Servlet Filter not working in Oracel9iAS(9.2.0.3)

Hi,
May i know what cause the servlet filter not workinng in Oracle9iAS? Is there any library files missing? I have tried deploy the war file in Tomcat but is working fine but when i try to deploy in Oracle9iAS, the application seems like can't call the servlet filter.
Please advice.
Thanks.
Regards,
Ming Jade

I'm not exactly sure what version you are using.
Servlet Filters were introduced in Servlet 2.3 which was part of J2EE 1.3.
Oracle9iAS 9.0.2.3 is J2EE 1.2 compatible .
Oracle Application Server 10g 9.0.4.x and 10.1.2 is J2EE 1.3 compatible
Oracle Application Server 10g 10.1.3 is J2EE 1.4 compatible.
So the problem could be that the version of the product you are using does does not support the version of the servlet spec that covers Servlet Filters.
Can you upgrade to/install the 10.1.2 release as a minimum?
cheers
-steve-

Similar Messages

Servlet Filter not working in JDK1.3.1

Hi,
I have an authorization filter which was deployed in WebSphere5.0 which is configured under datasource5(oracle thin driver) with jndi.
observed facts
===============
WebSphere 5.0 comes with jdk1.3.1. and supports datasource 4/5.0
datasource 5.0 will support servlet2.3.
Servlet 2.3 depends on jdk1.2.
Problem
========
When i am trying execute my filter in websphere its giving the below given error:
IntranetAuthorizationFilter was found, but is missing another required class.
]: java.lang.NoClassDefFoundError: java/lang/CharSequence
at java.lang.Class.newInstance2(Native Method)
at java.lang.Class.newInstance1(Class.java(Compiled Code))
at java.beans.Beans.instantiate(Beans.java(Compiled Code))
at java.beans.Beans.instantiate(Beans.java:77)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.loadFilter(WebAppFilterManager.java:292)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.getFilterInstanceWrapper(WebAppFilterManager.java:161)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.getFilterChain(WebAppFilterManager.java:208)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:1044)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:588)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:206)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:80)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:214)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:615)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:439)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:672)
My filter is not using java/lang/CharSequence anywhere.
Can someone figureout why this problem is coming.
Regards
Srinivas

As you probably know, CharSequence is an interface. Such classes as String implement this interface in JDK 1.4. So if you are trying to use filter compiled under JDK 1.4 then you certainly will meet the problem.

Lens Correction filter not working?

I upgraded to CS5 specifically to use the auto lens correction feature (primarily for barrel and pincushion distortion on my Canon zoom lenses). Now I find that:
Even though the camera back (5D Mark II) and lens information is included with an image, the lens correction filter requires me to manually select the back and lens.
Several of my lenses are not even included in the data base, even though they're very popular lenses (e.g., EF16-35mm 2.8 L USM II and EF 70-300mm DO IS USM). I realize the data base is to be enlarged, but these seem like inexplicable omissions. (And I have no desire or time to create my own profiles.)
The PDF instruction manual for CS5 offers no help, and I don't see this issue addressed in the forums. I'm hoping someone will be able to advise me on how to make this function work.

Jeff,
   Thanks for the quick answer, but I still think the menu is misleading.
   If the body choices were in the format of "full frame, 1.3 crop, 1.6
crop, etc.", it would be clear that the specific model didn't matter.
However, this would create its own problems since many people wouldn't
understand the concept of the crop factor for their camera.
   The fact that the 5D Mark II exists in the pull-down menu as a discrete
choice in addition to the 1Ds Mark III implies that there is a difference
between the two. Even if there is no functional difference in this context,
it would avoid confusion if the actual body from the EXIF information could
always be the default selection.
   Thanks.
From: Jeff Schewe <[email protected]>
Reply-To: <[email protected]>
Date: Sun, 16 May 2010 23:57:46 -0600
To: Mike Curl <[email protected]>
Subject: Lens Correction filter not working?

N5K : ethanalyzer capture-filter not working

N5K, NX-OS 7.0.5
ethanalyzer capture-filter not working whatever the filters used;
I understand the capture-filter values are different from display-filter;
for example :
ethanalyzer local interface inbound-hi capture-filter 'ip proto 89' limit-captured-frames 0
I tried "proto 89", "proto 0x59", and te same with ' ' instead of " ";
none is rejected but no frame is captured
If I use "ospf" as the capture-filter, I get the following normal since "ospf" is a display-filter :
tshark: Invalid capture filter: "ospf"!
That string looks like a valid display filter; however, it isn't a valid
capture filter (parse error).
Note that display filters and capture filters don't have the same syntax,
so you can't use most display filter expressions as capture filters.
See the User's Guide for a description of the capture filter syntax.
no problem with the following display-filter :
ethanalyzer local interface inbound-hi display-filter "ospf" limit-captured-frames 0
Any idea ?
thanks

i think i solve the problem: to make vlan filtering to work on 6500, i've added:
# conf t
(config)# int vlan 4000
(config-if)# no shut
(config-if)# mac packet-classify
Now, how to mark this question answered?

Filter not working for session timeout

Hi all,
I am working on a struts application in portal. I want to logout of the application when a user does not perform any action, for say 30 mins. For this, i am using a filter and defined the filter as follows in web.xml.
<filter>
<filter-name>PageFilter</filter-name>
<filter-class>SessionFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>PageFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
Also i gave the timeout in web.xml as follows.
<session-config>
<session-timeout>30</session-timeout>
</session-config>
And i had the filter servlet as follows.
public class SessionTimeoutFilter implements Filter
public SessionFilter()
public void init(FilterConfig conf) throws ServletException {
public void destroy()
// Create a new instance of SessionFilter
private static int firstRequest = 0;
public void doFilter(ServletRequest request,ServletResponse response,FilterChain chain)
throws IOException,ServletException
HttpServletRequest hreq = (HttpServletRequest)request;
HttpServletResponse hres = (HttpServletResponse)response;
HttpSession session = hreq.getSession();
try{
if (session.isNew()) {
if(firstRequest == 0){
firstRequest++;
else {
hres.sendRedirect("http://www.google.com");
firstRequest = 0;
return;
}catch(Exception e){
e.printStackTrace();
chain.doFilter(request,response);
When trying to execute this one i am getting a portlet 500 internal error. I am not sure where i went wrong. Can anyone give me a suggestion for this to work in a portal.?
Thx in advance....

Hi,
Thx for ur reply, Here i am using firstRequest as a counter variable. when the session is new and firstRequest is 1, it means that the session has expired and new session started and this is where i am redirecting to another page. The problem is, i think is mainly because of the sendRedirect i am using there in the code. I think sendRedirect will not work in portal, because when i test this application locally , it is working fine. But when i deploy it in portal, i am getting the error. Can you suggest me an alternative for sendredirect in portal.Even i tried with forward but no use.
Thx....

ADF Bindings Servlet/Filter not invoking Faces Servlet

I'm getting ADF Faces and Facelets working properly with pages written in jspx format, but the Faces Servlet being mapped to jsf format.
The problem I'm getting is while displaying ADF Tables with data retrieved from the database using Toplink and bindings provided by ADF Databindings.
The following is the Web.xml mappings for Faces Servlet and ADF bindings filter:
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>resources</servlet-name>
<url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.jsf</url-pattern>
</servlet-mapping>
<filter>
<filter-name>adfBindings</filter-name>
<filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>adfBindings</filter-name>
<url-pattern>*.jsp</url-pattern>
</filter-mapping>
<filter-mapping>
<filter-name>adfBindings</filter-name>
<url-pattern>*.jspx</url-pattern>
</filter-mapping>
I'm getting the ADF tables displayed using ADF Bindings, if the faces servlet is mapped for jspx format;but, at the cost of losing Facelets...Facelets is not working with Faces Servlet mapped to jspx format(though written in jspx format, the faces servlet mappping has to be made for jsf format.On the other hand, if I use faces servlet mapping for jsf pages I'm getting Facelets working but ADF Databindings are not working ,(I guess) and hence ADF Faces Tables are not being displayed(I'm getting Access Denied message).
I even tried to change the ADF binding filter mappings
---- from ---- jsp &jspx---- to ----- jsp and jsf ----
But I got the same Access denied message.
I read a similar post on this forum by Mr.Ashish Kumar who said he is using java script and automatic form submission, to refresh the page and that gave him the table working.
as quoted in the post:
af:table displays Access Denied
Why should the page be refreshed at all. I Guess , the Faces Servlet is not being invoked by the ADF Bindings Filter/Servlet, and for this , I suppose , Mr.Ashish is using java script to provide the action required.
And one more thing which that Automatic Refreshing of page using JavaScript cannot do.
Suppose,
I need customised display, rather than just a Table or Form,like:
public String getEmp() {
BindingContainer bindings = getBindings();
OperationBinding operationBinding =
bindings.getOperationBinding("findAllEmp");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
List<Emp> res=(List<Emp>)result;
for(int i=0;i<res.size();i++)
Emp myrec=res.get(i);
System.out.println("Employee ["+myrec.getEname()+"], Salary ["+myrec.getSal()+"]");
return "";
where I do some customisation in the backing bean.
and I call that method binded to a button as below:
<af:commandButton
text="findAllEmp"
disabled="#{!bindings.findAllEmp.enabled}"
binding="#{backing_Success.commandButton1}"
id="commandButton1"
action="#{backing_Success.getEmp}"/>
What I'm getting is a disabled button.
Why doesn't ADF bindings servlet invoke the faces Servlet?
Can't we make ADF Bindings Servlet invoke Faces Servlet by configuring in the web.xml?
Can't we get ADF Bindings filter mapped to work with jsf pages?
Won't ADF Bindings work with jsf pages, will they work only with jspx pages?
ADF Team,
Please Help me.
Thanking you,
Samba

Hi! Frank,
Thankyou for your Reply.
Yes, Mr.Adam Winer has contributed that library, I guess.
But I already have that adf-facelets.jar in my lib folder ; and with out that the Facelets won't work with ADF faces , in the first place.
I'm getting Facelets working excellently with ADF Faces but I'm not getting ADF Bindings working with Faceletpages.
The thing is even in another application which does not have facelets in it, if we use mapping for jsf pages, ADF Bindings are not working.
I think the ADF bindings filter is configured some where to work with jspx pages only.Could you tell me where to change that entry to make ADF Bindings work with jsf extension?
Thanking you,
Samba.

ALV Filter : Not working for a text field - Strange problem

Dear All,
I have a Z-program where the ALV filter is not working on a particular text field.
The output on that text field is as below :
ABCD
JKLM
YYZZ
ABCD
JKLM
ABCD
JKLM
YYZZ
YYZZ
When we try to filter on YYZZ, it gives blank list. But for other options given abobe it works fine.
I know it is because of the negative sign , but how can we over come this problem ?
Thanks in advance,
Sandip.

Hi Sandip,
Use 'LOWERCASE' in the fieldcatalog.
For the particular text field when you are appending the Fieldcatalog structure to the Fieldcatalog Table
( Suppose LS_FIELDCAT)
Then check the LOWERCASE field.
(LS_FIELDCAT-LOWERCASE = 'X' )
This will serve the purpose.
Regards,
Sourav

Query level filter not working in Webi report

Hi All,
I am using BOXI R3.1 (SP3), m facing one problem when refreshing Webi report on daily basis. I am using three query level filter as a prompt, but i checked one filter is not working then i need to reapply this filter and rest 2 filter is working fine.
Can anyone suggest me why problem is coming?
Regards,

Hi,
Prompts are interactive, and come from the query panel. Filters are not interactive, and are set on the report or block. There are also input controls, which are interactive filters
1. Select the universe in the list of universes to open the Query Panel.
2. Drag the Year object to the Result Objects pane.
3. Drag the Number of Guests object to the Query Filters pane and create a report filter that restricts Number of Guests to greater than n.
4. Click Combined Query.
The Combined Query pane appears in the bottom left of the Query panel with the two queries joined by UNION.
5. Click on the second query and remove the Year and Number of Guests objects.
6. Drag the Reservation Year object to the Result Objects pane.
7. Drag the Future Guests object to the Query Filters pane and create a report filter that restricts the future guests to greater than n.
8. Click Run Query.
Best Regards
Naveen

JSPs and Servlets do not work on Apache HTTP- Procesor Intel P4

Computer description: Intel Pentium 4 processor with 20GB HD
drive, 1GB RAM, Windows 2000Pro, Service pack II
Before installation:
We created a temporary directory on our Intel Pentium. 4
processor server (e.g. \TEMP).
Copied the contents of the Oracle* Server CD to the temporary
directory.
Renamed each copy of the SYMCJIT.DLL to SYMCJIT.OLD.
Set the java_compiler=none environment variable.
Installation:
We run the SETUP.EXE from the \TEMP\install\win32 directory and
install Oracle 8.1.7 EE Rel 3 Typical
Configuration tool Net8 Configuration Assistant succeeded
Configuration tool Oracle Database Configuration Assistant
succeeded
Configuration tool Starting Oracle HTTP service: 7 times error
message (java.exe has generated errors and will be closed by
Windows, You will need to restart the
program, An error log is being created)
HTTP server responses.
All Java programs do not respond (e.g. IsItWorking does not work)
After installation:
Open the jserv.conf file chack that ApJServManual is set to Off.
set ApJServLogLevel debug (will give more informative errors for
debugging)
set ApJServDefaultHost www.in.oracle.com (to your machine name
with the
domain name or IP address)
set ApjServDefaultPort 80000
Open the jserv.properties files and make the following changes:
bindaddress=www.in.oracle.com (Same name as ApJServDefaultHost
in jserv.conf)
port=80000 (same port as in the jserv.conf)
Enable all log options in jserv.properties:
log=true
log.file=/usr/local/apache/var/log/jserv.trace
log.timestamp=true
log.dateFormat=[yyyyMMdd HHmmss:SSS]
log.channel.init=true
log.channel.terminate=true
log.channel.serviceRequest=true
log.channel.authentication=true
log.channel.requestData=true
log.channel.responseHeaders=true
log.channel.signal=true
log.channel.exceptionTracing=true
log.channel.servletManager=true
Java servlets and JSP still do not redspond.
If we try to start HTTP server from Windows service, we always
get message: unable to locate dll: The dynamic link
library Perl.dll could not be found in the secified path (our
path: C:\oracle\ora81\bin;C:\oracle\ora81\Apache\Perl\5.00503
\bin\mswin32-x86;
C:\Program Files\Oracle\jre\1.1.7
\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;) and
error message: Could not start
OracleOraHome81HTTPServer service on local computer. The service
did not respond to the start or control request in a
timely fashion.
Starting Oracle HTTP service from Start/Programs/Oracle: 7 times
error message (java.exe has generated errors and will be closed
by Windows, You will need to restart the
program, An error log is being created)
We tested also modifications of oraparam.ini
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the CD
instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1
\DataFiles\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the CD
instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1
\DataFiles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\ win32\setup.exe). This will use the modified
oraparam.ini and pick up the information from the CD since the
absolute
locations are specified.
After that modification of oraparam.ini, the HTTPServer does not
respond at all.
So we undo changes on oraparam.ini and reinstall HTTP.
We copied SYMCJIT.DLL and jvm.dll from JDK 1.1.8_008 to
Apache\jdk\..
Since then at least the demo IsItWorking responses, but database
connection can not be established. But jsp demo still do not?
THX in advance
Neja

I'm still having problems with Portal config (as part of 9iAS) on
a P4 but i have cleared the hurdle of the HTTP listener (i
think).
I downloaded and installed the JRE that is P4 compatible from
www.sun.com (it puts it under c:\program files)
then overwrote all the files in the jre directories in the cd
staging area with the files from Sun (i.e. all symcjit.dll
locations). I also had to put a file "javai.dll" in the same
directory as the file "java.exe". This got the install all
working.
The service will fail first time because the install creates
another set of incompatible jre files. You must again search for
symcjit and repeat the above procedure.
You must also overwrite the files in the c:\program
files\oracle\inventory\jre directories (sorry cant remember exact
path).
Hope this helps.
Mark Gornicki
PS if anyone knows why Portal config hangs at 67%
(before/during/after processing "bulkload.jar" section) please
let me know :-)

Oil Paint Filter not working - CS6 - Can you help resolve this?

Can you help? The CS6 oil paint filter is not working. The error is: "The filter you were using encountered an unknown graphics processor error that caused an unexpected exit. Check the manufacturer's website for the latest software."
I have the latest graphics driver software. I have the latest update for CS6. I have followed various community support recommendations to no avail.
In the Advanced Graphics Processor settings (preference, performance) only "Basic" is available and I can't select (grayed out) "Use Graphics Processor to Accelerate computation" and can't select "use OpenCL".
My System: Windows 7 (64 bit), HP Pavilion dv6-3250us Notebook with Intel(R) High-Definition Graphics Driver.
Here is system information (from CS6):
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2660 MHz
Built-in memory: 3894 MB
Free memory: 897 MB
Memory available to Photoshop: 3318 MB
Memory used by Photoshop: 69 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: False.
OpenGL Allow Advanced Mode: False.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Card Number: 1
Video Card: Intel(R) HD Graphics
OpenCL Unavailable
Driver Version: 8.15.10.2189
Driver Date: 20100728000000.000000-000
Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics
Video Card Memory: 1723 MB
Video Rect Texture Size: 4096
Serial number: 95478109889423625236
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Chris\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 669.3G, 316.9G free
D:\, 29.1G, 3.72G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.3
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Embed Watermark 4.0
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Measurement Core 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00)
   Mezzotint 13.0
   MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Sumi-e 13.0
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   Underpainting 13.0
   Vanishing Point 13.0
   Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

You haven't installed the Photoshop updates -- you should be on 13.0.3 or 13.1.1, not 13.0.0.
Oil Paint uses the GPU, and requires a decent GPU.
Your GPU doesn't support many of the features needed by the Oil Paint filter, and barely supports any of the GPU features in Photoshop (notice that it does not support OpenCL, or Normal or Advance mode for GPU drawing).

Is prompted filter not working correctly with calculated items

Hello,
I am working on OBIEE 11.1.1.3 and having problem problem linking 2 analisys with action link
The test case is:
I have 2 attribute columns on a dimension
1. Conto 1 Code
2. Conto 1 Dsc (in RPD i set up the property Descritor ID of -> Conto 1 Code)
3. Conto 2 Code
4. Conto 2 Dsc (in RPD i set up the property Descritor ID of -> Conto 2 Code)
5. Conto Detail
and 1 measure on the fact table
1. Revenue (defined on RPD as simple sum)
On presentation layer i have the analisys:
1.
The First one using as Criteria: Conto 1 Dsc | Conto 2 Dsc | Revenue
The layout is a table with sub-total on Conto 1 Dsc
On Revenue i created an action link to the second analisys containing
2.
Criteria: Conto 1 Dsc | Conto 2 Dsc | Conto Detail | Revenue
Filters: Conto 1 Code (is prompted) | Conto 2 Code (is prompted)
This pair of analisys are working fine.
Then i created a second pair of analisys as:
1.
Criteria: Conto 2 Dsc | Revenue
Using Calculated group \ Items i created a numerous set of sub-totals
On Revenue i created an action link to the second analisys containing
2.
Criteria: Conto 2 Dsc | Conto Detail | Revenue
Filters: Conto 2 Code (is prompted)
This pair of analisys are not working correctly. When i drill from first analisys to second one the Conto 2 Code filter is not used.
Replacing in the second analisys Conto 2 Code (is prompted) with Conto 2 Dsc (is prompted) a filter is being generated on the drill but it's using the Conto 2 Code value and the analisys ends with no results.
Thanks,
Jonni

Try adding Conto 2 code to the first analysis and keep the filter on the second analysis as Conto 2 code is prompted.
-Amith.

Servlet reloading not working with WLS 5.1 sp8

          I downloaded and installed WLS 5.1's sp8 to fix the "java.net.SocketException: Connection aborted by peer: socket write error"
          problem. Although that problem is fixed, I have found that, however, the servlet (automatic) reloading does not
          work anymore. If I remove the sp8 from my Java system classpath and WL classpath (i.e. not using sp8), then
          the servler reloading works fine.
          Does anybody experience similar problem or have I forgot to do something?
          WLS properties/env vars setting:
          - weblogic.httpd.servlet.reloadCheckSecs=0
          - WEBLOGIC_CLASSPATH=%WEBLOGIC_HOME%\lib\weblogic510sp8.jar;...
          - JAVA_CLASSPATH=%WEBLOGIC_HOME%\lib\weblogic510sp8boot.jar;...
          Thanks in advance for any help.


          I've experienced the same problem with both sp6 and sp8. In both cases I performed several test, including
          - varied the value of weblogic.httpd.servlet.reloadCheckSecs
          - changes to the package depth the servlet belonged to
          - changes to the string length of the package names the servlet belonged to
          At best, the servlet would reload sometimes. I've moved back to sp5 and the problem has subsided.
          Note: I did not try registering the servlet to see how that would effect the dynamic reloading.
          Hope this helps
          - Dave
          "Michel Dinh" <[email protected]> wrote:
          >
          >I downloaded and installed WLS 5.1's sp8 to fix the "java.net.SocketException: Connection aborted by peer: socket write error"
          >problem. Although that problem is fixed, I have found that, however, the servlet (automatic) reloading does not
          >work anymore. If I remove the sp8 from my Java system classpath and WL classpath (i.e. not using sp8), then
          >the servler reloading works fine.
          >
          >
          >Does anybody experience similar problem or have I forgot to do something?
          >
          >WLS properties/env vars setting:
          >
          >- weblogic.httpd.servlet.reloadCheckSecs=0
          >- WEBLOGIC_CLASSPATH=%WEBLOGIC_HOME%\lib\weblogic510sp8.jar;...
          >- JAVA_CLASSPATH=%WEBLOGIC_HOME%\lib\weblogic510sp8boot.jar;...
          >
          >Thanks in advance for any help.

Aspect ratio filter not working properly

I am running LR3.5 on Mac OS 10.6.8 and recently discovered that the aspect ratio filter is not working when used on folders created a few years ago. Specifically, a great many images shot in landscape mode are included with the portrait mode filter instead of in the landscape mode filter. This is not happening with more recent folders. At least one of my camera bodies has been used for images in older and newer folders so I do not think it is the camera's fault. I should also add that the files are saved in the dng format.
I do not know how long this has been going on, since I rarely use the aspect ratio filter. It is even possible that this happened when I converted my catalog from LR2 to LR3. The integrity of the catalog is checked each time I back up, which is whenever I exit. Does anyone have any ideas how to fix this?
Thanks.
Mark

So the metadata is properly showing the images as landscape. Somewhere along the way LR got out of sync, perhaps moving images into a new catalog? As long as there are no portrait Crops on any of these files they should filter properly after resynching the DNG metadata. There have been other posts with this same issue and a bug report to Adobe. Not sure it has been actually fixed though:
http://paulsumberg.com/2010/08/03/leave-it-to-me-to-discover-a-flaw-in-adobe-lightroom/
http://paulsumberg.com/2010/08/14/bug-alert-adobe-lightroom-and-work-around/

Email Filter - level 1 notification filter not working

I run a BES 5.0.2 system with 95 users and many rely on filters to forward alerts from a specific address and flag them as level 1.
Messages Options\Email Filters
Worked like a charm previously, but recently has stopped working.
I've tried every which way, and the phones fail to recognize new filters for level 1 messages.
We recently migrated our BES system to new hardware, but I don't know when this stopped working so don't know if\how it could be related.
Any ideas?
Curve 8330 v4.5.0.127
Battery pull - no change
Filter not showing on BES & Vice versa - seems like something isn't synching. Email and calendar synch AOK.
Update - Interesting - On the BES server if I create the filter it works, but doesn't synch down to show on the BlackBerry. If created on the BlackBerry, it doesn't work and also doesn't sync up to the BES server.
BES 5.0.4
BES 10.2
Exchange 2010
SQL2008R2

I opened an incident with RIM and after an hour of troubleshooting have partially narrowed it down and resolved the issue on my device - now for the other 90+.
We did 2 things at once - changed to default policy, and secondly deleted the desktop sync and desktop cmime service books, then repushed them out from BES. This fixed it.
Tech said I could push service books to all users, but didn't advise as to a way to delete service books via BAS.
I checked a number of users and their service books are showing our old SRP info - so after the migration the new service books look like they haven't pushed down.
BES 5.0.4
BES 10.2
Exchange 2010
SQL2008R2

8.1-beta servlets do not work?

Hello,
          I'm using a web.xml file with 2 servlets in it that works fine
          in WLS 6.x and 7.x. Yet, it does not work in 8.1.
          If I delete the servlet and servlet-mapping elements I can
          deploy my webapp (in an ear) and it deploys. Otherwise it
          will not work.
          Has anyone else seen this with 8.1-beta?
          Thanks.


Are you getting any exceptions / error messages?
          --Vinod.
          "Mark Swanson" <[email protected]> wrote in message
          news:[email protected]..
          > Hello,
          >
          > I'm using a web.xml file with 2 servlets in it that works fine
          > in WLS 6.x and 7.x. Yet, it does not work in 8.1.
          >
          > If I delete the servlet and servlet-mapping elements I can
          > deploy my webapp (in an ear) and it deploys. Otherwise it
          > will not work.
          >
          > Has anyone else seen this with 8.1-beta?
          >
          > Thanks.
          >
          >

Servlet Filter not working in Oracel9iAS(9.2.0.3)

Similar Messages

Maybe you are looking for