Services stopping every night

Hi
I´m new to ASE - testing with the purpose of migrating from SQL server... I have recently installed 4 Netweaver systemes (3 java and 1 abap) on a single Windows 2012 server.
Systems are running fine - but every night for some reason the services SAP SQLServer_<SID> are stopped. All i have to do is to start the services and then systems are running fine.
But where can i search to find information of the shot down reason of the services? The SAP Control Center is not the best - actually (compared to SQL server) it´s quite hopeless :-).
Any ideas?

Hi Kiran
Not much info i think:
00:0006:00000:00030:2015/03/22 19:48:20.56 kernel napinsp.dll loaded at 00007FFA59AE0000 [C:\Windows\system32\napinsp.dll]
00:0006:00000:00030:2015/03/22 19:48:20.56 kernel NLAapi.dll loaded at 00007FFA5C640000 [C:\Windows\system32\NLAapi.dll]
00:0006:00000:00030:2015/03/22 19:48:20.56 kernel winrnr.dll loaded at 00007FFA59E30000 [C:\Windows\System32\winrnr.dll]
00:0006:00000:00030:2015/03/22 19:48:20.56 kernel TASK DUMP COMPLETE
00:0006:00000:00030:2015/03/22 19:48:20.56 kernel Now terminating OS thread be8
00:0008:00000:00137:2015/03/22 20:12:00.28 kernel kisignal: unknown signal (-1073741784).
00:0008:00000:00137:2015/03/22 20:12:00.28 kernel LAST CHANCE EXCEPTION HANDLER on OS thread id bf0
00:0008:00000:00137:2015/03/22 20:12:00.28 kernel A SERIOUS UNHANDLED EXCEPTION HAS OCCURRED
00:0008:00000:00137:2015/03/22 20:12:00.28 kernel SERVER MAY NOT BE ABLE TO CONTINUE
00:0008:00000:00137:2015/03/22 20:12:00.28 kernel Exception information:
00:0008:00000:00137:2015/03/22 20:12:00.28 kernel ExceptionCode: c0000028
00:0008:00000:00137:2015/03/22 20:12:00.28 kernel ExceptionFlags: 1
00:0008:00000:00137:2015/03/22 20:12:00.28 kernel ExceptionAddress: 00007FFA61483B3C   RtlRaiseStatus+ 0x20
00:0008:00000:00137:2015/03/22 20:12:00.28 kernel Register dump:
00:0008:00000:00137:2015/03/22 20:12:00.28 kernel ebp: 0000000008BCCA40   SymGetSymFromAddr64 error 126
00:0008:00000:00137:2015/03/22 20:12:00.28 kernel eip: 00007FFA61483B3C   RtlRaiseStatus+ 0x20
00:0008:00000:00137:2015/03/22 20:12:00.28 kernel esp: 0000000008BCC940   SymGetSymFromAddr64 error 126
00:0008:00000:00137:2015/03/22 20:12:00.28 kernel Server will now trace currently running tasks:
00:0008:00000:00137:2015/03/22 20:12:00.28 kernel Engine 0 current task: 430022
00:0008:00000:00137:2015/03/22 20:12:00.28 kernel Attempted stack trace of kpid 430022:
00:0012:00000:00138:2015/03/22 20:42:00.28 kernel kisignal: unknown signal (-1073741784).
00:0000:00000:00000:2015/03/23 09:57:51.89 kernel SySAM: Using licenses from: C:\sybase\VM4\\SYSAM-2_0\licenses\SYBASE.lic;C:\sybase\VM4\\SYSAM-2_0\licenses\SYBASE_ASE_DE.lic
00:0000:00000:00000:2015/03/23 09:57:52.56 kernel SySAM: Checked out license for 6 ASE_CORE (2020.1231/permanent/100C 0F04 3F88 1821).
00:0000:00000:00000:2015/03/23 09:57:52.56 kernel This product is licensed to: SAP, for use with SAP Business Applications.
00:0000:00000:00000:2015/03/23 09:57:52.56 kernel Checked out license ASE_CORE
At 19:48 last night i started the services and system where running. Then something happens i can see, but i no idea of what? And i have the same enteies right now and system are running fine...

Similar Messages

Sql reporting services stops every 24 hours for a short time then restarts

I have noticed that recently in sccm 2012 sp1 the sql reporting services stops every morning at 7:58 am and restarts after a minute or two. The only entry in the event logs is when it stops. I don't see anything tied in with it that stops or
starts at the same time and there are no tasks or anything like that which would point to this time frame. I just thought I would throw this out there to see if anyone had any ideas. Usually with something of this nature there are some corresponding
log entries that go beyond the service stopping, but in this case there isn't. Thanks for any help you can provide.

I think I found out what was going on. I approached this from a different angle and was directed to the sql reporting services logs and found information on the reporting web server stopping. Researching that yielded the following information.
It appears that this is a result of the SSRS Web Server recycling the App Domain, which is supposed to be a pretty normal process. In fact, the configuration file for this process defaults to recycling the app domain twice daily. This lines up
with the time frame that the reporting service is stopping. It restarts it in less that two minutes and logs the recyling in the reporting services log twice daily so why I'm not seeing this entry in the event logs twice daily or even every day must
be a timing thing. I think if it takes an extra millisecond or two to recycle the app domain, it dumps an entry into the windows event logs and the sccm component status monitoring.
http://ask.sqlservercentral.com/questions/97176/reporting-web-server-stopped.html

SMB Service Stopping every few days

The SMB Service on my 10.5.6 XServe has developed a habit of stopping at random every few days.
I've found the error in older, archived posts, with no solution.
The only hallmark seems to be that the system.log spits out a line saying "servermgrd: readFile File /Library/Preferences/SystemConfiguration/com.apple.smb.server.plist is not a valid plist" before the smb process terminates.
The other thing is that instead of starting the process again, I have to promote it to PDC and enable Guest Access, as if the plist is deleted (unsurprising if it is corrupt).
Help! Anyone!

We installed our Leopard server on Sunday and today (Tuesday) the SMB service wouldn't allow any new users on.
We had to stop and start it again.
I am wondering if sing this 10.4 fix would work?
http://www.macwindows.com/OSXServer.html#608

My ipad streaming purchased video from itunes stops every few seconds. does not happen with any other streaming video service.

my ipad streaming purchased video from itunes stops every few seconds. This does not happen with any other streaming video service. I have restarted and rebooted already.

I've tried both things, but video still stutters.. Have also tried removing profile, and complete reinstall of firefox.
I'm on 24 Mbit cable and the only user atm. IE and Chrome seems to work without stuttering.
I've having this stuttering every ~5th second, like a small "1/4 sec buffering".

Hi I have this problem that my iPad 4 stops connecting to the wifi at around 9:30 every night

Hi I have this problem that my iPad 4 stops connecting to the wifi at around 9:30 every night but my iPhone 5 and Mac mini still connects to the same wifi network I have called apple support and they had no clue what the problem is, have tried changing the http settings to auto and resetting the network setting on the iPad but no luck so far would appreciate any help thanks josh

One possibility is that there is an allowed time period for access programmed into your WiFi router for the MAC address of your iPad.
What make, model, and version WiFi router do you have?
Another possibility is that you are getting some WiFi interference from a nearby WiFi network which is automatically turning on at 9:30 PM. A nearby home security system could be the culprit.

All Windows VM - Virtual Disk Service start/stop every minute

Dear all
I recently discovered that all my Windows VM's (2003/2008/2008R2) start and stop the virtual disk service:
System Log File:
08:37:27 Virtual Disk Service --> Service started
08:37:27 Service Control Manager --> The Virtual Disk service entered the running state.
08:37:28 Virtual Disk Service --> Service stopped
08:37:28 Service Control Manager --> The Virtual Disk service entered the stopped state.
and i have this entry every minute.
I removed the DVD Drive from the VM but no change. What could be the reason for this? All my physical servers with the same backup program haven't this behavior.
Thanks for any hint
JBAB

Just as a follow up:
Dell know that problem and it will be "fixed" in Version 4.7.
"In releases of the Host Integration Tools previous to V4.6, Auto Snapshot Manager would query the entire system state every time a refresh was performed. In Host
Integration Tools V4.6 Auto Snapshot Manager will query the entire system state only during the initial load. After that ASM uses event notifications to keep itself up to date refreshing only these changed items. However event notifications
aren’t enough, to pick up some application changes Engineering implemented a polling mechanism. The Virtual Disk Service events are a side effect of that polling and are normal and expected.
However while these messages are entirely benign, Engineering understands these message could be a concern as they do fill up the event log and drown out important
events. Changes have been added to the V4.7 release of Auto Snapshot Manager giving the user the ability to control how often these refreshes occur along with the option of disabling automatic refreshes and using just a manual refresh button in the GUI."

TCP services stop working every morning

Hello,
I have a relatively complex problem that has brought me to the limit of
my limited knowledge.
History: I have a BM 3.5 server running on NW 5.0. I am patched. It has
been running for years. I have a linux cluster running qmail. All traffic
from the internal network passes through the cluster and then through BM
to get to the internet (dedicated connection). BM is running NAT (static
and dynamic), firewall and proxy services.
Monday things changed. Now everyday I arrive in the morning and mail is
mounting up on the cluster. If I unload ipflt on BM nothing changes. I
can't telnet to any 25 or 80 port from the mail server. All services stop
that use TCP. I have a squid server in test right now. This server has a
statitic NAT address. That machine (and others) can ping addresses using
DNS on the internet (with ipflt unloaded) but can not browse or send mail.
I am monitoring my internet router (it is outside the BM server) via MRTG
and snmp (UDP) from a machine on the internal network. This does not stop
working.
The proxy on BM continues working perfectly.
Routing has not presented any noticible problem.
Summary: Every morning all TCP services running behind BM stop working.
UDP and ICMP continues. I have unloaded NAT and reloaded to no avail. The
only solution seems to be the restarting of BM. Once I do that everything
starts up again.
How do I trouble shoot a TCP problem on BM? This is probably the oddest
thing I have seen. Quite frankly I'm not sure if it is BM (NAT). This
maybe a basic Netware problem.
Any thoughts would be extremely appreciated.
Brian

Cat and Maximo,
> Let me try to get that straight. Your BM does static NAT for your
> mailserver (and other boxes), and suddenly UDP and ICMP from these
> natted servers through the BM still works, but TCP doesn't?
Yes. That's what it looks like.
> Can you still do TCP *to* the BM from the natted devices when that
> happens? As you say your proxy continues to work, it sounds as if TCP in
> general on the server continues to work, but does it also work from the
> mailserver?
Everyone browsing via BM proxy continues with no interuption.
The mail server can telnet to any other server on the internal LAN but
nothing past BM. DNS continues working for the mail server too.
> If really nothing changed, this might be a (succesful) DOS attack of
> some sort. I wonder if a LAN trace could reveal anything of interest.
Do you mean port scan the BM server?
I know that "nothing has changed" is a loaded statement. The only thing
(that I know of) that has changed relatively recently is the addition of
the Squid server. It has been running behind the BM server for about 3
weeks. Recently I added a filter exception allowing the Squid server to
access higher ports (dyn/tcp).
But, as I noted before, I think removing ipflt should eliminate any
doubts there. Is there some way Squid could be corrupting something there?
The problem was compounded this morning (saturday). I came in today so I
would have the network essentially to myself. But, to my surprise,
everything was ok.
Cat, You're right. This server is no spring chicken. It is an IBM
Netfinity 3000. Its probably 3 or 4 years old (maybe more). I will think
about this as a hardware problem but I just wish the thing would die
altogether and get it over with. :o)
Thanks,
Brian

M451dn wakes us up every night. How do I stop this?

It seems like our m451dn wakes up every night (very late... Around 4am) to run some kind of short, but extremely loud calibration cycle. It seems like its only a few seconds long, but it's loud enough to wake us up from a few rooms away and it's a little scary because it sounds like someone is breaking into the house!
How do I get the printer to stop this? Or at least do it at a reasonable time?
I believe that I'm running the latest firmware.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP LaserJet Pro 100 functioned printer M175nw cleaning every night

I have a
HP LaserJet Pro 100 multifunctionele kleurenprinter M175nw. Runs fine in a wireless network.
The printer is used some times but also a week not at all. After 15 min the printer goes into sleep mode and after two hours or so the device switches off except the green standby light for receiving new wireless jobs.
Problem i have is that nearby every night the printer runs with a lot of noise, in the middle of the night. It looks like he is cleaning the drums or turning the cartridges or the drum. It SOUNDS like he is prepairing for printing but there is no job at all. After a few minutes the device stops and goes back to sleep. I am doiing it also than.
Is this a service property of this machine and can i switch it off? It takes energy and wakes me up!

Hi @jeroegro,
I see that the printer is going into a cleaning mode in the evening and you would like to be able to turn this service off.
I can help you today.
I couldn't find any settings through the printers control panel to turn this service off.
Either turn the printer off manually or you can set the printer to power off after so many hours, through the menus.
Go to Setup, System Setup menu, (wrench button) Energy Settings, Auto Power Down, set the time.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Mac Mini/Mountain Lion sleeps but won't wake up (or crashes) every night.

Hi everybody,
I have a mid-2010 mac mini server on which I recently installed Mountain Lion 10.8.2 (without server stuff).
Every night, it stops responding. The led is on but the display is off and it does not respond to mouse/keyboard. I even tried remote desktop.
The only solution is the power button...
What I already did :
- Reset Pram/Nvram
- Reset SMC
I also took a look at the console and I found a message that is fired just before the machine stops responding.
---- DAY 1 ----
24/09/12 02:03:00,000 kernel[0]: Wake reason: GIGE (Network)
24/09/12 02:03:00,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
24/09/12 02:03:00,000 kernel[0]: Previous Sleep Cause: 5
24/09/12 02:03:01,004 hidd[54]: MultitouchHID: device bootloaded
24/09/12 02:03:01,000 kernel[0]: AppleBCM5701::selectMedium - autoselect, any duplex, flow control allowed
24/09/12 02:03:01,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
24/09/12 02:03:01,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Wake reason GIGE - bonjour - service connect
24/09/12 02:03:01,141 configd[18]: network changed: v4(en0-:192.168.0.100) v6(en0-:fe80::224:d4ff:feb4:22f1) DNS- Proxy- SMB
24/09/12 02:03:01,146 mDNSResponder[46]: DeregisterInterface: Frequent transitions for interface en0 (192.168.0.100)
24/09/12 02:03:02,000 kernel[0]: Graphics suppressed 1944 ms
24/09/12 02:03:02,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [79ed,2301,0de1,0300,41e1,0000]
24/09/12 02:03:02,599 configd[18]: network changed: v4(en0+:192.168.0.100) DNS+ Proxy+ SMB
24/09/12 02:03:02,607 mDNSResponder[46]: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:C62C:03FF:FE0C:F227)
24/09/12 02:03:02,608 mDNSResponder[46]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.0.100)
24/09/12 02:03:02,617 configd[18]: network changed: v4(en0:192.168.0.100) v6(en0+:fe80::224:d4ff:feb4:22f1) DNS! Proxy SMB
24/09/12 02:03:32,209 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fe119e220d0> Mon Sep 24 02:07:26 2012 CEST (approx)
24/09/12 02:03:32,210 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fe119e220d0> Mon Sep 24 02:07:26 2012 CEST (approx)
24/09/12 20:13:29,000 bootlog[0]: BOOT_TIME 1348510409 0
---- DAY 2 ----
24/09/12 23:24:09,000 kernel[0]: Wake reason: GIGE (Network)
24/09/12 23:24:09,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
24/09/12 23:24:09,000 kernel[0]: AirPort_Brcm43xx::checkInterfacePowerState: Check _pwrOffThreadCall!
24/09/12 23:24:09,000 kernel[0]: Previous Sleep Cause: 5
24/09/12 23:24:09,994 hidd[45]: MultitouchHID: device bootloaded
24/09/12 23:24:10,000 kernel[0]: AppleBCM5701::selectMedium - autoselect, any duplex, flow control allowed
24/09/12 23:24:10,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
24/09/12 23:24:10,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Wake reason GIGE - bonjour - service connect
24/09/12 23:24:10,000 kernel[0]: Graphics suppressed 1135 ms
24/09/12 23:24:10,154 configd[17]: network changed: v4(en0-:192.168.0.100) v6(en0-:fe80::224:d4ff:feb4:22f1) DNS- Proxy- SMB
24/09/12 23:24:10,166 mDNSResponder[37]: DeregisterInterface: Frequent transitions for interface en0 (192.168.0.100)
24/09/12 23:24:11,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [79ed,2301,0de1,0300,41e1,0000]
24/09/12 23:24:11,520 configd[17]: network changed: v4(en0+:192.168.0.100) DNS+ Proxy+ SMB
24/09/12 23:24:11,532 mDNSResponder[37]: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:C62C:03FF:FE0C:F227)
24/09/12 23:24:11,533 mDNSResponder[37]: mDNS_RegisterInterface: Frequent transitions for interface en0 (192.168.0.100)
24/09/12 23:24:11,543 configd[17]: network changed: v4(en0:192.168.0.100) v6(en0+:fe80::224:d4ff:feb4:22f1) DNS! Proxy SMB
24/09/12 23:24:40,684 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fb5d1e11910> Mon Sep 24 21:41:51 2012 CEST (approx)
24/09/12 23:24:40,684 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fb5d1e11910> Mon Sep 24 21:41:51 2012 CEST (approx)
25/09/12 19:03:47,000 bootlog[0]: BOOT_TIME 1348592627 0
---- DAY 3 ----
26/09/12 05:33:54,000 kernel[0]: Wake reason: RTC (Alarm)
26/09/12 05:33:54,000 kernel[0]: RTC: Maintenance 2012/9/26 03:33:53, sleep 2012/9/26 01:34:04
26/09/12 05:33:54,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
26/09/12 05:33:54,000 kernel[0]: AirPort_Brcm43xx::checkInterfacePowerState: Check _pwrOffThreadCall!
26/09/12 05:33:54,000 kernel[0]: Previous Sleep Cause: 5
26/09/12 05:33:54,000 kernel[0]: AppleBCM5701::selectMedium - autoselect, any duplex, flow control allowed
26/09/12 05:33:55,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
26/09/12 05:33:55,175 hidd[46]: MultitouchHID: device bootloaded
26/09/12 05:33:56,000 kernel[0]: Graphics suppressed 2444 ms
26/09/12 05:33:56,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [79ed,2301,0de1,0300,41e1,0000]
26/09/12 05:33:56,534 configd[17]: network changed: v4(en0-:192.168.0.100) v6(en0-:fe80::224:d4ff:feb4:22f1) DNS- Proxy- SMB
26/09/12 05:33:56,645 com.apple.time[11]: Next maintenance wake [Backup Interval]: <date: 0x7fafe2e16a80> Tue Sep 25 20:31:50 2012 CEST (approx)
26/09/12 05:33:56,646 com.apple.time[11]: Requesting maintenance wake [Backup Interval]: <date: 0x7fafe2e16a80> Tue Sep 25 20:31:50 2012 CEST (approx)
26/09/12 05:33:56,686 configd[17]: network changed: v4(en0+:192.168.0.100) v6(en0+:fe80::224:d4ff:feb4:22f1) DNS+ Proxy+ SMB
26/09/12 05:34:01,000 kernel[0]: Sandbox: sandboxd(671) deny mach-lookup com.apple.coresymbolicationd
26/09/12 19:04:50,000 bootlog[0]: BOOT_TIME 1348679090 0
Any clue ?

Hi, I'm quite interested by your issue, because i get the exact same one.
On my mini (late 2012), system doesn t wake up from sleep if it has slept for more than 1 hour.
In fact I get the exact same message as you get in your console.
When I try and wake up system before the programmed maintenance wakeup, it wakes up fine.
But as soon as this programmed time has passed, it just won t wake up, I have to force switch it off via the power button and restart it.
I have nothing plugged on my mini except : AC - Thunderbolt display, and LAN connected to my freebox.
Do you still have the issue or is it ok now for you ?
I'll try in the upcoming days to plug the freebox in the thunderbolt display's adapter instead of the macmini's rj45.

How to defrag after Shrinking the data and log every night

OK, my shop has a shrink job that runs every night. It shrinks the data and log files. DBCC SHRINKFILE (filename,1). We have recovery model Simple.
So reading that SHRINK is horrible for the data file because of fragmentation, so looking to stop the daily job. BUt this job has been running everyday for years right after the ETL. We have a big nightly ETL process that (1) truncates several
hundred SQL tables and then BULK INSERT from the AS400 (2) for really large tables we just bring in the last X number of days from the AS400 and insert those records into the SQL table. We have very few indexes, but do have some on the really
large tables. FYI - The SQL Servers are at the clients' sites.
What kind of fragmentation has the SHRINK on the data file caused? how would it affect the ETL, and retrieval of data during the day? how can the fragmentation be fixed?

Hello,
Databases suffer from fragmentation on indexes as explained
here, but they suffer from physical fragmentation at the storage level also.
When the shrinking process shrinks a data file and recover space from the disk and the data file needs to grow again as part of your ETL process the new portion of the data file will rarely be contiguous to the rest of the data file on disk, and if this
shrink process happens many times, the data file may be spread among many tracks on the disk. This increases the disk requests required to write data on a fragmented data file and increases disk requests to create new data files. In general, fragmentation
will originate that what should be a simple I/O request has to be broken on many disk requests, making disk activity and performance less predictable and making disk queues larger.
My suggestion is to stop sql server services during maintenance window, defragment disk using the Windows Defrag tool or a third party tool, when finish start SQL Server services again, then defrag indexes on your databases.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Imap service stopping at random

Hi,
We're running NSMS 4.15 on WinNTAS v4 sp6a. Every once in a while the imap service will exit. Nothing in the NT event logs or the NS IMAP logs. I set the logging mode to debug and there doesn't appear to be any more information in the log than before. The problem seems to not be related to load as it has happened at various times of the day (and night). Support has told us to reconstruct the mail folders which I did on Sunday with imap, pop, smtp, and http all off. Only store was running. On Tuesday the service stopped in the middle of the morning.
Any ideas out there?
tia, al

Hi!
I hade the same problem with IMAP. It seems that some mailbox has problem. One message in inbox or other folders could be case of problem.
1- If you look at the log files you can find account, which has problem. Normally, account before the message ?Messaging Server IMAP4 4.15 ? starting up? in the log file.
2- Log on with this account and find out the mail folder (inbox, sent box or other) that makes IMAP goes down. If inbox has problem the server goes down when you log on or synchronize the inbox.
3- Find out which message has problem. You may create a new folder and move the messages there to find out the problem message. Delete the problem message and run reconstruct for folder.

BT Infinity Lack of Connection EVERY night!

We had BT Infinity installed on 10 April and the following day went on holiday for a week. When we returned we found we cannot load any web pages from around 8.30pm every night and the problem is still there in the morning. We have one wired connection (to my PC) and one laptop connected wirelessly as well as two Android phones connected wirelessly. We won't stream or upload anything, we just browse the web, social media etc. I complained to BT and they have been no help whatsoever. I was told I would get a call from them at certain times several times, and they never phoned during the agreed times, only at times when I was out at work or at appointments. Today finally someone called and spoke to my partner, and he told us off for restarting the Home Hub 5 because "your line is shrinking" (what? Sounds made up if anything ever did). That was all he advised. Problem is, if we don't restart the Home Hub, we cannot use the internet - I have tried leaving it on and if I do it just remains constantly unuseable. When this happens, the lights all stay on, and the computer says I am connected, but if I try to load any web pages there is just a 'hang' and a blank screen. Nothing happens. The man my partner spoke to wouldn't even consider refunding us for us all the money we've paid for a non operational service, just told us to leave the router alone which means no internet at all! Does anyone actually have any solutions about this? I am looking for a new service provider as BT are absolutely appalling and I seriously cannot believe they said such stupid things on the phone as "Are you unplugging the router at night?" when I've had 'normal' broadband from them for years and years - BT do not treat your customers as if they are stupid!!

05:57:13
27 Apr. Receive a DHCP request
05:47:09
27 Apr. 2.4G Client diassociate from cc:c3:ea:66:04:9b (IP=192.168.1.81) RSSI=-71
Rate=26 Mbps
05:46:07
27 Apr. Tunnel is up
05:46:04
27 Apr. Receive a DHCP request
05:46:00
27 Apr. Receive a DHCP request
05:45:57
27 Apr. Receive a DHCP request
05:45:56
27 Apr. Device Disconnected: 192.168.1.81
cc:c3:ea:66:04:9b
05:45:55
27 Apr. 2.4G Client diassociate from cc:c3:ea:66:04:9b (IP=192.168.1.81) RSSI=-60
Rate=65 Mbps
04:51:04
27 Apr. Device Connected: 192.168.1.154
14:74:11:de:b6:d8
04:51:04
27 Apr. DHCP Lease issued 192.168.1.154 to 14:74:11:de:b6:d8 BLACKBERRY-31A3
lease duration is 86400 seconds
04:51:04
27 Apr. 2.4G Client associate from 14:74:11:de:b6:d8 (IP=192.168.1.154) RSSI=-37
Rate=6Mbps
04:51:03
27 Apr. Receive a DHCP request
04:50:58
27 Apr. Device Connected: 192.168.1.81
cc:c3:ea:66:04:9b
04:50:58
27 Apr. 2.4G Client associate from cc:c3:ea:66:04:9b (IP=192.168.1.81) RSSI=-34
Rate=1Mbps
04:50:57
27 Apr. Receive a DHCP request
04:50:54
27 Apr. Device Disconnected: 192.168.1.81
cc:c3:ea:66:04:9b
04:50:54
27 Apr. 2.4G Client diassociate from cc:c3:ea:66:04:9b (IP=192.168.1.81) RSSI=-33
Rate=65 Mbps
04:50:14
27 Apr. Device Connected: 192.168.1.81
cc:c3:ea:66:04:9b
04:50:12
27 Apr. 2.4G Client associate from cc:c3:ea:66:04:9b (IP=192.168.1.81) RSSI=-34
Rate=6Mbps
04:50:11
27 Apr. Receive a DHCP request
04:50:05
27 Apr. 2.4G WiFi auto selected channel 11 Bandwidth:20M(Reason:boot)
04:50:03
27 Apr. CWMP: HDM socket closed successfully.
04:50:03
27 Apr. CWMP: HTTP authentication success from pbthdm.x.x.x
04:50:03
27 Apr. CWMP: HDM socket opened successfully.
04:50:03
27 Apr. CWMP: session completed successfully
04:50:03
27 Apr. CWMP: HDM socket closed successfully.
04:50:03
27 Apr. CWMP: HTTP authentication success from pbthdm.x.x.x
04:50:02
27 Apr. CWMP: HDM socket opened successfully.
04:50:01
27 Apr. CWMP: HDM socket opened successfully.
04:50:01
27 Apr. 2.4G WiFi scan(Reason:boot)
04:50:00
27 Apr. CWMP: Server URL: https://pbthdm.x.x.x; Connecting as user: ACS username
04:49:59
27 Apr. CWMP: Session start now
server: pbthdm.x.x.x
04:49:59
27 Apr. CWMP: Initializing transaction for event code 1 BOOT
04:49:59
27 Apr. Device Disconnected: 192.168.1.81
cc:c3:ea:66:04:9b
04:49:57
27 Apr. Device Connected: 192.168.1.81
cc:c3:ea:66:04:9b
04:49:56
27 Apr. 2.4G Client diassociate from cc:c3:ea:66:04:9b (IP=192.168.1.81) RSSI=-33
Rate=58 Mbps
04:49:55
27 Apr. Device Connected: 192.168.1.71
c0:3e:0f:1d:81:35
04:49:54
27 Apr. 5G Client associate from c0:3e:0f:1d:81:35 (IP=192.168.1.71) RSSI=-59
Rate=216Mbps
04:49:51
27 Apr. Receive a DHCP request
04:49:50
27 Apr. Receive a DHCP request
04:49:46
27 Apr. Receive a DHCP request
04:49:35
27 Apr. Device Disconnected: 192.168.1.71
c0:3e:0f:1d:81:35
04:49:32
27 Apr. 5G Client diassociate from c0:3e:0f:1d:81:35 (IP=192.168.1.71) RSSI=-59
Rate=243 Mbps
04:49:30
27 Apr. NTP synchronization success
04:49:15
27 Apr. NTP synchronization start
04:49:13
27 Apr. 2.4G WiFi auto selected channel 11 Bandwidth:20M(Reason:boot)
04:49:12
27 Apr. WAN connection PTM connected
04:49:11
27 Apr. PPP IPCP Receive Configuration ACK
04:49:11
27 Apr. PPP IPCP Send Configuration Request
04:49:11
27 Apr. PPP IPCP Receive Configuration NAK
04:49:11
27 Apr. PPP IPCP Send Configuration ACK
04:49:11
27 Apr. PPP IPCP Receive Configuration Request
04:49:11
27 Apr. PPP IPCP Send Configuration Request
04:49:10
27 Apr. PPP CHAP Receive success : authentication successful
04:49:10
27 Apr. PPP CHAP Receive Challenge
04:49:10
27 Apr. PPP LCP Receive Configuration ACK
04:49:10
27 Apr. PPP LCP Send Configuration ACK
04:49:10
27 Apr. PPP LCP Receive Configuration Request
04:49:10
27 Apr. PPP LCP Send Configuration Request
04:49:08
27 Apr. 2.4G WiFi scan(Reason:boot)
04:49:08
27 Apr. 5G WiFi auto selected channel 36 Bandwidth:80M(Reason:boot)

A135-S4527 Host Process for Windows Services stopped...

I have started getting a Windows error: Host Process for Windows Services stopped working and was closed. Laptop runs fine except my network connection says Connection Status: Unknown The service to detect this status is turned off and McAfee stopped working. Can't run any of the MS tools either. I am suspicous of conficker e but don't know how to detect or remove it. Have seen the b variant on an XP machine at work, but the tools we used on it don't work on Vista.
I am running Vista Home Edition (came on Laptop) upgraded to SP1 with auto-updates on. McAfee was also set for auto-updates and nightly full scans, active e-mail and internet scanning. No recent software downloads except for updates.
Have been having the issue since about April 28. Tried to restore but no dates exist past May 5. Tried the F8 Startup recovery no problems found. Have tried restarting services but they quickly stop again. Uninstalled McAfee and tried AVG. It allowed defintion updates and I scanned all files. No viruses, trojans or malware detected.
Any suggestions? I have a tasklstserv file I can copy and paste if it will help.

That's a bad-sector event. At a command prompt (cmd.exe), run chkdsk /r.
Event ID 7 Source Disk
But it doesn't seem likely that's the cause of the message. When you get another one, note the time and check the Application and System logs for entries at that exact time.
Thanks for the detailed information.
What virus protection do you use?
-Jerry

Skype 7.3 crashing around same time every night

Skype has been crashing every night, right before I go to bed Skype.exe ends up consuming almost 2GB of memory for some reason, at around the same time every night, and there are constant errors that Skype is out of memory, and it eventually stops responding completely until I end the process.
Running Windows 7 64bit with the latest updates installed, and Skype 7.3 latest build. Screenshot attached.
Attachments:
2015-04-14 02-13-29.jpg ‏23 KB

It really can't be any other software or hardware changes, as no changes have been made at all since the Skype update which caused this issue to start occuring.
As this particular system and user account are locked down and used almost exclusively just for Skype by an elderly retired person who runs no other applications, and has made no other changes to the system within that time that Skype has been updated and this issue has started occuring.
The Skype window remains open after they launch it in the morning, without minimizing it or using any other applications which could potentially interfere.
Considering the user is an elderly person with limited computer knowledge, when this issue occurs they are unable to recover the system themselves from its non responsive state, requiring intervention by us fix it on a nightly basis which is less than ideal for us, and them.

Services stopping every night

Similar Messages

Maybe you are looking for