Session.LoggedIn state fails after Adobe Acrobat upgrade 7.08

After a couple of my users installed the acrobat reader 7.08
upgrade; every time they open a browser window (IE) in our
corporate portal (CFMX7) application they are prompted to login
again. It appears that their session state is being wiped out. My
helpdesk has verified that by uninstalling acrobat reader 7.08 and
installing acrobat reader 7.08 without installing any of the
acrobat plug-ins the portal application works again. We check in
application.cfm for "Session.LoggedIn". Anyone know of why this
reader upgrade would mess with session variables?

Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

Similar Messages

Delete AcrobatStd_11_Web_WWMUI after adobe acrobat install?

Can I delete AcrobatStd_11_Web_WWMUI after adobe acrobat install? It seems to be only the download program / extractor. It's over 400,000 KB in my documents library folder, so I would prefer to delete it if it's not needed after install. Thanks.

Hi BolderArchitecture
If the acrobat has been installed Successfully , You can delete the Installer file.

Content Index State Failed - After every restart on 2010 mbx server

I noticed that everyone is saying just to run the catalog only command on any database that gets
Contnt index state failed after a restart. but what if you are faililng over 30database and 20 of them get corrupted? run this commadn 1 by 1? really?

Thanks
wawoodwa , this command solved my problem!!!
On other sites I found command:
"Update-MailboxDatabaseCopy –Identity ‘DB2’ –CatalogOnly" it was not working, I got the same error as OldSchoola.

Message received after Adobe Acrobat X Standard reinstall - Update failed Error 1007

Adobe Acrobat Error 1007
Updates have been disabled by your system policy
HELP!! The situation:
Windows 7 Professional 32-bit .
The product was uninstalled and then reinstalled.
After the reinstall, it never asked for a EULA acceptance, a re-registration or a re-activation.
It would open a pdfs for about 6 seconds and then close out.
If you tried to do updates from the menu in the program, it would give this error:

This alert was created by a JavaScript code (as you can see from the title of it), which someone obviously did not write very well.
You should be able to open it if you disable JS (Edit - Preferences - JavaScript), and then you can remove this code completely (if the file is not secured).

Adobe Acrobat upgrade has destroyed the signature and in the IE a certified web site displaying

I have encountered a very strange, but exactly the same phenomenon on my desktop PC and laptop. (W XP Professional, SP3, IE8)
The Adobe Acrobat (v.9.4) has been upgraded with the online refreshment process on both PC and now I can not use a web site at all
on both PC.
In the IE when I start the URL the popup windows with Certificate selection appears normally, but when I accept
it after that I have the below screen:
Translation:
The IE can not display the web page.....
Possible steps: diagnose the connection problems
Additionally my own created signature in both Acrobat has been damaged too. When I
want to use the signature I get an error message:
Translation:
The Windows encryptioning service has indicated an error:
The object does exist.
Error code: 2148073487
I tried to uninstall - reinstall the Acrobat as well as the signature, but did not fix the problem.
Does someone have any idea what could be the problem and how I could restore the functionalities?

I will not be able to upload any forms as it is propietary information, but here are the steps taken to create the form using Adobe Acrobat Pro X or XI:
Open the PDF in Adobe Pro and click Tools.
In the Forms menu, click Edit.
Click Add New Field > Text Field.
Place the field on the document and edit the field name with the text [MAGICWORD]. This is a magic word that allows the signed form to be saved in the right location.
Click the All Properties link.
Change the Form Field from Visible to Hidden but Printable under Common Properties.
To add other visible magic word fields (optional), click Add New Field > Text Field.
Click Add New Field > Digital Signature.
Click Add New Field > Button.
Click the All Properties link.
Click the Actions tab.
Under Add an Action:
Select Trigger – Select Mouse Down.
Select Action – Select Submit a form.
Click Add.
Enter the URL:(https://anythingcangohere.com)
This enables the signed form to be submitted and saved in the right location.
Under Export Format, select PDF The complete document.
Click OK.
To add a label to the button, click the Options tab.
Label: – Enter Submit to athenaNet or Submit.
Click Close.

All Podcast Producer Jobs Failing After Snow Leopard Upgrade

First, and most importantly, all Podcast Producer submissions are failing after upgrading to Snow Leopard. These seem to fail in the mail stage.
I have a second problem that makes this worse: When I enter Server Admin -> Podcast Producer -> Settings -> Properties, I can not see any properties. I know that these settings are somewhere, since when I open the XML file in <Shared File System>/Server/Jobs, the resulting file has information that should be here, however some of it is incorrect. I'm not sure what got changed, since I can't see all of the properties in the PP panel in Server Admin.
Thirdly, I can see no Workflows available in Podcast Producer, even the new ones that are supposed to be available in Snow Leopard.
So, I would at least like submissions to actually not fail, which was not the case before the upgrade. I would also like access to all of the properties and workflows available in the Podcast Producer administration part of Server Admin.
Has anybody else experienced this? Is there a way to fix this?

After installing SL, i cannot get wellsfargo "account login" to work for any account of mine, other financial secure sites work fine, i.e. fidelity or vanguard, I can access the main screen of wellsfargo but login fails ... screen i get says Safari can't connect to the server and as follows: "Safari can’t open the page “https://online.wellsfargo.com/das/cgi-bin/session.cgi?" plus some more gibberish stuff.... i tried switching to firefox and it works fine .... never had any trouble before ..... tried safari reset, safari empty cache, and maintenace that applied ...... still no luck!! hope they get this bug fixed , my other computer an older mac mini works fine. any help????? never had any problem before SL

AIA 2.0.1 O2B Order synchronization fails after the SOA Upgrade to 10.1.3.4

Hi,
I have the AIA 2.0.1 installed on the system with the Order to Bill PIP flow working fine until I upgraded the SOA Suite from 10.1.3.3 to 10.1.3.4.
After the SOA upgrade the order synchronization from CRM(8.1.1) to BRM(7.3) fails with the error message
"exception on JaxRpc invoke: HTTP transport error: java.net.MalformedURLException: no protocol: eis/BRM"
I have checked the Application Server for the availability of BRM Adapter.
The BRM Adapter is available and properly configured. The JNDI Location for the BRM Adpater is eis/BRM itself.
Can anyone please help resolve this issue.
Thanks in Advance

Don't upgrade your Leopard clients. While running Xsan 1.4.2 on G5 Xserves running 10.4.11 works, it is preferred to keep your server running a newer OS than the clients. Again, Mac OS X 10.5.2 does work with Xsan 1.4.2 and MDCs running 10.4.11 but who knows if an upgrade will break this? Alternatively you could buy a couple seats of Xsan 2 and change your controllers to be newer intel Macs (Mac Pro or Xserve).

Oracle Report Failing After Database Version Upgrade

Hi,
I have function code created in RDF file of oracle reports 10g as below-
create or replace function clobblobtest (TMP_MID varchar2) return varchar is
missed_text varchar2(1000) := '';
v_time_stamp date;
v_end_time date;
cursor c1(c_time_stamp in date,
          c_mid in varchar2) is
       select mn.TEXT from msgnotes mn
where mn.mid=c_mid
      and mn.create_date >= c_time_stamp;
cursor c2(c_time_stamp in date,
          c_mid in varchar2,
          c_end_time in date) is
       select mn.TEXT from msgnotes mn
where mn.mid=c_mid
      and mn.create_date >= c_time_stamp
      and mn.create_date <= c_end_time;
begin
IF ('1' = 'INWARD RETURN') then
    select bbi into missed_text from mtf1000 where mid=TMP_mid;
    ELSIF '1'='QPH Missed' then
Select max(nj.update_date) into v_time_stamp
from newjournal nj
where nj.mid=TMP_mid and nj.status = 'CTOVRQ';
for i in c1(v_time_stamp,TMP_mid) loop
missed_text:=missed_text||' '||i.text;
END Loop;
ELSIF ('Rejected'='Rejected' OR 'REJECTED'='REJECTED') then
IF ('TERMINATED' in ('TERMINATED')) THEN
Select min(nj.update_date),max(nj.ENDDATE) into v_time_stamp,v_end_time
from newjournal nj
where nj.mid=TMP_mid and nj.actionid2='16' and nj.actionid1 is null;
for i in c2(v_time_stamp,TMP_mid,v_end_time) loop
missed_text:=missed_text||' '||i.text;
END Loop;
ELSE
Select max(nj.update_date) into v_time_stamp
from newjournal nj
where nj.mid=TMP_mid and nj.status = 'UNSETLED';
for i in c1(v_time_stamp,TMP_mid) loop
missed_text:=missed_text||' '||i.text;
END Loop;
END IF;
ELSE missed_text := null;
END IF;
return(missed_text);
End;
Note:- Text column from table msgnotes is of datatype CLOB.
I have executed report having this function before oracle upgrade and it works fine.
But when i am trying to execute report after oracle version upgrade from 11.2.0.3.0 to 11.2.0.4.0 with same data report fails with runtime error Rep-1401: '' Fatal PL/SQL Error.
With New version we tried to typecast Text column from clob to varchar and executed report then it works... but report runs on old version without any explicit typecasting.
Please note when i run and call this funtion from sql developer with upgraded database version it works fine.
Please advise.

This error can possibly depend on the fact that the PL/SQL engines are in different versions. When using SQL Developer you use the PL/SQL engine in the database. When using Oracle Reports you use the PL/SQL engine in the Oracle Reports Server (Web Logic Server even maybe). These versions - in the Forms and Reports realm - are different (read: a lower version) than the PL/SQL engine in the database.
If I check what version I have in Oracle Forms, as an example, I get 11.1.0.7.0 (Help in the Oracle Forms Builder menu) but in the database I have (select * from product_component_version;) 11.2.0.3.0.
That COULD be your issue...how to fix it I am not sure...

Latest Alert for Adobe Acrobat - Upgrade will not work, Any ideas???

Hi, When the issue with Acrobat first occured (ERROR MESSAGE: Licensing for this product has stopped working. You cannot use this product at this time. You must repair this problem by uninstalling and reinstalling this product or contact your IT Administrator or Adobe Customer Support), I did unistall and reinstall my Adobe Acrobat 9 Pro Extended, once finished reinstalling, the error kept reappearing. I also jumped onto the Adobe website and download the latest upgrade to fix this problem (http://www.adobe.com/ap/support/security/bulletins/apsb09-04.html), but the problem keeps continuing.
Any thoughts or ideas will be much appreciated. I have tried every combination of tricks and reinstalls etc and cant get it too work at all.
Sharmayne

Hi Micahel, thanks for getting back to me, just quickly (im not the very best with computers, but am ok), when you say to check the background processes, is that starting the task manager (ctrl+alt+delete) and clicking the processes tab to see if its running there? sorry, im just not too sure where to check for this.
thanks heaps, i appreciate the assistance.
Kind Regards
Sharmayne

DW crashing after Adobe Acrobat update

I recently updated Adobe Acrobat, as suggested by my Adobe updater. I didn't restart my computer right away and waited a few days before doing the actual reboot.
Almost immediately after I updated and rebooted, I started experiencing crashing in DW. (I RARELY had crashing issues at all, and typically they would happen only if I'd been doing heavy coding with multiple windows open, and without restarting my computer for a while...) Now, the crashing happens VERY frequently - for instance, while working yesterday evening I crashed more than a dozen times. Sometimes it was on a 'put', sometimes it was on a save - this morning, it was initiated by just opening a file. I was originally working some php code with the date() function, and that's when the crashes started, after that reboot.
Has anyone else experienced any issues with DW (I have CS5) since updating Acrobat? I suppose it could be something else, but I do know that's the only thing I've changed on my system prior to all these crashes.
Thanks for any help/suggestions!
Virginia

Running into the same issue over here. It seems like it has to do with applying a transform to the installation, so it could be related with a particular setting put in place using the Adobe Customization Wizard.
It's really kind of hit or miss, because it appears to affect those with previous versions of Acrobat or Reader installed, but that isn't always the case.
Had this happen to systems that haven't had any sort of Adobe product installed prior.
It's always the same thing too. Error 1603 is spit out after it can't remove select files in C:\Windows\Installer
After digging through the system, the files that it's looking to delete aren't even there to begin with.

802.1x Authentication has Failed after snow leopard upgrade

Hello Apple Community,
I have a mid 2009 MacBook 4 GB of RAM on INTEL CORE DUO 2.
I upgraded my OS X to 10.6 from 10.5.8 and after completing the upgrade I have not been able to use my Airport. Can anyone help me get this problem fix?
Paul

what is it saying? is there an error?
Maybe take a look at
http://www.esecurityplanet.com/views/article.php/3899996/How-to-Use-Enterprise-W iFi-Encryption-and-8021X-in-Mac-OS-X.htm

X-Windows fails after Every Major Upgrade: About to give up Archlinux

I have resigned myself to this behavior. I need to get Nvidia cuda toolkit working and after a major upgrade that effects X-windows I lose X.
Usually my fix is to reinstall nvidia drivers and cuda, sometimes successfully from aur but usually not. Well this time I'm stuck.
The proprietary driver won't work either, it wants kernel sources, but after installing them it still can't find them. Maybe they are there and I just need to supply some command line arguments, but I grow weary of this.
I just can no longer afford to waste hours and hours configuring low level BS to get my work done.
I'm going to step away from my console now and get some needed real work done. Does anyone want to talk me out of this? I'll probably blow away archlinux and replace it with ubuntu or maybe scientific linux if this persists.
I really wish Arch spent a little bit more time making sure that they would support drivers for the major vendors, e.g. AMD and Nvidia. Nvidia's cuda drivers really have problems with some of the latest stuff. Perhaps it's just a bad match and I should another distro. Not sure. Thoughts?

ewaller wrote:
I don't use Nvidia, so I cannot share your pain. I can say that all OSes require some level of maintenance. Some require it continuously. Others less so. Some require little for long periods, followed by re-installs. It seems the more control you have, the more effort is required. Some are walled gardens, some are driven by marketing departments, some by ideology.
For me, Arch is the compromise I need. A great deal of control. Never a need to start over from scratch. It does what I want, and I don't have to compile it from scratch. Were it not for Arch, I'd still be with Gentoo (the penultimate disto, IMHO)
Regardless, it is your system. YMMV.
Yes I liked the control Arch gave me and I liked the fact they were the first to get the latest stuff. I fully understand that this has consequences. Nvidia has to maintain support for their windows and probably MAC drivers first. So they are always a distro rev or two behind in their linux support. I'm surprised there isn't more whining about Nvidia support. Maybe my configuration is a little odd, and it's just working for most, but my gpu, motherboard and cpu are fairly standard, though possibly dated by a year or two.
Well I'm going to give it one more try before punting. I'll do some reading on how to install nvidia drivers first and see if I can make any progress.
Thanks for the input.

HT4528 Instragram app failed after the latest upgrade.

My instragram app failed after i installed the lastest update...help!!

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
You might try deleting and reinstalling the app
Contact the app vendor

OSD Request User State Storage fails after SCCM 2012 upgrade to R2

After SCCM upgrade from SP1 to R2 OSD fails on Request User State Storage. Error:
Task sequence: XXXXX has failed with the error code (0x00004005). For more information, contact your system administrator or helpdesk operator.
In smsts.log:
=================================
<![LOG[Certificate is a self signed certificate. It will not be checked for revocation or expiration.]LOG]!><time="09:27:37.133-120" date="03-14-2014" component="OSDSMPClient" context="" type="0" thread="5984"
file="smpclientutil.cpp:420">
<![LOG[Successfuly retrieved public key and verified signature.]LOG]!><time="09:27:37.133-120" date="03-14-2014" component="OSDSMPClient" context="" type="1" thread="5984" file="smpclient.cpp:2604">
<![LOG[Sending share info request message: <RequestStateStore><ClientID>GUID:BF0F737B-1834-4625-984C-5C9DE2391CFC</ClientID><Reserved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eserved2></RequestStateStore>]LOG]!><time="09:27:37.134-120"
date="03-14-2014" component="OSDSMPClient" context="" type="1" thread="5984" file="smpclient.cpp:2285">
<![LOG[Requesting SMP Root share config information from http://server.int.domain.com:0]LOG]!><time="09:27:37.290-120" date="03-14-2014" component="OSDSMPClient" context="" type="1" thread="5984"
file="smpclient.cpp:2348">
<![LOG[Received 3963 byte response.]LOG]!><time="09:27:37.333-120" date="03-14-2014" component="OSDSMPClient" context="" type="0" thread="5984" file="smpclient.cpp:2363">
<![LOG[Adding \\server.int.domain.com\SMPSTORED_39C7CA32$ to list ]LOG]!><time="09:27:37.367-120" date="03-14-2014" component="OSDSMPClient" context="" type="1" thread="5984" file="smpclient.cpp:2403">
<![LOG[Failed to connect to "\\server.int.domain.com\SMPSTORED_39C7CA32$" (1203).]LOG]!><time="09:27:37.440-120" date="03-14-2014" component="OSDSMPClient" context="" type="2" thread="5984"
file="tsconnection.cpp:340">
<![LOG[Failed to connect to "\\server.int.domain.com\SMPSTORED_39C7CA32$" (1203).]LOG]!><time="09:27:37.468-120" date="03-14-2014" component="OSDSMPClient" context="" type="2" thread="5984"
file="tsconnection.cpp:340">
<![LOG[Cannot connect to http://server.int.domain.com SMP root share]LOG]!><time="09:27:37.468-120" date="03-14-2014" component="OSDSMPClient" context="" type="3" thread="5984" file="smpclient.cpp:1754">
<![LOG[ClientRequestToSMP::DoRequest failed. error = (0x80004005).]LOG]!><time="09:27:37.468-120" date="03-14-2014" component="OSDSMPClient" context="" type="3" thread="5984" file="smpclient.cpp:1882">
<![LOG[Request to SMP 'http://server.int.domain.com' failed with error (Code 0x80004005). Trying next SMP.]LOG]!><time="09:27:37.468-120" date="03-14-2014" component="OSDSMPClient" context="" type="2"
thread="5984" file="smpclient.cpp:1590">
<![LOG[Sleeping for 60 seconds before next attempt to locate an SMP.]LOG]!><time="09:27:37.468-120" date="03-14-2014" component="OSDSMPClient" context="" type="1" thread="5984" file="smpclient.cpp:1565">
=======================
IIS log:
=======================
172.20.0.xx CCM_POST /SMSSMP/.sms_smp op=KeyInfo 80 - 172.20.6.yy SMS+CCM+5.0+TS 200 0 0 2281 2
172.20.0.xx CCM_POST /SMSSMP/.sms_smp op=RootShareInfo 80 - 172.20.6.yy SMS+CCM+5.0+TS 200 0 0 4088 29
172.20.0.xx OPTIONS /SMPSTORED_39C7CA32$ - 80 - 172.20.6.yy Microsoft-WebDAV-MiniRedir/6.1.7601 200 0 0 206 19
172.20.0.xx PROPFIND /SMPSTORED_39C7CA32$ - 80 - 172.20.6.yy Microsoft-WebDAV-MiniRedir/6.1.7601 405 0 0 1496 1
172.20.0.xx PROPFIND /SMPSTORED_39C7CA32$ - 80 - 172.20.6.yy Microsoft-WebDAV-MiniRedir/6.1.7601 405 0 0 1496 1
======================
Allow clients to connect anonymously enabled on DP
On SMP file share permissions enabled for everyone
Any suggestions where to look?

Hi,
Please try to access
\\server.int.domain.com\SMPSTORED_39C7CA32$ using Network Access Account from the workstation you working on.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Canon MF4370 network printing fails after 10.6 upgrade

Have been using a Canon MF4370dn printer for the past year with a desktop PC, notebook PC and two MacBook Pro. Printer was connected via Ethernet cable to our AT&T wireless router. MacBook Pro running 10.5.x was able to print via AirPort WiFi just fine. After upgrading to 10.6 and replacing the router with an Airport Express I discovered both MacBooks are no longer able to print via the network. I have tried several solutions posted on this board for various Canon UFRII printer problems, but nothing is working.
Here are some relevant setup and diagnostic details:
* Mac OS X 10.6.5
* Firewall is turned off
* Canon UFR II v2.20 driver (followed prior version uninstall procedure from manual multiple times)
* Added printer first via Bonjour, then via IP address and LPD
* Able to access printer management interface via web browser
* Able to print from desktop PC via Ethernet cable and from laptop PC via WiFi
* Able to print from MacBook Pro connected via USB. UFRII print monitor gives error "Cannot monitor this printer with the current connection."
* Unable to print from two MacBook Pros connected either via Ethernet cable or Airport WiFi. Print command returns 10322 error "Cannot communicate with the printer" and UFRII print monitor gives error "Printer not responding."
I would appreciate any additional ideas!
Thanks in advance.

Hello and welcome to Apple Discussions.
First of all I would like to complement you on the work you have done so far. Under most situations I would have expected you to resolve your issue with all that you have done.
The clue for getting this to work is the UFR2 Printmonitor. Once it can communicate with the MF then the driver will function.
From your information I believe that the UFR2 Printmonitor could be still looking for the previous setup when the MF was connected via the AT&T router. When you manually delete the UFR2 driver including "UFR2.BG.plist" this does not work correctly when the service is still running. You will see the 'UFR II Backgrounder' service via Activity Monitor.
So I suggest that you open the UFRII Printmonitor and then click on the Printer menu. You may see the MF4370dn with a USB icon next to it from the previous USB connection. And it should also show the MF4370dn with a network icon next to it. What you want to do is update this network 'link' to the current network connection and that can be done by pressing 'Search for Printer'. Nothing will be visible on the display when this completes so leave it a couple of seconds and then open the UFRII Printmonitor > Printer menu again. If you now select the MF4370dn entry shown with a network icon this should now show a connection to the printer rather than a not responding error. If this does work then you can exit Printmonitor and try printing.
If it still fails to print then delete the MF printer queue and manually remove the UFR2 driver files again, this time adding the extra step of Force Quitting the UFRII Backgrounder service via Activity Monitor. Then restart the Mac and run the v2.20 UFR2 installer again and then add the printer via LPD.
See how that goes and reply if needed.

Session.LoggedIn state fails after Adobe Acrobat upgrade 7.08

Similar Messages

Maybe you are looking for