Services that can't use Order on Behalf

Services that can't use Order on Behalf
Hi - does anyone know if there is a way to exclude specific services from using Order on Behalf?

Hi Wendy,
This use case can be handled by creating an AFC Conditional Rule that is triggered with the onLoad and onSubmit events. Please see below for the sample conditional rule:
Type:

Similar Messages

What service provider can you use with iphone that you buy at Apple

What service provider can I use with an iphone I buy at the apple store?

Verizon, AT&T, Sprint, or T-Mobile.

System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

Greetings
                                    - Our critical server image backup Fails on one
server -
Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
partition on each source hard drive is not included.
Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
Server A good.
Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
"The system image restore failed. (0x80042403)"
The destination drive is Not "Excluded".
Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
Tried the earliest dated B image rather than the most recent, fail.
The Server B backups show as "Success" each night.
Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
Restore still fails.         It looks like its to do with the image rather than with the hardware.
Tried unticking "automatically check and update disk error info", still fail.
Server A SRP 100MB C: 50.6GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Server B SRP 100MB C: 102GB on Seagate ST3500418AS 465.76GB Microsoft driver 6.1.7600.16385   write cache off
Restore-to hard drive is also Seagate ST3500418AS.
http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
"If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring." Doesnt apply here.
http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
Thank you so much.

Hello,
1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
correct order in the hardware.
4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline.
5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
should be present with minimum size requirement.
6. Some other requirements are discussed in following newsgroup threads:
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
Regards,
Vikas Ranjan [MSFT]
------- This information is provided as-is without any warranties, implicit or explicit.-------

Is there a limit to no. of summary fields that can be used in a cross tab?

Hi,
While creating a cross tab is there a limitation to number of summarized fields that can be used?
- The cross tab when uses 184 fields as summary fields leads to Crystal report application to crash at the time of export to excel.
- Tried with two Datasources: XML and excel
- If we reduce the number of summary fields used to 102 exactly, export works fine in excel.
- If 2 cross tabs are used each containing 92 summary fields(in order to show 184) export to excel works fine.
Please let me know if there is any such limitation which leads to CR application to crash when exporting in excel?
Thanks
Regards,
Nidhi

I suggest you purchase a case and have a dedicated support engineer work with you directly:
http://www.sdn.sap.com/irj/boc/gettingstarted
Or
http://store.businessobjects.com/store/bobjects/Content/pbPage.CSC_map_countyselector/pgm.67024400?resid=jFmmLgoBAlcAAALO-iYAAAAP&rests=1278687224728
If this is a bug you'll get a refund, if not post your enhancement request in the Idea Place. Or the Rep will suggest a better way to create your report.

SQL ENTERPRISE: The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database

The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?

Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

The feature: "The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.

Hello all,
I have SQL express 2014 advance edition installed ..
and i am connecting SQl server 2008 r2 instance which is in network
while creating datasource in Reportserver which has Express installed ..
got this error ..
please help me how to connect to remote server
Dilip Patil..

Error message says it all.
With SQL Express, Data source should be local SQL DB.
With SQL Enterprise, Standard, BI edition, you can create Data soruce which are hosted on other servers.
Please refer similar thread:
https://social.msdn.microsoft.com/Forums/en-US/c0468e3f-bad7-47a7-a695-75c13762280a/the-feature-the-edition-of-reporting-services-that-you-are-using-requires-that-you-use-local-sql?forum=sqlreportingservices
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP]

What component is included with Microsoft SQL Servers that can be used to perform a broad range of data migration tasks?

What component is included with Microsoft SQL Servers that can be used to perform a broad range of data migration tasks?
a. Full Text Search service
b. SQL Notification Server
c. SQL Reporting Server
d. SQL Server Integration Services

d.
Are you having a test and trying to cheat?
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Publish service that can import more than comments back to LR?

Hi
Is there a pulish service that can import things like ratings, keywords, flags etc. (i.e. other than comments) back to LR? I am looking for such a plugin, since I would like to publish a collection to a service, and then use my iPad (or allow anyone else) to tag/rate etc. my photos and then import the new data back to LR for later processing. Ideally I would like to do this with flags (like pick and reject) and ratings and keywords
Henrik

iPhoto syncs to Facebook (and Flickr, MobileMe). So, make a change on one place it changes the other.
You want an uploader, not a sync, so forget about using iPhoto for the job - it's just not the tool you want for the job.
Regards
TD

How can i use Order by inside a sub query in Oracle

Hi!,
Please help me, it's an urgent... how can i use Order by clause
SELECT SalesProductKeyID,ActualUnitPrice,BillDateKeyID,ProductKeyID
,Qty,Profit,DD.dDate
, (SELECT nvl(S.Qty,0) FROM Stock S , DateDimension DD1
WHERE S.DateKeyID = DD1.DateKeyID AND
S.ProductKeyID = SF.ProductKeyID AND
DD1.dDate <= DD.dDate and rownum=1
ORDER BY DD1.dDate DESC*) as StockQty
, (SELECT nvl(SUM(Qty),0) from salesfact SF2,DATEDIMENSION DD2
WHERE SF2.BillDateKeyID=DD2.DatekeyID AND SF2.ProductKeyID=SF.ProductKeyid
AND DD2.dDate > DD.dDate
AND DD2.dDATE=DD.dDate
) as TotalQtySold
FROM SalesFact SF INNER JOIN DATEDIMENSION DD
ON SF.billdatekeyid =DD.Datekeyid
WHERE
IsProfitCalculated = 1 AND
IsSalesFactSuppPopulated =0 AND
Qty > 0;
kindly help
Thank you.

Actually I'm converting Procedures from SQL Server to Oracle.
Actual Stored Procedure in SQL Server is as follows.
SELECT --top 10000
SalesProductKeyID,ActualUnitPrice,BillDateKeyID,ProductKeyID
,Qty,Profit,DD.Date
, (SELECT TOP 1 ISNULL(S.Qty,0) FROM dbo.Stock S , dbo.DateDimension DD1
WHERE S.DateKeyID = DD1.DateKeyID AND
S.ProductKeyID = SF.ProductKeyID AND
DD1.Date <= DD.Date
ORDER BY DD1.Date DESC) as StockQty
, (SELECT ISNULL(SUM(Qty),0) from salesfact SF2,DATEDIMENSION DD2
WHERE SF2.BillDateKeyID=DD2.DatekeyID AND SF2.ProductKeyID=SF.ProductKeyid
AND DD2.Date > DD.Date
AND DD2.DATE=DD.Date
) as TotalQtySold
--INTO TEMP_Salesfact
FROM dbo.SalesFact SF INNER JOIN DATEDIMENSION DD
ON SF.billdatekeyid =DD.Datekeyid
WHERE
IsProfitCalculated = 1 AND
IsSalesFactSuppPopulated =0 AND
Qty > 0

When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified. Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified. Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

The only limit is that of the device. No restrictions on how much of it you can use for music. Is part of your music library unchecked?
tt2

What format i should use for my external hard drive that can be used interchangeably between mac and pc?

What format i should use for my external hard drive that can be used interchangeably between mac and pc?

Usually Fat32/MS-DOS as mentioned, but that has several limitatiuns, like 4GB filesize limit.
One option is MacDrive for you PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/
More options...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930

Is there any way to an index that can be used to include the "OR condition "?

Hello I have some questions.
The test was conducted in the following procedure .
create table test
c1 varchar2(10),
c2 varchar2(10),
primary key(c1)
create index test_idx1 on test(c2);
Command> explain select * from test where c1 = 'AAAAAAAAAA' or c2 = 'AAAAAAAAAA';
Query Optimizer Plan:
STEP:                1
LEVEL:               1
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST
INDEXED CONDITION:   <NULL>
NOT INDEXED:         TEST.C2 = 'AAAAAAAAAA' OR TEST.C1 = 'AAAAAAAAAA'
Command>
Command> explain select * from test where c1 = 'AAAAAAAAAA' and c2 = 'AAAAAAAAAA'
Query Optimizer Plan:
STEP:                1
LEVEL:               1
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST
INDEXED CONDITION:   TEST.C1 = 'AAAAAAAAAA'
NOT INDEXED:         TEST.C2 = 'AAAAAAAAAA'
Command>
By including the "OR condition " in this test does not use the index.
Is there any way to an index that can be used to include the "OR condition "?
Thanks.
GooGyum.

A database cannot in general use indexes in this way for an 'or' involving two different columns. However, for this specific example one can easily rewrite the query using 'UNION' to use the relevant indexes while still giving the same (correct) result:
Command> explain select * from test t1 where t1.c1 = 'AAAAAAAAAA' union select * from test t2 where t2.c2 = 'AAAAAAAAAA';
Query Optimizer Plan:
STEP:                1
LEVEL:               1
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST
INDEXED CONDITION:   T1.C1 = 'AAAAAAAAAA'
NOT INDEXED:         <NULL>
STEP:                2
LEVEL:               2
OPERATION:           RowLkRangeScan
TBLNAME:             TEST
IXNAME:              TEST_IDX2
INDEXED CONDITION:   T2.C2 = 'AAAAAAAAAA'
NOT INDEXED:         <NULL>
STEP:                3
LEVEL:               1
OPERATION:           OrderBy
TBLNAME:             <NULL>
IXNAME:              <NULL>
INDEXED CONDITION:   <NULL>
NOT INDEXED:         <NULL>
STEP:                4
LEVEL:               2
OPERATION:           UnionMergeSort
TBLNAME:             <NULL>
IXNAME:              <NULL>
INDEXED CONDITION:   <NULL>
NOT INDEXED:         <NULL>
Maybe you can apply a similar trick? If you know there is no possibility of duplicate rows then you can further optimise this (in terms of performance) by using UNION ALL.
Chris

Is there a list of Unicode characters that can be used in Acrobat bookmarks?

I can add Greek characters to Acrobat bookmarks using hexadecimal strings. For example, to print a lower case gamma symbol I use <FEFF03B3>. FEFF is the required Unicode flag and 03B3 is the Unicode code for gamma. This works fine. However, there are no Unicode entries for greek characters in the PDF 32000-1:2008 PDF Specification manual. Table D.2 - PDFDocEncoding Character Set on page 656 lists Unicode characters and these also work when added to bookmarks but no Greek codes are in this table. Since I can sucessfully use Greek Unicode characters in the range of 0x0391 - 0x03CE and these characters are not listed in the PDF manual I am assuming there are additional Unicode character that will work in bookmarks. Therefore, I am looking for a complete list of Unicode characters that can be used in Acrobat's bookmarks. Does such a list exist?

Thank you for the response.
I'm sorry to hear there is no list available. I'm building the Acrobat bookmarks automatically. The input data contains entity codings (for example, a lower case Greek gamma is coded as γ) and I was hoping to be able to just pass these through with an automatic conversion to a hexadecimal string (for example <FEFF03B3>). If I had a list of valid Unicode characters, that will display in an Acrobat bookmark, I could validate each entity before the conversion and catch the ones that won't display correctly. I know these types of characters are out there because I have already come across them. For example, a superscript 5 (0x2075) displays fine in MSWord but shows as a white box in a bookmark. Now I'll need to proof the output PDFs and look for white boxes in the bookmarks so that I can build my list of unicode characters that do not work in Acrobat bookmarks.
Again, thanks for your help.

Need to know of a method / process that can be used to send the same msg to all those appearing in my email listings with the same extension after the "@" sign in their address(es) on my macbook [e.g., with "@gov.ca"; Snow Leopard].

Need to know of a method / process that can be used to send the same msg to all those appearing in my email listings with the same extension after the "@" sign in their address(es) on my macbook [Snow Leopard].

If you simply want to send the exact same message to everyone in your address book with emails ending in "@whatever.com", you can do the following:
Create an email with subject, message and attachments but no addresses
Open Address Book, All Contacts
Search in Address Book for @whatever.com
Select the results and drag them into the To: or Bcc: field of the email. If Bcc: then put your email address in the To: field.
Send the email
This will not personalize the emails (such as with "Dear firstname:" at the top of the message) but it will let you send an idential message to everyone who meets your criteria.

Has anyone tried to trade in the their iphone5 for the gift card that can be used to buy iphone6?

Has anyone tried to trade in the their iphone5 for the gift card that can be used to buy iphone6?

csa3, I want to make sure you are able to take advantage of this offer. Have you submitted a Preorder for the iPhone 6? If so, you can submit your appraisal before September 30, 2014 using the following link: http://bit.ly/GGnDDC
AndreaS_VZW
Follow us on Twitter @VZWSupport

Services that can't use Order on Behalf

Similar Messages

Maybe you are looking for