Session issue in shared folder

How many connection limit in windows 7 enterprise shared folder
i'm getting Session issue with shared folder

By default there is 20 connections limited to a folder. If that is decreased against the number of users, the issue occurs.
Balaji Kundalam

Similar Messages

In my system preferences, my sharing folder will not let me access it. All my photo booth share button is grayed out. One more thing, My photoshop will not let me import any photographs. I believe this all has to do with this. Any way to fix this issue?

In my system preferences, my sharing folder will not let me access it. All my photo booth share button is grayed out. One more thing, My photoshop will not let me import any photographs. I believe this all has to do with this. Any way to fix this issue?

The iTunes Store has no phone support and never has. Contacting them has always been via web form. Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

Permissions Issue with the "Shared" Folder

Hello,
I’ve been encountering what appears to be an odd bug concerning permissions, notably during the use of the “Shared” folder (/Users/Shared). And I’ve looked around to find solutions, but haven’t come across a similar problem. Hence the post.
Here’s how it works—or, rather, how it doesn’t work. Two people are using one computer (a MacBook Pro running 10.6.3) and would like to share documents, being able to read and write to them.
From what I can understand, any document created in a folder should take on that folder’s access privileges. Since the permissions for the “Shared” folder indicate “Read and Write” privileges for all three groups (Me, staff, everyone), then any document created therein should, in principle, allow members of all three groups to read and write to it.
Well, to cut a long story short, it doesn’t. Whenever a document is created in the “Shared” folder (with Pages or TextEdit, for example), the “Get Info” window shows that only the user who created it has “Read and Write” privileges. Members of the other two groups only have “Read” privileges.
I ran the “ls –l” command in Terminal on the “Shared” folder, and here is an example of the output for one of the files:
–rw–r– –r– –@ 1 username staff 342 31 Jan 17:08 Test.rtf
As far as I can understand, this shouldn’t be happening. I’ve tried logging out and logging back in, rebooting, and repairing permissions from the original installation disk (no problems detected), but nothing changes and I still encounter the same scenario.
Has anyone run across this issue before? And would anyone know what might be wrong, or even how to fix it?
Thanks to anyone who might be able to shed some light on this detail to help me understand what is going on here.
Best regards,
Stephen

I suppose you are working on the Mac?
Which version of the OS?
Go to the finder, hold down the ALT key and call G, there select the User Library (the one without a shortcut, this entry is without the ALT key not visible).
Check the permissions of the preferences folder. Select the folder CMD+I
You must have permission to read and write.

E4200 v1- problem creating a shared folder for the FTP server.

Hi,
I'm trying to share an external USB harddrive (4TB- HFS+) that is attached to my e4200 router. I'm trying to set up the FTP server, but when I try to create a shared folder, I get kicked out of the browser based interface for the router just as I'm trying to save the new shared drive. I have tried many different things to get it to work: different computers (PC and Mac) different browsers, reflashing the firmware (which is version 1.0.06, build 3), I tried all of this with an NTFS formatted drive as well- everytime I try to set up the shared folder- right as I hit the save button it kicks me out saying: Session Failure.
I can see my drive on the local network, and I know the FTP server is working, because I can log into it from the outside- but I don't see anything shared, when I do.
I have successfully gotten the media server to work using the same drive- but I can't create shared folder there either... It seems to have shared the entire disk automatically when I first connected the drive to the router.
Anybody have anything else for me to try?
Help!

Same problem. Has anyone found a solution? I contacted tech support and got nonsense responses. I was of course asked to Factory Reset even though I told them I had done it before I called - classic brush off. Basicly here is the problem.
1. I cannot create a share on a USB connected HDD - this worked on the older Firmware. Now every time I try to set up the shared folder- right as I hit the save button it kicks me out saying: Session Failure. I am not the only person with the problem. Crazy thing is I had a share created and it worked after the upgrade. I wanted to add an additional share and now it wont share anything. HDD plugged into my PC works great. I was asked to try a different PC - even though I told them I tried from IE, Chrome, Firefox on a Windows 7, Vista, windows XP, IPad, Kindle and Samsung phone.
2. While troubleshooting with the agent I discovered that although I have remote access disabled in the Administration>Management page but I can still access the router remotely. This is a huge security issue.
3. Linksys is no longer a Cisco Company - if the code is this bad Belkin should take the Cisco logo out of the GUI. Don’t blame Cisco for your poor SW.
I am ready to buy a new router and avoid Linksys and Belkin all together in light of these issues.
Additionally, I would simply downgrade but the older Firmware is not available. When I asked for it I was told I could not get it.

Java Applets cannot work in IE when PAC file is in shared folder

I have a PAC file (proxy auto config) residing in a shared folder, i.e. \\fileserver\share\proxy.pac. My IE and firefox is configured to point to the PAC file. Java applet is working fine in Firefox but fails to run in IE.
From the Java console, the applet seems to be trying to access the internet via DIRECT connection. The applet works properly when I configured IE to point to a PAC file in a web server, ie http://webserver/proxy.pac or in the local drive, ie file://c:\proxy.pac. My objective is to configure IE to point to a PAC file in a shared folder and make it work. Can anyone help?
Below are the logs from both IE and Firefox Java Console (thrimed):
1) IE:
Java Plug-in 1.6.0_13
Using JRE version 1.6.0_13 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\xxx
network: No certificate info for unsigned JAR file: https://internet-banking.dbs.com.sg/IB/Login2.jar
network: Cache entry found [url: https://internet-banking.dbs.com.sg/IB/Login2.jar, version: null]
network: Connecting https://internet-banking.dbs.com.sg/IB/Login2.jar with proxy=DIRECT
network: CleanupThread used 299461 us
network: Connecting http://internet-banking.dbs.com.sg:443/ with proxy=DIRECT
network: Connecting https://internet-banking.dbs.com.sg/IB/Login2.jar with proxy=DIRECT
network: Connecting http://internet-banking.dbs.com.sg:443/ with proxy=DIRECT
java.net.ConnectException: Connection timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.connect(Unknown Source)
     at sun.net.NetworkClient.doConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.protocol.https.HttpsClient.<init>(Unknown Source)
     at sun.net.www.protocol.https.HttpsClient.New(Unknown Source)
     at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.getNewHttpClient(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
     at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
     at sun.plugin.PluginURLJarFileCallBack.downloadJAR(Unknown Source)
     at sun.plugin.PluginURLJarFileCallBack.access$000(Unknown Source)
     at sun.plugin.PluginURLJarFileCallBack$2.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.plugin.PluginURLJarFileCallBack.retrieve(Unknown Source)
     at sun.net.www.protocol.jar.URLJarFile.retrieve(Unknown Source)
     at sun.net.www.protocol.jar.URLJarFile.getJarFile(Unknown Source)
     at sun.net.www.protocol.jar.JarFileFactory.get(Unknown Source)
     at sun.net.www.protocol.jar.JarURLConnection.connect(Unknown Source)
     at sun.plugin.net.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
     at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFileInternal(Unknown Source)
     at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.access$600(Unknown Source)
     at sun.misc.URLClassPath$JarLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.misc.URLClassPath$JarLoader.ensureOpen(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
     at sun.misc.URLClassPath$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getResource(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader$2.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.plugin2.applet.Plugin2ClassLoader.findClassHelper(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
network: Connecting https://internet-banking.dbs.com.sg/IB/Login2.jar with proxy=DIRECT
network: Connecting http://internet-banking.dbs.com.sg:443/ with proxy=DIRECT
2) Firefox:
Java Plug-in 1.6.0_13
Using JRE version 1.6.0_13 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\xxx
network: No certificate info for unsigned JAR file: https://internet-banking.dbs.com.sg/IB/Login2.jar
network: Cache entry found [url: https://internet-banking.dbs.com.sg/IB/Login2.jar, version: null]
network: Connecting https://internet-banking.dbs.com.sg/IB/Login2.jar with proxy=HTTP @ mocwsg01.m1.com.sg/10.33.90.91:8080
network: CleanupThread used 306588 us
security: Loading Root CA certificates from C:\Program Files\Java\jre6\lib\security\cacerts
security: Loaded Root CA certificates from C:\Program Files\Java\jre6\lib\security\cacerts
security: Loading SSL Root CA certificates from C:\Program Files\Java\jre6\lib\security\cacerts
security: Loaded SSL Root CA certificates from C:\Program Files\Java\jre6\lib\security\cacerts
security: Loading Deployment SSL certificates from C:\Documents and Settings\xxx\Application Data\Sun\Java\Deployment\security\trusted.jssecerts
security: Loaded Deployment SSL certificates from C:\Documents and Settings\xxx\Application Data\Sun\Java\Deployment\security\trusted.jssecerts
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Checking if certificate is in Deployment denied certificate store
network: ResponseCode for https://internet-banking.dbs.com.sg/IB/Login2.jar : 200
network: Encoding for https://internet-banking.dbs.com.sg/IB/Login2.jar : null
network: Disconnect connection to https://internet-banking.dbs.com.sg/IB/Login2.jar
basic: Applet loaded.
basic: Applet resized and added to parent container
basic: PERF: AppletExecutionRunnable - applet.init() BEGIN ; jvmLaunch dt 1677884 us, pluginInit dt 1844261 us, TotalTime: 3522145 us
basic: Applet initialized
basic: Removed progress listener: sun.plugin.util.GrayBoxPainter$GrayBoxProgressListener@15ee671
basic: Applet made visible
basic: Starting applet
basic: Applet started
basic: Told clients applet is started

Did you ever resolve this issue ? We have recently moved from a http based pac file to using file://netlogon share/proxy.pac. Recievng similar errors as you describe with various applets. Seems to work ok when using the same pac file launched by http rather than file. Seems to be various BUG's marginally related to similar issues but nothing to confirm that its a real problem.
Be great if anyone has an answer to this.
Thanks

Connecting to A Windows XP Shared Folder

I looked around and I must not be good at searching because this seems like it had to have been asked before. so my apologies up front if it was.
We recently moved and I lost my shared folder connection from my Mac to my windows xp machine and I haven't been able to reset it. I found articles describing how to connect, but I keep getting an error.
http://www.mac-connect.com/winfrommac.php
When I do that, my mac can not find my pc on the network whether I browse, use ip address or computer name. It looks for a while and then I get an error message that says "The Finder cannot complete the operation because some data in smb://ip address could not be read or written. (Error Code - 36).
I have disabled all firewalls I know about and set up the "My Documents" folder to share. But I still can not figure it out. I have Windows OS X (10.4.1).
Message was edited by: gremmie
Message was edited by: gremmie

Hi
I feel for you - I've been having the same problem except that I AM able to connect to my Mac via my PC - just not the other way around.
The really annoying thing is I'm not interested in connecting from my PC to the Mac, I just want to connect from the Mac to the PC.
There is an answer in Mac help, but it hasn't solved my problem. I'm not an IT expert at all, so I haven't the faintest idea what the solution is. Mac help says this occurs when upgrading from Mac OS X 10.3 to 10.4 but I've always had 10.4 and for me it only happened after I uploaded security updates - although I'm not sure which update caused it.
This is from Mac help, maybe it will work for you:
Symptoms
Mac OS X 10.4: Error -36 alert displays when connecting to a Samba or Windows server
After upgrading from Mac OS X 10.3.x to Mac OS X 10.4, you may get an error message when you try to connect to a Samba or Windows (SMB/CIFS) server. A Samba or Windows (SMB/CIFS) server includes servers operating on Microsoft Windows and other operating systems that use Samba for SMB/CIFS services.
If the connection is unsuccessful, the following error message may appear:
The Finder cannot complete the operation because some of the data in smb://........ could not be read or written. (Error code -36).
If you check the Console (/Applications/Utilities/), you will also see this error message:
mount_smbfs: session setup phase failed
Resolution
This error can occur if your Mac OS X 10.4 client is trying to connect to a Samba or Windows (SMB/CIFS) server that only supports plain text passwords. If you do not see the above message in the Console, you are not experiencing this issue and should try normal troubleshooting
Unlike Mac OS X 10.3, the Mac OS X 10.4 SMB/CIFS client by default only supports encrypted passwords. Most modern Samba or Windows (SMB/CIFS) servers use encrypted passwords by default, while some Samba servers might have to be reconfigured.
You should consider contacting the owner or system administrator of the Samba or Windows (SMB/CIFS) server to which you are trying to connect and encourage them to disable plain text passwords and start using encrypted ones. If the server cannot be reconfigured to support encrypted passwords, you can configure Mac OS X 10.4 SMB/CIFS client to send plain text passwords.
Warning: If you configure your computer to allow connections to Samba or Windows (SMB/CIFS) servers using plain text passwords, when you attempt to make any connection to such a Samba or Windows (SMB/CIFS) server, your password will be sent "in the clear". This means that it is possible for someone who is monitoring your connection to see your password. This could lead to someone compromising the Samba or Windows (SMB/CIFS) server. We strongly recommend that you configure your Samba or Windows (SMB/CIFS) servers to exclusively use encrypted passwords.
Follow the steps below to configure your computer to use plain text passwords to make SMB/CIFS connections when the specified Samba or Windows (SMB/CIFS) server does not support encrypted passwords. (You must be an administrator to do these steps.)
Make sure that you are not currently connected to any Samba or Windows (SMB/CIFS) servers and that you do not have any Samba or Windows-related error messages open.
Open the Terminal (/Applications/Utilities/).
At the prompt, type: sudo pico /etc/nsmb.conf
Press Return.
Enter your password when prompted, then press Return again.
You should see an empty file and a "New File" notice at the bottom of the pico window. If you do not see the "New File" notice, this file already exists.
Enter the following into the file so that it appears as follows:
[default]
minauth=none
Save the file (press Control-O), press Return, then exit pico (Control-X).
Type: sudo chmod a+r /etc/nsmb.conf
Press Return.
Restart your computer.

How do i Secure & recover file from shared folder

Hi All,
I have Windows server 2008 R2 environment and one shared folder created on this with restricted permission by file sharing & security, now 1. I want to add one more restriction that owner of the folder should not able to delete that file? If this is
not available with Microsoft then
2. How do i recover file which deleted from MAP drive...
Please help me to resolve this issue...
Kalpesh Chauhan

As to your first problem, I am not so familiar. But, as to the second problem, I think I can help.
In fact, I have ever also accidentally deleted my hard drive files. In order to re-access them, I have also posted my question in forums, just like you. Fortunately, after browsing many related answers and threads, I just know that a third
party data recovery program can be a good chance to go on.
So, I follow some instructions in these forums and select three drive recovery freeware to go on, including Recuva, iCare Data Recovery Free and TestDisk and so on.
Finally, I have restored all my needed data back successfully with these freeware.
So, I hope it will also help you out.
PS: Never forget to back up everything important on different hard drives or places in case of any similar data recovery problems in the future.

Hyperion Smart Cut Session Issue streaming multiple reports at a time using

This is a lengthly post with details, Please review with Patience:
We are trying to integrate Workspace based web Analysis reports within our intranet portal, thru portlets (made from individual workspace smartcut link), so that users can customize their page as needed, Once they login thru intranet, Cookie is set and passed to succeeding smart cut links via secured http headers. This part is fine, but mainly running into issue with streaming several multiple web-analysis reports at a time,+ we are using Iframe to display and stream multiple individual reports on to one page, but unfortunately all Iframes are sharing one session rather than creating individual session, mostly because of limitation of current web analysis system architecture and IE browser behavior with sessions .
Which Hyperion reporting tool does allow to stream multiple reports at a time? ideally we want to create Iframe of each workspace report so that users can customize and pick portlets as needed. To stream multiple reports at a time.
Problem Description: Hypeiron Web Analsysis, Smart cut reports incorrectly rendering images and intermixing dash boards on POV changes upon multiple reports being diplayed at one time thru Iframe's, issue seem to mostly relate to Hyperion using single session rather to multiple session when displaying several web reports at a time.
Steps Needed To Reproduce:
User logs into workspace.
user click on expolore and able to view the report without any issues.
When right on any of the report and select properties.
Select the SmartCut url and paste it in the Internet explorer.
The webanalysis report opens without any issues.
Similarly user copies the smartcut url for a different report and paste the link on a different tab or new window of same browser.
The report on the first tab gets over written of the report of the second tab of the browser.
The issue happens when two different reports and opened on a browser with multiple tabs. The reports get over written.
Oracle development answer:
In the described scenario opening new browser window does not spawn a separate independent browser session. A new browser window is supplied with URL pointing to the same domain, so all browser cookies including the "ORA_WA_SID" (WA session cookie) are shared between the windows. But multiple application instances cannot run in the same browser session simultaneously because of session sharing. This is not actually a defect, but rather a limitation of current system architecture and browser behavior. And there is no way to fix it programmatically on the product side.

Hi MeHyper,
Your current arrangement puts most of the session handling and persistence on the client. This forces you to accept whatever the client decides to persist and propogate between browser elements (in this case iframes).
My approach would be to:
Consider coding your portlets to manage the sessions. Manage using a somewhat stateless strategy so that each request to the server requires a login and connect, retrieve, and disconnect. Each Iframe should access a different portlet url (or provide a different query) based on its content.
This way, in theory, you can invalidate the sessions and related cookies and update the various report elements independently.
Is smartview out of the question here?
Regards,
Robb Salzmann

ITunes sharing among iPhones with different Apple ID's one computer WITHOUT home sharing, shared folder, etc...

I feel like I am losing my mind, here. A few things I want to clear up before you read my question:
No, I am not new to Apple. Yes, I understand that Home Sharing works for any group of devices authrized with my Apple ID. Home Sharing is not my issue.
1. My wife and I have different iPhones with different Apple IDs.
2. We only have one computer, on which iTunes is running under my Apple ID.
3. My iTunes library is far too large to paste into a shared folder. I keep my source folder on a 1TB external hard drive (not enough space on my iMac).
I just want her to be able to plug in and copy music onto her phone from iTunes. Home sharing is great while she's at home on the wifi, but not when she leaves. I created her own user name on my computer, set her iTunes (under her Apple ID) to pull from my library source file, and she can play everything fine, except that she cannot click and drag files onto her phone.
Any assistance would be appreciated.

iTunes Match is associated with one, and only one, iTunes Store Apple ID and country-specific store. The service cannot be shared between Apple IDs.
Indy Apple Guy wrote:
If we sign up for iTunes with the one account with the majority of the songs, is Home Sharing no longer available to the other two accounts?
Of course it is. iTunes Match has no affect on Home Sharing.
Indy Apple Guy wrote:
A. What happens to the songs on the other two libraries? Can we never use them?
It is possible to consolidate the tracks from the other iTunes libraries into one and use that for iTunes Match. Make sure the one computer that hosts the library is authorized to play any protected content.
Indy Apple Guy wrote:
C. If we purchase songs/albums while in iTunes Match, and then decide not to use Match in the future, do we lose all our music?
Of course not. Any purchases go to the purchase history for the Apple ID that bought them and as long as the tracks are downloaded and backedup you'll have them as long as you maintain them. Keep in mind that iTunes Match is a service; you don't do anything "in" iTunes Match. It simply "is" in the background.
Indy Apple Guy wrote:
D. If we associate our child's iTouch, will it still keep the parental controls in place so it won't play certain songs that are not appropriate f
Yes, parental controls should continue to work as they have. Although I do not use them, perhaps someone else with experience will weigh in.
Message was edited by: Michael Allbritton

When accessing shared folder - 'You might not have permission to use this network resource" .. A device attached to the system is not functioning

On a Windows 2008 R2 server that had been working fine, all of a sudden some shared folders became inaccessible. Clicking on them returned the following: "<Folder> is not accessible. You might not have permission to use this network
resource. A device attached to the system is not functioning."
If I create another share with a different name for that same folder, it works fine. If I delete the original share then recreate it with the same name, I get the same error. However, if I right click on the problematic share and select 'map
network drive' that works. So this would not appear to be a permission issue.
I discovered this problem because the path for mapping the home folder as a property of their AD account stopped working.
I have tried most of the common things found on the internet. I've tried accessing via IP, same issue. While I only have a couple 2003 servers, those can access this resource.
At this point, I'm pretty much out of ideas. Any help would be appreciated. I also have some reports of potential issues with some printer mappings too which I will have to investigate in the morning.
If anyone has a solution to this I would be extremely grateful. Thank you.

Hi,
Can you access the shard folder locally? Is a specific server cannot access the shared folder? Please try to Boot your server in Clean Mode to check if some third-party software cause the issue.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can no longer connect to shared folder via Samba (10.5.8)

I used to be able to connect to shared folders on my leopard (10.5.8) PPC machine via Samba.
Now, when I choose "Go to Folder..." from another machine and enter the correct URL (smb://192.168.0.XXX), I get a list of all the volumes and users, including public folders of some users, but the share point (shared folder) I defined does not appear.
I tried moving that folder around (it was in /Users/Shared/, then I put it at root / ), removing and re-adding, turning file sharing and samba off and on multiple times, and restarting the computer.
Nada.
Any ideas?

It seems I resolved this by changing the name of the folder I wanted to share, and adding that. No idea why it didn't like the previous name, but that seems to have worked around whatever the issue may have been.

I can no longer see dvd or cd sharing option on Sharing folder

After having installed DVD or CD sharing, I am no longer able to find "DVD or CD sharing" on Sharing folder. Thus, I can't click it - obviously - and cannot access remote CDs or DVDs either.
Then, I tried to reinstall the software as Apple tell us to do, but I pops up a message "a newer version of DVD or CD sharing is already installed on your computer."
So that, I'm stuck. I can neither erase the files nor reinstall it.
Hope Apple could give us a hand.
I'd appreciate if anybody knows something that might help.
Thanks!

Can no one help me with this issue? I can see all videos in iTunes, but not through Home Sharing.
Thanks

I have run the gambit of Home Sharing Trouble Shooting and still have no shared folder on my Touch. WTH?

I'm at a loss. I have done everything on Apple's Troubleshooting list to try to access my laptops music files on my Touch, but there is still no Shared folder in the More section of my Touch's music. I've restarted and updated everything, unathorized and reauthorized both devices, toggled home sharing on/off, allowed the relevant ports to pass through my router's Firewall, and have turned off the Firewall on my laptop. Nothing. Nada. It is a 4th gen Touch. ***.
Does anybody have a hail mary of an idea to get this freaking home sharing to work on my Touch? Grrrr.

So. When i turn search for my library from my ipad the little grey boxes appear with the names of the tv shows on them before the artwork is loaded. but on the 5 shows im having an issue with they remain blank.
I then deleted thhe 5 shows from my library and then re added one ofthem only changing the info-name to aaaaaaa and changing it from a home movie to tv programe. This did work for a short while. the name appeared on my ipad with the correct tv show cover. then after about a minute the name went blank and the album cover changed to a cd in my music library.
I had a similar issue with some of my other tv shows. i.e. when i tapped american dad on my i pad, there was 2 little boxes that said no season. so i clicked on the top one and it was just the pilot. so i went in to itunes to investigate and in the metadata the artist had been filled in as (1). so i deleted the number from the artist pane and that sorted that issue out. i checked the rest of the tv programs and there were a few issues but using the same method that sorted them all out.
I then went back to sort out the other 5 shows out. i ticked every box in the metadata to clear everything and put the show name as show 1. and changed from home video to tv program. when i added the show again the same thing happened. Appears with no show name. then after a minute it changes the picture again. Ill keep posting updates until its fixed. cheers

Home Sharing Folder Empty on all client PC's on Home Network

I have Home Sharing 'on' on all my local PC's (3 of them). I can see the Shared Folder on each of my PC's in iTunes, but when I click on the folder from a non-host PC, NO songs, movies or TV Shows appear! Folder and sub folders (music, movies, TV shows, etc,) are all empty.
Home Sharing DID work just fine for a year. But sometime within the past month or two - perhaps after an iTunes "update" - it no longer works. All settings checked - "shared" my Library in Preferences, turned on Home Sharing on each PC, all are on the same simple home network. And again, the Shared Folder IS visible on each PC - there is just no content in the folder! I am offically stumped. Please help.
Thanks in advance.

Hey ArnoDWG,
Thank you for the question, and welcome to Apple Support Communities.
I understand that you are having issues with home sharing, and that these issues are isolated to your PC. I also want to thank you for providing information about your security software, as this may be the cause.
For more information, see the following resource:
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
While the entire article provides great help, the most relevant information may be Section 5: "Check Firewall Settings":
If you have a firewall enabled in your router or computer, make sure that the firewall is not blocking communication between your computers. Home Sharing uses TCP port 3689 and UDP port 5353 to communicate with shared iTunes libraries.
In addition, Apple TV and Mac computers will use port 123 to set the time automatically. Incorrect date and time on either the computer or Apple TV can cause errors for Home Sharing and connections in general.
If you are unsure whether your router has a firewall or the required ports open, test additional devices or another network to help isolate the issue. If the devices tested work on another home network, it is your router or network configuration.
If you use another security/firewall software on your computer or router, follow this article or contact the manufacturer or check the documentation on how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
Thanks,
Matt M.

HP 8500 ALL IN ONE - CAN NO LONGER SCAN TO SHARED FOLDER

I have had an HP 8500 all in one scanner / printer for a while and have not had any problems with,
Yesterday the printer hung so I reset it.
I am using ethernet (wired) as opposed to wireless.
When I reset the printer it gave it a new ip address of which I reconfigured back to the address of my network ie 192.168.7.xxx
I am able to print and scan from the embedded printer web page but when I scan to my shared folder, the printer cannot conect.
Does anyone have any ideas?
I think it may be something either to do with the network path or possibly the sharing permissions fo the network folder.
Thank you in advance for any assistance that can be provided.

Hello there @DAVIDA64, welcome to the forums
I read through your post about the issues you are having with scanning to your network folder. My best suggestion would be to check out the guide below and set up your scan to network folder again.
HP Officejet Premier 8500 (A909n) and Wireless 8500 (A909g) All-in-One-Printers - Set up and Use Dir...
Best wishes, have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Session issue in shared folder

Similar Messages

Maybe you are looking for