Session expired error(ISS , ASP related problem
We have one server which contain both ISS & WEB server ,on this server the database is running perfectly all right, also we are able to access the our site also (Named as UMPIRE ), but after few seconds , we get an error that the session is expired. Again when we refresh the page it start running. As per my knowledge, I think the session expire time given to the site is very less
Actually the web page is on ASP and ISS is installed on the server , i think some configuration setting is to be required for the ISS , after the installation
Can anybody help in this regard , what are the reason to get this error
Session expired
and whhat is the solution to remove this error
And just how does this forum's subject matter, SQL and PL/SQL, factor into your problem and question about ISS configuration?
Similar Messages
-
Session Expired Error in Oracle Vision Demo due to absence of a cookie !!
Hi Folks,
I kept getting the session expired error in Vision Demo even after I had supplied the right user id/password combos. So I set up a on-logon trigger in the APPS schema and it turns out that the Front End JSP page calls the ICX_SEC package.
Herein it refers to the function valiadateSession inside this package. I did some digging around and it turns out that inside this function using the OWA_COOKIE utility the function tries to get the details of a cookie called 'WF_SESSION' and passes this to the Front End.
And this is where it is failing. I checked to see and the return from the OWA_COOKIE.GET('WF_SESSION') does return a value of NUM_VALS=0. So the problem remains that the intial JSP page is unable to either set the cookie or I am reading this all wrong.
Plan to dig deep into this. Meanwhile if anyone has faced this error any helpful tips would be deeply appreciated.
PS: I am new to Oracle Apps and have to learn it in a hurry :(( Sad part is am unable to even get into the Application as of now :P I have installed and am using 11i.8 (11.5.8).
cheers
~
kaushikCheck your browser settings for accepting cookies from this domain, you must have tried this by now clearing all your browser cache and cookies.
try solutions beacon site where they have Oracle Apps Demo Instances for Public
http://www.solutionbeacon.com/tools_vision.htm -
BIP event trigger throwing session expired error!
Hi,
I am trying to have some event triggers in my data model, but as soon as i click on the UpdateDefaultPackage button the box throws session expired error.
I am using Firefox for development, and when i do the same in IE the function list doesn't get populated.
Give me some suggestions.
Thanks and Regards
PrakharCheck your browser settings for accepting cookies from this domain, you must have tried this by now clearing all your browser cache and cookies.
try solutions beacon site where they have Oracle Apps Demo Instances for Public
http://www.solutionbeacon.com/tools_vision.htm -
Report not running "session expired error"
while trying to run a query...its not opening and showing "session expired error after 30 mts.
how to rectify ithi devi,
use the following links
Error msg in BW after session timeout
Retain hierarchy node value on selection screen during execution of report
with hopes
Raja Singh -
Session expired error after migration 11.1.1.1
We are taking a lots of session expired error after migrating our projects from 11.1.1.1. to the 11.1.1.0
How can we control session parameters in Jdev 11.1.1.1 and Web logic 10.1.3.1 ?
Thanks.Hi,
its still the same setting in the web.xml file. However, I think the expiry you mean is the one raised by the client framework. As far as I remember there is no way to configure itslength. I'll take a not to see what the plans are in this regards. Can you confirm that its not the serve expiry but the message you get from ADF Faces RC?
Frank -
Session Expired error in browser
Hi guys,
I hope everyone had an excellent festive period. I have been trying to access certain parts of websites and after I have successfully logged in and trying to access the member section i receive this error:
Session expired
Why does my session expire?
This could be either...
For your security, your session expires after 10 minutes of no activity. This means no link has been clicked or data has been submitted in last 10 minutes.
You have entered the URL of a particular page, which cannot be viewed without prior authentication.
I have previously accessed these websites on my PlayBook but I am unable to any longer. These include the Etihad careers section along with the Emirates careers section.
I have tried clearing the browser history, cookies, cache and local storage along with restarting the PlayBook, but all to no avail.
Any help would be greatly appreciated.
Regards,
DaveI completely miss read that my apologies. I have tried the hard reset and still to no avail. Any other suggestions would be greatly appreciated. I have also tried the bridge browser and I have also tried the basic browser and also the comic sans browser and all of these have the same errors as well.
-
Session expired error when creating dataset
Hi all,
I am using BI 11.1.1.6.
I am unable to create a specifically one data set where when I click on OK after giving in the query and dataset name, it says "session expired, please login again". I am able to create other datasets querying from the same schema and tables however this one specifically keeps failing with the same error.
Is this a bug or am I doing something wrong? The query is as shown below however please note that I am able to put in this query in sqldeveloper and even get data output.
Thank you.
SELECT
proj.project_title,
proj.project_name,
rqmt.application_no,
rqmt.amount_certified,
rqmt.period_to,
rqmt.prev_additions,
rqmt.prev_amount_cert,
rqmt.prev_deductions,
rqmt.sub_total_addtns,
rqmt.sub_total_ddctns,
rqmt.sum_to_date,
rqmt.total_additions,
rqmt.total_balance,
rqmt.total_deductions,
rqmt.total_prev_appl,
rqmt.contractor_claim_amount,
cnmt.document_number,
rqmt.orig_contrct_sum,
rqmt.contractor_commit_total_amount,
(select sum(this_period) + sum(PREV_APPLCATIONS) from rqdt where rqdt.parent_key = rqmt.master_key and RETENTION_LINE <>1)
FROM proj,
rqmt,
cnmt
WHERE ( proj.project_name = rqmt.project_name )
and ( rqmt.cntr_master_key = cnmt.master_key )
and (( cnmt.document_type = 'INITIALCONTRACTCOMMITMENT' ) )
AND rqmt.IT_IS_THE_LATEST = 1;hey there, sorry i did not but the error stopped after a few days, no idea why and how
-
Visual Admin. session expired error
H i All,
I am using netweaver 2004s on windows 2003 server with SQL server.
Upto Some days back my visual admin was working fine but now when i am logging after loging its showing session expired.
Please suggest.
Gyan....Hi,
Can you post some trace information? In the meantime have a look at SAP Note 999429.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=999429]
Are you able to access NWA?
Hope this helps.
Manoj
Edited by: Manoj Chintawar on Feb 19, 2009 11:21 AM -
KDE does no longer start - DBUS error - Awesome WM related problem
Hi,
so I somehow managed to screw my KDE. I can no longer log in as my standard user, when I enter my username & password into the login-manager, the start process ends with a Window showing 'Could not start D-Bus. Can you call qdbus?'. When I press ok, I land back in the log-in screen.
The following is the content of ~/.xsession-errors:
/usr/bin/startkde: line 22: /usr/share/config/kdm/kde4-config: No such file or directory
Agent pid 2157
startkde: Starting up...
startkde: Could not start D-Bus. Can you call qdbus?
and at the end of the /var/log/kdm.log:
klauncher(2188) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(2182)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(2182)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
Strange thing is, Dbus is running, so that should not be the problem.
So, I have asked around in the IRC channel, and was advised to move my .kde4 config, so that kde would create a new one. That did unfortunately nothing, the same problem persists. So then I created a new user for testing and voila, KDE starts under this user with the generated configs (even with the configs from the old user, though he wants to start everything as the old one and that causes problems).
Now my question is, what could be causing the problems? Dbus is surely running, as I can log in as the new testing-user, it also shows up in the process list, when I am logged in. Unfortunately it does not start up when I try to log in as the old user, and hence I can't start KDE. I was told, I could just delete the old user and create a new one to solve this issue, but I would like to avoid that.
Thanks in advance for any advice.
EDIT: Apparently the problem is related to awesome, after installing awesome, KDE seems to break after awesome is installed for every present user on the system. See also post #4.
Last edited by Defolos (2013-05-23 07:48:09)berbae wrote:
Defolos wrote:So I just though about what happened before KDE died, and I remembered that I installed awesome, logged in, logged out and after that KDE was broken.
What happens if you reboot after uninstalling awesome, instead of just log out/log in? Does kde work again then?
Nope, did that immediately after KDE broke. Rebooted actually several times without awesome installed and it didn't help.
berbae wrote:You didn't say how you launched awesome: from kdm or from console or other way?
It is started from kdm.
berbae wrote:Say also if you have the systemd kdm.service enabled.
Cant tell you that right now, don't have the machine at work. Will check that later.
berbae wrote:
Look what processes are running (especially the dbus-daemon and xorg related processes):
before any WM/DE is launched,
when awesome is launched and running,
when you log out from awesome,
when you log in again, trying to launch kde
Use tty2 to check for the processes, when you don't have a command prompt (ctrl-alt-F2).
Only by searching you could find a clue for the possible cause of the problem; it will be the learning way.
As far as I remember it, dbus-daemon is launched when the system boots up. When I log in as a new user (hence with working KDE) it automatically starts another dbus process for kde as the new user. If i try that as the old (broken KDE) user, no dbus is started (and hence the problem).
berbae wrote:...Or take the easy way: just use a new user and don't install awesome again if you don't want to use it!
That was already suggested by some people in irc. I would like to avoid that because of two reasons:
first, I find this very unclean and ugly, I would like to fix the problem at its root
and second, I am afraid, that I might break the permissions in my whole home directory and nothing works anymore.
What I am currently suspecting is that when I install awesome (and probably also log in) it runs some script that configures dbus per-user and that breaks compatibility with KDE. Could you imagine something like that? -
I managed to deploy and start the application fine now, but after i press "Go" button on the first screen, a new windows open with the following message
An error has occurred:
"Session has expired."
Web Dynpro product information:
Product: null, Vendor: SAP AG, Version: null, Build ID: 6.3004.00.0000.20040209174308.0000, Build Date: Thu Jul 08 18:00:54 CEST 2004
Error stacktrace:
com.sap.tc.webdynpro.clientserver.session.WDSessionExpiredException: Session has expired!
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.findClientWindow(ClientManager.java:696)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:186)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:130)
i've allowed all cookies in browser, but it didn't help. What else could be wrong ?Hi Marcin,
i guess, you are running the server on Win XP? WAS behaviour is a little bit different on XP machines, don't ask me why. Don't use "localhost" as hostname in the WD url, create an entry with ip=127.0.0.1 in the hosts file and use this as hostname in J2EE server configuration of Developer Studio and for WD urls. This should solve the problem.
Regards
Stefan -
SSRS 2012 Session Expired Error..
We have reporting environment with SSRS 2012 configured with forms authentication…
When users taking reports we are getting following errors randomly. We increased the valued of Query Timeout and Session Timeout in WebConfig. But still the error is persisting…Any one help us to resolve this issue?
microsoft.ReportingServices.Diagnostics.Utilities.ReportServerStorageException: , An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database.;
session!ReportServer_0-9!1070!08/11/2014-03:08:58:: e ERROR: Error in getting session data: Invalid or Expired Session: e3z2csibgn4kmbum1wm2cs2bHi Vichu,
According to your description, you encountered the timeout issue when rendering your report. Right?
In Reporting Services, sometimes this issue happens when rendering big report, and it exceed the default Query Timeout time. Generally, we increase the Query Timeout and Session Timeout so that it will have more time to retrieving data.
In this scenario, since you have done this adjustment and the issue still exists randomly. We suggest you optimize the performance of your report. Please refer to the articles below:
Processing large reports:
http://technet.microsoft.com/en-us/library/ms159638.aspx
Performance (Reporting Services):
http://technet.microsoft.com/en-us/library/bb522786.aspx
Improving report performance with caching:
http://technet.microsoft.com/en-us/library/ms155927.aspx
Report performance optimization tips:
http://blogs.msdn.com/b/robertbruckner/archive/2009/01/08/report-performance-optimization-tips-subreports-drilldown.aspx
In addition, we recommend you install the Updates for SSRS 2012:
http://sqlserverbuilds.blogspot.com/
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Can the system prompt a user friendly message like u2018Your session has been expired, please login again.u2019 instead of the error message 'HTTP Status 500'?
Hello Alex,
thats an Erromessage from the Tomcat. I think you can configure theses Errormessages in a web.xml File of the Tomcat but i`m not quite sure.
Regards
-Seb. -
Session expired error for single user
Hi,
I'm getting a SessionExpiredLongJumpException in our prod portal but only for one single user.
All other users can access the same page.
The defaultTrace log has a specifric time in the error message saying
'...or session has expired before Sat Jun 26 16:44:18 BST 2010' This seems very specific.
Any idea why this is happeneing?Check your browser settings for accepting cookies from this domain, you must have tried this by now clearing all your browser cache and cookies.
try solutions beacon site where they have Oracle Apps Demo Instances for Public
http://www.solutionbeacon.com/tools_vision.htm -
Session expired error not able to log in when restore !
Hi,
When user left screen unattended the session get expires and it would ask for two options Restore or OK when restore its asking for username and pssword but when credentials are entered user still not able to login. when open new session with the same credentials user could log in.
Could some help me with the solution for this.
Thanks in advance..
CheersCannot connect to iTune Store
http://support.apple.com/kb/ts1368
http://support.apple.com/kb/ts3297 -
Session Expired - iPhone SDk download
hi,
I am trying to download iPhone SDK but always get the Session Expired error.
Even when I am logged in.
How can I download the SDK?
Regards
SajidAnother victim here. Happily started downloading iphone SDK just after purchasing my new MacBook and it always stops at 2.1 GB. And of course it is corrupted.
For those who are thinking about OS or firewalls, here are my trials:
1. From my MacBook at home
2. From my HP laptop at home
3. From my desktop at home
4. From my HP laptop at work
5. From my Ubuntu at home
6. From my Ubuntu virtual machine at work.
Do you think it is still a client problem? Or the version on the server is corrupted?
Maybe you are looking for
-
Down Loading of data in Japanese Language from SAP R/3 30F to Flat file
Hi All, We need to Extract the data (like MM ,SD, FI, CO Modulus for reporting purposes) which is in Japanese from the R/3 30F to Flat file and the Upload from flat file to BW 3.5 When we try to down load some sample records ,the Japanese Characters
-
I was in a webpage and was trying to save it. I selected SAVE AS from the drop down menu. Then I entered the file name, and selected TEXT ONLY as file type. Only thing left to do was click SAVE, but there was no SAVE button.
-
Installation problem with the trial.
So recently i was thinking of installing the trial of Adobe photoshop CS5 extended so as i went through the installation form and language and system setting, but as i finish the form it took me to the download of "Adobe download Assistant" i install
-
Hi everyone, I was wondering how this Gallery was done, When mousing over the thumbnails, the larger image appears beneath. http://www.perrelink.com.au/portfolio/portfolio1.htm Would anyone have a tutorial, or advice on how thats done, Many thanks, T
-
RFC Adapter CC Maximum connection.
Hi Experts, In our scenario in RFC Communication channel the maximum connection parameters is blank. In that field there not specified any figure. so please can you tell me in that case how many connections it will take by default. Regards Prabhakar.