Session "Microsoft Security Essentials OOBE" stopped due to the following error: 0xC000000D using win 7 64bit over and over BSOD
Session "Microsoft Security Essentials OOBE" stopped due to the following error: 0xC000000D using win 7 64bit over and over BSOD
My event viewer has been coughing the error line above. It has lead to the feeling of a Carotid Artery leak of memory where my whole
system slowly stops working till BSOD. Windows Explorer just stops working then Death.
I HAVE HAD THIS HAPPEN MORE AND MORE, AND IT APPEARS TO BE A PROGRAM PROBLEM, ANYBODY ELSE HAVE THIS.
IT HAS COST ME 2 DAYS WORK NOW.
MIKE
Hi,
When does the issue begin to occur?
Since Windows system uses separated user mode and kernel mode memory space, stop errors are usually caused by kernel portion components, such as a hardware device,
third-party drivers, backup software or anti-virus services (buggy services).
Please refer to the following steps to troubleshoot the issue.
1. Boot the computer in
Clean Boot for a test.
2. Temporarily disable all unnecessary hardware devices in Device Manager, such as Modem, sound card or external device.
For detail steps, we can refer to the link below:
Device Clean Boot
3. Upgrade the virus definition, run antivirus program and perform a full scanning.
If the issue persists, please upload the minidump file (%systemroot%\minidump) to SkyDrive (
www.skydrive.live.com ), then share the link to me. I will be glad to assist you to analysis the data.
Thanks,
Novak
Similar Messages
-
Bsod Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D
I have a t540 with all hardawre and software updates running Win 7/64 pro and get this message repeatedly. Microsoft says to delete MSSEOOBE.etl but that file doesn't appear to be in the 64 bit version of Microsoft Security Essentials
If it happen when the PC is in SLEEP mode it causes an abnormal shutdown/recovery when the PC restarts Did uninstall and reinstall MSE
One MS thread says to contact the OEM - so here I am.
I was also getting Code 10 Disk Errors but there was a MS KB fix for that
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 5/29/2014 8:39:03 AM
Event ID: 3
Task Category: Session
Level: Error
Keywords: Session
User: SYSTEM
Computer: bill-THINK
Description:
Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>3</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>14</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2014-05-29T13:39:03.627614300Z" />
<EventRecordID>209</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="212" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>bill-THINK</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SessionName">Microsoft Security Client OOBE</Data>
<Data Name="FileName">C:\ProgramData\Microsoft\Microsoft Security Client\Support\EppOobe.etl</Data>
<Data Name="ErrorCode">3221225485</Data>
<Data Name="LoggingMode">5</Data>
</EventData>
</Event>
Any thoughts? I guess I will try another AntiVirus but Microsoft Security Essential is running on 2 other Win 7 laptops
ThanksHi,
Regarding the error messages mentioned here, have you checked the below thread?
Microsoft Security Client OOBE stopped
due to the following error: 0xC000000D
Please take a try with the methods suggested by the others above.
Best regards
Michael Shao
TechNet Community Support -
Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D
i keep getting this Event in my event viewer and dont know what to do. Could use any help
Hi,
Regarding the error messages mentioned here, have you checked the below thread?
Microsoft Security Client OOBE stopped
due to the following error: 0xC000000D
Please take a try with the methods suggested by the others above.
Best regards
Michael Shao
TechNet Community Support -
Microsoft Security Client OOBE stopped due to the following error: 0xC000000D
I keep getting this error in my event Viewer and I removed Microsoft Security Client a few weeks ago and replaced it with Bitdefender 2012
Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D
I am also getting these aswell...
Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications.
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0811960D92F5. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the
network address (DHCP) server.
A problem prevented Customer Experience Improvement Program data from being sent to Microsoft, (Error 80004005).If you do not want to reinstall Microsoft Security Essentials to stop this problem, there is a step which you MUST, I repeat, MUST follow. As indicated above by Zuhl3156, YOU MUST, again, MUST shutdown the security counter. This is a problem
when you uninstall MSE, it does not remove the security counter. This is the reason that everyone says to delete the C:\ProgramData\Microsoft\Microsoft Security Client\Support\EppOobe.etl file. This file is used and created by this counter.
If you have uninstalled the MES, then you MUST delete the C:\ProgramData\Microsoft\Microsoft Security Client\Support\EppOobe.etl. But, MOST IMPORTANTLY, you MUST go into into Computer Management and drill down into:
System Tools -> Performance -> Data Collector Sets -> Startup Event Tracing Sessions
Then, in the frame to the right on that window, select Microsoft Security Client OOBE, right click on it and select Properties. Then DISABLE it (uncheck the Enabled box). Then, when you select OK, if you have uninstalled MSE and NOT reinstalled
it, the entry in the right frame will 'magically' disappear.
This is a problem with the uninstall of MSE and needs to be resolved by Microsoft (hopefully they are reading this). It has taken me DAYS to discover this, and many different attempts to resolve this. But, apparently, this has now resolved my
problem. I have seen performance counters cause many problems in my experience with Windows, and am very confident that this resolves the issue.
I cannot thank Zuhl3156 enough for his suggestion and my willingness to try it (I noticed 'performance counter' and jumped on it). It seems to work wonderfully for the moment.
I hope this helps someone else who has spent days trying to chase this nightmare down.
Jim -
Session "EventLog-Microsoft-Windows-MBAM-Diagnostic" stopped due to the following error: 0xC0000188
Hi team,
I find following event logs in my event viewer. It's quite annoying though nothing abnormal happens. I wanna know the root cause and how to fix that.
Session "EventLog-Microsoft-Windows-MBAM-Diagnostic" stopped due to the following error: 0xC0000188
My box is
Windows 8.1 64
I can provide more information if you need it.
Thanks,
-J
Keep involved!did recently you facing issue with autoshutdown or any power related and PC still attached to any 3rd party USB device?
This issue addresses as normal behavior and don't affected your Windows
https://support.microsoft.com/en-us/kb/2001347/
The logging of this error will not affect the operation of your computer. ReadyBoot is used by the ReadyBoost service that optimizes the boot time of your computer to a minimum
this ready boost service normally start when you attached 3rd party removable drive or device, you can disable it if you want. This option will not applicable if you installed SSD
http://www.sevenforums.com/tutorials/33289-readyboost-setup-use.html -
Session "ReadyBoot" stopped due to the following error: 0xC0000188
Just built a new system and every once in a while my computer hangs logging into windows.
i7 2600k
16 gigs/ram
Intel 320 Series SSD x2 in RAID 0
GTX 580
Overview of event logs shows the following.
Intel(R) 82583V Gigabit Network Connection
Network link is disconnected.
Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D
A timeout was reached (30000 milliseconds) while waiting for the ASUS Com Service service to connect.
The ASUS Com Service service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events
cannot be delivered through this filter until the problem is corrected.
The maximum file size for session "ReadyBoot" has been reached. As a result, events might be lost (not logged) to file "C:\Windows\Prefetch\ReadyBoot\ReadyBoot.etl". The maximum files size is currently set to 20971520 bytes.
Session "ReadyBoot" stopped due to the following error: 0xC0000188
On Asus connect I changed this service to delayed start I believe it is for my motherboard updates. Superfetch is disabled. My page file is not on my SSD drive but on my regular sata drives configured in RAID 5. It doesn't do this everytime I reboot just
seems like it happens after my computer has been on for a while and I turn it off for a few hours and turn it back on to log into windows (put in my password it says welcome) and it takes several minutes to log in.
Tried to do a little research on this but I am turning up 50/50 stuff on rather or not readyboost/superfetch should be on or off and I guess this is what is causing it.... maybe I dont know for sure. Looking for proper information.
ThanksI apologize I have not responded sooner. Also I wanted to wait for it to happen again and compare logs from that time and this time because it still happens.
Activation context generation failed for "c:\program files\microsoft security client\MSESysprep.dll".Error in manifest or policy file "c:\program files\microsoft security client\MSESysprep.dll" on line 10. The element imaging appears as a child of element
urn:schemas-microsoft-com:asm.v1^assembly which is not supported by this version of Windows.
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.
This error is
repeated three times. I have vmware workstation installed I am actually going to uninstall it and move it to spinning drives and get it off my SSD drives.
The
description for Event ID 1000 from source vmauthd cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2012-01-20T07:58:27.786-06:00| vthread-4| W110: TicketLimitFileAccess: Successfully added access-allowed ACE to file's DACLthe message resource is present but the message is not found in the string/message table
Intel(R)
82579V Gigabit Network Connection
Network link is disconnected.
Intel(R) 82579V Gigabit Network Connection
Network link is disconnected.
Name resolution for the name wpad.westell.com timed out after none of the configured DNS servers responded. (im having internet provider issues today so this can be ignored)
Session "Microsoft Security Client OOBE" stopped due to the following error: 0xC000000D -
"Microsoft Security Essentials OOBE
Session "Microsoft Security Essentials OOBE" stopped due to the following error: 0xC000000D
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
hi guys,
ive been getting tons of this messages in my event log viewer!!
any clues?
Kind regards,
RRYou could try this, to solve the issue:
1. Go to Start and type ”performance” - click on the Performance Monitor. Then, on the left side, go to Data Collector Sets - Startup Event Trace Sessions. Search for Microsoft Security Client OOBE on the list.
2. Double click it and go to Trace Session tab - uncheck ”Enabled” (if you want to disable the trace) - this will not hurt your system; OR, if you do not want to disable it, follow step 3.
3. After double-clicking it, go to the File tab and check ”Circular”; after that, go to Stop Condition tab, check Maximum size and set the value to 5 (Mb) - the circular option means that the file will be overwritten when it reaches the maximum file size
(which is 5 Mb). This will make sure the error does not appear again. If this does not work, try disabling the trace (step 2).
Have a nice day! :) -
Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
JukkaHi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights. -
I keep getting this strange error logged as Error event id 2. Note session string is blank "". Any ideas?
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 24/12/2009 09:08:20
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: SYSTEM
Computer: George-XXL
Description:
Session "" failed to start with the following error: 0xC000000D
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime="2009-12-24T09:08:20.835299100Z" />
<EventRecordID>36</EventRecordID>
<Correlation />
<Execution ProcessID="1944" ThreadID="1948" />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>George-XXL</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SessionName">
</Data>
<Data Name="FileName">
</Data>
<Data Name="ErrorCode">3221225485</Data>
<Data Name="LoggingMode">5</Data>
</EventData>
</Event>Can you let us know if you get any Blue Screen crush error while using your comptuer?
Generally we can safely ignore the errors in the Event log. Aas we don't if you have get other issues in your computer, you can test your computer in the Clean Boot mode. This method will help us determine if this issue is caused by a loading program or service.
You can try the the following steps:
1. Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
Please test this issue in this Clean Boot environment, if the issue disappears in the Clean Boot environment, you can use the dichtomy to quickly narrow down which entry is causing the issue. You can refer to the
KB929135.
Good luck!
John
This is a very poor answer. This guy doesn't know what he's talking about because if you tell someone its ok to "safely ignore the errors in the event log" as a blanket instruction ESPECIALLY because as he stated so himself
he didn't know if there were other issues with the OP's pc then he's giving really bad advice. If you ignore errors in the event log then over time your system will degrade and you will have other issues.. Every error on your pc should NOT be ignored.
It should be decided on a case by case situation.
Furthermore this is an error involving the Windows Session which it states has failed. Definitely should NOT be ignored.
I've got the same error which has suddenly just showed up. No BSOD, Do not have WHS installed and all my media center connectors have NEVER been connected. I don't believe this is a service issue. I think it has something
to do with kernel event tracing.
Of course, it's just my opinion....I could be wrong! -
IP Helper Service causes Session "" failed to start with the following error: 0xC000000D
I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session "" failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
Does anyone know how to fix this issue? I know I could disable the service but I prefer not to do it.
Thanks
AlbertoHi,
IP Helper (service name 'iphlpsvc') is apparently designed to improve a Windows PC's support for IPv6 network protocol.
I suggest you try enable the dump collection by copying following words into notepad, saving it as dump.reg and importing it:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows Error Reporting\localdumps\iphelper.exe]
"DumpFolder"=hex(2):63,00,3a,00,5c,00,63,00,72,00,61,00,73,00,68,00,64,00,75,\
00,6d,00,70,00,73,00,00,00
"DumpCount"=dword:00000010
"DumpType"=dword:00000001
"CustomDumpFlags"=dword:00000000
Once the error appears again, please find the crashdump file under c:\.
Regards,
Kelvin hsu
TechNet Community Support -
An unhandled exception occurred and the process was terminated.
Application ID: /LM/W3SVC/1/ROOT/OPA
Process ID: 10296
Exception: System.TypeInitializationException
Message: The type initializer for 'Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCoreSingleton' threw an exception.
StackTrace: at Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCoreSingleton.Finalize()
InnerException: System.Runtime.InteropServices.COMException
Message: Retrieving the COM class factory for component with CLSID {01732742-D1A2-11D7-99EB-505054503030} failed due to the following error: 80040154.
StackTrace: at Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCore..ctor()
at Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCoreSingleton..ctor(String reserved)
at Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCoreSingleton..ctor()
at Microsoft.MSCOM.MemberServices.Passport.Interop.RPSCoreSingleton..cctor()
can any one help me with this?Try running the SharePoint Product Configuration Wizard and see if that clears up this issue.
Cheers
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries -
I have a outlook 2007 plugin created in VS 2008 that reads calendar meetings. This plugin also works with outlook 2010. I used to debug this application from VS 2010 as well.
Last month, I installed Office 365 to test something. Later I uninstalled this version but after that my plugin application is crashing, every time a new appointment/meeting is created in calendar.
I get the below error:
Unable to cast COM object of type 'System.__ComObject' to interface type 'Microsoft.Office.Interop.Outlook._AppointmentItem'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{00063033-0000-0000-C000-000000000046}'
failed due to the following error: Library not registered. (Exception from HRESULT: 0x8002801D (TYPE_E_LIBNOTREGISTERED)).
Tekriti SoftwareThanks for your sharing and have a nice day.
Yoyo Jiang[MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Can't launch itunes due to the following error; The procedure entry point AVCFPlayerAppliesMediaSelectionCriteriaKey could not be located in the dynamic link library AVFoundationCF.dll.
Hey bcolden,
I would try uninstalling and reinstalling following the directions in here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
This section in particular contains important information in the uninstall process:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Best,
Delgadoh -
OEM12c :: Agent has stopped monitoring. The following errors are reported : DISK_FULL
Hello sir,
I am new to EM12c Cloud Control.
Problem is that EM shows "Agent Unreachable" as status for an agent.
and also shows following error ::Agent has stopped monitoring. The following errors are reported : DISK_FULL.
Agent status is as follows:
E:\Agent_Grid\agent_inst\bin>emctl status agent
Oracle Enterprise Manager Cloud Control 12c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
Agent Version : 12.1.0.3.0
OMS Version : 12.1.0.3.0
Protocol Version : 12.1.0.1.0
Agent Home : E:/Agent_Grid/agent_inst
Agent Binaries : e:/Agent_Grid\core\12.1.0.3.0
Agent Process ID : 7164
Parent Process ID : 5816
Agent URL :
Repository URL :
Started at : 2013-11-20 11:58:25
Started by user :
Last Reload : (none)
Last successful upload : 2013-11-20 12:02:58
Last attempted upload : 2013-11-20 12:02:58
Total Megabytes of XML files uploaded so far : 0.06
Number of XML files pending upload : 0
Size of XML files pending upload(MB) : 0
Available disk space on upload filesystem : 1.15%
Collection Status : [COLLECTIONS_HALTED(
UPLOAD SYSTEM Threshold (UploadMaxDiskUsedPct: 98) exceeded with 98.84559)]
Heartbeat Status : Ok
Last attempted heartbeat to OMS : 2013-11-20 12:19:04
Last successful heartbeat to OMS : 2013-11-20 12:19:04
Next scheduled heartbeat to OMS : 2013-11-20 12:20:04
Agent is Running and Ready
I also found some help at
Agent has stopped monitoring. The following errors are reported : COLL_DISABLED|DISK_FULL | Sunkupuli DBA
but didn't help me.
Please, help How can Agent start Monitoring again?
Many Thanks in advanceFree disk space or Add disk space - such that the Disk usage is less than 95%
The Agent Collections will be re-enabled (when Disk usage falls below 95%)
Wait for a few minutes; the Agent and Host Targets should now be shown Up in Console.
Symptoms are almost similar to MOS note 1501904.1 -
We started getting this error when we installed Lync Server. I already verified that the "RTCHSUniversalServices" group has “Replicating Directory Changes" permission.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
A client made a DirSync LDAP request for a directory partition. Access was denied due to the following error.
Directory partition:
DC=<domain>,DC=com
Error value:
8453 Replication access was denied.
User Action
The client may not have access for this request. If the client requires it, they should be assigned the control access right "Replicating Directory Changes" on the directory partition in question.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Domain Controllers and Lync server are running on Windows 2008 SP2. Any other things that I could check?A client made a DirSync LDAP request for a directory partition. Access was denied due to the following error.
Directory partition:
DC=<domain>,DC=com
Error value:
8453 Replication access was denied.
User Action
The client may not have access for this request. If the client requires it, they should be assigned the control access right "Replicating Directory Changes" on the directory partition in question.
oas4ever
Maybe you are looking for
-
My new iPad 2 touch screen will not swipe right and left
Have tried several web pages. Cannot swipe right or left
-
bonjour ,j ai un probleme j ai fais un montage avec i photo pour un livre et impossible de vous le commander merci d avance mr mirland
-
Mac Support (and general support)
Hello there, You already know that we will be happy if you add Audition to your feature CS packages. I can not find any good reason for why it's not done in CS3/CS4?! MOST IMPORTANT - Why there is no Mac version of this program? AND NO, Soundbooth is
-
Cd that came with PSE 10 "Classroom in a book to down load?
I have a dvd burner on my computer. I set the path according to instructions in the book. I am trying to copy lesson 1 from the disk. It will open lesson 1; but it does not copy.
-
M board와 BNC connector(2120)의 사용관련
M series board와 Traditional DAQ함수로 짜여진 Labview program을 사용하고 있는데, BNC connector (2120)에 연결하면 input signal은 detection되지만 signal output이 안됩니다. 이런 경우 어떻게 해야하나요? signal output이 제대로 작동하는지 확인할 방법은 없나요?