Services in transaction sicf failing with Internal Error 500

Hi all,
When I try to test a service in transaction sicf, by right clicking on it and saying Test service.
I am getting an error "HTTP 500 Internal Server Error". All the services are running fine in
smicm.
The version of SAP is ECC 5.0(only ABAP Stack), Oracle, Windows.
This happens for all the services.
Any help would be greatly appreciated.
Thanks,
Vishi

Hi Sharath,
I have selected all of them, clicked on publish, the I got a message saying "choose an ITS for publishing"
Using the message in performance assistant,
In se80, Utilities->settings, On the ITS tab under Publish choose the ITS server,
However, here the only options are
1. on all defined sites,
2. on selected site, print
3. to local directory.
Here, I have selected on all defined sites.
Got the message "Object published successfully; site All Defined Sites"
How to proceed further?
Thanks,
Vishi
Edited by: sap.technical on Mar 9, 2010 6:15 AM

Similar Messages

Installation fails with "internal error 2502"

I have a client running Windows Vista Home Premium Edition (32 bit) and my app's CVI-built installer fails with "Internal Error 2502".
This installation kit has been successfully deployed on hundreds of computers with various versions of Windows and I have never seen this one. No device drivers or advanced libraries - just the standard runtime. I use CVI 9.0.1.
Searches reveal very little - some old issues with Office installation, date/time settings etc. but I have yet to find anything that indicates what this error represents.
Any insights or ideas very welcome.
Thanks,
Ian
Solved!
Go to Solution.

That appears to be a Windows Installer (MSI) error, and can have many different causes. Can you confirm that anyWindows installers (perhaps try newest Adobe Reader) work on that system? Is the system's date/time set correctly? Could there be a permissions restriction with C:\Windows\system32 or C:\Programs\National Instruments\Shared?
I'd also try doing an internet search for "installer error 2502" and see what other tips you might find. If all else fails, try running the installer from the command line like this:
setup.exe /log install_log.txt
That will generate a log file that might contain a hint for us.
Mert A.
National Instruments

VM creation on a cluster fails with Internal error code: 0x80990C1D

I am getting the following error when creating a VM from template on a 2012 R2 cluster:
Error (3101)
VMM failed to mount virtual hard disk (VHD) file XXXX.vhdx on the XXXX server. A timeout occurred.
Internal error code: 0x80990C1D
Recommended Action
Open Services to make sure the startup type for Virtual Disk service is set to manual or automatic. Ensure that the service can start and then try the operation again.
The errer occurs while running "Install VM Components" task. I did check services on the host and all is running as expected. The same template works without problem on non-clustered hosts, but fails two out of three times on HV cluster with
CSV storage on FC SAN. I am running SCVMM 2012 R2 UR3.
Any ideas what may cause this issue?
Thanks
Gleb.

Hi,
it's a strentgh issue. I don't have any certain information on the hand but I am just thinking out loud now. Maybe it helps.
If it fails at "Install VM Components" this would mean that the problem occurs during injecting or ejecting the integration services. I am right now not sure if VMM injects the integration services as an ISO file or as an vhd file. The second option is also
possible.
From this point of view my question would be;
1) Are you creating the VM from a blank disk with an ISO OS file attached ? If yes
2) Are you experienceing the same problem with an syspreped vhd or vhdx file too ?
3) How many VM's are running on your Cluster Nodes ?
4) Are there any differences in the behavior when you select a different cluster node as destination host during the creation of a VM from template ?
5) What's the workload on your cluster nodes right now disk, memory, cpu ?
Regards,
Cengiz Kuskaya

CUCM 8.6.1 Refresh upgrade to 10.5 fails with Internal Error (Function: ipmReadNormalizedInputLine) [SOLVED]

Hi,
we are upgrading our CUCM 8.6.1 to 10.5.1 on VMWare Enviroment (vSphere 5.5 running on UCS).
We are running this upgrade in a sandbox, in order to avoid any problem in the production cluster.
We followed the refresh upgrade guide ( http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100.pdf)
Pre-configuration steps
Take a clone of the running publisher and put it in the sandbox
Remove DNS servers (they are not available in the sandbox)
Change the NTP Server with a ntp that is recheable from the sandbox
Check that Gateway and NTP connectivity are OK for the CUCM
Pre-upgrade:
Run the cop files to update keys and increase disk space (log partition is 80% full)
Shutdown the CUCM VM and
Increase disk space on the VM configuration
change VM OS from RedHat5 (32bit) to RedHat 6 (64bits)
change VM nic from flexible to VMNIX3
Restart the VM
Upgrade
1. mount the iso
2. connect to OS Administration web interface and perform the Software installation from CD/DVD
3. upgrade process works fine up to the post-installation task
During post-installation tasks (after completing the DB Load and Transforming Copy) the Upgrade process always fails fails with an internal error
IPM|Internal Error, File:ipm.c:2011, Function: ipmReadNormalizedInputLine(), "/usr/local/cm/script/cm-dbl-install RU PostInstall 10.5.1.10000-7 8.6.1.21019-1 /usr/local/cm/ /common/component/database /common/log/install/capture.txt " failed (1)|<LVL::Critical>
IPM| end-of-session "Installing database component": 1109.369 secs.|<LVL::Info>
IPM|Close progress meter "Component Install"|<LVL::Info>
We also tried the intermediate steps:
- upgrade from 8.6.1 to 9.1 : worked
- from 9.1 to 10.5: Failed with the same error
- from 9.1 to 10.1: Failed with the same error
any help will be greatly appreciated, thanks
Stefano

Issue was related to Dial Plans, the logs showed
16:45:46.204 |   DBUtil::BlockCopyTable ### *ERROR* ###: (diagnosis): Bulk Data Migration for table availdialplan failed due to data constraint issue, (-971).
16:45:46.611 |   DBUtil::BlockCopyTable *
16:46:16.555 |*ERROR* Error fetching column information: [Informix][Informix ODBC Driver][Informix]Could not position within a table (informix.systables).
16:46:16.588 |   DataConverter_5to6::CopyTables *ERROR* BlockCopyTable failed to process table (availdialplan)
16:47:52.395 |   installFull *ERROR* Prior Cancel or Error Processing convert5to6()
Cisco TAC fixed by updating the primary key in the DB.
After the fix we were able to perform the RU as expected.

Fingerprint reader failing with internal error - 0x800106BB

My fingerprint reader worked once I put the proper software in. But only once. The second time I tried to get in, I got the following: "An internal error occurred (bpwb: bp-wb-dpi-ed-wbeba (800106BB)" When I went onto the internet and searched on that error, it appears to be a known problem with Windows 7 (fixed in win8) with the following description: "Not enough RPC threads". Is this a hardware problem or a software problem? Lenovo is telling me to return my Thinkpad E540 to be fixed. Since I am going on a cruise in 20 days and planned to bring this laptop with me, I'm concerned.

Hi Sharath,
I have selected all of them, clicked on publish, the I got a message saying "choose an ITS for publishing"
Using the message in performance assistant,
In se80, Utilities->settings, On the ITS tab under Publish choose the ITS server,
However, here the only options are
1. on all defined sites,
2. on selected site, print
3. to local directory.
Here, I have selected on all defined sites.
Got the message "Object published successfully; site All Defined Sites"
How to proceed further?
Thanks,
Vishi
Edited by: sap.technical on Mar 9, 2010 6:15 AM

Copy Express Fails with "Internal Error (-5002) Occurred"

Hello experts:
I have SAP B1 Version 8.8, PL16.
I have two users I want to add from the old database to the new database. It works fine for one and the second one has a failure with the above error statement. I cannot figure out why the two users are creating different results. All I am doing is adding two users...
EDIT: I did see that the successful user which was brought over is a Superuser and the other one was not - the only difference between them...
Of course I have searched the forum and -5002 seems to have to do with DTW, ,but nothing on Copy Express...anyone know why this is happening???
What great error messages we have - they make so much sense!!!
Many Thanks in Advance and Regards - Zal
Edited by: Zal Parchem on Mar 25, 2011 5:04 PM

Hello Julie...thanks for doing that. I did the exact same thing and it just ended up "wasting" away with no response from SAP. They could not figure out themselves...and they moved the priority down to "low" (which is the kiss of death in any inquiry)...
So, I think it ends up as this whole conversation has already centered around - namely, error messages and absolutely no explanation as to what those error messages mean. LOL - like I could have ever gotten away with this while I was in development: throw out an error message and not give any of the Users exactly what the error messages mean or what they need to do to resolve the situation!!! Sloppy, sloppy, sloppy is the bottom line...
I have used Copy Express since this and have had similar experiences with error messages - it just gets down to "do as much as you can with Copy Express and then manually enter the information" - what a waste of time, especially when you consider this could be such a great tool with the proliferation of integrated systems!!!
Gook luck finding out and hopefully something comes of it...
Regards - Zal

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)
I followed Technet articles to configure SiteMailBoxes in our environment & exchange sever.
When we created Sitemailbox in a SiteCollection &when we try to open it, it failed with below error.
Site Mailbox
We are having trouble connecting to Exchange Server
The server might be temporarily unavailable. Please check back on this page in a few minutes. If this problem persists, please contact your system administrator.
Correlation ID: bb0fe99c-6f4e-e084-b191-881fbf0fa977, Error Code 10
ULS Log (503 error)
Autodiscover Diagnostics Response Headers: request-id: 95d12ceb-283e-4495-b28b-256503fd097c client-request-id: 742fe69c-ef5a-e084-ca05-6098c759c584 X-CalculatedBETarget: devapwxyz01a.devap.mydomain.com X-FEServer: DEVNAABCD01B
Content-Length: 0 Cache-Control: private Date: Tue, 03 Feb 2015 18:53:40 GMT Set-Cookie: X-BackEndCookie=; expires=Sun, 03-Feb-1985 18:53:40 GMT; path=/autodiscover; secure; HttpOnly Server: Microsoft-IIS/8.5 X-AspNet-Version:
4.0.30319 X-Powered-By: ASP.NET
742fe69c-ef5a-e084-ca05-6098c759c584
if I am correct, X-CalculatedBETarget supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com. Do you guys have any idea on this? (I verified
the same using fiddler, it is failing right at autodiscover.svc call.)
I wrote a powershell script to connect autodiscover service in sharepoint server & this web service call able connect right server X-CalculatedBETarget. It gave the expected response.
I am not sure why SharePoint webservice call (X-CalculatedBETarget) is going to different server?
let me know if you guys have any ideas.
Thanks.

Thanks for the Response Raj.
I already followed the same instructions in the Links.
When SharePoint Autodisover.svc webservice send a request to Exchange server & Exchange server redirecting that request to different server, this is the problem i am facing right now.
X-CalculatedBETarget
supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com.
Let me know if you have any suggestions?

Synthetic Transactions Fail with TLS error

Hi,
Most of the test-cs cmdlets fail with the error: The operation failed due to issues with Tls. See the exception for more information.
Inner Exception:CertificateInfoNative::AcquireCredentialsHandle() failed; HRESULT=-2146893043.
Lync itself is working fine.
Any thoughts?

Hi,
Are you trying this command via remote power shell which is not exactly the lync server, if this is the case then with which user are you logged in, does this user have required permissions. also have a look in to this.
http://social.msdn.microsoft.com/Forums/en-US/ucmanagedsdk/thread/ca0d7758-d51b-4728-be0f-ae2c222546eb and
http://blog.greenl.ee/2009/03/25/troubleshooting-tlsexception-in-ucma-2-0-applications/
If answer is helpful, please hit the green arrow on the left, or mark as answer. Salahuddin | Blogs:http://salahuddinkhatri.wordpress.com | MCITP Microsoft Lync

CRM 2015 Update 0.1 Install Fails with SQL Error

Hi, anyone managed to install CRM 2015 Update 0.1?
The software installed fine but the DB updates fail with a SQL error. Just want to know if this is just my issue or if MS have a bug in the update. This is the SQL error:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Data.SqlClient.SqlException: The current transaction cannot be committed and cannot support operations that write to the log file. Roll
back the transaction.
Uncommittable transaction is detected at the end of the batch. The transaction is rolled back.
All of the ORGs fail with this error, even when I try to apply the DB update via Deployment manager. I've had to back out the rollup.

The issue appears when the update process creates the index cndx_BusinessDataLocalizedLabel. This is a known cause which is under investigation internally. Currently it seems to plan to release in CRM 2015 SP1

In Runtime Workbench the messages fails with the error

Hi,
Os : Sun Solaris
Database: oracle
Sap: XI 7.0
In Runtime Workbench the messages fails with the following error:
2007-09-28 15:46:38 Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.lang.NullPointerException.
system messages fails with following Error Message:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>503</SAP:P1>
<SAP:P2>Service Unavailable</SAP:P2>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 503 with the description Service Unavailable Error while sending by HTTP (error code: 503, error text: Service Unavailable)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Appreciate the response.
Thanks,
Sri.

Hi,
1)Check your J2EEs server is up
2)Check the adapter engine/status in RWB
The might help
1) 503 service unavailable
2) Note-803145
Regards
Agasthuri Doss

Is my HD Dead? Reformat Disk Utility Error: secure disk erase failed with the error could not open disk.

Hi,
Fed up with seeing the spinning beach ball I decided to reformat my MacBook Pro...
After backing up everything on an external hard drive I put in the OSX install DVD, restarted the machine and held down 'C'.
I followed the install prcedure, clicking next a few times etc...
I then went into Utilities > Disk Utility. I chose 7-Pass to erase the Macintosh HD and set it off erasing.
I checked the process an hour in and message on screen read:
Secure disk erase failed with the error:
could not open disk
The internal hard drive no longer exists in the disk utility so I cant retry erasing it.
The only thing that appears in disk utility is the OSX install DVD.
I can't even shut down the mac as everything under the apple tab is greyed out!
I'm guessing this means my hard drive is broken right?
If anyone has any other ideas of what to try I'd really appreciate that.
How do I turn the machine off?
If my hard drive is gone then should I consider getting an SSD drive?
Any recommendations for such a drive would be great.
Hope you can help!

Did you partition the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
  Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
  If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

Transfer ID failed with LUM errors

I have 4 netware servers to migrate to OES2. One was completed successfully using Transfer id a few weeks ago. This weekend I attempted another.
The last part of the transfer id failed with LUM errors that it couldnt access lum objects admingroup, www etc. As we have had one successful migration these objects do exist in the tree and are lum enabled. The /etc/nam.conf was modified prior to starting the transfer id to point to the ldap server with the master replica. I did create too many projects which I think caused me the lum errors which I couldn't get past. With the source server turned off I followed a TID dated 2009 for this LUM error and modified the unix object which had been created to be members of the groups it required, (luckily I had the previously migrated server unix object to compare to) quit the migration software and rebooted the server and then ran ndsrepair. No errors. I did not migrate any services.
Further investigation revealed errors relating to obtaining the SSLCert but it has not expired and despite the cant get it messages the files .der and .pem appeared in the correct folders on the target server. I did copy the .der file to the required location naming it with the ipaddress as per manual instructions. The target server now has a case of dual identity. The nss volumes are mounted ok and the users can map drives using the source server name but the Suse Linux server still thinks that its the pre-migration server when I run a terminal session. Ifconfig shows the correct source server ip. Consoleone is another story. The volume objects are the old ones and the new ones with pools are not showing. From the users viewpoint it works.
Before I do more damage can someone please point me in the right direction. The target name did change to the source before the restart so therefore I should just need to do the hostname rename manually. Should I start at step 7 in the manual instructions in an attempt to fix this server or should I abandon it and start again?

$(UKevin
This defect will make into the next OES2SP2 Patch (post September). We didn't have enough time for QA to regress the fix for September Patch.
-Ramesh
>>>
From:
kjhurni<[email protected]>
To:
novell.support.open-enterprise-server.migration
Date:
10/05/2010 09:06 PM
Subject:
Re: Transfer ID failed with LUM errors
Great, thanks!
As I mentioned previously, we DID find a bug about 3 weeks ago with LUM
repairfailing during the "group" (admingroup). We do have a field
patch for it, but obviously it's not made it into the channel yet.
So if you DO still have that problem, you should probably ask for the
patch (it's one file).
The defect #635574
Should help them reference the bug and get the patch for you.
I'm not sure when it will be released into the patch channel.
Not to say this fixes any and all LUM problems but since we have that
patch, we've not had any issues with the remaining OES2 SP2 64-bit
servers we've done with ID Transfer.
kjhurni
kjhurni's Profile: http://forums.novell.com/member.php?userid=734
View this thread: http://forums.novell.com/showthread.php?t=422454

Install OCS 10.1.2 Infra DB failed with LDAP: error code 16 on Workspaces

during install OCS Infrastructure DB OCS have error:
... processed key-value: logfile=/oracle/product/dbocs/workspaces/logs/cw_config_backend.log
... processed key-value: action=setup_backend
... processed key-value: oh=/oracle/product/dbocs
... processed key-value: oid=oid.domain
... processed key-value: oid_port=389
... processed key-value: oid_user_dn=cn=orcladmin
... processed key-value: oid_passwd=xxxxxx
... processed key-value: db_sn=ocs.domain
... processed key-value: dba_user=sys
... processed key-value: dba_passwd=xxxxxx
... processed key-value: cw_db_passwd=xxxxxx
Attempting to set logfile to: /oracle/product/dbocs/workspaces/logs/cw_config_backend.log
Processed oh=/oracle/product/dbocs
BACKEND installation ...
... Trying to lookup database dn
... Obtain OID connection
...... Can not obtain OID ssl port.
...... OID port = "389"
...... Trying to establish a non-ssl connection. OID host "oid.domain", OID port "389", OID user dn "cn=orcladmin".
... OID connection created.
...... You must specify either db_dn or db_sn.
...... ldap search filter "(&(objectclass=orcldbserver)(orcldbglobalname=ocs.domain))"
...... Succesfully located database dn "cn=ocs,cn=OracleContext".
...... Database dn = "cn=ocs,cn=OracleContext"
... Validating existence and version of CW schema: "CWSYS" in database: "cn=ocs,cn=OracleContext".
... Obtain JDBC connect string
... JDBC connect string = "(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
...derived: "jdbc_str=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))".
Opening JDBC connection: "jdbc:oracle:thin:sys/xxxxxx@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
Opening JDBC connection: "jdbc:oracle:thin:sys/xxxxxx@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
Unlocking schema and setting passwd: "CWSYS/xxxxxx".
Opening JDBC connection: "jdbc:oracle:thin:sys/xxxxxx@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ocsoas.domain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ocs.domain)))"
... Checking Workspaces container.
... Container "cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext" already exist.
... Finish checking Workspaces container.
... Trying to create backend application entity in OID
...... Database dn = "cn=ocs,cn=OracleContext"
...... Backend entity name = "ocs"
...... Backend entity dn = "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext"
... Backend entries already exist. Cleanup old entries.
deregisterProvisioningListener ...
app dn = orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext
subscriber = dc=domain,dc=com
... Trying to remove entity "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext".
... Deleting "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext"
Adding Workspaces application entity to: cn=Service Registry Viewers,cn=Groups,cn=OracleContext
Adding Workspaces application entity to: cn=Service Registry Admins,cn=Groups,cn=OracleContext
... Insufficient privilege to create application entity "orclApplicationCommonName=ocs,cn=Database Instances,cn=CollaborativeWorkspaces,cn=Products,cn=OracleContext". Please check the user DN and password.
javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]; remaining name 'cn=Service Registry Admins,cn=Groups,cn=OracleContext'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3009)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1373)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:235)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:147)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:136)
at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:136)
at oracle.workspaces.share.util.oid.OIDShareUtil.setEntryAttribute(OIDShareUtil.java:471)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroup(OIDShareUtil.java:420)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroupIgnoreDuplicateMember(OIDShareUtil.java:435)
at oracle.workspaces.install.CwConfigOID.createBackendEntity(CwConfigOID.java:1205)
at oracle.workspaces.install.CwConfigOID.registerBackend(CwConfigOID.java:449)
at oracle.workspaces.install.CwConfig.regBackend(CwConfig.java:320)
at oracle.workspaces.install.CwConfig.run(CwConfig.java:609)
at oracle.workspaces.install.CwConfig.main(CwConfig.java:790)
oracle.workspaces.install.CwCAException: Error while executing action: "setup_backend"
Caused by: javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]
at oracle.workspaces.install.CwConfig.run(CwConfig.java:639)
at oracle.workspaces.install.CwConfig.main(CwConfig.java:790)
Caused by: javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]; remaining name 'cn=Service Registry Admins,cn=Groups,cn=OracleContext'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3009)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1373)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:235)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:147)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:136)
at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:136)
at oracle.workspaces.share.util.oid.OIDShareUtil.setEntryAttribute(OIDShareUtil.java:471)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroup(OIDShareUtil.java:420)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroupIgnoreDuplicateMember(OIDShareUtil.java:435)
at oracle.workspaces.install.CwConfigOID.createBackendEntity(CwConfigOID.java:1205)
at oracle.workspaces.install.CwConfigOID.registerBackend(CwConfigOID.java:449)
at oracle.workspaces.install.CwConfig.regBackend(CwConfig.java:320)
at oracle.workspaces.install.CwConfig.run(CwConfig.java:609)
... 1 more
javax.naming.directory.NoSuchAttributeException: [LDAP: error code 16 - One or more values for attribute uniquemember does not exist]; remaining name 'cn=Service Registry Admins,cn=Groups,cn=OracleContext'
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3009)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2934)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2740)
at com.sun.jndi.ldap.LdapCtx.c_modifyAttributes(LdapCtx.java:1373)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_modifyAttributes(ComponentDirContext.java:235)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:147)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.modifyAttributes(PartialCompositeDirContext.java:136)
at javax.naming.directory.InitialDirContext.modifyAttributes(InitialDirContext.java:136)
at oracle.workspaces.share.util.oid.OIDShareUtil.setEntryAttribute(OIDShareUtil.java:471)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroup(OIDShareUtil.java:420)
at oracle.workspaces.share.util.oid.OIDShareUtil.addMemberToGroupIgnoreDuplicateMember(OIDShareUtil.java:435)
at oracle.workspaces.install.CwConfigOID.createBackendEntity(CwConfigOID.java:1205)
at oracle.workspaces.install.CwConfigOID.registerBackend(CwConfigOID.java:449)
at oracle.workspaces.install.CwConfig.regBackend(CwConfig.java:320)
at oracle.workspaces.install.CwConfig.run(CwConfig.java:609)
at oracle.workspaces.install.CwConfig.main(CwConfig.java:790)
What should i do?
help.
Thanks

closed
Re: Install OCS 10.1.2 Infra DB failed with LDAP: error code 16 on Workspac

Services in transaction sicf failing with Internal Error 500

Similar Messages

Maybe you are looking for