Session variable problem : equality comparisons

I have defined the following session variable returning the error *"[nQSError: 10058] A general error has occurred. [nQSError: 42040] The session variable, NQ_SESSION.TEST, is defined as Row-Wise Initialization. It is restricted to usage with equality comparisons. (HY000)"*
select 'TEST', organisatie_nummer
from st_organisatie
where (select case when regio = -1 then 1 else
regio_nummer end
from st_gebruikers
where upper(gebruiker) = upper('VALUEOF(NQ_SESSION.USER)')) =
(select case when regio = -1 then '1' else regio end
from st_gebruikers
where upper(gebruiker) = upper('VALUEOF(NQ_SESSION.USER)'))
Why this setup...a user can have access to 1 region or 'ALL' region. To make the 'ALL' available a dummy records has been inserted with a value of -1.
There's no problem to retrieve the region (another session variable), it returns '%' in case a user has all regions or the region name itself.
But i wanted to use this variable to retrieve the organisations linked to a region, but using a like statement or the query above isn't possible as it always returns the same error.
Someone any idea how to resolve this?!
Txs,
Andy

[nQSError: 10058] A general error has occurred. [nQSError: 42040] The session variable, NQ_SESSION.ORGANISATIE, is defined as Row-Wise Initialization. It is restricted to usage with equality comparisons. (HY000)
I transformed my query like this, I don't have any clue why this isn't working...if I run this sql statement it works perfect but not in OBi
select 'ORGANISATIE', organisatie_nummer
from st_organisatie
,(select gebruiker,regio from st_gebruikers) b
where case when b.regio = -1 then 1 else regio_nummer end
like
case when b.regio = -1 then '%' else b.regio end
and upper(gebruiker) = upper(':USER')

Similar Messages

  • OBIEE Session Variable Problem

    Hi:
    OBIEE 11.1.1.5
    I created a new session variable and initialization block. The default value of the variable is 1. The query for the initialization block is SELECT 123456 FROM DUAL. The query in the initialization block tested fine. I bounced the OBIEE instance.
    When I use the Administration Tool to view the Session Manager, I see that the value of the variable is 123456.
    The problem is in an Answers report the value of the variable is 1.
    Can anyone offer a suggestion as to why the value in Answers is the default value of the variable?
    Thanks.

    Thanks for your reply. I agree that the expression NQ_SESSION. <<variable name>> will display the variable. And it is with this command, in Answers, that I see the default value. Only in the Admin Tool do I see the correct value assigned with the Initialization Block.
    Again, my problem is I cannot display the correct assigned value in an Answer report, only the default value.

  • Login Session Variable Problem

    I've created a simple login using the inbuilt DW suite, but I don't seem to be able to display the session variable after they login.
    On the success page it should filter the RS based on the Username and also display the Username etc on the page but nothing is shown. I tested the success page in DW and entered a value for the session var and it works fine, all I can think of is that the session is empty, not coming through, but I'm clueless.
    Any ideas?
    <<<<<LOGIN PAGE>>>>>
    <?php
    // *** Validate request to login to this site.
    if (!isset($_SESSION)) {
      session_start();
    $loginFormAction = $_SERVER['PHP_SELF'];
    if (isset($_GET['accesscheck'])) {
      $_SESSION['PrevUrl'] = $_GET['accesscheck'];
    if (isset($_POST['UserName'])) {
      $loginUsername=$_POST['UserName'];
      $password=$_POST['Password'];
      $MM_fldUserAuthorization = "";
      $MM_redirectLoginSuccess = "login_successful.php";
      $MM_redirectLoginFailed = "login.php";
      $MM_redirecttoReferrer = true;
      mysql_select_db($database_connpbxlogin, $connpbxlogin);
      $LoginRS__query=sprintf("SELECT UserName, UserPassword FROM Users WHERE UserName=%s AND UserPassword=%s",
        GetSQLValueString($loginUsername, "text"), GetSQLValueString($password, "text"));
      $LoginRS = mysql_query($LoginRS__query, $connpbxlogin) or die(mysql_error());
      $loginFoundUser = mysql_num_rows($LoginRS);
      if ($loginFoundUser) {
         $loginStrGroup = "";
        //declare two session variables and assign them
        $_SESSION['MM_Username'] = $loginUsername;
        $_SESSION['MM_UserGroup'] = $loginStrGroup;     
        if (isset($_SESSION['PrevUrl']) && true) {
          $MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
        header("Location: " . $MM_redirectLoginSuccess );
      else {
        header("Location: ". $MM_redirectLoginFailed );
    ?>
    <<<<<SUCCESS PAGE>>>>>
    $colname_LoggedRS = "-1";
    if (isset($_SESSION['MM_Username'])) {
      $colname_LoggedRS = $_SESSION['MM_Username'];
    mysql_select_db($database_connpbxlogin, $connpbxlogin);
    $query_LoggedRS = sprintf("SELECT * FROM Users WHERE UserName = %s", GetSQLValueString($colname_LoggedRS, "text"));
    $LoggedRS = mysql_query($query_LoggedRS, $connpbxlogin) or die(mysql_error());
    $row_LoggedRS = mysql_fetch_assoc($LoggedRS);
    $totalRows_LoggedRS = mysql_num_rows($LoggedRS);
    ?>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>Untitled Document</title>
    </head>
    <body>
    </p>
    <p>username: <?php echo $row_LoggedRS['UserFirstName']; ?></p>
    <p>email: <?php echo $row_LoggedRS['UserEmail']; ?></p>
    <p>Session Data:
      <?php echo $_SESSION['MM_Username']; ?></p>
    </body>
    </html>
    <?php
    mysql_free_result($LoggedRS);
    ?>

    Does your success page begin with session_start()?

  • Set up a Session Variable

    Hi,
    How to setup a session variable of User id in PHP in
    Dreamweaver Style. Is it possible to assign the session variable
    value equal to user id from the recordset......if yes i need the
    procedure. Thanks in advance.

    prashi123 wrote:
    > How to setup a session variable of User id in PHP in
    Dreamweaver Style. Is it
    > possible to assign the session variable value equal to
    user id from the
    > recordset......if yes i need the procedure.
    There is no "Dreamweaver style" for setting up a session
    variable. You
    do it in exactly the same way as for any PHP page. Put this
    at the
    beginning of the page:
    session_start();
    Retrieve the value that you want from the recordset and
    assign it to a
    session variable like this:
    $_SESSION['user_id'] = $row_recordsetName['user_id'];
    David Powers
    Adobe Community Expert
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    http://foundationphp.com/

  • Problem with Session variable initialization block

    Hi,
    I'm getting strange results when using session variables in my repository files.
    I have created session variables as specified in the document which is available at
    http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/bi_admin/biadmin.html
    The main problem getting with the system session variable (USER) in the select statement.
    My select statement is as follows,
    select ':USER',case when upper(':USER') = 'KUMAR' then 'APR-05' end from Dual
    The problem is while logging into the BI Answers it is allowing all the invalid users to login who does not exist.
    when i remove the quotes and simply use :USER in the select statement it is not allowing the invalid users to login but giving error while displaying the results.
    when i remove the user variable from select statement its giving correct results.
    Can i know what is causing the problem.
    Thanks,
    Kumar.

    Hi DK,
    Check out my post Rowlevel Security?? and see if it helps you.
    Cheers!
    -Joe

  • Problem with session variable

    Hi,
    After I insert a record into my MS Access database, it seems
    to me that the session variable got destroyed so the next page
    display the session variable as undefined. Has anyone have similar
    problem? If so, how to work around that?
    Thanks.
    Tommy,

    neptunes wrote:
    but its leading to jsp page error...For starters: never, never, ignore errors (exceptions and stacktraces). Those contain very, very, worthful information about the cause of the problem and what exactly went wrong. This way you can easily trackback the problem and solve it.
    If you're unable to think logically and smart so that you can interpret the error yourself, if necessary with help of Google, then post it here. Then we'll tell you about the actual problem and possible soltions.
    At any way:
    iam displaying some data in a table using resultset object,now at the same time iam using to session variable to use the resultset object in my other applications...This already doesn't sound very good. You should never pass expensive resources around like that. You should acquire and close the Connection, (Prepared)Statement and ResultSet in the shortest possible scope. Preferably already in the same method as where you query the data.

  • Problem retrieving Session variables in Flex from Coldfusion

    For about a year I've been using a cfc that allows me to remote call from within Flex to retrieve session-level variables.  I much prefer this to using FlashVars because with the remote call the session values don't show up in the page source.
    This was working fine when I was using an Application.cfm file to manage my Coldfusion pages.  However when I switched to using an Application.cfc file, the cfc stopped working.  Neither the cfc or the cfm file contain any code to manage these session variables (they are set in other pages), so the only real difference seems to be changing from Application.cfm to Application.cfc.
    Any thoughts why?  Thanks.

    Ok, this is resolved.
    The problem seems to have been related to the scope of Application.cfc and Application.cfm.  The directory which contained the cfc files had an Application.cfm controlling the session, while the directory with the pages that included the flex swf files had an Application.cfc file.  Apparently these two don't talk to each other.
    The solution is to use either Application.cfc or Application.cfm files, but not to mix them.  In other words, use either -- but be consistent.

  • Problem in session variables

    hi ,
    Is it not correct to assume that ones we close the browser the session losts and all the session variables also?
    Actually i have design an authentication page which takes userid and password from user and supply this to servlet which after authentication sets a variable "validity" in session to true.
    And in every other jsp page first i m checking this variableis true or not if not then i m redirecting it to authentication page with this tag
    <jsp:forward page="authentication.jsp" />
    now if i have authenticated correctly and close browser and try to access other pages directly then browser allows me to access any page and infact when i print "validity" variable from session then it prints true. That means even after closing the browsing session remains.
    I tried to print session id then after opening a new browser it is showing the same browser.
    In web.xml file i have mentioned the session time to 60 minutes . Is it because of this?. If it then how these standard sites sun, yahoo maintains session time out as well as browser dependent session.
    Right now what i have to do is before setting the variable i have reset the variable to null. But wher shud i reset the validity variable . in destroy method?
    manish

    Your problem is not due to session time out in the xml
    file.
    I think whenever you close your browser the session
    does not exists.
    Remember to invalidate the session while logging off.
    It should workThat is not true. The session will exist for as long as the session timout option is set. Although invalidating the session at logoff is a good idea, there is no real method to force people to log off when the leave your site/close the browser.
    There are a couple of possibilities why the session would still be used after a browser is closed, although normal behavior is to create a new one. The main reason is because the cookie on the browser that maintains the jsessionid is not destroyed. This often occurs in browsers like NS 7 with a "quick-load" app running in the taskbar area (next to the clock). These little parts of the application never close, and hold on to browser cache and cookies, so as to make it quicker to open and surf.
    How do you ge around this? I do not know, except perhaps by preventing the session from using cookies for tracking...

  • Purchased ColdFusion 10: Having problem with session variables

    My Dept. has just bought CF10 and I'm finally updating my existing web app to CF10 from CF8. My First Problem with CF10 is using session variables.
    When using the lower version of CF (since CF 4 to 8) I have never had any problem setting up session variables and getting or using these variables in other pages after a successful login but with CF 10 it seems setting session variables and using them in other pages are a major problems. I'm not sure where have I done wrong in the codes.
    First I'm setting the session in my Application.cfc This way:
    <cfcomponent displayname="Application" output="true">
      <cfset THIS.Name ="MyNewApp"/>
      <cfset THIS.ApplicationTimeout = CreateTimeSpan(0,0,20,0) />
      <cfset THIS.SessionManagement ="YES"/>
      <cfset THIS.SessionTimeout = CreateTimeSpan( 0, 0, 20, 0 ) />
      <cfset THIS.SetClientCookies = false />
    <cffunction name="OnApplicationStart" access="public" returntype="boolean" output="false">
    <cfset application.Main_DSN = "TESTDB">
    <cfreturn true />
    </cffunction>
    <cffunction name="onApplicationEnd" output="false">
          <cfargument name="applicationScope" required="true">
        </cffunction>
    <cffunction name="OnSessionStart" access="public" returntype="void" output="false" hint="Fires when user session initializes.">
    <cfset session.loggedin = "NO">
    <cfset session.username = "">
    <cfset session.userrights = "">
    <cfset session.usergroup = "">
    </cffunction>
    </cfcomponent>
    After login, user is validated and set values to those session.variables:
    ........user validation codes here......................
    <cfif mylogin NEQ true>
          <cflocation url="/login/login.cfm">
          <cfabort
    <cfelse>
          <cfset session.loggedin="Yes">
          <cfset session.username="#Trim(Form.username)#">
         <CFSET qUserRights = LoginObj.getUserRights('#Trim(Form.username)#')>
         <cfset session.userrights = qUserRights><!--- it's a query --->
        <CFSET qUserGroup = LoginObj.getUserGroup('#Trim(Form.username)#')>
            <cfloop query="qUserGroup">
               <cfset session.usergroup = user_group>
               <cfbreak>
            </cfloop>
        <!--- ****************** ???????????????????????????????????????????????????????????????????????????
        When I do cfdump in at this level, I can see that all of these session variables have been assigned to their values.
        But these session variables are not accessible from other pages. Other pages still show these session variable without its value.
        So, when I use these cfdumps in the index.cfm it is shown as they're not yet assigned with any values   ****************** --->
       <cfdump var="#session.loggedin#">
       <cfdump var="#session.username#">
       <cfdump var="#session.userright#">
       <cfdump var="#session.usergroup#">
    </cfif>
    In index.cfm, Before Login I got:
    session.loggedin = NO
    session.username = ["empty string"]
    session.userrights = ["empty string"]
    session.usergroup = ["empty string"]
    After a successful Login:
    session.loggedin = NO
    session.username = ["empty string"]
    session.userrights = ["empty string"]
    session.usergroup = ["empty string"]
    Have I done something wrong? These codes work on CF8. Please help.
    I need to mentioned:
    CF10 is in Linux and my web app is under https not http. But these session variables should be shared bentween http and https because some older application are still in http.

    On which page is the following code?
    After login, user is validated and set values to those session.variables:
    ........user validation codes here......................
    <cfif mylogin NEQ true>
          <cflocation url="/login/login.cfm">
          <cfabort
    <cfelse>
          <cfset session.loggedin="Yes">
          <cfset session.username="#Trim(Form.username)#">
         <CFSET qUserRights = LoginObj.getUserRights('#Trim(Form.username)#')>
         <cfset session.userrights = qUserRights><!--- it's a query --->
        <CFSET qUserGroup = LoginObj.getUserGroup('#Trim(Form.username)#')>
            <cfloop query="qUserGroup">
               <cfset session.usergroup = user_group>
               <cfbreak>
            </cfloop>
        <!--- ****************** ???????????????????????????????????????????????????????????????????????????
        When I do cfdump in at this level, I can see that all of these session variables have been assigned to their values.
        But these session variables are not accessible from other pages. Other pages still show these session variable without its value.
        So, when I use these cfdumps in the index.cfm it is shown as they're not yet assigned with any values   ****************** --->
       <cfdump var="#session.loggedin#">
       <cfdump var="#session.username#">
       <cfdump var="#session.userright#">
       <cfdump var="#session.usergroup#">
    </cfif>

  • Problem passing Session variable as URL parameter?

    Hi,
    I am trying to create a multiple page entry form using
    coldfusion session. But I am having some problem when passing the
    session variable to url parameter. For test purpose I have created
    the following code:
    <cfif Not IsDefined("SESSION.AE")>
    <!--- If structure undefined, create/initialize it
    --->
    <cfset SESSION.AE = StructNew()>
    <!--- Represent current form srep; start at one --->
    <cfset SESSION.AE.StepNum = 1>
    </cfif>
    <cfif IsDefined("Form.GoBack")>
    <cfset SESSION.AE.StepNum = #url.StepNum# - 1>
    <cfelseif IsDefined("Form.Next")>
    <cfset SESSION.AE.StepNum = #url.StepNum# + 1>
    </cfif>
    <html>
    <head>
    <title>Untitled Document</title>
    <meta http-equiv="Content-Type" content="text/html;
    charset=iso-8859-1">
    </head>
    <body>
    <form method="post"
    action="/AE/try.cfm?StepNum=#SESSION.AE.StepNum#">
    <input type="submit" name="GoBack" value="Back">
    <input type="submit" name="Next" value="Next">
    </form>
    </body>
    </html>
    When run it I get the following error:
    The value "" cannot be converted to a number
    The error occurred in C:\CFusionMX\wwwroot\AE\try.cfm: line
    11
    9 : <cfset SESSION.AE.StepNum = #url.StepNum# - 1>
    10 : <cfelseif IsDefined("Form.Next")>
    11 : <cfset SESSION.AE.StepNum = #url.StepNum# + 1>
    12 : <!---<cfset SESSION.AE.StepNum = #url.StepNum# +
    1>--->
    13 : </cfif>
    I couldn't figure out where is the problem. Any help is
    really appreciated.
    Thanks in advance.

    You are mixing up your gets and posts aren't you?
    You have your form method set to post which creates form
    variables not
    url variables. So when you try to use the url variable to set
    your
    session it does not exist.
    Change your SESSION.AE.StepNum = #url.StepNum# to
    Session.AE.StepNum =
    form.StepNum, note there is no need for the #'s.
    OR
    change your form method="post" to form method="get"
    Nagelia wrote:
    > Hi,
    >
    > I am trying to create a multiple page entry form using
    coldfusion session. But
    > I am having some problem when passing the session
    counter to url parameter. For
    > test purpose I have created the following code:
    >
    > <cfif Not IsDefined("SESSION.AE")>
    > <!--- If structure undefined, create/initialize it
    --->
    > <cfset SESSION.AE = StructNew()>
    > <!--- Represent current form srep; start at one
    --->
    > <cfset SESSION.AE.StepNum = 1>
    > </cfif>
    > <cfif IsDefined("Form.GoBack")>
    > <cfset SESSION.AE.StepNum = #url.StepNum# - 1>
    > <cfelseif IsDefined("Form.Next")>
    > <cfset SESSION.AE.StepNum = #url.StepNum# + 1>
    > </cfif>
    >
    > <html>
    > <head>
    > <title>Untitled Document</title>
    > <meta http-equiv="Content-Type" content="text/html;
    charset=iso-8859-1">
    > </head>
    > <body>
    > <form method="post"
    action="/AE/try.cfm?StepNum=#SESSION.AE.StepNum#">
    > <input type="submit" name="GoBack" value="Back">
    > <input type="submit" name="Next" value="Next">
    > </form>
    > </body>
    > </html>
    >
    > When run it I get the following error:
    >
    > The value "" cannot be converted to a number
    >
    >
    > The error occurred in C:\CFusionMX\wwwroot\AE\try.cfm:
    line 11
    >
    > 9 : <cfset SESSION.AE.StepNum = #url.StepNum# - 1>
    > 10 : <cfelseif IsDefined("Form.Next")>
    > 11 : <cfset SESSION.AE.StepNum = #url.StepNum# +
    1>
    > 12 : <!---<cfset SESSION.AE.StepNum =
    #url.StepNum# + 1>--->
    > 13 : </cfif>
    >
    > I couldn't figure out where is the problem. Any help is
    really appreciated.
    >
    > Thanks in advance.
    >
    >
    >
    >

  • JSP Session in JavaScript variable problem

    Hi,
    I have a session variable msgSize that is being set by a Java file in the session.
    aRequest.getSession().setAttribute("msgSize", msgSize);It's value is variable depends on record count of recordset.
    In JSP page where I have to assign it's value to a javascript variable. I am doing this a s follows. I have done this in the JSP file.
    <script type="text/javascript" >
    <!--
    function getVal()
    m=${msgSize};
    -->
    </script>First Problem is I am unable to get this value inside a External JS file. It throws error but inside jsp it is working. How can i use this inside External JS?
    Second problem is once the above code executed value never refreshed to new value?
    Means first time it executed it get value 200 next time again i executed the code the real recordset is 105 but still displaying 200. But when I restart the server next time it takes value 105 by itself....
    How I tackle this problem.?
    Regards,

    problem is I am not refreshing the whole JSP page everytime, only refreshing the partial page using ajax call that's why not getting the session new value...
    any suggestions what to do to get new value?

  • Problem accessing session variables in JSP

              Hi all,
              i am retrieving the value of session variables in a JSP page. the session varibale
              is set at the
              server side. sometimes the jsp is able to retrieve the value and sometimes it
              doesn't.
              Thanks & Regards
              Tarun
              

    if getAttribute return null so there is no such session attribute,anyway
              check your browser if cookies are enabled.
              "Tarun Mangal" <[email protected]> wrote in message
              news:400759e9$[email protected]..
              >
              > Hi all,
              > i am retrieving the value of session variables in a JSP page. the session
              varibale
              > is set at the
              > server side. sometimes the jsp is able to retrieve the value and sometimes
              it
              > doesn't.
              >
              > Thanks & Regards
              > Tarun
              

  • Problem accessing session variable from jsp

    Hi!
    I get an error retrieving a session variable from inside a JSP declaration scriptlet....
    Something like this code in a JSP page:
    <%!
    public void funtion1() {
    String parameter1 = session.getAttribute("parameter1");
    %>I have seen that I have available getContextServer() method and from there I could call getAttribute("parameter1") . But the thing is that the attribute I want to retrieve was stored in session by another Jsp page.
    Any solutions are welcome
    Cheers
    Victor

    Appropriately the above is one the reasons also You cannot use JSP implicit objects from the declaration tag. However we can think of a small workaround by passing the reference like the one discussed below
    <%!public void funtion1(HttpSession session) {
    String parameter1 = session.getAttribute("parameter1").toString();
    }%>
    <% funtion1(session);%>Hope that helps :)
    REGARDS,
    RaHuL

  • Problems accessing session variables from a pop-up

    I am working on a webapp and I when I click on a certain button I need to have a pop-up appear that will either prompt a user to enter log-in info if they haven't already, otherwise the pop-up just needs to display a report. Users can navigate around on the main page and select various reports so multiple pop-ups could possibly be opened. When a user logs in I save the login info in session variables, but for some reason whenever I click to have another pop-up open it always says that my session variables are null. Is there a way to have more global session variables so that multiple windows (the pop-ups) can touch session variables? Would there be a way to pass the login info in session variables back to the main page and then pass those session variables back out to each pop-up that opens? Thanks so much.

    Have you got session cookies enabled?
    The most common way to keep track of the session id is via a session cookie.
    This cookie gets shared by all windows of the same browser session.
    You are opening these pop-up windows with window.open?
    Print out the session id <%= session.getId() %> on each page to see if it is the same.
    Cheers,
    evnafets

  • Prompt using SQL Results with row-wise session variable comparison

    I have a prompt on Department and I only want the departments to show that have been authorized via a session variable for that user. The session variable can return can return multiple values and is set as row-wise. The session variable is returning results and have been used successfully in an application filter.
    I'm trying to put the correct SQL statement and this syntax doesn't work:
    SELECT "Department"."Department Code" 
    FROM "UBC Financials - YTD Table"
    WHERE  "Department"."Department Code" = '@{DEPT_LIMITS}'
    Can someone give me an example that does work?
    Thanks,

    Try something like WHERE  "Department"."Department Code" = VALUEOF(NQ_SESSION."DEPT_LIMITS")
    or else filter on department and then hit on add then Session variable
    ~ http://cool-bi.com

Maybe you are looking for

  • PLEASE help me to get Leopard to see my HP over the network

    Sigh..... I still cannot get this to work. Does anyone know of any way to get my PB G4 with 10.5.1 to see my HP Photosmart C7280 over my network so it will install properly? Oh, and yes, I would like to be able to use the full feature set that I paid

  • Outlook 2013 - "schedule an automatic send/receive" NOT functioning

    Here is yet another bug in Outlook 2013 which remains at large. Yes, "schedule an automatic send/receive" is not functioning, except in the case of Hotmail/Outlook.com The only time new emails  are getting download are when the Send/Receive button is

  • Oracle 7 Database connection : driver ?

    I used classes12.zip for connection to Oracle 8. But this doesn't work for oracle 7. Error java.sql.SQLException: Io exception: The Network Adapter could not establish the connection at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:114)

  • GPS phototagging with the Song GPS-CS1 on PPC

    I want to add GPS data to my digital photographs. I was thinking of using the Sony GPS-CS1 with HoudahGeo. However, I've read that there seems to be a bug which means PPC machines can't recognise the Sony device, whereas Intel Macs can. Does anyone k

  • Donde descargo version de prueva, o compro imaq vision?????

    señores, necesito las aplicaciones que vienen en la la actualisacion de """imaq vision""" mas especifico las herramientas de machine vision y no las encuentro en ninguna parte de la pagina........ les ruego el fabor de ayudarme...