Services in SAP management console and related window services and process

hai
can u please any one of you can send me the services in SAP management console and related window services(in adminstrator/services) and process in task manager.
thanks in advance.
Naga Laxmi

Hi Naga,
Please refer to this article for the processes relevant to the Java Instance:
http://help.sap.com/saphelp_nw04/helpdata/en/62/1bf03eae11e16be10000000a114084/frameset.htm
Except the processes of the Java instance you can find several processes of the IGS server and the ABAP disp+work processes.
You can easily find the relevant services by their SAP prefix.
Hope this helps.
Best Regards
Vyara

Similar Messages

SAP management console doesnt show any instances

Hi,
I installed CE recently and it seemed to be working fine. But today I have been running into trouble with the SAP management console. When I open the SAP management console it shows no instances and is empty. I tried to start the server from SAP Netweaver Composition Environment 7.1 > Application server J01 (CE1) > Start Application Server and it fails also giving me this message
===================================================
============== Starting System CE1 ================
===================================================
=============== Starting database instance ...
>>The requested service has already been started.
>>More help is available by typing NET HELPMSG 2182.
>>The MaxDB Database Starter, Version 7.6.02.09
>>Copyright 2000-2007 by SAP AG
>>OK
>>============== Starting central services instance ...
>>03.07.2007 10:28:20
>>Start
>>FAIL: The system cannot find the file specified., CreateFile failed in plugin_pi
>>pefopen()
>>03.07.2007 10:28:20
>>StartWait
>>FAIL: The system cannot find the file specified., CreateFile failed in plugin_pi
>>pefopen()
>>============== Start operation failed !
>>Press any key to continue . . .
And surprisingly I am not able to see any logs for today, The last I can view them for is when I tried to start the application yesterday.
I also tried to go through the composition tool set up again where it could lead me to a screen to start the server , but had no luck , it didnot give me any information about the CE instances at all.
Any help in this regard would be really appreciated it.
Thanks so much
Regards
Roopa

Hi Roopa,
Follow this...
Execute sapstartsrv.exe from one of the following paths
fill with your system details, select your START profile
from \usr\sap\<SID>\PROFILE\START*, use your Service user and password (your as <hostname>\SAPService<Sid>)
\usr\sap\<sid>\SYS\exe\uc\NTI386
\usr\sap\<SID>\SYS\exe\run
Now Check MMC
Thanks & Regards,
Venkat.
Reward points if useful

SAP Management Console and Services

Good morning everyone,
I am trying to understand more about the services used by the SAP System, the order in which they are / need to be started.
First I have a precise question regarding what appears to be, to me, as a discrepancy between the SAP Management Console and The Services Console.
At the moment I have a Server with the SAP System stopped. It shows the correct information in the SAP Management Console but when I look at the Services Console the following services show as started:
SAPOsCol, SAPPRD_00 & SAPPRD_01
SAPCCMSR.01 & SAPCCMSR.11 are set to manual
Has anyone got an explanation on why different info are displayed in both console?
Also, is there a way of checking if the SAP Services are running without going through any interface (Management Console)?
Finally,
In the Services Console the SAPOsCol, SAPPRD_00 & SAPPRD_01 services are set to automatic but when we restart the Server the services do not restart automatically even so they show as starter. Can anyone give me direction on what I need to check or change for these to start properly?
Thank you
Corinne

Corinne,
The Services SAPOsCol, SAPPRD_00 & SAPPRD_01 started doesnot mean that SAP is up. So even if you stop SAP through MMC it will show these services as started. These Services denote whether the Instance PRD_00 and PRD_01 are enabled in MMC. So if you stop these services, you wont be able to start SAP through MMC.
SAPCCMSR.01 & SAPCCMSR.11 are set to manual -- These are optional CCMS Agents , so they are set to manual. If you need them you can change them to Automatic
SAPOsCol, SAPPRD_00 & SAPPRD_01 are set to automatic. This should mean that they get strated with the start of OS during a reboot. If they are not getting started there is some issue.
Hope this helps!
Reward points if useful!!!
Cheers!
Bidwan

SAP Management Console : Error MMC cannot open the file "C:\WINDOWS\sapmmc.

Hi Experts,
We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAP

Hi,
Looks like your mmc dll is corrupted, with your install and uninstall of software.
Two Options:
1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
OR
2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
Hope this helps. points are welcome.
-K

Difference between SAP SLD and SAP Management console

Hello,
It seems that both System landscape directory and SAP management console have some overlapping features. The services can be started or stopped in both. Is it true? Does anyone know the difference between these 2 and where does Solution manager fit in?
Thanks
Shailik

Hi,
SAP SLD is the central information provider in a system landscape.this contains both Component information and Landscape description.COMPONENT Info in sense all the sap products and components along with their versions, And also third party products also.LANDSCAPE desc in sense the description of all the systems in particular landscape.
Example:This can shows exact idea for you.Components like CAF,Webdynpo(WD-java),BPM etc info.And the host names,Message server ports etc.Here we dont have start/stop functionality.
SAP MC provides a common framework for centralized system management. It allows you to monitor and perform basic administration tasks on the SAP system centrally, thus simplifying system administration. Using the SAP MC you can
1.Monitor and control (start, stop, or restart) the SAP system and its instances with a single tool
2.Monitor system alerts
3.Display the list of all access points to an SAP system etc.
We can see difference by looking into http://<host name>:<port>/index.html
Look and feel are also differ.
For more info you can go through these links of sap help.
For SAP SLD:http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/frameset.htm
For SAP MC:http://help.sap.com/saphelp_nwce10/helpdata/en/44/c707c053550f2ce10000000a1553f7/frameset.htm
Thanks,
Murthy.

Missing Instances in SAP Management Console

Hello,
After troubles with Deploy (error message occurs) I tried to restart the J2EE Engine with sapmmc, but it does not start correctly (not all icons are green). So I stopped the J2EE engine, rebooted my developer PC and afterwards the list in sapmmc is empty. I only can see "Console Root", "SAP Systems" on the left side and "There are no items to show in this view" on the right side.
Should I start any service manually?
sapstartsrv.exe
Error : Cannot install service.
CreateService failed: 421
The account name is invalid or does not exist, or the password is invalid for the account name specified.
STARTSAP name=dm0 nr=01 sapdiahost=sapserver (NO Change)
librfc32.dll and librfc32u.dll files are present in C:\WINDOWS\system32.
SAPLOC or SAPMNT folders are not available.
when SAPDM0_00 in services.msc started, after starting it automatically shuts down.
SAPOSCOL in services.msc is in started status only.
SAP MMC
1. Copy sapmmc.dll, sapmmcms.dll, sapmmcdb6.dll, sapmmcinf.dll, sapmmcada.dll, and sapstartsrv.exe to C:\Windows\system32
2. Check that librfc32.dll is available in C:\Windows\system32 (both librfc32.dll and librfc32u.dll are likely available if you have installed SAP GUI already) If not, copy from the SAR file.
3. Change directory
>cd C:\Windows\System32
4. Register DCOM Type library of the service
> sapstartsrv -t
Click on u201COKu201D in the following Window
5. Copy sapmmc.dll, sapmmcms.dll, sapmmcdb6.dll, sapmmcinf.dll, sapmmcada.dll, and sapstartsrv.exe to C:\Windows\system32
6. Check that librfc32.dll is available in C:\Windows\system32 (both librfc32.dll and librfc32u.dll are likely available if you have installed SAP GUI already) If not, copy from the SAR file.
7. Change directory
>cd C:\Windows\System32
8. Register DCOM Type library of the service
> sapstartsrv -t
Click on u201COKu201D in the following Window
9. Start mmc from DOS or Run
10. Click on menu "File" u2013 "Add/Remove Snap-in"
11. Click on "Add"
12. Select "SAP System Manager" then "Add"
13. Enable "Export user mode" option then click "Next"
14. click on "Next"
15. Type the system information <SID> as System and "<hostname> <instance number>" as Instance, then click on "Add". The entry should be displayed in the "Fixed instance list" window. Add more entries or Click on "Finish"
Right-click on SID and select start.
Error : Cannot connect to SAP Service on sapserver
WebService error:20
Unknown error
DCOM Interface error:80070424
The specified service does not exist as an installed service.
Server execution failed.
Please help me in solving the above issue.

Hi,
See note: 535532
Mid way through the note it says:
You can then register the SAP J2EE Engine as a windows-service by using the SAP J2EE Engine Config Tool. Open a command prompt and change to the directory <J2EE Engine installation directory>configtool and run configtool.bat or start this tool via your Start-Menu "Tools->Config Tool" of the J2EE Server entry. Select at the left navigation area of this tool the entry "cluster/ server" the checkbox "Enabled" at the tabstrip "NT Service". Apply these settings by clicking on "File->Apply" at the menu. Do the same with the entry "cluster / dispatcher".
After you have finished these steps you can register now the J2EE Engine as a windows service.
Start service.exe, which is also located in the directory
<J2EE Engine installation directory>configtool. It works with three
parameters:
Service.exe u2013install u2013 the service(s) is (are) registered as NT/2000 Service(s). For each specified cluster node, a separate service is generated. All services have startup mode automatic. To start the service(s), open the Control Panel ¨Services folder. Find the service in the list of available services (for example: SAP J2EE Server 1, SAP J2EE Dispatcher 1, SAP J2EE Server 2, and so on). Select it, and choose u201CStartu201D on the right-hand side. No u201CStartup Parametersu201D are needed for the service to run. The system starts the particular J2EE Engine 6.20 node in background mode. It can be used and administered as usual. The only difference is that the server does not run in a console window.
There may be other notes along these lines.
You should also check any notes on the setup of SAP in MSCS cluster, as it will contain instructions for registering the services.
Hope this gives you a pointer in the right direction.

Problem with SAP Management console 'yellow is not changing to green'

Hi
I am starting my SAP Server from SAP Management console( ECC6.0 IDES Version).
I am able to login into my system but after few minutes the server color is changing from Green to Yellow and I am not able to continue using my system. What could be the problem? How to resolve the same?
I also tried Some suggestions posted before by using cmd ....Please help me out in a step by step manner.
Thanks.

trc file: "dev_w0", trc level: 1, release: "700"
* ACTIVE TRACE LEVEL           1
* ACTIVE TRACE COMPONENTS      all, MJ
B
B Wed Aug 27 21:12:36 2014
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ECC\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\ECC\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ECC\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73)
B New connection 0 created
M sysno      00
M sid        ECC
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    75
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        2900
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2900) [dpxxdisp.c   1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Wed Aug 27 21:12:37 2014
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05D30040, size: 4653368)
M DpShMCreate: allocated sys_adm at 05D30040
M DpShMCreate: allocated wp_adm at 05D31E40
M DpShMCreate: allocated tm_adm_list at 05D365C0
M DpShMCreate: allocated tm_adm at 05D365F0
M DpShMCreate: allocated wp_ca_adm at 06105890
M DpShMCreate: allocated appc_ca_adm at 0610B650
M DpShMCreate: allocated comm_adm at 0610D590
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0618E450
M DpShMCreate: allocated gw_adm at 0618E490
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0618E4C0
M DpShMCreate: allocated wall_adm at 0618E4C8
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 27 21:12:38 2014
M ThInit: running on host gcecc62
M
M Wed Aug 27 21:12:39 2014
M calling db_connect ...
C Prepending D:\usr\sap\ECC\DVEBMGS00\exe to Path.
C
C Wed Aug 27 21:12:40 2014
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ECC on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   062FC018   063015B4   06300E3C
C Attaching to DB Server ECC (con_hdl=0,svchp=06300D88,svrhp=06310694)
C Starting user session (con_hdl=0,svchp=06300D88,srvhp=06310694,usrhp=06322CB8)
C
C Wed Aug 27 21:12:41 2014
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      4391]
C Detaching from DB Server (con_hdl=0,svchp=06300D88,srvhp=06310694)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@ECC on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   062FC018   063015B4   06300E3C
C Attaching to DB Server ECC (con_hdl=0,svchp=06300D88,svrhp=06310694)
C Starting user session (con_hdl=0,svchp=06300D88,srvhp=06310694,usrhp=06322CB8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c      4391]
C Detaching from DB Server (con_hdl=0,svchp=06300D88,srvhp=06310694)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c    10933]
B
B Wed Aug 27 21:12:42 2014
B ***LOG BV3=> severe db error 1033      ; work process is stopped [dbsh#2 @ 1199] [dbsh    1199 ]
B ***LOG BY2=> sql error 1033   performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10156]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = V-1
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server gcecc62_ECC_00 on host gcecc62 (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Wed Aug 27 21:12:42 2014
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10354
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2900) [dpnttool.c   327]
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        ECC
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    75
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2528
Wed Aug 27 21:12:30 2014
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2528) [dpxxdisp.c   1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Aug 27 21:12:35 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc62_ECC_00                          <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05D30040, size: 4653368)
DpShMCreate: allocated sys_adm at 05D30040
DpShMCreate: allocated wp_adm at 05D31E40
DpShMCreate: allocated tm_adm_list at 05D365C0
DpShMCreate: allocated tm_adm at 05D365F0
DpShMCreate: allocated wp_ca_adm at 06105890
DpShMCreate: allocated appc_ca_adm at 0610B650
DpShMCreate: allocated comm_adm at 0610D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0618E450
DpShMCreate: allocated gw_adm at 0618E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0618E4C0
DpShMCreate: allocated wall_adm at 0618E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
Wed Aug 27 21:12:36 2014
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1623]
***LOG Q0K=> DpMsAttach, mscon ( gcecc62) [dpxxdisp.c   11586]
DpStartStopMsg: send start message (myname is >gcecc62_ECC_00                          <)
DpStartStopMsg: start msg sent
Wed Aug 27 21:12:37 2014
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Wed Aug 27 21:12:38 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Wed Aug 27 21:13:17 2014
*** ERROR => W0 (pid 2900) died [dpxxdisp.c   14241]
*** ERROR => W1 (pid 1548) died [dpxxdisp.c   14241]
*** ERROR => W2 (pid 2908) died [dpxxdisp.c   14241]
*** ERROR => W3 (pid 2920) died [dpxxdisp.c   14241]
*** ERROR => W4 (pid 2924) died [dpxxdisp.c   14241]
*** ERROR => W5 (pid 1944) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => W6 (pid 2936) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbe --> 0xbc
*** ERROR => W7 (pid 2944) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbc --> 0xb8
*** ERROR => W8 (pid 2952) died [dpxxdisp.c   14241]
*** ERROR => W9 (pid 2960) died [dpxxdisp.c   14241]
*** ERROR => W10 (pid 2968) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb8 --> 0xb0
*** ERROR => W11 (pid 2972) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb0 --> 0xa0
*** ERROR => W12 (pid 2980) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:27 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Aug 27 15:43:27 2014
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA     2900 Ended         no      1   0             0
1 DIA     1548 Ended         no      1   0             0
2 DIA     2908 Ended         no      1   0             0
3 DIA     2920 Ended         no      1   0             0
4 DIA     2924 Ended         no      1   0             0
5 DIA     1944 Ended         no      1   0             0
6 UPD     2936 Ended         no      1   0             0
7 ENQ     2944 Ended         no      1   0             0
8 BTC     2952 Ended         no      1   0             0
9 BTC     2960 Ended         no      1   0             0
10 BTC     2968 Ended         no      1   0             0
11 SPO     2972 Ended         no      1   0             0
12 UP2     2980 Ended         no      1   0             0
Dispatcher Queue Statistics Wed Aug 27 15:43:27 2014
===========================
+------+--------+--------+--------+--------+--------+
| Typ |    now |   high |    max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP |      0 |      2 |   2000 |      5 |      5 |
+------+--------+--------+--------+--------+--------+
| DIA |      5 |      5 |   2000 |      5 |      0 |
+------+--------+--------+--------+--------+--------+
| UPD |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| ENQ |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| BTC |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| SPO |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| UP2 |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events       total     8, udp     6 ( 75%), shm     2 ( 25%)
since last update total     8, udp     6 ( 75%), shm     2 ( 25%)
Dump of tm_adm structure: Wed Aug 27 15:43:27 2014
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks Wed Aug 27 15:43:27 2014
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
|   id | owner        |   pid    | eyecatcher |
+------+--------------+----------+-------------+
|    0 | DISPATCHER   |       -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:32 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc62_ECC_00                          < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2884) (SOFT_KILL)
Stop icman
killing process (2892) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2884 HANDLE:1596)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:33 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2884 HANDLE:1596)
wait for end of icman
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:34 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:35 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:36 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:37 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:38 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:39 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:40 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:41 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:42 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:43 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:44 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2892 HANDLE:1600)
DpStartStopMsg: send stop message (myname is >gcecc62_ECC_00                          <)
NiIMyHostName: hostname = 'gcecc62'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Aug 27 21:13:45 2014
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1536 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1536 (pos=2)
SiSelNRemove: removed sock 1536
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1536
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2528) [dpxxdisp.c   10259]
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        ECC
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    75
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2528
Wed Aug 27 21:12:30 2014
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2528) [dpxxdisp.c   1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Aug 27 21:12:35 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc62_ECC_00                          <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05D30040, size: 4653368)
DpShMCreate: allocated sys_adm at 05D30040
DpShMCreate: allocated wp_adm at 05D31E40
DpShMCreate: allocated tm_adm_list at 05D365C0
DpShMCreate: allocated tm_adm at 05D365F0
DpShMCreate: allocated wp_ca_adm at 06105890
DpShMCreate: allocated appc_ca_adm at 0610B650
DpShMCreate: allocated comm_adm at 0610D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0618E450
DpShMCreate: allocated gw_adm at 0618E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0618E4C0
DpShMCreate: allocated wall_adm at 0618E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
Wed Aug 27 21:12:36 2014
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1623]
***LOG Q0K=> DpMsAttach, mscon ( gcecc62) [dpxxdisp.c   11586]
DpStartStopMsg: send start message (myname is >gcecc62_ECC_00                          <)
DpStartStopMsg: start msg sent
Wed Aug 27 21:12:37 2014
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Wed Aug 27 21:12:38 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Wed Aug 27 21:13:17 2014
*** ERROR => W0 (pid 2900) died [dpxxdisp.c   14241]
*** ERROR => W1 (pid 1548) died [dpxxdisp.c   14241]
*** ERROR => W2 (pid 2908) died [dpxxdisp.c   14241]
*** ERROR => W3 (pid 2920) died [dpxxdisp.c   14241]
*** ERROR => W4 (pid 2924) died [dpxxdisp.c   14241]
*** ERROR => W5 (pid 1944) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => W6 (pid 2936) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbe --> 0xbc
*** ERROR => W7 (pid 2944) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbc --> 0xb8
*** ERROR => W8 (pid 2952) died [dpxxdisp.c   14241]
*** ERROR => W9 (pid 2960) died [dpxxdisp.c   14241]
*** ERROR => W10 (pid 2968) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb8 --> 0xb0
*** ERROR => W11 (pid 2972) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb0 --> 0xa0
*** ERROR => W12 (pid 2980) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:27 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Aug 27 15:43:27 2014
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA     2900 Ended         no      1   0             0
1 DIA     1548 Ended         no      1   0             0
2 DIA     2908 Ended         no      1   0             0
3 DIA     2920 Ended         no      1   0             0
4 DIA     2924 Ended         no      1   0             0
5 DIA     1944 Ended         no      1   0             0
6 UPD     2936 Ended         no      1   0             0
7 ENQ     2944 Ended         no      1   0             0
8 BTC     2952 Ended         no      1   0             0
9 BTC     2960 Ended         no      1   0             0
10 BTC     2968 Ended         no      1   0             0
11 SPO     2972 Ended         no      1   0             0
12 UP2     2980 Ended         no      1   0             0
Dispatcher Queue Statistics Wed Aug 27 15:43:27 2014
===========================
+------+--------+--------+--------+--------+--------+
| Typ |    now |   high |    max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP |      0 |      2 |   2000 |      5 |      5 |
+------+--------+--------+--------+--------+--------+
| DIA |      5 |      5 |   2000 |      5 |      0 |
+------+--------+--------+--------+--------+--------+
| UPD |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| ENQ |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| BTC |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| SPO |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| UP2 |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events       total     8, udp     6 ( 75%), shm     2 ( 25%)
since last update total     8, udp     6 ( 75%), shm     2 ( 25%)
Dump of tm_adm structure: Wed Aug 27 15:43:27 2014
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks Wed Aug 27 15:43:27 2014
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
|   id | owner        |   pid    | eyecatcher |
+------+--------------+----------+-------------+
|    0 | DISPATCHER   |       -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:32 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc62_ECC_00                          < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2884) (SOFT_KILL)
Stop icman
killing process (2892) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2884 HANDLE:1596)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:33 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2884 HANDLE:1596)
wait for end of icman
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:34 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:35 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:36 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:37 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:38 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:39 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:40 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:41 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:42 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:43 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2892 HANDLE:1600)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Aug 27 21:13:44 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2892 HANDLE:1600)
DpStartStopMsg: send stop message (myname is >gcecc62_ECC_00                          <)
NiIMyHostName: hostname = 'gcecc62'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Aug 27 21:13:45 2014
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1536 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1536 (pos=2)
SiSelNRemove: removed sock 1536
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1536
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2528) [dpxxdisp.c   10259]
Good Bye .....
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2524] Wed Aug 27 21:12:28 2014
[Thr 2524] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    73
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2516
[Thr 2524] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2516) [msxxserv.c   1824]
[Thr 2524] Wed Aug 27 21:12:29 2014
[Thr 2524] load acl file = D:\usr\sap\ECC\SYS\global\ms_acl_info.DAT
[Thr 2524] MsGetOwnIpAddr: my host addresses are :
[Thr 2524]   1 : [192.168.10.1] gcecc62 (HOSTNAME)
[Thr 2524]   2 : [127.0.0.1] gcecc62 (LOCALHOST)
[Thr 2524]   3 : [192.168.10.11] gcecc62 (NILIST)
[Thr 2524] MsHttpInit: full qualified hostname = gcecc62
[Thr 2524] HTTP logging is switch off
[Thr 2524] set HTTP state to LISTEN
[Thr 2524] ms/icf_info_server : deleted
[Thr 2524] *** I listen to port sapmsECC (3600) ***
[Thr 2524] *** I listen to internal port 3900 (3900) ***
[Thr 2524] *** HTTP port 8100 state LISTEN ***
[Thr 2524] CUSTOMER KEY: >Z0250905160<
[Thr 2524] Wed Aug 27 21:13:44 2014
[Thr 2524] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from gcecc62_ECC_00 [msxxserv.c   4679]

SAP Management Console : Error : MMC cannot open the file

We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAP

Hi Alin,
Thanks for your reply, we have deleted only folders
- SAP xMII 11.5
- SAP xMII CMS 11.5
- SAP xMII Security 11.5
- Microsoft SQL Server folder
from control panel --> add and remove folder, when we were deleting these folders, IIS services were stopped by the system. After deleting the same we faced this problem.
Regards,
Study SAP

Cannot start BW or HANA instances in SAP Management console

Hi,
I created instance of "SAP Business Warehouse 7.4 SP5 incl. SAP Business Objects BI 4.1 SP2 on SAP HANA 1.0 SP7". When I'm trying to start SAP BW or SAP HANA instances in "SAP Management console" via remote desktop connection I receive an error message :
"WebService error: 21 The operation timed out" / "The RPC server in unavailable".
Any ideas how to fix this?

Hi,
See note: 535532
Mid way through the note it says:
You can then register the SAP J2EE Engine as a windows-service by using the SAP J2EE Engine Config Tool. Open a command prompt and change to the directory <J2EE Engine installation directory>configtool and run configtool.bat or start this tool via your Start-Menu "Tools->Config Tool" of the J2EE Server entry. Select at the left navigation area of this tool the entry "cluster/ server" the checkbox "Enabled" at the tabstrip "NT Service". Apply these settings by clicking on "File->Apply" at the menu. Do the same with the entry "cluster / dispatcher".
After you have finished these steps you can register now the J2EE Engine as a windows service.
Start service.exe, which is also located in the directory
<J2EE Engine installation directory>configtool. It works with three
parameters:
Service.exe u2013install u2013 the service(s) is (are) registered as NT/2000 Service(s). For each specified cluster node, a separate service is generated. All services have startup mode automatic. To start the service(s), open the Control Panel ¨Services folder. Find the service in the list of available services (for example: SAP J2EE Server 1, SAP J2EE Dispatcher 1, SAP J2EE Server 2, and so on). Select it, and choose u201CStartu201D on the right-hand side. No u201CStartup Parametersu201D are needed for the service to run. The system starts the particular J2EE Engine 6.20 node in background mode. It can be used and administered as usual. The only difference is that the server does not run in a console window.
There may be other notes along these lines.
You should also check any notes on the setup of SAP in MSCS cluster, as it will contain instructions for registering the services.
Hope this gives you a pointer in the right direction.

SAP management console not showing AS java

Hello all,
I have made a NW04s installation system test (linux+oracle). I then installed as java add-in EP and BI (AS JAVA, EP CORE, EP, BI JAVA). It was NW04s SR2 with SPC13 and kernel not changed: 700 patch 111.
In the SAP management console there were 3 entries: one for database, one for abap instance and one for java instance.
In the abap instance node I was able to see an entry for "AS java" which was whowing two process (SDM and another one...).
I made a new test installation similar to the previous one and in the SAP management console I do not see any entry for "AS Java". Of course AS java is installed and running !
How can I get SAP management console show "AS java" ????
Thank you
Jean

Hi Jean,
Start Services.msc from run prompt (if this is windows based installation)
and look for <SID>services, where <SID> is your instance name..
Please do the following and let me know if this of any success
You get back your MMC , please do the following steps.
1. Go to Run and type MMC.
2.Go to file and select add/remove snap in ( alt+m).
3.Click on add
4.Select the SAP system from there.
Save the MMC console which you have created now....This should work fine.
Thanks
Pankaj

SAP Management console SID missing

Hi,
After restart the operating system, SAP SID is missing in SAP Management console.
Below are the details and steps I tried,
1. Starting the SAP System from the command line u2013 I got the following
message u201CSTARTSAP Continues u2026u201D
2. Oracle is up and running (Can able to start and stop oracle )
3. R3trans -d return code is "000"
4. Installed latest SAP Managent console from "SAP MMC 7.20 -> Windows Server on IA32 32bit"
6. Downloaded and install "NTSCMGR" from "Note 618053 - Download Location for NTSCMGR.EXE".
7. I have checked these note:: 82751 and 0000142100.
When i try adding servie using sapstartsrv.exe -t under /usr/sap/<SID>/SYS/exe/uc/NT1386 am getting the below message
"Cannot install service
Create Service failed:421
The acount name is invalid or does not exist, or the password is invalid for the account name specified"
Please advice on below points,
1. How to add a SAP service in services.msc (SAP<SID>_<NR>)
2. What I have to do bring back the instance in the SAPMMC and continue with my old configuration
System Environment :: This is 32bit IDES server (ECC 6.0 / Oracle 10g) sits in windows server 2k3 service pack 2
Thanks, Ganesh

Hi Orkun,
Please see th output below
E:\WINDOWS\system32>netstat -a
Active Connections
Proto Local Address          Foreign Address        State
TCP    saptest:1031            saptest:1032            ESTABLISHED
TCP    saptest:1032            saptest:1031            ESTABLISHED
TCP    saptest:1424            saptest:1425            ESTABLISHED
TCP    saptest:1425            saptest:1424            ESTABLISHED
TCP    saptest:1426            saptest:5939            ESTABLISHED
TCP    saptest:5939            saptest:1426            ESTABLISHED
E:\WINDOWS\system32>netstat -a -o
Active Connections
Proto Local Address          Foreign Address        State           PID
TCP    saptest:http            saptest:0               LISTENING       1420
TCP    saptest:epmap           saptest:0               LISTENING       680
TCP    saptest:https           saptest:0               LISTENING       1420
TCP    saptest:microsoft-ds    saptest:0               LISTENING       4
TCP    saptest:1025            saptest:0               LISTENING       432
TCP    saptest:1527            saptest:0               LISTENING       1228
TCP    saptest:5938            saptest:0               LISTENING       1420
TCP    saptest:50113           saptest:0               LISTENING       3036
TCP    saptest:netbios-ssn     saptest:0               LISTENING       4
TCP    saptest:1026            saptest:0               LISTENING       1228
TCP    saptest:1031            saptest:1032            ESTABLISHED     1420
TCP    saptest:1032            saptest:1031            ESTABLISHED     1420
TCP    saptest:1424            saptest:1425            ESTABLISHED     2804
TCP    saptest:1425            saptest:1424            ESTABLISHED     2804
TCP    saptest:1426            saptest:5939            ESTABLISHED     2804
TCP    saptest:5939            saptest:0               LISTENING       1420
TCP    saptest:5939            saptest:1426            ESTABLISHED     1420
UDP    saptest:microsoft-ds    :                                    4
UDP    saptest:isakmp          :                                    432
UDP    saptest:ipsec-msft      :                                    432
UDP    saptest:ntp             :                                    792
UDP    saptest:netbios-ns      :                                    4
UDP    saptest:netbios-dgm     :                                    4
UDP    saptest:ntp             :                                    792
UDP    saptest:1030            :                                    792
Thanks

Restarting J2EE server nodes from Developer Studio Vs SAP Management Consol

Hi,
What makes the difference between restarting server nodes from Dev Studio and SAP Management console.
Please let me know if any documents related to this.
Thanks

Thanks for your quick reply.
I observed that options for restarting services from Dev Studio are disabled.
Could you please let me know where we need to configure to enable these options when right click on server instances.
Thanks

Unable to find SAP Server in SAP Management Console

Hi
I installed NSP Server in my Windows XP i used to work on this system.
I downloaded 90days licence from SAP site and it is valid upto 20060701.
Today we i try to start NSP Server using SAP Management Console there is server appearing in the tree which is usually appear in left panel.
Could any body help me how retrive the Server in SAP Management Console
Thanks
Uma

Hi uma
check the following service is running under windows service manager.
control panel->Administrative tool ->services
find the following service
sapnsp_instance number.
this service might be stop. start it.
also check the logon information for service.
now check the sap MMC.
regards,
kaushal

PI 7.1 Installation - SAP Management Console

Hi Experts,
May I ask how I can restore the list under the SAP Systems in the SAP Management Console?
I have just restarted the system and the list is gone and I can no longer log-in to the server using sap logon.
The PI is installed in windows 2003. Do you think reinstalling PI can fix this?
Your advise is very much appreciated.
Thanks!
Regards,
Lex

hi sekhar,
thanks for the info.
i found this one...
Hi
Go to service.msc from run window.Look for the below mentioned services:
1-> SAP<SID>_<NO>
Right click on the service and click on properties.Click on Logon tab. Click on Browse and look for "SAPService<sid> and type the password of SAPService<sid> that has been assigned during the installation.You need to repeat the password.Log off and login <sid>adm. Now SAP MMC console should come up with the tree
Regards,
Satish
and it fixed it!!
regards,
lex

Error in starting SAP Systems at SAP Management Console

Hi,
I have received the following error messages , after installed the "SAP NetWeaver Composition Environment 7.1 sp1" run SAP management Console->SAP Systems-> start .
after that ,the system ask me to logon on for webservice authentication,then i write my os user and password,but the system deny me,and the error follow as:
error messages:
Start failed:2
Permission denied
I need help,
best regards

Hi
You need to logon as <sid>adm and provide the password... if you try to start the service with a user without auth you'll get permission denied.
User must be <sid>adm or a member of the Local or Domain Administrators
Regards
Juan

Services in SAP management console and related window services and process

Similar Messages

Maybe you are looking for