Services menu in Contextual Items menu

Does anyone know of a utility that will put the Services Menu in the Contextual Menu Items menu so that you can right-click to access it. I could make so much more use of it if it was actually easily accessible. I've seen a utlility that will move it to the menu bar but i'd rather right-click.

Since the issue is specific to your original user account, you can proceed in two ways. One is to log into your new account, make a list of the preference files (plists) located in /username/Library/Preferences/, including any in the ByHost subfolder, log back into the original account, move everything on that other account's list from the original account's Preferences folder into a newly created folder on the Desktop, log out and back in, and see if the problem goes away. If so, you can copy the ones in the Desktop folder (one at time) back into /Preferences/, restart, and see if the problem returns. If so, you've identified the corrupt/conflicting one. Continue with all of them until isolating the bad ones. That'll save you the trouble of resetting preferences.
The second way is much more detailed and I'll not burden you with the steps unless the above doesn't fix the issue.

Similar Messages

Manual menu shows two active menu items on one page

Hi--I'm having an issue where a manually-created menu shows two active menu items on the same page (as if two pages were active at the same time).
You can see the issue on my test site here:
http://teknationnewsite.businesscatalyst.com/telecommunications-services.html
On the left hand menu, even though only the Telecommunications Services page is active, the menu shows an active state for the menu item below it also. How can I fix this? The states look like they are created correctly in the states panel.
Thanks,
Jennifer

Okay, never mind. I am an idiot. It was a linking issue. I can't figure out how to delete this thread, however, so just please ignore.

How do I create a drop down menu with multiple items in Adobe Acrobat 9?

I am trying to create a drop down menu with four items within a field box. When I try to do this
the font is too big and it just doesn't fit.

You can use panel widget to create manual menu where set to show target on rollover.
Something like this :
http://muse.adobe.com/exchange-library/menu-vertical-accordion-widget-1
http://muse.adobe.com/exchange-library/tiptop-navigation-menu
Thanks,
Sanjit

Menu has 19 items...and it is not allowed???

So i have 17 videos on a menu page plus Main Menu and Play all
Adobe throws a error saying it only allows 18 items on a page
So i am thinking making another additional page before it ...a page that has three buttons Play all go to 17 videos main menu
Then take out play all from the page with 19 items leaving me with 18 items
I am wondering if i am cutting it too close and maybe make another page on that has videos 1-10 and another that has 11-17?
Along this same line each of the videos are from 2:30 seconds to 4:30 for an hour total tme
Would it be better to lay these short videos all on one timeline or make a separate one for each?
The reason i ask is that each video has a 5 second title page ( quiet no sound ) and i am thinking of using the play all to start at the
place where each audio starts instead of the beginning where the quiet title starts.
Not sure yet on how to do this from user experience. The are meditation videos so the quiet might not be bad in between
Any input on this is welcomed :-)
Thanks

Interesting to me that the smaller menu has twice the possible buttons!
Thanks again Ann!
Thoughts on this part?
Along this same line each of the videos are from 2:30 seconds to 4:30 for an hour total tme
Would it be better to lay these short videos all on one timeline or make a separate one for each?
The reason i ask is that each video has a 5 second title page ( quiet no sound ) and i am thinking of using the play all to start at the
place where each audio starts instead of the beginning where the quiet title starts.
Not sure yet on how to do this from user experience. The are meditation videos so the quiet might not be bad in between
Any input on this is welcomed :-)
Thanks

What's happening to my menu and tool items?

After updating Acrobat Pro to Acrobat Pro DC yesterday I've had some issues regarding my menu and tool items being saved. I work in design/print so like to have things set up for what I use the most.
I added and deleted tools to the right hand side bar and then added items to the top menu bar via the View > Show/Hide > Toolbar Items > (File, Edit, Page Nav, etc) method.
Have fired up Acrobat today and now they've gone - it's back to the default settings. In addition, my preferred Save as Optimised PDF settings have defaulted too.
I noticed this happened during a recent upgrade to Pro X, it was a pain to reset but at least things were back to how I like it.
Am I missing something?
Mac OSX Yosemite 10.10.2 with all software up to date.

Hey markc60921144,michaelo51621764markc60921144
I am really sorry as I misunderstood the query.
This should not have happened as those settings should have been saved.
Could you please try installing Acrobat DC again and check.
Regards,
Anubha

Recent Items Menu

is there a way to pin files to the recent items menu so that they don't get removed when clearing the list?

Hi, and welcome to the Palm Community Forums.
The only thing I know of which is similar to that is a list of recent Palm applications which you have opened. You can bring it up by pressing and holding the "Home" button (the top right button on the front of the Centro).
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

How to use item menu 1293

how to use the item menu 1293 on the matriz row??

Have you checked this: Re: How to detect a line delete (order) ?
Thanks,
Gordon

How do i disble edit menu's delete item on the oracle forms 11i

How do i disble edit menu's delete item on the oracle forms 11i
i have an oracle form that i created using standard template, i am able to disable the edit.clear button but cannot disable the edit.delete button.
Pelase help.

Hi user6010265
Welcome here :)
but unfortunatly u mis-choose the right forum pls follow the following link they might be more helpful than us..
Transfer alert in 11i
Regards,
Abdetu...

Spry Vert Menu: Weird top item display in DW design view

Whenever I insert a vertical menu, the top Item always dispalys in Design View right justified (see attached image). Really distracting. Displays fine once published. Just bugging me?

Thanks Ben. Code below. I didnt really think it wa simportant mainlyu because this is is the totally untweaked DW code dropped in
after choosing a vertical menu spry via the wizard menu. I did nothing to this code. ANY menu I drop in thgru the wizard shows up like this initially - its the default drop in code from DW program itelf doing htis.
<TABLE WIDTH="100%" BORDER="0" CELLSPACING="0" CELLPADDING="0">
<TR>
    <TD WIDTH="200" VALIGN="TOP" BACKGROUND="images/leftmenubg1.gif">
   <script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0','widt h','200','height','215','src','flash/flashlogo','menu','false','quality','high','bgcolor', '#000000','pluginspage','http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Ve rsion=ShockwaveFlash','movie','flash/flashlogo' ); //end AC code
</script><noscript><OBJECT CLASSID="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
      CODEBASE="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0"
      WIDTH="200" HEIGHT="215"><PARAM NAME="movie" VALUE="flash/flashlogo.swf"><PARAM
      NAME="menu" VALUE="false"><PARAM NAME="quality" VALUE="high"><PARAM
      NAME="bgcolor" VALUE="#000000"><EMBED SRC="flash/flashlogo.swf" MENU="false"
      QUALITY="high" BGCOLOR="#003366" WIDTH="200" HEIGHT="215"
      TYPE="application/x-shockwave-flash"
      PLUGINSPAGE="http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash"></O BJECT></noscript>
     <BR>
                 <BR>
            <ul id="MenuBar1" class="MenuBarVertical">
                   <li><a href="index.html">Home</a>                   </li>
                   <li><a href="news_events/events/events.html">Events</a></li>
                   <li><a href="education/cme/cme.html">Publications</a>                   </li>
                   <li><a href="pda/index.html">Tools</a>                   </li>
                   <li><a href="disclosures.html">Disclosures</a></li>
                   <li><a href="consult.html">Consulting</a></li>
                   <li><a href="mission.html">Our Mission</a></li>
                   <li><a href="members.html">Our Members</a></li>
                   <li><a href="history.html">Our History</a></li>
                   <li><a href="contact.html">Contact</a></li>
            </ul>
<script type="text/javascript">

     </script>

Strange files in Recent Items menu

I've been getting strange files in my Recent Items menu that I never opened. And when I try to open them, I can't. Here are some of the file names.
AE39.staple
GHAEA.staple
Does anybody recognize any of these kind of files?

As far as I understand it, the app is just an installer and it should only run once, to install the firmware on your DVD drive, but a lot of users have had problems with it running every time they log in (normally it should bring up a window). I tried running it manually and it does leave those same files in my Recent Items menu, as you described.
First take a look in your login items (System Preferences->Accounts) and look for a reference to SuperDrive Update 2.1. If one exists then deleting it should solve the problem. If you want, you can then move the app to the trash (although leaving it be does no harm). If it's not in the list, post back.

Circle menu with doubled items onclick rotate to anchor

Hi all, I have a problem because I dont know from where i should start with this project.
-grey area is invisible
-white with pink stroke is site
-menu is black
-items are colored lines
-black dot is an "anchor point" where menu should rotate to that clicked item will be aligned (when i click yellow item > menu spin > clicked item is aligned with black dot)
As you can see there are multipled items and they will direct to the same part of the site but thats not a problem.
The main problem is that i dont know how to make menu spin that way that clicked item will always align next to anchor point.
If you have any idea/documents/plugins - i will be very greatful.

made you a starting template https://app.box.com/s/k9d9ivbpckg82me11wkp
if you click the lines it will rotate to it

PDA Menu Selection (user) Item Tag returns Item Name

Using LV Mobile 8.6.1 with iPAQ on Windows Mobile 5.0 (5.1.1702) I have a custom run-time menu. The Item Tags are shortened versions of the full Item Name. The event structure provides the Item Tag, but the actual string value returned is the full Item Name. The Item Path returns the complete hierarchy of the menu selection, but also contains the Item Name.
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

Hi David,
My PDA application has a custom run-time menu of 20 items. Some menu items are up to 4 words in length, so I used unique single-word names for the item tag to differentiate the commands. Debugging my code, only the single word menu items executed correctly. All others ended up in the default case.
This has to be a bug in LabView, that the event structure returns the Item Name in place of the cluster element labeled Item Tag. The same problem exists in the Get Menu Selection.vi.
The work around was to change all the case elements to match the item name and not the tag. The item tag then is never used.
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

Traversal of custom item menu icons in form

Here is one doubt for me
me created one menu design with customitem subclass creating background image with sprite class and menu icons over it as in mobile(grid view) using default method paint() g.drawImage();
and then appended this customitem to form. Now the problem is how to traverse among the custom item menu icons.
i am aware of traverse() and traverout() methods, but don't know how to enable it
Pls suggest me expecting a positive reply
Thanks
charles v c

this is the code that i use
import java.util.Vector;
import javax.microedition.lcdui.*;
import javax.microedition.midlet.MIDlet;
import javax.microedition.midlet.*;
import javax.microedition.io.*;
import java.io.*;
public class IconsTester implements CommandListener, ItemStateListener {
private Display display;
private Form mainForm;
private ChoiceGroup optionsGroup;
private int itemNum;
private Command CMD_NEXT= new Command("Next", Command.ITEM,
2);
private Command CMD_BACK= new Command("Back", Command.BACK,
1);
private Image newApp = null;
private Image viewApp = null;
private Image cancelApp = null;
public IconsTester(Display d, Form backF)
display = d;
mainForm = new Form("Appointments");
mainForm.append("Choose an action to be performed: ");
Image[] imageArray = null;
try {
newApp = Image.createImage("/success.png");
viewApp = Image.createImage("/search.png");
cancelApp = Image.createImage("/time.png");
imageArray = new Image[] { newApp, viewApp, cancelApp };
catch (java.io.IOException err) {
System.out.println(err);
mainForm.append(new Spacer(40,40));
mainForm.append(newApp);
mainForm.append(new Spacer(40,40));
mainForm.append(viewApp);
mainForm.append(new Spacer(40,40));
mainForm.append(cancelApp);*/
mainForm.addCommand(CMD_BACK);
mainForm.addCommand(CMD_NEXT);
mainForm.setCommandListener(this);
mainForm.setItemStateListener(this);
display.setCurrent(mainForm);
public void commandAction(Command c, Displayable s) {
if (c == CMD_BACK) {
display.setCurrent(Login.list);
else
mainForm.setItemStateListener(this);
public void itemStateChanged(Item item)
if( item.equals(newApp))
{    itemNum = 0;
new NewAppointment(display, mainForm);
else if( item.equals(viewApp))
{    itemNum = 2;
new NewAppointment(display, mainForm);
else if( item.equals(cancelApp))
{    itemNum = 1;
new NewAppointment(display, mainForm);
}

Hide list item menu using CSR

Hi,
Is it possible to hide specific custom actions from list item menu for an XSLTListView webpart using CSR... The list has some custom actions created through SPD and we wanted to hide the out of the box list item menus. Could
someone please point me to some examples.. and what would be an alternative in case this is not possible.. jquery...?
Thanks
Anisree

In the View Settings under the Filter option check "Show Items only when the following is true:"
Select the Expiry Date column for the "Show the items when column option".
Condition should be "is greater than", or "is greater than or equal to" if they don't expire until the end of the current day.
And for the value put [Today] including the square brackets.

Spry Menu Bar - Freezing the Menu item in hover when clicking a submenu item

Hi,
I am trying to add a feature to a verticle spry menu bar that freezes the menu item or "parent" (to apear to be hovered) when clicking one of the parents sub-menu items. I want to do this so that users can know how they arrived at the page they're on.
Thanks for your help,
-Shiva

To look at your intention in a different way,
Hover over a submenu item
Parent item is colored/indicated
Submenu item is colored/indicated
Click on the submenu item
New page opens
Parent item "remains" colored/indicated on the new page
There are three or four ways to do this, depending on your site setup, but one basic concept to understand. The emphasis on the Parent menu item is totally independent of whether you got to the new page via the menu or by some other means. The emphasis will always be there, though it will appear to be connected to your clicking on the menu!
Say you have a menu with two Parent menu items, flowers and trees.
On the Flowers menu are submenus: Tulips, Roses, and Gardenias, On all three different Flowers pages (Tulips, Roses, Gardenias), the Flowers parent item will be emphasized.
On the Trees menu are submenus: Oak, Maple, Spruce. On all three different Trees pages (Oak, Maple, Spruce), the Trees parent item will be emphasized.
If you want to go in to each page individually, you can use a general indicator like id="localemphasis". (To emphasize more than one thing on a page, use a class instead of an id)
Using this method, on the Tulips, Roses, and Gardenias pages, put id="localemphasis" on the Flowers parent menu item.
On the Oak, Maple, and Spruce pages, put id="localemphasis" on the Trees parent menu item.
To control the emphasis from the CSS stylesheet, you won't need to go into each page, but you will ID each parent menu item.
Give each 'category' (Flowers, Trees) page a body ID to match the category
Every Flower page wants the Flower parent menu item emphasized, give all three Flower pages a body tag like this: <body id="flowers">
LIkewise, every Tree page wants the Tree parent menu item emphasized, as <body id="trees">
Within the menu itself and on ALL pages, give each parent menu item an id to correspond to its category
<li id="flowers_m">Flowers</li>
<li id="trees_m">Trees</li>
          I have added a "_m" to remind myself that it is the menu item's id. You might need to put the id on the <a> link if you have not used a list for your menu.
In your CSS stylesheet,
   #flowers #flowers_m,
     #trees #trees_m {background-color: red; color: white;}
Please use your own code! White on red might not be your cup of tea...use the same styling as the "hover" styling you mention in your query.
To interpret what we have just done, we have said
     make the background-color red and the text white
for the parent menu item Flowers (id="flowers_m") when you are on a Flowers page (body id="flowers")
and for the parent item Trees (id="trees_m") when you are on a Trees page (body id="trees").
This emphasis is good feedback for your user...remember that for SEO purposes, you will also want to use actual HTML text to reinforce the page environment, that is, h1 titles like FLOWERS and TREES. That will provide more feedback for your user.
Beth

Services menu in Contextual Items menu

Similar Messages

Maybe you are looking for