SES_ADMIN search help index to add transport request.

Dear All,
I have a requirement to add index for particular business object in SES_ADMIN.
i need to business object index to add into a transport request to move to other systems.
please let me know whether it can be possible to add index into a transport request?
Thanks & regards,
Prathap.

Hi Prathap.,
I'm not sure why you would want to transport an index from per-production to production.  The content the index points to would not be live production data.  I think you might want to transport you search configuration.  Please visitSearch Engine Service Configuration for Advance search
Best regards,
Duncan

Similar Messages

  • Need TP command for Add  Transport Request to import Queue all at a time

    Hi SAP gurus,
    Can you tell the o/s  or  TP  command  to  Add   Transport Request to import Queue all at a time which are available in co files directory   ,
    Because I have to add 500- 600 request .  For every request I canu2019t  do like this  STMS_IMPORT  -- Extras=> other requests -add--
    Thanks and regards
    babu

    Hi,
    You can export list of all transport requests from your DEV system in one shot, from SE09-> Display (provide your required selection criteria) -> Goto -> "Display as List"
    You can export these all Transport Requests as Spreadsheet. Then Filter out all your required 400 to 500 Transport Requests.
    Now,use another excel sheet to create a file with the list of required transport request Nos only, then concatenate all of them to generate the required TP commands as mentioned below.
    The syntax will become as follows:
    column1           column2         column3
    tp addtobuffer DEVK900123 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
    tp addtobuffer DEVK900124 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
    tp addtobuffer DEVK900125 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
    tp addtobuffer DEVK900126 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
    tp addtobuffer DEVK900127 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
    tp import          DEVK900123 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
    tp import          DEVK900124 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
    tp import          DEVK900125 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
    tp import          DEVK900126 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
    tp import          DEVK900127 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
    -> Open Notepad and Copy+Paste these three columns & save the text file in the <Drive>:\usr\sap\trans\bin\ folder.
    -> Then rename this .txt file to *.bat.
    -> open a command prompt and change to the <Drive>:\usr\sap\trans\bin\ folder and run the .bat batch file.
    Make sure that object lists of all the Trans. Requests are checked and confirmed for the transport to avoid data incosistency in target system. (e.g. Number Range Object)
    Regards,
    Bhavik G. Shroff

  • RFC error when trying to add transport request in queue in STMS..

    Hi,
    When I try to add a Transport request in queue in STMS transaction. I get RFC error saying some problem with tp program.
    But when I go and check the RFC connection through STMS in system overview -> Communication -> RFC setting, it says RFC connection Ok.
    What may be the issue  ? I really need some light on this..
    Regards,
    Rajesh.

    Hi Rajesh,
    At times when u try to add the TR to a queue there would be 2 reasons.
    1. If u have imported a TR into a system say QTY and it needs to be re imported, then we delete it fromthe STMS queue and add it again to re import it.
    2. If u have some transport from external sap system to be imported here we place the data and Co files in the trans directory and then add the TR to this queue.
    A TP failure happens if the data and co files does not exist in the TP directory or else, the TR target system is incorrectly mentioned.
    Hope it helps.
    Br,
    Sri
    Award points for helpful answers

  • CRM Support Package Manager - Add transport request to queue

    Hi,
    I'm applying CRM Support Packages with SP_MANAGER on the production system.
    I already applied these SP on the development system, I performed an SPAU adjustment, selected the corresponding transport request to use it on the production system, but SP_MANAGER didn't asked for this transport on the production system.
    How can I add the SPAU adjustment to the queue with SP_MANAGER ?
    Kind regards,
    Christophe

    Hi,
    That's why I opened this message: in step 1 of the procedure described by the link (http://help.sap.com/saphelp_nw04s/helpdata/EN/de/151042f664e12ce10000000a1550b0/content.htm), the system should ask for a transport request. This is not the case here, despite the fact that the correct setting is set in SPAM.
    Any other idea ?
    That's not a problem since I can use a workaround (import via STMS when the system asks to perform the adjustment), but I wonder why the system doesn't ask for a transport request in the case of a CRM system.
    Kind regards,
    Christophe

  • How to add one column in existing search help.

    Hi Folks,
    My quesion is
    How to add one column in existing search help and also Now search help on that field is not an explicit search help. It should be implement using check table.
    Shivam

    Hi,
    If you want to add a field in Elementary search help, get the search help name for the and go to change mode and add the field in it.
    If you want to add a field in collective search help, go to included search helps tab and a new search help name and add the fields to it.
    I think this should help you to certain extent.
    Regards,
    Kranthi
    Edited by: Kranthi on Jan 14, 2010 11:15 AM

  • Unable to delete Transport Request which contain locked objects

    Hi all,
    I need to delete  some unusable transport requests but as they contain locked objects, it's not possible to delete them. Release operation is just allowed. After releasing these transport requests, I can not find them any more in queue. Please help to find these  transport requests which are released and also provide a solution to delete instead of releasing them.
    Thanks in advance,
    Sanaz.

    Hi,
    Thank you for the reply.
    1. What do you mean by transport request , Shipment Request, Shipment Order or Tour.
    A. I mean requests which can be transported between SAP Systems using TMS (Transport Management System).
    2. What are the objects which has been locked and due to that you are facing this problem.
    A. There are diffrent object types. For examle some customizing have booen done or SAP Note correction has been implemented, ... Therefore some objects have been locked due to these operations
    3. Let's say if it's an freight Unit, then Pls confirm that System dump / error is not the cause for this.
    A. I have no idea about "Freight Unit".
    Thanks,
    Sanaz.

  • Attaching a search help to a selection screen "Select-options"

    Hello ABAPers,
    I have  a requirement to attach a search help to "select-options" .
    When I checked the table corresponding to the field of select-options,I found that there is no search help assigned for that field.
    I have tried using AT Selection-screenON VALUE-REQUEST and Matchcode Object .
    However, Matchcode Object requests for standard search help name.
    On value-request assign shelp only for the lower linit,but on pressing F4, gives no values found.
    Tried using  the FM F4IF_INT_TABLE_VALUE_REQUEST also. But this is for the POV event.
    Could anyone please suggest a solution for this problem?

    Hi,
       As you are using this Z search help in select options there is no way of interfering with standard SAP table.
    You can declare it as:
    Select-options QNAME for TQRFCOUT-QNAME matchcode object <Z search help name>.

  • Search help PREM is empty

    We just upgraded to SAP ECC 6.0 and we are no longer able to do mathcode lookups on employees names.  i.e., PA20 and then in the Personnel No field when we enter =n.smith we get the message "No input help available (search help PREM is empty).  PA20 was just one example and it happens on all of our screens. 
    I can see PREM in se12 search helps and it calls the HRMC_PREM_EXIT_A function module which calls the HRMC_PREM_EXIT.  Does anyone have any ideas as to what the problem may be and what I can do to fix it?  thx in advance for any help you can provide.

    The OSS Notes you provided were not my problem in the end.  I have resolved my own problem and here are some of the details.  I certainly appreciate your response though.
    In Previous versions of SAP (pre 6.0), we modified PREM to add our own search helps in PREM - Z_PREMK02 and Z_PREMN02.  In going to 6.0 these additional Z search helps did not exist in PREM and consequently the PREM search help was not functioning Properly.  It came up with an error u201CNo input help available (search help PREM is empty).u201D
    To Resolve this issue I created a new APPEND Search Help ZPREM by doing the following steps:
    - Go into se12
    - Put in PREM for the Search help and click on Display
    - Click on Goto -> Append Search Help and at the prompt type in ZPREM as the Appended Search Help Name
    - Definition Screen should autopopulate
    - In the Search helps for ZPREM add the  two Z Searchps above + the PREMN one
    - Do Parameter Assignments for the 2 Z* ones of PERNR
    - Once you have done all of the above go into both the Z_PREMK02 and the Z_PREMN02 and change the Search help exit to HRMC_PREM_EXIT_A

  • Help me on Search Help :D

    Hello Frnds,
    I have two fields on screen. Fld1 and Fld2. Fld2 has a Search Help assigned to it.
    Problem is...
    I want search help to work only if Fld1 is blank, else only values associated to Fld1 shd show on F4 in Fld2.
    For second option Iam using function module F4IF_INT_TABLE_VALUE_REQUEST
    BUT how can I make it work for both conditions. Is there any function module where I can assign search help to field at run time.
    Waiting for your replies.
    Regards,
    Arpit

    Hi Arpit,
    I am assuming you have a database field defined for this field. I don't think you can switch between SEARCH HELP and your own search help using PROCESS ON VALUE-REQUEST. What you have to do is, have just the PROCESS ON VALUE REQUEST and have something like this in there.
    IF fld1 is initial.
    *-- use search help, for that, call
      F4IF_FIELD_VALUE_REQUEST, giving table name and
      fieldname and may be your search help name also.
    ELSE.
    *-- your current logic using
      F4IF_INT_TABLE_VALUE_REQUEST
    ENDIF.

  • How to check a Transport Request

    Hi All,
    We did all the configurations for adding a plant and took the necessary transport requests. However someone deleted the plant  and the associated  configs. The issue what we have is few configs are existing and some or not.
    How to find out which require re configuration from the transport request? Is it safe? or do we need to redo the complete configs again?
    thanks for the help
    Ganesh

    Hi,
    Check that Transport request for the consistency as according to you the plant has been removed so,
    It wouldnt be consistent.
    you can do it from,
    Se01 --> transport number > Request task on top>overall check-->check consitency.
    If its a programe check the TCode : Se39 for split screen editior.
    If its a table use tcode:SCMP..
    U can always check the versions as Rudra mentioned utilities-> version management> two arrows.
    Cheers
    Mohinder Singh Chauhan

  • How to create Transport request for OKC9 changes

    Hi Experts,
    I changed the Prerequisite for one of the substitution in Development client.
    No I need to move the same to Production client, but after make changes in prerequisite am not generating the Transport request. Please help me out how to create the Transport Request for the same.
    Regards
    Vijay

    HI,
    In the same screen, go to Menu bar>Table view. Transport.
    This will help you to create Transport request and u can move the same to Production.
    Vijay

  • Add search help/drop down list to a standard field in MIR7

    Hi All,
    I have a requirement to add  a search help on one of the strandard field in MIR7. This field has no search help in dictionary (SE11). Do you have any idea on how to do this? Is there any exit that i can use to?
    Please help!
    Thanks in advance.

    Hi Akira,
    Please check the below threads.
    [how to create F4 for the standard transaction]
    [F4 HELP for standard field..;
    [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/daeda0d7-0701-0010-8caa-edc983384237]
    [Re: Adding a field in standard search help;
    Edited by: Prasath Arivazhagan on Apr 13, 2010 5:38 AM

  • Add bunch of transport requests at a time

    Hi Friends,
    How to add bunch of transport requests at a time to import buffer using tp tool at OS level on windows?
    Any help would be appreciated
    Thanks

    Hi Jawed,
                         It's depends on the script which you are using. Try to copy in excel and pase in the dos  > prompt. This may help you.
    Regards,
    Hari.

  • How to add search help to a field in MARA table

    Hi,
    According to my requirement,I need to add search help to one of the field in MARA.It is checkbox now and it has to be changed to drop down.
    How to do this please help.

    hi u can use HELP-REQUEST option at selection screen or VALUE-REQUEST
    The addition on Value-REQUEST displays the pushbuttuon for F4 help for the corresponding field.
    The value selection is controlled by interactive events.
    pradeep

  • How can i add search help

    hi  how can i add search help .
    when i am giving a parameter of type BSART  it takes the in built search help
    but i want only those values to appear in F4 help which have  diff values in category  but i want only with catogory "F".
    thanks in advance
    naval bhatt

    Hi,
    You have a Function module <b>HELP_VALUES_BSART</b>
    or
    You need to use AT SELECTION-SCREEN ON VALUE-REQUEST FOR <FIELD>.in this one use the Function module F4IF_INT_TABLE_VALUE_REQUEST.
    Look at the below linkhttp://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbaac935c111d1829f0000e829fbfe/content.htm
    Regards
    Sudheer

Maybe you are looking for