each node (again, not normally needed) you need to use emca to configure it on the second node. Metalink note 863631.1 should help you with that.

Simple two node Cluster Install - Hung after reboot of first node

Hello,
Over the past couple of days I have tried to install a simple two node cluster using two identical SunFire X4200s, firstly following the recipe in: http://www.sun.com/software/solaris/howtoguides/twonodecluster.jsp
and when that failed referring to http://docs.sun.com/app/docs/doc/819-0912 and http://docs.sun.com/app/docs/doc/819-2970.
I am trying to keep the install process as simple as possible, no switch, just back to back connections for the internal networking (node1 e1000g0 <--> node2 e1000g0, node1 e1000g1 <--> node2 e1000g1)
I ran the installer on both X4200s with default answers. This went through smoothly without problems.
I ran scinstall on node1, first time through, choosing "typical" as suggested in the how to guide. Everything goes OK (no errors) node2 reboots, but node1 just sits there waiting for node2, no errors, nothing....
I also tried rerunning scinstall choosing "Custom", and then selecting the no switch option. Same thing happened.
I must be doing something stupid, it's such a simple setup! Any ideas??
Here's the final screen from node1 (dcmds0) in both cases:
Cluster Creation
Log file - /var/cluster/logs/install/scinstall.log.940
Checking installation status ... done
The Sun Cluster software is installed on "dcmds0".
The Sun Cluster software is installed on "dcmds1".
Started sccheck on "dcmds0".
Started sccheck on "dcmds1".
sccheck completed with no errors or warnings for "dcmds0".
sccheck completed with no errors or warnings for "dcmds1".
Configuring "dcmds1" ... done
Rebooting "dcmds1" ...
Output from scconf on node2 (dcmds1):
bash-3.00# scconf -p
Cluster name: dcmdscluster
Cluster ID: 0x47538959
Cluster install mode: enabled
Cluster private net: 172.16.0.0
Cluster private netmask: 255.255.248.0
Cluster maximum nodes: 64
Cluster maximum private networks: 10
Cluster new node authentication: unix
Cluster authorized-node list: dcmds0 dcmds1
Cluster transport heart beat timeout: 10000
Cluster transport heart beat quantum: 1000
Round Robin Load Balancing UDP session timeout: 480
Cluster nodes: dcmds1
Cluster node name: dcmds1
Node ID: 1
Node enabled: yes
Node private hostname: clusternode1-priv
Node quorum vote count: 1
Node reservation key: 0x4753895900000001
Node zones: <NULL>
CPU shares for global zone: 1
Minimum CPU requested for global zone: 1
Node transport adapters: e1000g0 e1000g1
Node transport adapter: e1000g0
Adapter enabled: no
Adapter transport type: dlpi
Adapter property: device_name=e1000g
Adapter property: device_instance=0
Adapter property: lazy_free=1
Adapter property: dlpi_heartbeat_timeout=10000
Adapter property: dlpi_heartbeat_quantum=1000
Adapter property: nw_bandwidth=80
Adapter property: bandwidth=70
Adapter port names: <NULL>
Node transport adapter: e1000g1
Adapter enabled: no
Adapter transport type: dlpi
Adapter property: device_name=e1000g
Adapter property: device_instance=1
Adapter property: lazy_free=1
Adapter property: dlpi_heartbeat_timeout=10000
Adapter property: dlpi_heartbeat_quantum=1000
Adapter property: nw_bandwidth=80
Adapter property: bandwidth=70
Adapter port names: <NULL>
Cluster transport switches: <NULL>
Cluster transport cables
Endpoint Endpoint State
Quorum devices: <NULL>
Rob.

I have found out why the install hung - this needs to be added into the install guide(s) at once!! - It's VERY frustrating when an install guide is incomplete!
The solution is posted in the HA-Cluster OpenSolaris forums at:
http://opensolaris.org/os/community/ha-clusters/ohac/Documentation/SCXdocs/relnotes/#bugs
In particular, my problem was that I selected to make my Solaris install secure (A good idea, I thought!). Unfortunately, this stops Sun Cluster from working. To fix the problem you need to perform the following steps on each secured node:
Problem Summary: During Solaris installation, the setting of a restricted network profile disables external access to network services that Sun Cluster functionality uses, ie: The RPC communication service, which is required for cluster communication
Workaround: Restore external access to RPC communication.
Perform the following commands to restore external access to RPC communication.
# svccfg
svc:> select network/rpc/bind
svc:/network/rpc/bind> setprop config/local_only=false
svc:/network/rpc/bind> quit
# svcadm refresh network/rpc/bind:default
# svcprop network/rpc/bind:default | grep local_only
Once I applied these commands, the install process continued ... AT LAST!!!
Rob.

Upgradation of Primary (RAC) two node database and single node standby DB

We have our primary setup in Oracle RAC in 10g R2 (10.2.0.1.0) in HP UX 11i 64bit (PA RISC). It is a two node RAC.
And we have a single node standby database (DR).
Both the primary and standby database are existing in 10.2.0.1.0
We need to upgrade the primary and standby database from 10.2.0.1.0 to 10.2.0.4.0
Am planning to go through the DBUA method for upgrading the database.
I like to know is there any special cases for upgrading both the primary and standby database.
since as i mentioned i will upgrade the database through dbua method, and if i upgrade my standby database as same as primary,
will it forcefully open the database, because while we upgrade the database through dbua it will open the database at the end of installation.
Is it possible to upgrade the standby database with DBUA method even when my standby database is in Mount state.
I will be helpfull if anyone has done this earlier, are there any know issues and is there any good document which i can refer.
with regards
A.Aravind

hi,
thanks for your reply, and i was following the document.
I like to know that is it mandatory to create a new Oracle Home for upgrading from 10.2.0.1.0 to 10.2.0.4.0
or i can proceed the installation of software in the same oracle home.
I will list out my action plan, please correct me if am wrong,
In Primary RAC,
a) Shutdown the database
b) Shutdown the asm instance
c) Stop the nodeapps services
d) Stop the cluster ready services.
e) Stop the enterprise manager
f) Stop the isqlplus
In Standby single node database,
1)Cancel the managed Recovery process
2) shutdown the database
3) Shutdown the asm instance.
PATCHING Process
g) Apply the oracle clusterware patch 10.2.0.4.0 in the same old existing ORA_CRS_HOME
h) Apply the oracle database software patch 10.2.0.4.0 in the same old existing ORACLE_HOME
Note: In my case both the ORACLE_HOME and ASM_HOME are in the same location.
i) Execute dbua to update the database in the primary database.
j) Apply the 10.2.0.4.0 patch in standby database ORACLE_HOME where as ORACLE_HOME and ASM_HOME are in the same location
k) Copy the recently generated archive logs from primary to standby manually and apply in standby database.
l) Mount the database in standby
m) Start the Managed recovery process.
with regards
A.Aravind

How to add a second database along with existing two node RAC environment

Hi,
I was wondering if anyone can help me with this.
My Environment:
1. Two node RAC Cluster database (11.2.0.2) with ASM running perfectly (Oracle Sid = test-1)
2. I have installed a second single instance db on node 2 (Oracle Sid = test-2) with NTFS file system for datafiles
3. Database is up and running, but I am not able to connect it from any client.
4. I am getting ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
5. Database (test2) is registered with grid LISTENER
5. TNSPING from client machine response is ok
Am I missing something here, happy to provide more info if requested.
Thanks,
PS

C:\Users\root.test_prod>lsnrctl
LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 23-FEB-2012 11:58:05
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Production
Start Date 18-FEB-2012 19:51:47
Uptime 4 days 16 hr. 6 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\11.2.0\grid\network\admin\listener.ora
Listener Log File C:\app\11.2.0\grid\log\diag\tnslsnr\IRIS11G-DB-2\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\LISTENERipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.30.0.202)(PORT=1520)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.30.0.215)(PORT=1520)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm2", status READY, has 1 handler(s) for this service...
Service "test-11gRAC.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Service "test-11gRXDB.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Service "irisapps.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Service "test-2" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
Service "test-2XDB" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL> service
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1322 refused:0 state:ready
LOCAL SERVER
Service "test-11gRAC.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1829 refused:0 state:ready
LOCAL SERVER
Service "test-11gRXDB.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: IRIS11G-DB-2, pid: 4496>
(ADDRESS=(PROTOCOL=tcp)(HOST=IRIS11G-DB-2.test_prod.internal)(PORT=57695))
Service "irisapps.test_prod.internal" has 1 instance(s).
Instance "test-11gr2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1829 refused:0 state:ready
LOCAL SERVER
Service "test-2" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "test-2XDB" has 1 instance(s).
Instance "test-2", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: IRIS11G-DB-2, pid: 9340>
(ADDRESS=(PROTOCOL=tcp)(HOST=IRIS11G-DB-2.test_prod.internal)(PORT=58653))
The command completed successfully
LSNRCTL>

Testing ha-nfs in two node cluster (cannot statvfs /global/nfs: I/O error )

Hi all,
I am testing HA-NFS(Failover) on two node cluster. I have sun fire v240 ,e250 and Netra st a1000/d1000 storage. I have installed Solaris 10 update 6 and cluster packages on both nodes.
I have created one global file system (/dev/did/dsk/d4s7) and mounted as /global/nfs. This file system is accessible form both the nodes. I have configured ha-nfs according to the document, Sun Cluster Data Service for NFS Guide for Solaris, using command line interface.
Logical host is pinging from nfs client. I have mounted there using logical hostname. For testing purpose I have made one machine down. After this step files tem is giving I/O error (server and client). And when I run df command it is showing
df: cannot statvfs /global/nfs: I/O error.
I have configured with following commands.
#clnode status
# mkdir -p /global/nfs
# clresourcegroup create -n test1,test2 -p Pathprefix=/global/nfs rg-nfs
I have added logical hostname,ip address in /etc/hosts
I have commented hosts and rpc lines in /etc/nsswitch.conf
# clreslogicalhostname create -g rg-nfs -h ha-host-1 -N
sc_ipmp0@test1, sc_ipmp0@test2 ha-host-1
# mkdir /global/nfs/SUNW.nfs
Created one file called dfstab.user-home in /global/nfs/SUNW.nfs and that file contains follwing line
share -F nfs –o rw /global/nfs
# clresourcetype register SUNW.nfs
# clresource create -g rg-nfs -t SUNW.nfs ; user-home
# clresourcegroup online -M rg-nfs
Where I went wrong? Can any one provide document on this?
Any help..?
Thanks in advance.

test1# tail -20 /var/adm/messages
Feb 28 22:28:54 testlab5 Cluster.SMF.DR: [ID 344672 daemon.error] Unable to open door descriptor /var/run/rgmd_receptionist_door
Feb 28 22:28:54 testlab5 Cluster.SMF.DR: [ID 801855 daemon.error]
Feb 28 22:28:54 testlab5 Error in scha_cluster_get
Feb 28 22:28:54 testlab5 Cluster.scdpmd: [ID 489913 daemon.notice] The state of the path to device: /dev/did/rdsk/d5s0 has changed to OK
Feb 28 22:28:54 testlab5 Cluster.scdpmd: [ID 489913 daemon.notice] The state of the path to device: /dev/did/rdsk/d6s0 has changed to OK
Feb 28 22:28:58 testlab5 svc.startd[8]: [ID 652011 daemon.warning] svc:/system/cluster/scsymon-srv:default: Method "/usr/cluster/lib/svc/method/svc_scsymon_srv start" failed with exit status 96.
Feb 28 22:28:58 testlab5 svc.startd[8]: [ID 748625 daemon.error] system/cluster/scsymon-srv:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 537175 daemon.notice] CMM: Node e250 (nodeid: 1, incarnation #: 1235752006) has become reachable.
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 525628 daemon.notice] CMM: Cluster has reached quorum.
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 377347 daemon.notice] CMM: Node e250 (nodeid = 1) is up; new incarnation number = 1235752006.
Feb 28 22:29:23 testlab5 Cluster.RGM.rgmd: [ID 377347 daemon.notice] CMM: Node testlab5 (nodeid = 2) is up; new incarnation number = 1235840337.
Feb 28 22:37:15 testlab5 Cluster.CCR: [ID 499775 daemon.notice] resource group rg-nfs added.
Feb 28 22:39:05 testlab5 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<5>:cmd=<null>:tag=<>: Calling security_clnt_connect(..., host=<testlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Feb 28 22:39:05 testlab5 Cluster.CCR: [ID 491081 daemon.notice] resource ha-host-1 removed.
Feb 28 22:39:17 testlab5 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<5>:cmd=<null>:tag=<>: Calling security_clnt_connect(..., host=<testlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Feb 28 22:39:17 testlab5 Cluster.CCR: [ID 254131 daemon.notice] resource group nfs-rg removed.
Feb 28 22:39:30 testlab5 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_validate> for resource <ha-host-1>, resource group <rg-nfs>, node <testlab5>, timeout <300> seconds
Feb 28 22:39:30 testlab5 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_validate>:tag=<rg-nfs.ha-host-1.2>: Calling security_clnt_connect(..., host=<testlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Feb 28 22:39:30 testlab5 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_validate> completed successfully for resource <ha-host-1>, resource group <rg-nfs>, node <testlab5>, time used: 0% of timeout <300 seconds>
Feb 28 22:39:30 testlab5 Cluster.CCR: [ID 973933 daemon.notice] resource ha-host-1 added.

11g r2 non rac using asm for sun cluster os (two node but non-rac)

I am going to install grid installation for non-rac using asm for two node sun cluster environment..
How to create candidate disk in solaris cluster (sparc os) to install grid home in asm.. please provide me the steps if anyone knows

Please refer the thread Re: 11GR2 ASM in non-rac node not starting... failing with error ORA-29701
and this doc http://docs.oracle.com/cd/E11882_01/install.112/e24616/presolar.htm#CHDHAAHE

Services in a two node installation

Similar Messages

Maybe you are looking for