Services not testing in SICF

Hi All
i have installed Netwever BI 7.0.All the post installtion steps are also completed.The problem is that i whenever a test any service in SICF,it fails.Bex broadcaster is also not working.I think it is related to service issue.Kindly suggest.
Shankar

Hi Shankar
have you checked 8055 is running or not in SMICM and also the parameter for serverport for port 80$$ is set or not...
Bhudev

Similar Messages

Test service not working in SICF

Hi All,
In SICF transaction, after activating the /default_host/sap/bc/srt/IDoc service and when we give test service it shows "500 Internel Server Error."
Please help
Thanks,
Preetha Balan

Hello Preetha,
although it is an old post:
if you start transaction ST11 and look for the youngest file dev_icf<nr> you may find messages in it telling you about nodes which still are deactivated but have to be active for a successful test of your desired service.
Kind regards,
Jens

503 Service not available error while testing web service in SOAMANAGER

Hi guys,
We have created a web service in ABAP and want to test it in soamanager.
When trying to test it using the "Open Web Service navigator for selected binding" link in web service administration page we get the error page--
503 Service not available
Error: -6
Version: 7000
Component: J2EE Server
Date/Time: Thu Jul 30 10:40:50 2009
Module: http_j2ee.c
Line: 820
Server: cmphr_HRC_10
Error Tag:
Detail: Cannot reach external Application Server on localhost:51000
we have enabled the wsdl service in SICF and also the APP SOA MANAGER service.
Can anyone please help.
Thanks in advance.
Regards
Prince

Hi,
Detail: Cannot reach external Application Server on localhost:51000
51000 is the port when the j2ee engine runs. As you dont have java stack am afraid this would not work.
Regards,
Vamshi.

Internet Service Not Working, sending 404 error

Hi,
I just created an Internet Service pointing to a transaction and I published it but it is not working when I click on Start Service and the browser is opened, I know the servername and the url should be well created cause I delete the service name and change it for webgui and then it works so the hostname and port shoud be ok.
I can not see it either in the SICF transaction under the ITS path I followed the instructions in the Help Manual but is not working and can´t find why, has somebody done this that can help me out?
Thanx in Advanced!
Kind Regards,
Gerardo J

Hi Tobias,
Thank you for the Link, I have followed the steps and published the service in the SE80 Transaction, I checked the settings and are correctly pointing to internal ITS, but after I published the Service I start the SICF transaction and can not find my new Service to activate it, I´m looking in /sap/bc/gui/sap/its Path wich is the Path I have configured into Internet Transaction Server > Test Tab.
I really apreciate your help!
Kind Regards,
Gerardo J

WD demo application: "Service not available" although service active

Hi everyone
I am new in Web Dynpro and while doing some tutorials I came across WD application DEMO_CONTEXT_PROP (package SWDP_DEMO). I wanted to test it, but I get error page "Service not available" and error code 403 "Forbidden". And if I test the service directly in SICF, I get error message SHTTP009.
The service itself is active in SICF, as well as the mentioned services in SAP note 1088717. And I can run other WD demo applications (such as DEMO_TABLE) without problems. Only this one is giving me problems.
The funny thing is that in SICF there are 2 services called DEMO_CONTEXT_PROP! One is greyed out, the other one is active. But even if I right-click on the one that is greyed out, is still says "active"!?
Any suggestions? Thanks!

Hello Jan,
we had this issue some weaks ago. When upgrading a system to EhP3 SAP delivered a new WebDynpro ICF service which had already been delivered earlier in a support package.
Problem is that the name of the SICF service is not its key. The real key for the service is a generated GUID which is stored in the database. If you create a service and later SAP delivers it or if SAP developed in 2 different release stacks the service may appear dublicated as you have 2 different GUIDs for the service. If the service is there twice the system tries one by chance if you are unlucky it takes the inactive one and you get the 403 error.
Thanls to Ramp Up status we discussed this directly with development. Unfortunately there is no real cleanup / consolidation function yet. The straight forward solution was renaming one of the services. As you only use a Demo Web Dynpro ICF service any of them will work. Perhaps you have to activate the one which is not renamed (you cannot really choose which you rename as the SICF tree is totally confused by the 2 services).
If you have this trouble for a production service you need the SAP to tell you which service (which GUID) is the long term supported and rename the other (perhaps you have to rename, rename the other and then rename the first back). If you do not do this you get the same problem with every Support Package which touches the ICF Services again.
Best Regards
Roman Weise

503 Service not available

Hi.
Could you help me ....
I modified a bsp to display a PDF file into a new popup window, and I tested into my quality server using SE80 transaction and with my portal application after and evething was OK but when a released the new BSP into production server the BSP crashed.
This is the error message that throws:
503 Service not Available
Erro 6
Version 6040
MOdule http_j2ee_mt.c
Line 795
Server EMKIOAIX103_CRP_00
Details Cannot reach external application server on localhost:50000
I explain you my program does it:
1.- the user chooses the a record into a Inbox
2.- IC display its data with BSP IRecReason
3.- the user chooses a Action link
4.- IC display a action PRINT PDF
5.- the user selects a print pdf
This is my code to EH_ONGO than create the PDF spool
METHOD EH_ONGO .
DATA: function_name TYPE rs38l_fnam,
        dummy(254)        TYPE c,
        ls_archive_index TYPE toa_dara,
        ls_orderadm_h     TYPE crmt_output_orderadm_h_com,
        ls_activity_h     TYPE crmt_output_activity_h_com,
        ls_lead_h         TYPE crmt_output_lead_h_com,
        ls_opport_h       TYPE crmt_output_opport_h_com,
        ls_orgman_h       TYPE crmt_output_orgman_h_com,
        lt_partner_h      TYPE crmt_output_partner_h_comt,
        ls_pricingdata_h TYPE crmt_output_pricingdata_h_com,
        ls_sales_h        TYPE crmt_output_sales_h_com,
        ls_shipping_h     TYPE crmt_output_shipping_h_com,
        lt_payplan_d_h    TYPE crmt_output_payplan_d_h_comt,
        ls_customer_h     TYPE crmt_output_customer_h_com,
        ls_cumulat_h     TYPE crmt_output_cumulat_h_com,
        lt_billing_h     TYPE   crmt_output_billing_h_comt,
        lt_cancel_h      TYPE   crmt_output_cancel_h_comt,
        lt_appointment_h TYPE   crmt_output_appointment_h_comt,
        lt_billplan_d_h TYPE   crmt_output_billplan_d_h_comt,
        lt_billplan_h    TYPE   crmt_output_billplan_h_comt,
        lt_status_d_h    TYPE   crmt_output_status_d_h_comt,
        lt_status_h      TYPE   crmt_output_status_h_comt,
        lt_srv_subject_h TYPE   crmt_output_srv_subject_h_comt,
        lt_srv_reason_h TYPE   crmt_output_srv_reason_h_comt,
        lt_srv_result_h TYPE   crmt_output_srv_result_h_comt,
        ls_acs_h         TYPE   crmt_acs_h_com,
        lt_orderadm_i    TYPE   crmt_output_orderadm_i_comt,
        lt_orgman_i      TYPE   crmt_output_orgman_i_comt,
        lt_pricingdata_i TYPE   crmt_output_pricingdata_i_comt,
        lt_pricing_i     TYPE   crmt_output_pricing_i_comt,
        lt_product_i     TYPE   crmt_output_product_i_comt,
        lt_sales_i       TYPE   crmt_output_sales_i_comt,
        lt_shipping_i    TYPE   crmt_output_shipping_i_comt,
        lt_schedlin_i    TYPE   crmt_output_schedlin_i_comt,
        lt_customer_i    TYPE   crmt_output_customer_i_comt,
        lt_partner_i     TYPE   crmt_output_partner_i_comt,
        lt_item_cstics_i TYPE   crmt_item_cstics_tab,
        lt_billing_i     TYPE   crmt_output_billing_i_comt,
        lt_cancel_i      TYPE   crmt_output_cancel_i_comt,
        lt_finprod_i     TYPE   crmt_output_finprod_i_comt,
        lt_ordprp_i      TYPE   crmt_output_ordprp_i_comt,
        lt_appointment_i TYPE   crmt_output_appointment_i_comt,
        lt_billplan_d_i TYPE   crmt_output_billplan_d_i_comt,
        lt_billplan_i    TYPE   crmt_output_billplan_i_comt,
        lt_orderadm_i_qt TYPE   crmt_output_orderadm_i_qt_comt,
        lt_orderadm_i_in TYPE   crmt_output_orderadm_i_in_comt,
        lt_schedlin_i_cf TYPE   crmt_output_schedlin_i_cf_comt,
        lt_status_i      TYPE   crmt_output_status_i_comt,
        lt_working_set_e_s_bbp TYPE /1cn/working_set_e_s_bbp_t,
        lv_language LIKE sy-langu,
        lo_order TYPE REF TO cl_doc_crm_order,
        lv_object_guid TYPE crmt_object_guid,
        lv_object_kind TYPE crmt_object_kind,
        lv_status TYPE jstat,
        lt_status TYPE TABLE OF jstat,
        lv_error_tab_wrk TYPE ssferror,
        ls_output_options TYPE ssfcompop.
DATA: IP_SMART_FORM Type     TDSFNAME,
      IO_APPL_OBJECT Type Ref To OBJECT,
     IO_APPL_OBJECT Type Ref to CL_DOC_CRM_ORDER_H,
      IO_PARTNER Type Ref to CL_PARTNER_PPF,
      IS_ARCHIVE_INDEX Type TOA_DARA,
      CT_ARCHIVE_INDEX_TAB Type TSFDARA,
      IS_ARCHIVE_PARAMETERS Type ARC_PARAMS,
      control_parameters TYPE ssfctrlop,
      IS_MAIL_APPL_OBJ Type SWOTOBJID,
      IS_MAIL_RECIPIENT Type SWOTOBJID,
      IS_MAIL_SENDER Type SWOTOBJID,
      IP_USER_SETTINGS type TDBOOL,
      ES_DOCUMENT_OUTPUT_INFO type SSFCRESPD,
      ES_JOB_OUTPUT_INFO type SSFCRESCL,
      ES_JOB_OUTPUT_OPTIONS type SSFCRESOP.
Resultado generado: Formato PDF
data: l_pdf_xstring type xstring,
      lt_lines       type table of tline,
      ls_line        type tline,
      l_pdf_len      type i,
      lv_exist       type n,
      output_data    type ssfcrescl,
      lp_proc_stat TYPE ppfdtstat.
Explanation: this method executes the action,
gets the medium, gets the log, reads the messages from
the log and gets the spool id from the messages.     JLARIN 27/DIC/06
DATA: lv_event TYPE REF TO cl_htmlb_event_tableview,
      lv_index TYPE int4,
      wa_action TYPE LINE OF crmt_action_table_tab,
      ls_action_obj TYPE REF TO if_action_ppf,
      lr_action TYPE REF TO cl_trigger_ppf,
      lr_medium type Ref to     if_medium_ppf,
     ls_action TYPE zcrmt_action,
      lv_spoolid TYPE symsgv.
DATA:
     grid   type ref to cl_crm_ic_gridlayout,
     GLOBAL_EVENT     type string.
data: lo_trigger type ref to CL_TRIGGER_PPF,
      lo_sfprint type ref to CL_SF_PRINT_PPF,
      lo_typed_context type ref to CL_CRM_IC_IRECACTIONPLAN_CTXT,
      lt_all_data type PPFSINPRRU.
data: lo_rp_rc type i.
DATA: lv_head_guid      TYPE crmt_object_guid.
DATA: adminh     TYPE REF TO cl_crm_ic_irecactionplan_cn02,
        guidstring TYPE string,
        guid       TYPE crmt_object_guid,
        action_obj   TYPE crmt_action_obj_tab,
        lv_object_id TYPE crmt_object_id.
   DATA: request_event TYPE REF TO cl_htmlb_event.
   DATA: event_data    TYPE REF TO if_htmlb_data.
   DATA: event_value type string.
    event_data = cl_htmlb_manager=>get_event_ex( request ).
    if event_data is bound.
      try.
          request_event ?= event_data.
        catch cx_sy_move_cast_error.
          clear request_event.
      endtry.
      event_value = event_data->event_id.
      translate event_value to lower case.             "#EC TRANSLANG
   endif.
   if event_value <> 'x1_x3_x17_x21_actionitems'.
      return.
   endif.
TRY.
create object lo_sfprint.
create object lo_trigger.
    lv_exist = 1.
Get the header GUID
    adminh = typed_context->btadminh.
    guidstring = adminh->get_actionitem( 'GUID' ).
    If guidstring is initial.
       return.
    endif.
    lv_head_guid = guidstring.
    CALL FUNCTION 'CRM_ORDERADM_H_READ_OW'
      EXPORTING
        iv_orderadm_h_guid     = lv_head_guid
      IMPORTING
        ev_object_id           = lv_object_id
      EXCEPTIONS
        admin_header_not_found = 1
        OTHERS                 = 2.
       CALL FUNCTION 'CRM_ACTION_GET_TOOLBAR_IL'
      EXPORTING
        iv_ref_guid     = lv_head_guid
        iv_ref_kind     = 'A'
      IMPORTING
        et_action_obj   = action_obj
        et_action_fld   = action_fld
      EXCEPTIONS
        parameter_error = 1
        error_occurred = 2
        error_message   = 3
        OTHERS          = 4.
    IF sy-subrc EQ 0.
      LOOP AT action_fld INTO wa_action where applkey = lv_object_id.
      ENDLOOP.
      IF sy-subrc EQ 0.
         ls_action_obj = wa_action-action.
         lv_exist = 0.
      ENDIF.
    ENDIF.
    if lv_exist is initial.
    CALL METHOD ls_action_obj->get_processing
     IMPORTING
       ei_processing = lr_medium.
    CALL METHOD lo_trigger->get_appl
      RECEIVING
        result = io_appl_object.
      call function 'CRM_ACTION_GET_APPL_OBJECT'
        exporting
          iv_ref_guid          = lv_head_guid
          iv_ref_kind          = 'A'
        IMPORTING
          EV_APPL_OBJECT       = io_appl_object.
    CALL METHOD lr_medium->execute
      EXPORTING
        io_appl_ref       = io_appl_object   "lo_appl_ref
      RECEIVING
        rp_status         = lp_proc_stat
      EXCEPTIONS
        missing_arguments = 1
        OTHERS            = 2.
ip_smart_form = lr_medium->get_smartform( ).
    ip_smart_form = 'ZIMPR_ORDEN_RASTREO'.
get the function name for this smart form
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname           = ip_smart_form
      IMPORTING
        fm_name            = function_name
      EXCEPTIONS
        no_form            = 1
        no_function_module = 2
        OTHERS             = 3.
determine the tables of the application
CALL FUNCTION 'CRM_OUTPUT_SINGLE_READ'
    EXPORTING
      iv_object                 = io_appl_object
      iv_smart_form             = ip_smart_form
      ir_partner                = io_partner
    IMPORTING
      es_output_orderadm_h      = ls_orderadm_h
      es_output_activity_h      = ls_activity_h
      es_output_lead_h          = ls_lead_h
      es_output_opport_h        = ls_opport_h
      es_output_orgman_h        = ls_orgman_h
      es_output_pricingdata_h   = ls_pricingdata_h
      es_output_sales_h         = ls_sales_h
      es_output_shipping_h      = ls_shipping_h
      et_output_partner_h       = lt_partner_h
      et_output_payplan_d_h     = lt_payplan_d_h
      es_output_customer_h      = ls_customer_h
      es_output_cumulat_h       = ls_cumulat_h
      et_output_billing_h       = lt_billing_h
      et_output_cancel_h        = lt_cancel_h
      et_output_appointment_h   = lt_appointment_h
      et_output_billplan_d_h    = lt_billplan_d_h
      et_output_billplan_h      = lt_billplan_h
      et_output_status_d_h      = lt_status_d_h
      et_output_status_h        = lt_status_h
      et_output_srv_subject_h   = lt_srv_subject_h
      et_output_srv_reason_h    = lt_srv_reason_h
      et_output_srv_result_h    = lt_srv_result_h
      es_output_acs_h           = ls_acs_h
      et_output_orderadm_i      = lt_orderadm_i
      et_output_orgman_i        = lt_orgman_i
      et_output_pricingdata_i   = lt_pricingdata_i
      et_output_pricing_i       = lt_pricing_i
      et_output_product_i       = lt_product_i
      et_output_sales_i         = lt_sales_i
      et_output_shipping_i      = lt_shipping_i
      et_output_schedlin_i      = lt_schedlin_i
      et_output_partner_i       = lt_partner_i
      et_item_cstics_i          = lt_item_cstics_i
      et_output_customer_i      = lt_customer_i
      et_output_billing_i       = lt_billing_i
      et_output_cancel_i        = lt_cancel_i
      et_output_finprod_i       = lt_finprod_i
      et_output_ordprp_i        = lt_ordprp_i
      et_output_appointment_i   = lt_appointment_i
      et_output_billplan_d_i    = lt_billplan_d_i
      et_output_billplan_i      = lt_billplan_i
      et_output_orderadm_i_qt   = lt_orderadm_i_qt
      et_output_orderadm_i_in   = lt_orderadm_i_in
      et_output_schedlin_i_cf   = lt_schedlin_i_cf
      et_output_status_i        = lt_status_i
      et_output_wrk_set_e_s_bbp = lt_working_set_e_s_bbp
      ev_language               = lv_language.
control_parameters-langu = sy-langu.
control_parameters-no_dialog = 'X'.
control_parameters-getotf    = 'X'.
call function to process smart form
CALL FUNCTION function_name
    EXPORTING
      archive_index        = is_archive_index
      archive_index_tab    = ct_archive_index_tab
      archive_parameters   = is_archive_parameters
      control_parameters   = control_parameters
      mail_appl_obj        = is_mail_appl_obj
      mail_recipient       = is_mail_recipient
      mail_sender          = is_mail_sender
      output_options       = ls_output_options
      user_settings        = ip_user_settings
      orderadm_h           = ls_orderadm_h
      activity_h           = ls_activity_h
      lead_h               = ls_lead_h
      opport_h             = ls_opport_h
      orgman_h             = ls_orgman_h
      partner_h            = lt_partner_h
      pricingdata_h        = ls_pricingdata_h
      sales_h              = ls_sales_h
      shipping_h           = ls_shipping_h
      payplan_d_h          = lt_payplan_d_h
      cumulat_h            = ls_cumulat_h
      customer_h           = ls_customer_h
      acs_h                = ls_acs_h
      billing_h            = lt_billing_h
      cancel_h             = lt_cancel_h
      appointment_h        = lt_appointment_h
      billplan_d_h         = lt_billplan_d_h
      billplan_h           = lt_billplan_h
      status_d_h           = lt_status_d_h
      status_h             = lt_status_h
      srv_subject_h        = lt_srv_subject_h
      srv_reason_h         = lt_srv_reason_h
      srv_result_h         = lt_srv_result_h
      orderadm_i           = lt_orderadm_i
      orderadm_i_qt        = lt_orderadm_i_qt
      orderadm_i_in        = lt_orderadm_i_in
      orgman_i             = lt_orgman_i
      pricingdata_i        = lt_pricingdata_i
      pricing_i            = lt_pricing_i
      product_i            = lt_product_i
      sales_i              = lt_sales_i
      schedlin_i           = lt_schedlin_i
      schedlin_i_cf        = lt_schedlin_i_cf
      shipping_i           = lt_shipping_i
      partner_i            = lt_partner_i
      item_cstics_i        = lt_item_cstics_i
      customer_i           = lt_customer_i
      billing_i            = lt_billing_i
      cancel_i             = lt_cancel_i
      finprod_i            = lt_finprod_i
      ordprp_i             = lt_ordprp_i
      appointment_i        = lt_appointment_i
      billplan_d_i         = lt_billplan_d_i
      billplan_i           = lt_billplan_i
      status_i             = lt_status_i
      working_set_e_s_bbp = lt_working_set_e_s_bbp
      language             = lv_language
    IMPORTING
      document_output_info = es_document_output_info
      job_output_info      = output_data
      job_output_options   = es_job_output_options
    EXCEPTIONS
      output_canceled      = 1
      parameter_error      = 2
      OTHERS               = 3.
    call function 'CONVERT_OTF'
      EXPORTING
        format                = 'PDF'
      IMPORTING
        bin_filesize          = l_pdf_len
        bin_file              = l_pdf_xstring
      TABLES
        OTF                   = OUTPUT_DATA-OTFDATA
        LINES                 = LT_LINES
      EXCEPTIONS
        err_max_linewidth     = 1
        err_format            = 2
        err_conv_not_possible = 3
        err_bad_otf           = 4
        others                = 5.
      IF SY-SUBRC = 0.
        DATA: lv_string TYPE string,
              lv_numguid(10) TYPE N.
        lv_string = lv_spoolid.
        lv_numguid = lv_object_id.
       CALL METHOD op_previewspool( iv_spoolid = lv_string ).
        me->op_previewspool( iv_spoolid     = lv_string
                             lv_pdf_xstring = l_pdf_xstring
                             lv_guid        = lv_numguid ).
      ENDIF.
    endif.
    CATCH cx_sy_move_cast_error.
ENDTRY.
ENDMETHOD.
<b>This part send the result to a new windows and refresh a main page, but thow a error 503 ...</b>
method OP_PREVIEWSPOOL .
*{   INSERT         CRDK902447                                        1
DATA: lv_url TYPE string.
DATA: cached_response TYPE REF TO if_http_response,
      new_navegator   TYPE REF TO CL_WB_NAVIGATOR_NEW_WINDOW,
      new_navigation   TYPE REF TO CL_BSP_NAVIGATION.
DATA: guid TYPE guid_32.
Resultado generado: Formato PDF
data: l_pdf_xstring type xstring,
        display_url    type string,
        pagina_url    type string,
        display_pag    type string,
        V_TARGET_URL   TYPE STRING,
        W_APP_NAME     TYPE STRING,
        l_pdf_len      type i.
DATA: out TYPE REF TO IF_BSP_WRITER,
        lv_out TYPE REF TO cl_BSP_WRITER,
        lv_context Type Ref to IF_BSP_PAGE_CONTEXT,
        lv_body type string,
        lv_body2 type string,
        lv_guidmem(10) type n,
        lv_doscmd(200),
        lv_pag   type xstring,
        lv_back(2) type n.
IF not lv_pdf_xstring is initial.
    CREATE OBJECT cached_response TYPE CL_HTTP_RESPONSE EXPORTING add_c_msg = 1.
    l_pdf_len = xstrlen( lv_pdf_xstring ).
    cached_response->set_data( data   = lv_pdf_xstring
                          length = l_pdf_len ).
    cached_response->set_header_field( name = if_http_header_fields=>content_type
                                       value = 'application/pdf' ).
     cached_response->set_header_field(
                        name = 'content-disposition'
                        value = 'attachment; filename = test.pdf' ).
    cached_response->set_status( code = 200 reason = 'OK' ).
    cached_response->server_cache_expire_rel( expires_rel = 180 ).
    CALL FUNCTION 'GUID_CREATE'
      IMPORTING
        ev_guid_32 = guid.
DATA:
    LV_HOST     TYPE STRING,     "Host name
    LV_PORT     TYPE STRING,     "Port Number
    LV_LOCAL_URL     TYPE STRING,     "URL (Relative to the Current Server)
    LV_ABS_URL     TYPE STRING,     "URL (Absolute, incl. Protocol, Host, Port)
    LV_PROTOCOL     TYPE STRING,     "Available Protocol
    LV_servidor     TYPE STRING.     "Available Protocol
Construct the Target URL
      CALL METHOD RUNTIME->CONSTRUCT_BSP_URL
        EXPORTING
          IN_PROTOCOL       = 'http'
          IN_APPLICATION_NS = RUNTIME->APPLICATION_NAMESPACE
          IN_APPLICATION    = 'crm_ic'
          IN_PAGE           = '**/crm_ic'
        IMPORTING
          OUT_ABS_URL       = V_TARGET_URL
          OUT_HOST          = LV_HOST
          OUT_PORT          = LV_PORT
          OUT_LOCAL_URL     = LV_LOCAL_URL
          OUT_PROTOCOL      = LV_PROTOCOL.
        CONCATENATE 'crm_ic' '/**/' INTO W_APP_NAME.
      REPLACE W_APP_NAME IN V_TARGET_URL WITH SPACE.
    CONCATENATE V_TARGET_URL '/' guid '.pdf' INTO display_url.
    cl_http_server=>server_cache_upload( url      = display_url
                                         response = cached_response ).
    lv_url = adapter->if_bsp_page~get_page_url( ).
    if LV_PORT is initial.
       concatenate 'http://' LV_HOST lv_url+0(61) 'default.do' into lv_url.
    else.
       concatenate 'http://' LV_HOST ':' LV_PORT lv_url+0(61) 'default.do' into lv_url.
    endif.
      lv_body2 = '<html><head><script language=JavaScript>'.
      concatenate lv_body2 'window.open("' display_url '"); ' INTO lv_body2.
      concatenate lv_body2 ' location.href = "' lv_url '"; </script></head>' INTO lv_body2.
      concatenate lv_body2 '<body></body></html>' INTO lv_body2.
     concatenate lv_body2 ' function back(){ history.back( ); } </script></head>' INTO lv_body2.
     concatenate lv_body2 '<body><a href="javascript:back();">regresar</a></body></html>' INTO lv_body2.
      response->append_cdata( data = lv_body2 ) .
      response->set_header_field( name = 'content-type'
                                  value = 'text/html' ). "#EC NOTEXT
      response->set_header_field( name = 'cache-control' value = 'max-age=0' ). "#EC NOTEXT
     response->set_header_field( name = 'Expires' value = '0' ). "#EC NOTEXT
      navigation->response_complete( ).
return.
ENDIF.
endmethod.

Using the search bar, it seems it's a proxy issue, but finding a simple solution did not seem apparent. Have you tried a reboot? To reboot, hold the power and home buttons at the same time for at least 10 seconds (hold past the swipe to shut down bar, should it appear) until the Apple Logo appears, then let go fo both buttons and your iPad will restart. Hopefully, this will solve the problem......

Windows 7 64 bit, Apple Mobile Device Service not found.

Hi First post, sorry sorry if this is in the wrong place
I have a dell Laptop running Windows 7 X64 and Apple Mobile Device Service is not installing and cannot be found in services.
note the account has Admin privildges (the logging below is wrong) and UAC and Virus protection has been switched off.
I have used the apple processes to uninstall everything and then reinstall multiple times. I am defintly trying to install the latest 64 bit version.
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Dell Inc. Inspiron 1545
iTunes 9.0.2.25
QuickTime 7.6.5
FairPlay 1.5.23
Apple Application Support 1.1.0
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device Driver not found.
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number D67ADF69AA323879
Current user is not an administrator.
The current local date and time is 2010-01-11 16:46:14.
iTunes is not running in safe mode.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 9.0.2.25 is currently running.
iTunesHelper 9.0.2.25 is currently running.
Apple Mobile Device Service not found.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
** iPhone/iPod Touch Sync Tests **
No iPhone or iPod found.
thanks

I am having the same problem for three-four months now. When I called the help-desk of apple, they said windows 7 x64 wasn't compatible with itunes, and they told me that I had to wait for a newer version of itunes.

Web service not available in F4 help of document template

Hi ,
I have created a web service using tool WS_DESIGN_TOOL. Its active and status is productive. Now when I am creating document template , I am not able to see this web service in F4. Hence not able to create document template with my web service.
I also tried by copying standard web service and then using it but even that web service is not available in F4.
Do we need to any additional steps so that web service appears in F4 help of document template.
Thanks,
Madhura

Hi,
The service is active in SICF or in SE80 under package $WS_BOL_GEN.
I have assigned Business Transaction . I have followed steps as per below thread.
[Re: CRM 7.0 Document templates;
Any more suggestions are welcome.
Thanks,
Madhura

Service Not Available error with SSAS cube

Hi,
We imported Microsoft Analysis Services (SSAS) Cube into RPD using XMLA. While using the drill down feature in BI answers using presentation hierarchies, OBIEE is generating the following error
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: URL: http://<server>/<app name>/msmdpump.dll. The http return status is 503.< html><head><title>Service Not Available</title></head><body>Service Not Available</body></html>
However, drill down feature is working fine with attribute columns. Also the report is working fine up to certain level of drill down. In the log it is evident that OBIEE is generating multiple physical queries (with clause) to pull the data from the cube.
Is there any limit on the size of the mdx or number of mdx queries that msmdpump.dll can process? Is there any configuration that needs to be modified while working with SSAS cubes?
OBIEE version: 11.1.1.6.2 BP1
Much appreciate your time.

Hi Dhar,
Thanks for your reply.
Yes, your observation is correct. Changing the type of the hierarchies has some effect on the issue. I'm able to drill down to few more levels as the MDX generated by OBIEE in this less complex. But ultimately I'm facing the same issue after certain stage. I can only think of, the number of physical queries generated by OBIEE, as one of the possible reason for this. What is your opinion?
Interestingly, I tested the same RPD in 11.1.1.6.5 and I'm unable to reproduce in the issue so far in my testing . Is it a bug in 11.1.1.6.2?! However, upgrading to 11.1.1.6.5 is not an option for us at this stage.
Were you able to resolve the issue completely by only changing the hierarchy type? What version you have used in you project?
Thanks.

Web service not responding

Hi,
Issue - Web service not responding when we deploye the .ear file in prod instance. Same web service working fine in test instance.
We are using Oracle Enterprise Manager 10g server.
It is urgent for us.
Thanks,

If it is urgent, call support. Besides, this is the wrong forum as this is for Sun Application Server related issues.

Lion Server DNS service not working for locally created zones. Caching working fine.

OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?

I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

SCOM 2012 R2 & Exchange Server 2010 SP3 - Mailbox services not monitored

Having done everything depicted in Exchange Server 2010 MP I still have trouble with some Exchange services - they are in not monitored state (five days passed):
Mailbox All Database Services - Default-First-Site-Name
Mailbox Database Service - Management - test.local
Mailbox Database Service - PublicFolders - test.local
Mailbox Database Service - Users - test.local
Mailbox Many Database Service - Default-First-Site-Name
OfflineAddressBook Service - Default-First-Site-Name
Why is this happening? Since monitoring exchange mailbox databases is one of the most important tasks SCOM should be doing I assume something wrong is going on here. However there are no errors or alerts in SCOM console nor in OpsMgr
log on Exchange server itself.

Hi There,
Did you install the Microsoft Exchange monitoring correletion service while importing the Exchange 2010 management pack ?
Does your MS have RMS Emulator role ? As many alerts in the Exchange 2010 MP are targetted to Root management server class.
Also did you configure Test mailboxex and stuff post Exchange 2010 Import ?
Did you analyse the Ops manager Event logs in the MS and Agent ? Can you post the critical and Warnign events here.
Also is Agent proxy enabled ?
Also is the Action account of the Agents System or Domain account ?
Also refer: http://blogs.catapultsystems.com/jcowan/archive/2013/03/26/opsmgr-2012-and-2007-exchange-server-2010-monitoring-management-pack-how-to-perform-the-optional-configurations-for-synthetic-transactions-and-kerberos-authentication.aspx
Gautam.75801

Party and Service not found

Hi
I am trying to implement IDOC to File scenario following the below blog.
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters:///people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
In config I created
Receiver communication channel
Receiver Agreement
Receiver Determination
Interface Determination
as specified in the blog.
Sender agreement is not required as per the blog.
RFC destination
I created an tRFC port
added partner profile
when I try to test it using transaction code we19
Standard outbound processing
I filled the sender port, partner no and partner name
it asks me for Receiver port which I have no idea what to use?
I used the same port as I used for Sender
When I checked in message monitoring using SXMB_MONI i see the red flag with error as
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PARTY_SERVICE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Party and service not defined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please let me know if I am missing something or going wrong any where.
Thanks
Pavan

Hi,
check out correct business system is associated and pointing to correct R/3 system. Check the Integration Diretcory>Open Business System>Adapter Specific Identifier and check teh logical system name mentioned. Does this point R/3 system ?
just cross verify with steps given in the document, mentioned in my earlier post.
regd. metadata in IDX2, it is not required always.
Go thru these Error Analysis Steps so that you can get to know-
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Rgds,
Moorthy

Where to execute the services? i.e., SICF or SE80

Hi friends,
Can anybody tell me the difference between services created in SICF and the services in SE80.From where i have to execute the services?
I have created a screen-based service in se80 and published the service.
In SICF i have created the sub-element for the same service created in se80.I have done all the settings.and activated the service and tested that service here itself.
But my doubt is once the service is activated in SICF , from where this service should be excuted? ie., either from SICF or from SE80?
Am confusing at this step.please help me out.
Thanks in advance.
Regards
sireesha

Hi,
Kindly go through this webBlog,this wil answer ur Question.
Service Enable Your SAP Application Component
Plz reward Points,if helpful
Thanks and Regards
Santos Saraf

Visual Composer services not found

Hi,
We had configured VC on our dev server. Every alternate day while accessing VC it gives error..
a. VC services not found
b. This product required MSXML Parser 4.0
We had already installed MSXML Parser.
But when we restart the 2 VC services [vcclient & VisualServerEar04Composer] Visual Composer is again accessible....
Can anyone please suggest which will prevent to restart the services again & again..?
Regards,
MS

Hi Mario,
mh...strange.
I used the VC on our old server with my notebook without a problem (great tool!).
Now we have a new server with a new NW 04s SP10 (very fresh installed ) and there I get the "Server Error: Visual Composer services are not found" and "This product requires MSXML Parser v4.0" errors.
Unfortunately I cannot test it on the old server, because it was a interim system.
Regards,
Christian

Services not testing in SICF

Similar Messages

Maybe you are looking for