Servlet failed with ServletException occurs the first time I try to access a jsp
Can any one tell why this exception occurs the first time I try to
access a jsp. After the first time it doesn't occur. This happens only
on solaris platform.
Thanks,
Shankar.
Fri Jul 28 15:02:51 PDT 2000:<I> <ListenThread> Adding address:
192.168.0.36/192.168.0.36 to licensed client list
Fri Jul 28 15:02:51 PDT 2000:<I> <ServletContext-General> file: init
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: init
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: param
verbose initialized to: true
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: param
packagePrefix initialized to: jsp_servlet
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: param
compileCommand initialized to: /usr/bin/javac
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: param
srcCompiler initialized to weblogic.jspc
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: param
superclass initialized to null
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: param
workingDir initialized to: /space/shankar/weblogic/myserver/classfiles
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp: param
pageCheckSeconds initialized to: 1
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> *.jsp:
initialization complete
Fri Jul 28 15:02:55 PDT 2000:<E> <ServletContext-General> Servlet failed
with ServletException
[AddToMap: pattern=/login.jsp class=jsp_servlet.login]
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at
javax.servlet.ServletException.<init>(ServletException.java:88)
at
weblogic.servlet.jsp.AddToMapException.<init>(AddToMapException.java:14)
at weblogic.servlet.JSPServlet.service(JSPServlet.java:118)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(Compiled
Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(Compiled
Code)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(Compiled
Code)
at weblogic.socket.MuxableSocketHTTP.invokeServlet(Compiled
Code)
at weblogic.socket.MuxableSocketHTTP.execute(Compiled Code)
at weblogic.kernel.ExecuteThread.run(Compiled Code)
Fri Jul 28 15:02:55 PDT 2000:<I> <ServletContext-General> servletimages:
init
Try a different brand of discs. Try restarting your computer.
Similar Messages
-
Servlet failed with ServletException.
I'm using WLS 6.0sp1 in RedHat Linux.
I can't deploy Servlet with folloing Exception.
====================================================================
<Error> <HTTP> <test.mydomain.com> <mys
erver> <ExecuteThread: '9' for queue: 'default'> <> <> <101018> <[WebAppServletC
ontext(2639839,MyWebApp)] Servlet failed with ServletException>
javax.servlet.ServletException: Servlet class: 'HelloWorld.class' could not be l
oaded - the requested class wasn't found in the classpath: '/home/weblogic/wlho
me/wlserver6.0/config/mydomain/applications/MyWebApp:/home/weblogic/wlhome/wlser
ver6.0/config/mydomain/applications/MyWebApp/WEB-INF/classes:/home/weblogic/wlho
me/wlserver6.0/config/mydomain/applications/MyWebApp/WEB-INF/_tmp_war_myserver_m
yserver_MyWebApp'
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.
java:532)
=====================================================================
But absolutly, I can find HellowWorld.class file in //home/weblogic/wlhome/wlser
ver6.0/config/mydomain/applications/MyWebApp/WEB-INF/classes directory.
is there anyone who can help me?
The next is my web.xml file.
=======================================================================
<?xml version="1.0" ?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 1.2//EN
" "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<servlet>
<servlet-name>HelloWorld</servlet-name>
<servlet-class>HelloWorld.class</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>HelloWorld</servlet-name>
<url-pattern>/hello</url-pattern>
</servlet-mapping>
<web-app>
=======================================================================
I'm using WLS 6.0sp1 in RedHat Linux.
I can't deploy Servlet with folloing Exception.
====================================================================
<Error> <HTTP> <test.mydomain.com> <mys
erver> <ExecuteThread: '9' for queue: 'default'> <> <> <101018> <[WebAppServletC
ontext(2639839,MyWebApp)] Servlet failed with ServletException>
javax.servlet.ServletException: Servlet class: 'HelloWorld.class' could not be l
oaded - the requested class wasn't found in the classpath: '/home/weblogic/wlho
me/wlserver6.0/config/mydomain/applications/MyWebApp:/home/weblogic/wlhome/wlser
ver6.0/config/mydomain/applications/MyWebApp/WEB-INF/classes:/home/weblogic/wlho
me/wlserver6.0/config/mydomain/applications/MyWebApp/WEB-INF/_tmp_war_myserver_m
yserver_MyWebApp'
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.
java:532)
=====================================================================
But absolutly, I can find HellowWorld.class file in //home/weblogic/wlhome/wlser
ver6.0/config/mydomain/applications/MyWebApp/WEB-INF/classes directory.
is there anyone who can help me?
The next is my web.xml file.
=======================================================================
<?xml version="1.0" ?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 1.2//EN
" "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<servlet>
<servlet-name>HelloWorld</servlet-name>
<servlet-class>HelloWorld.class</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>HelloWorld</servlet-name>
<url-pattern>/hello</url-pattern>
</servlet-mapping>
<web-app>
=======================================================================
-
I synced my 3G with itunes for the first time and lost all contacts and information on phone, help?
I synced my 3G iphone with itunes for the first time, and lost everything on my phone. how do i get it back?
You don't.
You synced your iPhone with iTunes for the first time after how long?
And this didn't happen by syncing only. This means you transferred the backup for another iPhone or you restored the iPhone with iTunes. It is not possible for everything to be lost by syncing alone. All iTunes content on your iPhone can be lost but not any photos in the Camera Roll and the same for contacts unless you synced contacts with an empty address book application on your computer. -
I have archived my contacts on my computer and can reinstall only those, but I can't figure out how to wipe all of his contacts off my iphone.
You don't.
You synced your iPhone with iTunes for the first time after how long?
And this didn't happen by syncing only. This means you transferred the backup for another iPhone or you restored the iPhone with iTunes. It is not possible for everything to be lost by syncing alone. All iTunes content on your iPhone can be lost but not any photos in the Camera Roll and the same for contacts unless you synced contacts with an empty address book application on your computer. -
Photoshop elements 12 won't load up on my PC. The first time I try to load it up I get a large egg timer, which lasts about 3 seconds. The programme then closes and if I try to load it again I get the circular icon which spins for 1 second and disappears. I've tried rebooting several times but nothing happens. Please help!
Hi,
Please try resetting preferences?
On Windows: Goto %appdata%\Adobe\Elements Organizer\12.0\Organizer folder and rename the files “psa.prf” (to say psa_old.prf) and “status.dat” (to say status_old.dat).
Try launching Organizer and see if it launches fine.
Thanks
Andaleeb -
Sync my iphone calendar with MobileMe for the first time without deleting?
I never used iCal, I only us the calendar on my iphone to remember appointments. Now I just got MobileMe and I want my iphone calendar to sync with mobileme (obviously for the first time). But when I turn on MobileMe calendar sync on my iPhone, I get the message that if I save that setting, all my events will be deleted from my phone!
How can I start using MobileMe on my phone without losing all my events/appointments??
And what's the logic behind this behavior? I don't get it.childlost,
This is the expected behavior. When MobileMe Push is enabled on the iPhone, it replaces the existing information with what it finds on me.com.
I'd recommend following this guide for the initial setup: http://www.apple.com/mobileme/setup/iphone/mac.html
Hope this helps,
Raleigh -
After syncing with icloud for the first time, all my contacts disappeared
Recently for the first time I signed up for Icloud and tried to sync contacts with it, but after this procedure all my contacts disappeared from my iphone, i treid searching online for the solution but couldnt get back my contacts, when I logged in to icloud.com, even contacts list was empty. Any help regarding this will be appreciated.
I have had a similar problem, except all of my text messages are gone too! My contacts have slowly started to come back, but it appears that my most recently added contacts are gone, and my messages are also gone still.
-
Permissions issue only the FIRST time I try to overwrite a file.
I've a standard user account and I've found overwriting protected files is bugged in Leopard.
As an example: every time I'm upgrading Camino web browser with the latest nightly build (by dragging the new version from it's disk image, and into the Applications folder) I get a permissions issue the first time only. As usual I am warned I will need to authenticate, then I am warned I will be replacing a file, then the first time only I get told I do not have sufficient privileges on one or more items to continue. The second time I try I am allowed to progress to the authentication window where I enter my admin username and password and the operation completes.
The same thing happens with other files I'm trying to overwrite that are located in protected folders (I just use Camino as an example because it is a daily occurrence). But it ONLY happens the first time.
This has persisted through three erases of my brand new iMac's HD and clean installations of Leopard. I have of course run Disk Utility multiple times to repair the HD (no errors found) and repair permissions (just the usual ACL errors every Leopard user faces).Hi,
What's the error message did you get? It would be better to provide a screenshot for your problem.
Generally speaking, this problem can be caused by third party adds-on of IE. You can try to start IE with no adds-on mode for test.
Open run, type iexplore -extoff, pess
Enter.
If it works properly, please chck which plugin enabled in your browser, try to disable them for test.
In addition, this can also be caused by IE settings, try to reset IE for test.
Roger Lu
TechNet Community Support -
I downloaded the free Firefox system from the web. I have not been able to open the system since loading it.
I can not find any of the files you address.
I am tying to install Firefox for the first time. SO, if that is the case, how can any of these various files exist? I cannot access the contents of my "Application support" folder.
I have tried to delete Firefox and start over, and the same error message comes up.
I guess my frustration is how can I have a profile if I do not have Firefox installed? -
Any thoughts about my second go around with an I pad that will not charge. This is second go around and I'm wondering if I should repalce or opt out and go different route ???? Can not imagin that Apple could give the type of support I'm recieving and continue?? The first one was under warranty not so lucky this time.
Go to the Apple Store and try a different charger & cable.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
I am having issue with my portal the first time I login....
When I try to login into my portal in the morning, I get a timeout issue. I have been told that the database is going into a "Wait" mode and somewhat goes into hibernation until it is called on again. When it gets called on again (me logging in the morning) it times out. 10 minutes later, it come up and runs fine.
Has anyone experienced a similar occurrence?
Oracle Support is absolutely no help. I am at a point where if I can't get this resolved, I am going to try Microsoft SharePoint.Describe the issue.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
I saw one post where a user said dust got in the small mic hole. Used a vacuum cleaner to remove and audio restored. Try it.
Cheers, Tom -
How do I connect to the internet with Airport for the first time?
I just got my Airport express and I've been trying to configure it to connect to the internet but it doesn't work and I can't find info on the configurations. I have an ethernet "modem" which I used to connect the cable coming from it to the computer and now I connect it to my Airport. Although the green light is on and in network preferences, it tells me I'm connected to the internet, I can't browse the internet with Safari, etc. I've been trying to find information on how to configure the base station in Airport Admin Utility but there is no specific information. Is there anyone who could help me telling me how to set up the IP adress, if I need one, DHCP, preferences in Airport Admin Utility?? If the ethernet cable is connected to the computer directly I don't need a user ID or anything... It's all setup automatically.
As a minimum, in order to gain access to the Internet with an AirPort Express base station, you will need an Internet Service Provider (ISP) AND an Internet modem or gateway device.
What is the make & model of the Internet modem or gateway device that you have the AirPort Express directly connected to by Ethernet? What exact model of Express do you have? -
I use Firefox 4. Windows XP. I have tremors & must have accidentally clicked on something that made it open up with weird colors like it was in safe mode. It was in 8-bit so put it back on 32-bit and 1280 x 1024 pixels. Then the font was so small it is almost unreadable. Tried to change it in Firefox Tools, Options, & Content. This did not work. I then used Zoom after checking in Help but got the font so large I can't view my email right. It will not decrease when trying Control with the minus sign as suggested.
Did you change the resolution in Control Panel > Display ?
What is the native resolution of your video display (monitor)? -
Connecting a used iPhone with iTunes for the first time
When i bought my 5s end of last year i switched it on coming out of the box, without connecting it to iTunes. I started making back-ups to iCloud.
Now i want to connect it to iTunes to make a back-up, but iTunes thinks it's a new device and only proposes me either to restore an old back-up, or to start using the device "as new".
I'm afraid of losing everything chosing that last option, and the last back-up on my iMac must be one of my iPhone 4 so i wouldn't want that either.
Now how can i make a back-up with iTunes in that case?not sure if you read what i wrote..
iTunes only proposes me to either restore an old back-up, or to start using the device "as new".
So it's not possible to click any backup button in this case -
Working with CMYK for the first time - no bright colors in CMYK?
I have a project for school and have been told to use CMYK. i've never used CMYK before and know nothing about it other than CMYK standing for Cyan Magenta Yellow Key.
is it not possible to get bright, neon-y colors (the kind of color that is in the upperright hand side of the color box, like this green for example) ? when i try to choose colors like that, photoshop chooses a darker color instead, giving me a warning sign that the one i chose is "out of gamut for printing". is there anyway around this?It is not possible to get bright, saturated greens in CMYK. Here's a plot of the color gamut (available colors) of sRGB, the web colorspace (wireframe) compared to SWOP CMYK (the solid color area). See how in the bright greens there's a huge hole missing in the SWOP gamut.
You can work in RGB, and soft-proof CMYK (View > proof colors), converting as you save out a file for print. Don't worry too much, as most greens you see in print have this same limitation, and as long as you don't hold a neon green up for comparison, they usually look OK.
Maybe you are looking for
-
How can i update an asset in i DVD 09
I have done many many videos using imovie 08 and i dvd 08 as well and every time i added a movie to idvd for the final to burn it, i would go back and end up editing the movie in imovie for one reason or another. When i went back to iDVD to burn it a
-
Can you remove the camera white balance setting in Aperture
I have a Canon 7D and use Aperture for processing and storing my images. With the Canon I shoot both video and still and frequently adjust the white balance in the camera. I make a frequent mistake in leaving the wrong white balance setting on - eg
-
Profit Center derivation at the time of invoicing
Hi, Business requirement is to map fixed profit center for combination of Main and Sub transactions at the time of invoicing. As per my understanding, to derive fixed values for main and sub transactions, cokey needs to be mapped at EK02 which will i
-
I got a message saying that the batteries were low, so changed them for new ones and now the keyboard cannot be 'found'. There seems to be no way to turn it on and make it 'discoverable' to the system. At the moment I'm typing this on a spare keyboa
-
Java Add on error with MSSQL 2005
Hi when i try to insatll Java add on its giving me error message "database DEV has wrong compatability level" where our abap stack is working fine after applied SP13 level. please advice SAPinst is getting started. Please be patient ... guiengine: lo