Servies agreement header data

Hi guru
i am uploding servies agreement header data, for t-code me31k, while uploading data i got an error in STEP -> CONVERT DATA .
1)syntax error in program
/1CADMC/SAP_LSMW_CONV_00000066.
2)in include
/1CADMC/SAP_LSMW_CONV_00000066.
in line:27.
For type "C", a maximum length specification of 65535 is allowed.
any one plz guide me how to slove this problem urgently.
venu.T

questions was answered

Similar Messages

JMS Adapter setting the header data of MQ message

Hi All,
I need to set the properties in JMS adapter for setting the header data of MQ message.
JMS_IBM_MQMD_Format = MQFMT_NONE.
Thanks in advance
Ravijeet

Hi All,
I am stuck in a typical XI issue.......I have a scenario where my input to XI is IDoc and output is xml message going to IBM MQ.
The IDoc is sending some chineese character which is fine is SXMB_MONI Integration server and also fine in the payload of message monitoring, so feel the message is going fine from XI to MQ.
But the receiver EDI system which is picking the message from MQ queue says the chinese characters are getting corrupted. They say that you need to set the additional properties in MQ header data
JMS_IBM_MQMD_Format = MQFMT_NONE.
How do I do this in communication channel for jms adapter ? How to I set the MQ header data in jms communication channel ?
Thanks in advance
Ravijeet
Edited by: RAVIJEET DAS on May 12, 2009 8:27 AM
Edited by: RAVIJEET DAS on May 12, 2009 8:27 AM

Using Oracle BI Server as a Data Source for Third Party Tools

I have been researching how to use the Oracle BI Server as a data source for two days now. I have not yet found a solution to my problem.
We have a remote user who is pulling data from one of our Oracle databases using automated tools. This data base is essentially being replaced by Oracle Analytics. However, we do not want this user to get at the physical tables of Analytics, rather, we want the user to be able to connect to the Oracle BI Server itself, and issue Logical SQL to pull data.
Here are the requirements which I need to be fulfilled:
1) The ability for a remote user to connect to the BI Server as a data source.
2) The remote user must be able to do this on a Unix box.
3) The remote user must be able to automate the process of issuing SQL to the BI Server. (Command line interface is preferable)
4) The solution needs to be easily implementable, that is, this solution will be implemented many times over.
I found many articles explaining how to set up a Windows box to connect to the BI Server in this way. However, these articles outline how to use tools like Excel and Microsoft Query to pull data from the BI Server. Our current user is using SQLplus.
If possible, I would like the user to continue using SQLplus as the tool for connecting to and retriving information from our BI Server. I have tested using SQLplus many different ways to no avail. I have also tried using other tools, such as Oracle SQL Developer.
Is there a program out there that will fulfill the needs I have outlined above? Or, does someone know of a way to use SQLplus to connect to the Oracle BI Server as a data source? Or, is there a series of solutions which will fulfill the needs outlined above?
Edited by: user11177366 on Jun 11, 2009 11:46 AM

I agree it would be inefficient but only because you are using OBIEE for something it was not designed to do. You are basically asking for a "DB feed" and that should designed using PL/SQL, DB Links, Web Services or whatever is your entreprise standard to send data from one system to another. Using OBIEE for this seems a bad architecture decision to me.You are correct, the BI Server is not really intended to be queried like another Oracle Database remotely. However, the reason we are trying to do it this way is twofold:
1) We want to enforce data level security.
2) The BI Server has been fine tuned for high performance.
Forcing the end users to go through the BI Server rather than directly to the physical tables or other sorts of systems built on top solves both of these issues.
I think you are wrong. I don't see why SQLPlus should be able to query the BI Server. The BI Server can sit on top of many different DBs not just Oracle, even flat files etc. So you can't really expect the BI Server to able to translate all that into Oracle SQL output so you can query it using SQLPlus. The BI Server is not an Oracle RDBMS.You're right again. The BI Server isn't an Oracle RDBMS, and I have been wanting to treat it like one. From the data I have gathered SQLPlus can't query the BI Server.
However, my research has led me to realize that the BI Server supports the JDBC API. Therefore, (I should have went down this route in the first place) one can use the JDBC driver provided by Oracle (bijdbc14.jar) to interface with the BI Server. There are many programs and applications out there that support the JDBC API and let us connect to BI Server the way we want to. Furthermore, these programs are mostly platform independent, as they are mostly written in Java.
Lastly, from what I understand the NQCMD program can be installed on any platform as well (provided by Oracle). This is another option to connect to the BI Server as well.
Thanks for your help and your comments as I went through this process of discovery.

Repeat Header Data in Siebel BI Publisher Report

Halo All,
I'm very newbie in siebel, and i facing this problem:
I have fields named type, brand and marketing plan.
each type have many brand
each brand have many marketing plan
- the problem is the marketing plan data was loop without brand header data
like : Brand A
Plan 1
Plan 2
i want like : Brand A
Plan 1
-------page break
Brand A
Plan 2
Hope u could help me with this?
Thank you in advance
Edited by: user958190 on Mar 22, 2011 8:36 PM

I am facing a similar issue. I have defined a report with a web service as a data source. I can generate a report (pdf file) from the template in the report, both in the web interface and by calling the BI Publisher WSDL method runReportInSession. Unfortunately the report does not show any data from the data source.
I am defining the RTF templates with the latest version of the Template Builder for MS-Word (version 10.1.3.4.1 build 130), downloaded last week. My MS-Word version is MS-Word 2002 SP3 on a Windows 2003 server (32 bit). The BI Publisher Server runs on the same machine under Tomcat 6.
Two versions of the Template Builder seem to exist. The first version is contained within the BI Publisher server download and the second one is a separate download, both downloaded from the same oracle download page. The sizes of the two installation files are different, the latter file is slightly bigger. Nevertheless the help shows that they both have exactly the same version and build number !
Edited by: ruerd on Apr 27, 2010 2:56 PM

Idoc Receiver - Header Data does not update

Hi there
I have an Idoc receiver in a scenario where I send a Idoc from a file to the R/3 system. My config is all fine but the Idoc status in we19 shows red. My Header data for the idoc is incorrect. The idoc is WALREQ01. In my Message Mapping Im setting the SDNPOR, SDNPRT, SDNPRN, RCVPOR, RCVPRN to the correct values and the I activate the scenario but in we19 it still shows the incorrect idoc header. It does however change the idoc segment data, just not the header. Is there maybe some other place I have to set the Idoc header data?
Thanx,
Jan

Hi Jan,
From help.sap:
Apply Control Record Values from Payload
If you set the indicator, the conversion of communication parties to the IDoc partner is only possible for systems that are not logical systems.
If you do not set the indicator, all combinations of communication parties and services are handled as services without party.
If the IDoc XML structure contains a control record during outbound processing on the Integration Server, it is rejected and created again by the IDoc adapter. If you want to include additional values in the control record, set the indicator and provide an appropriate mapping for the values. See also: Fields of the IDoc Control Record
http://help.sap.com/saphelp_nw04/helpdata/en/13/95244269625633e10000000a155106/content.htm
Carlos

Seeburger AS2 MDN: Reading AS2 Header DATE field

Hello,
in my AS2 scenario (using Seeburger Adapter) I forward MDN messages to PI. Now I have the requirement to read the "DATE" field of the MDN AS2 Header an map it to a target field.
In the XML message monitoring there are two payload messages:
AckReport (application/xml) and
RAWMIMEMDN (application/octet-stream)
In the message RAWMIMEMDN I see the header data and also the DATE field, now the question is, can I use the RAWMIMEMDN somehow to extract the DATE field?
Thank you for your input.

Looks like this: (However I am not sure how to use it in mapping as there are two PAYLOADS entries in SXMB, I have not seen this in any other scenario before, I guess I only have access to the XML part):
AS2-VERSION: 1.2
CONTENT-TYPE: multipart/report; report-type=disposition-notification; boundary="----=_Part_372_22591582.1258028532189"
AS2-TO: xxxxxx
FROM: xxxxxx
CONTENT-LENGTH: 798
AS2-FROM: xxxxx
MIME-VERSION: 1.0
SERVER: xxxxxx
MESSAGE-ID: <xxxxxx>
DATE: Thu, 12 Nov 2009 12:22:12 GMT
EDIINT-FEATURES: CEM
=_Part_372_22591582.1258028532189
Content-Type: text/plain; charset=us-ascii
This MDN (Message Disposition Notification) was automatically built on
Thu, 12 Nov 2009 12:22:12 GMT in response to a message with id
xxxxxx received from
xxxxx on Thu, 12 Nov 2009 12:22:10 GMT.
Unless stated otherwise, the message to which this MDN applies
was successfully processed.
=_Part_372_22591582.1258028532189
Content-Type: message/disposition-notification
Original-Recipient: rfc822; xxxx
Final-Recipient: rfc822; xxxxx
Original-Message-ID: xxxxx
Disposition: automatic-action/MDN-sent-automatically; processed
Received-Content-MIC: fzj1sSC/z3kmTWhfA6NaIQ==, md5
=_Part_372_22591582.1258028532189--

The timesheet creation failed, because of problems with the project I server or with data validation

Hi,
One of my user is facing issue in creating new time sheet,
"The time sheet creation failed, because of problems with the project server or with data validations".
This issue is coming to only few members out of 10000 members.
Note: For the same user, can able to do in other machines. only the problem in his machine. Have ran the office diagnostics, but still the problem persists.
Is any add-on's/any settings need to update in IE. Could any one please help me on how to fix this issue?
Many thanks in advance.

I would check the compatibility settings in IE etc, or try another browser (chrome, safari etc.)
Ben Howard [MVP] | web |
blog | book

F-48 (post vendor down payment:header data)

Hi Experts,
Good Evening to you,
when i was posting F-48 (post vendor down payment:header data) i was getting an error of No Special G/L acct defined for acct type K sp. G/L ind B recon.acct so at that time i went to OBYR and given in Acct type-K SGL Ind-B in that given Recon account and Special GL Account both the numbers but still the erroring is coming. Later i went to FS00 and checked in Control Data that the GL Account the reconciliation account-vendor is already given but still the error is coming.
So if anybody faced the same error means let me know.
Awaiting for your golden replies & points will be assign for useful answers.
Thanks & Best Regards,
KK

Hi Rams,
The problem of "No Special G/L acct defined for acct type K ....." has been rectified when i specify the Special GL A/c in OBYR.
Now the issue is i gave a wrong Sp GL account in OBYR and posted a document later i recongnise that i gave wrong SP GL and went back to OBYR and gave the correct SP GL A/c number. So there was a posting has done earlier 1 document so can you tellme how to change from Old Sp GL to New Sp GL.
Awaiting for your golden reply.
thanks & best regards,
KK.

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

PO/ S.Location and GR msg check box in 'delivery/invoice' tab of header dat

Hi all,
Under which case the below 2 fields are required to b filled while creating a PO apart from making them mandatory fieds in document type settings.
1. GR msg check box in 'delivery/invoice' tab of header data
2. Storage Location data in item details
in me59n, system unable process p.req to PO becoz it is mandatory to fill these two fields.

Hi,
1. GR message check box issues message to the buyer after every the goods receipt against the PO.
Message type has to be configured for this functionality.
2. If you are managing stock of material at storage location level , then you will need to maintain this at PO item level.
Regards,
Maheshwari

It is necessary to create one header data for each file to be sent to CDFS.

hi GUYS
my sce anrio is FILE-XI-PROXY
REQUIREMENT IS
SOURCE FILE                      TARGET FILE WILL BE
H1                                             H1                        H1                    H1
I1                                               I1                         I2                      I3
I2                                                F1                        F1                    F1
I3
F1
It is necessary to create one header data for each file to be sent to TARGET. Each file will be related to only one SAP Company Code.
Thanks
NAG

aa

How to display text value in the header data (Header text) of credit memo

Hi...
I need to display the text value of the text field in the header text of the header data in credit memo.
The text values are stored in a ztable and i need to display it based on the billing document stored in vbrk (zfield) that was inserted during the creation of credit request..
Appreciate your help on how to do this...
Thansk and will surely reward the points..
Kanthi..

Hi kanthi ,
Read the value from Z Table and during the creation of cedit memo check out for some exit where u the value from The zTABLE AND use function module SAVE_TEXT with object and id in the header text .
Please award if useful.

SSRS 2008 R2 - Dynamic header data stays the same when exporting

Background:
I have a SSRS 2008 R2 report with a single Tablix.
The data is grouped by InvoiceID, with each appearing on a separate page.
I'm displaying some of the detail data in the group header row using Expressions similar to the following:
="Invoice # " & ReportItems!InvoiceID.Value"
The data referred to by my ReportItems statements are all hidden in the detail row (Advanced Mode, the Hidden Value for the Static Row Group is set to false).
Problem:
When I Preview the report in Visual Studio, everything looks as it should - the dynamic header data changes correctly with each group.
However, whenever I export the results (I've tried all the formats), the header data is the same for every group - its taking the values from the first group and using it in all the groups.
I've copied the same expressions into my Totals row, and the data is correct when exported; its only happening in my header rows.
Any help in resolving this is greatly appreciated, thank you.

Hi Alex,
According to your description, you have a header with expression contains ReportItems. Now you find it shows incorrect result when exporting to a file. Right?
In Reporting Services, it has reported some similar issue that the ReportItem returns unexpected result when exporting. In this scenario, since you just want to show the group name in each page as a header for detail rows. So you can make the
detail rows group on the Group. Then delete the Group column but still keep the group. After that add a row above detail row (Out side of group) and put in "=Fields!InvoiceID.Value". Now it will show the corresponding Group name
when you set page break between each group instance. We have tested this case in our local environment. Here are screenshots for your reference:
Reference:
SSRS
field expressions using ReportItem refrences have unexpected results when exporting
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

To create a new file in application server and transfer data to ti

i am doing the following where i have to create a new file in application server and transfer data to tht file from an internal table.but its saying file cant be opened.the path i am giving to parameter p_prefil is /tmp/prachi.txt.
wats the prob..can anyone help.
DATA:L_WA_FINAL TYPE TY_FINAL,
l_wa_string type string.
OPEN DATASET P_PREFIL FOR OUTPUT IN text mode encoding default.
if sy-subrc <> 0.
write: ' file cannot be opened'.
stop.
endif.
LOOP AT P_I_FINAL INTO L_WA_FINAL.
move l_wa_final to l_wa_string.
TRANSFER l_wa_string TO P_PREFIL.
if sy-subrc <> 0.
write: 'file can not be written'.
stop.
endif.
clear l_wa_final.
ENDLOOP.
CLOSE DATASET P_PREFIL.
if sy-subrc <> 0.
write: ' file cannot be closed'.
stop.
endif.

DATA:L_WA_FINAL TYPE TY_FINAL,
l_wa_string type string.
OPEN DATASET P_PREFIL FOR OUTPUT IN text mode encoding default.
if sy-subrc ne 0.
write: ' file cannot be opened'.
stop.
endif.
LOOP AT P_I_FINAL INTO L_WA_FINAL.
move l_wa_final to l_wa_string.
TRANSFER l_wa_string TO P_PREFIL.
write: 'file can not be written'.
clear l_wa_final.
ENDLOOP.
CLOSE DATASET P_PREFIL.
if sy-subrc ne 0.
write: ' file cannot be closed'.
stop.
endif.

BADI ME_PROCESS_PO_CUST for changing header data

Hello Experts,
I'm using Method PROCESS_HEADER in Badi ME_PROCESS_PO_CUST in order to change some header data.
I want to change header data depending on the partner data which are on header level.
It works fine as long as there are data changed in the header or item level and not only on the partner screen.
The method in this Badi isn't processed if only partner data are changed. But for me it is necessary to set a special field on the header depending on the partner data.
Regards,
Sven

Hi,
Firstly, for changing Header data without any INSERT/UPDATE?MODIFY statement, badi - ME_PROCESS_PO_CUST will not be useful.
As method you mentioned has no header parameters under CHANGING / EXPORTING clause.
You can use the badi which has the parametrs you want in either change/ Export mode. It can be defined under table also.
Below is the list of important badis gettign called, however none of them contains header values in change/export clause.
ME_CCP_ACTIVE_CHECK
MD_STOCK_TRANSFER
ME_DEFINE_CALCTYPE
ME_PO_PRICING
ME_FIELDSTATUS_STOCK
ME_COMMITMENT_STO_CH
ME_COMMITMNT_PARKING
ME_INFOREC_SEND
ME_CHECK_SOURCES
ME_PURCHDOC_POSTED
Instead you can use enhacement MM06E005 Customer fields in purchasing document.
Create a project under Transaction CMOD.
Assign enhancement as Project component.
You'll find Exit 012. At time of save you can change header im_ekko based on you parterner data tab.
Regards,
Amee.

Servies agreement header data

Similar Messages

Maybe you are looking for