Services monitored by SCOM 2012

Hi All,
I am using SCOM 2012 SP1 in our environment. I am a bit puzzled about what all services of a windows server are monitored by default in SCOM. I am asking this because recently we have WinRM service stopped on a windows server but no alert get generated in
SCOM. Does I need to manually set up monitoring for this service?
Regards,
Daya

Hi,
The System Center Management Pack for Windows Server Operating System provides the fundamental monitoring basics for computers.
From what I can see, the WinRM service is not monitorred by default.
And I would like to suggest you also download the MP guide for Operating System management pack to get more details:
http://www.microsoft.com/en-hk/download/details.aspx?id=9296
Regards,
Yan Li
Regards, Yan Li

Similar Messages

How to configure windows services alerts in SCOM 2012 for all agent servers. For eg, Terminal Services, Netlogon, RPC etc..

Hi,
I need to configure different windows services alerts in SCOM 2012. Below are some of the windows services I need to monitor through SCOM.
Serivce: Windows Management Instrumentation
Service: Netlogon
Service: Remote Procedure Call (RPC)
Service: Server Service
Service: Terminal Services
Service: Windows Time
Service: Workstation
Service : WWW Publishing Service
Could some one please assist or share me the details, how to configure these services for windows agent servers.
Thanks..
Regards, Rajeev Parambil

Hi,
A certain set of services are monitored by default on all agents:
DNS Client
DHCP Client
RPC
Workstation
Server
For all the other services you could create a service monitor.
A nice blog series outlining this process can be found here: http://www.bictt.com/blogs/bictt.php/2011/03/16/scom-monitoring-a-service-part1
It's doing common things uncommonly well that brings succes. Check out my SCOM link blog:
SCOM link blog

Windows Azure Monitoring in SCOM 2012 R2

Hi,
We have Azure subscription which has few cloud services and VM in running state. We want to monitor the VMs running on Azure using SCOM 2012 R2 running on our corp network behind firewall. SCOM Server connected to the internet through the corp proxy.
We have imported the Azure Management packs in to SCOM and Added the Subscription successfully. But, the Azure resource inventory like Discovered Cloud Services, Discovered Storage, Discovered Virtual Machines are empty.
Kindly please help to configure azure monitoring using SCOM 2012 R2.
Thanks
Kumaresan Lakshmanan

Hi
SCOM monitoring check data in azure store, check if the events and performace data is transferring to the azure store.if data is not transfering for event id counters monitor fail to work .
refer below link for more information
Implementing Windows Azure
Diagnostics (http://go.microsoft.com/fwlink/?LinkId=186765).
Transferring Diagnostic
Data to Windows Azure Storage (http://go.microsoft.com/fwlink/?LinkId=191347).
Regards
sridhar v

How is called the Services "OpsMgr Health Service" in the SCOM 2012 and Client machine?

Hi,
Can anybody tell me how is called the Services of OpsMgr Health Service in the SCOM 2012?
I have installed the agent of scom2012 on my client computer. But I dont find any agent called "OpsMgr Health Service" on the Client machine?
Regards

Hi
If you look in the services.msc window then it is listed as the System Center Management Service. This is the display name.
The actual service name is HealthService
Cheers
Graham
Regards Graham New System Center 2012 Blog! -
http://www.systemcentersolutions.co.uk
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/
The Ayman answer is god, It is called "Microsoft Monitoring Agent"

Dell server hardware component monitoring with scom 2012 R2.

hello ..
We have some dell poweredge r710 SFF 2X SIX CORE X5 SAS Servers ,I need to monitor its hardware components with scom2012 R2.I have installed os:windows server hyper-v server on this and windows server core OS management packs on scom and monitoring
working fine .next I want to know their is Latest Management pack available for this dell model server and what are hardware components can be monitored with scom 2012 R 2. I want to monitor Hardware failure such as Power failure ,cpu failure,disk
failure and NIC failure etc
Thanks
Richa

Hi,
Please refer to the User’s Guide of the DELL MP:
http://support.dell.com/support/edocs/software/smconect/msscom/40/en/ug/pdf/Dell_Server_Management_Pack_Suite_v4.0_UG.pdf
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Meanwhile, considering this is related to DELL products, if you need more information or further investigation, please also contact DELL support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Bulk URL Monitoring is SCOM 2012 SP1

Hey Team,
i need to setup 100 + url monitors in scom 2012 sp1, i came across a term named BULK URL Monitor which suits my requirement. The issue is i am failing to get it to work when i click Bulkmonitor.exe i am gettign the below error and not sure how to resolve
it.
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.EnterpriseManagement.Core, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.EnterpriseManagement.Core, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'
at Microsoft.EnterpriseManagement.BulkUrlManager.BulkUrlManagerForm..ctor()
at Microsoft.EnterpriseManagement.BulkUrlManager.Program.Main()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Any suggestions will be highly appreciated.
-vrkumar01
RajKumar

It worked.
intially i tried to install in \System Center 2012\Operations Manager\Setup & System Center 2012\Operations Manager\Server both failed but this
System Center 2012\Operations Manager\Console worked.
thanks a lot
-vrkumar01
RajKumar

Service Monitor in SCOM

Hi,
Want to understand on this -what happens for a service monitor in scom if a monitored service is removed in a server.
will the alert automatically clears off.
Regards,
Pradeep

SCOM turns it off as the service is not found on the server.
When you uninstall the service, SCOM might alert once that the service is in stopped state.
But if you recycle the SCOM health service on that agent. It won't alert again as the cache gets cleared.
Its always better to disable or remove the monitor first and then uninstall the service.
Hope this helps.
Thanks, S K Agrawal

Performance of Network Monitoring in SCOM 2012 SP1

Hi all!
I´ve problems with performance of the network monitoring feature in SCOM 2012 SP1.
According to the
guide the following should be adeqate:
•1000 network devices (approximately 12,500 monitored ports) managed by a resource pool that has three or more management servers
•500 network devices (approximately 6,250 monitored ports) managed by a resource pool that has two or more gateway servers
We have 800 network devices with a total of 24000 ports,
BUT only 1500 of them are monitored. This is basically what happens automatically after discovery, since only ports between monitored devices are monitored by default.
For this setup I first used only one management server dedicated to the Network Pool,
based on my assumption that if two servers could monitor 6250 ports, one server would be more than enough for 1500. I found this configuration working very poorly so I added another server. I now have two servers
dedicated for the Network Resource Pool. (They are NOT members of the “All management servers resource pool”)
Still, I get constant alerts regarding Health Services Private Bytes on these servers. They vary between 1-2Gbytes. Furthermore, if one of the servers goes offline, the network devices that was monitored by that server becomes grey for
several hours. Even if the server only is rebooted it takes forever to get everything online and green again.
I don´t really know what I should do now. I had a plan to replace our current network monitoring system (SNMPc) which easily handles this load on only one server. They are of course completely different beasts, but still. SCOM seems to
require a massive back-end to produce equivalent real life results.
Any suggestions or reflections from the field are highly appreciated!
Regards
Peter

Hi,
Try to overide the monitor Health Services Private Bytes by the following steps.
◾Go Authoring space – Management Pack Objects – Monitors
◾Go to change scope – select clear all – look for Health Service – tick it and press OK.
◾Expand Health Service – expand Entity Health – expand Performance – expand Health Service Performance
◾Select the Health Health Service Private Bytes Threshold.
◾Right click the mouse and choose to overide the monitor for a group
◾Select the group called Management Server Computer Group and press OK
◾Select the Agent Performance Monitor Type – Threshold and change the value 104857600 to ex. 2610612736.
◾Select to store the overide in a management pack you have created and press OK
Juke Chou
TechNet Community Support

Minimum value of UNIX/Linux Heartbeat Monitor in scom 2012

Hi,
In my environment, we have SCOM 2012 server, when I change values of UNIX/Linux
Heartbeat Monitor: Interval , Missed
Heartbeats and Missed Heartbeats from 300 , 630 ,2 to 120, 150, 1 in event viewer shows Error
11112:
The Microsoft Operations Manager Consolidate Module failed to initialize because the specified compare count is less than the minimum
Compare count value : 1
Minimum value allowed : 2
One or more workflows were affected by this.
What is the best minimum value?
Thanks

You've ended up in the wrong forum. mostly service manager here, Ops manager is
over there https://social.technet.microsoft.com/Forums/en-US/home?category=systemcenteroperationsmanager.
That being said, the error you reference is somewhat abstracted from the values you adjusted. the error you posted is the system comparison operator complaining that it only has one thing to compare, typically you need two things to do a comparison.
Here is a person running into a similar problem with the lync MP, where it was trying to compare the site assignment of two systems, but the environment only has one system.
http://thoughtsonopsmgr.blogspot.com/2014/09/lync-server-2010-mp-bug-alert.html. is it possible this is an outgrowth of something similar in your unix environment? Do you have any more details about the specific health XML that's failing?

Service Monitoring in SCOM which triggers an alert after a wait time

Hi ,
I have a requirement to amend on of our services monitors to alert after waiting for 3 minutes after the service goes down.
Is this possible using SCOM or do we need to script this.
Please advise.
Jesty

For configure that using script, you can refer below link
http://blogs.technet.com/b/fesiro/archive/2012/11/26/how-to-configure-command-notification-in-scom-2012-with-powershell-script.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

General hardware monitoring on SCOM 2012 R2

Hello everybody. Sorry for maybe common question, i'm absolutely newbie in SCOM. I'm standing at task of monitoring basic servers counters - Memory utilization, disk free space & CPU utilization. After reading some articles about SCOM architecture I
get a little frustrated - cannot get full understanding about monitoring mechanisms. What I want from my monitors:
- Monitor 2,3...N groups of servers with _different_ disk free space thresholds and sending alerts (email) to specific people.
I've already have imported management pack for Windows OS, configure channels & subscribers.
I get a lot of question trying to configure such monitoring, maybe you can help me (or send me to manuals)
1. I can use monitor's for specific OS (i.e. logical disk free space), then I need to override it(why? I can't use it?) and select servers.
2. How can I map a group of servers to monitor?
3. Do I need rules?
4. New monitor sets in installed agents automatically?
Cannot understand steps, in which I should resolve my task..

1. Windows OS management pack has default monitor for disk free space and CPU utilization. If you 2,3,...N groups of servers with different disk free space thresholds, you should create Groups which contains the required servers and using override with target
of the gorups.
For how to create an override, pls. refer
http://jimmoldenhauer.blogspot.hk/2012/11/scom-2012-creating-overides.html
2. The target of the monitor is set to the groups of server
3. It depend on situation
Rules do not affect the health state of the target object. They are used for one of three functions
a) Alerting Rules
Alerting rules create an alert when a particular event is detected. This can be any of the different kinds of events shown in Data Sources. Alerting rules do not affect health state.
b) Collection Rules
Collection rules collect events or performance data to the Operations Manager database and data warehouse. They do not create alerts or set health state.
Collection rules can use each of the data sources shown in Data Sources. The data will be converted to either an event or to performance data depending on the particular kind of collection rule you are creating. For some wizards, you will need to provide
the specific information from the data source that will be used for different properties of the data being collected.
c) Command Rules
Command rules will run a script or command on a schedule. They do not create alerts or collect any data.
4) All agents will automatic download updated its monitor and rule which applicable to the server.
Roger

Exchange 2010 and 2013 Monitoring with SCOM 2012

HI all,
I have exchange 2013 and 2010 in my environment , Iwant monitor both in SCOM 2012,
Can you all please tell can i implement 2013 monitorinng first later can i go to 2010 Monitoring, Please advise in that supported or do i need to go with exchange 2010 monitoring first

There are no dependencies on the 2010 MP so you should be good to go, see the following:

How to enable default disabled linux monitor on scom 2012 r2

hello,
I have scom 2012 r2 environment and i have imported 'SCOM 2012 R2 MP linux and Unix '.then installed agent on one of linux redhat6 machine.it got installed successfully but next how to get data in following highlighted portion except these am getting data
in all the portion.

To enable disabled rule,you can run below script by write MP name and class that you want to enable it
$MP
= Get-SCOMManagementPack
-displayname "Managment pack name"
| `
where {$_.Sealed
-eq $False}
$Class
= Get-SCOMClass
-DisplayName "rule name"
$Rule
= Get-SCOMRule
-DisplayName "*Events/sec"
Enable-SCOMRule -Class
$Class -Rule
$Rule -ManagementPack
$MP -Enforce
For more details, you can refer below link
http://www.systemcentercentral.com/opsmgr-2012-disabling-rules-and-monitors-in-bulk-in-powershell/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Can I Monitor Xamp(apache) hosted web service(OpenEMR) using scom 2012 sp1

i have installed OpenEMR using xamp(apache,mysql) and now i want to monitor what are the various that has been done by the OpenEMR webisite on my local machine, can any one just help to finding out these things.

Hi,
Based on my research, this software can be installed as service or not as service, if it is installed as service, then we can use SCOM to monitor the service status. And if it is not installed as service, to monitor it, we may need to analysis logs written
by this software.
And if you want to know what this software did to your computer, I think this should be known by the software vendors, you may need to post thread there. And what I can tell is that we can monitor the computer healthy therefore to know whether something
is wrong with the computer, and then analysis the issue to know whether it is caused by the software.
Regards,
Yan Li
Regards, Yan Li

Some of the SQL Server 2012 are not getting monitored in SCOM 2012 SP1.( basics monitoring is happening, expect SQL role)

Found that all the SQL servers are getting monitored, expect few servers which are having SQL server 2012 role.
proxy is enabled for these servers, when I checked discovered inventory for SQL 2012 database unable to find these servers in that list.
and other servers having SQL Server 2012 monitoring properly issue is with only few servers.

Hi,
thanks for the all the input, we are using service account as windows account instead of action account !!
will that also affect discovery of SQL role?
and also found that there are many alerts in SCOM console, with alert description :
SQL Server cannot authenticate using Kerberos because the Service Principal Name
(SPN) is missing, misplaced, or duplicated.
please let me know how we can resolve this issue, will it affect SQL discovery as well ?

Services monitored by SCOM 2012

Similar Messages

Maybe you are looking for