SessionInfo component - Shows invalid

Hi folks,
Iam new to JDeveloper trying to learn it.
I have a problem here. I was trying to add a sessionInfo component from InfoProducers tab.
I had set the connectionname correctly. Should I set IIOP connection for a JAVA Application. I tried setting both , but still sessionInfo shows the "RED X" mark.
What can go wrong here .
I would appreciate any help
thanks in advance
Padma Kallur.

hi,
the red X on valid sessions is a designer problem. it seems that jdev remembers invalid
session names. the solution: simply try to rename your session's name (eg. sessionInfoEmpDept instead of sessionInfo) because if a valid(!) session gets a red X once you won't get it away without renaming the session.
Additionally, you have to watch the generated code. The designer doesn't remove the publishSession command of renamed sessions. If you rename your session like above you will get the following lines:
sessionInfoEmpDept.publishSession();
sessionInfo.publishSession();
although sessionInfo is not defined anymore (but your compiler will show you this anyhow).
hope i could help
max
null

Similar Messages

APEX component is invalid

Hi,
I create a new database a few weeks back (11.1.0.7 on AIX 6.1). Now i planned to upgrade it to 11.2.0.1 but it is showing me that APEX component is invalid. Can anyone guide me how to make it valid again?
Comp ID Component                          Status    Version
APEX    Oracle Application Express         INVALID   3.0.1.00.12
CATALOG Oracle Database Catalog Views      VALID     11.1.0.7.0
CATJAVA Oracle Database Java Packages      VALID     11.1.0.7.0
CATPROC Oracle Database Packages and Types VALID     11.1.0.7.0
EXF     Oracle Expression Filter           VALID     11.1.0.7.0
JAVAVM JServer JAVA Virtual Machine       VALID     11.1.0.7.0
ORDIM   Oracle Multimedia                  VALID     11.1.0.7.0
OWM     Oracle Workspace Manager           VALID     11.1.0.7.0
RUL     Oracle Rules Manager               VALID     11.1.0.7.0
XDB     Oracle XML Database                VALID     11.1.0.7.0
XML     Oracle XDK                         VALID     11.1.0.7.0

Hi ,
I also faced the same issue.I tried by giving execute priviliges on utl packages to apex_*** schema which did not help me
execute privs on utl packages was granted using ACL in 11GR2.
I am plannin to uninstall this component and reinstall.
If other has any solution ,Please share !!!
Thanks,
AM

Day View in calendar Component showing the next at times not everytime!

Day View in calendar Component showing the next at times not everytime! My question is when we go to Day view which day does it show? is it Server day where the application reside or the machine time zone day ?

I think you want to know, days & time picked by which machine, locally or from server? It does take from server where the application is running.

Switched video settings on my Mac Mini and now the bloody thing shows "Invalid Format" on my TV (used as monitor for years) and I cannot get it to switch back.

Switched video settings on my Mac Mini and now the bloody thing shows "Invalid Format" on my TV (used as monitor for years) and I cannot get it to switch back.
What can I do to get it to work again as more than an overpriced paperweight?

Hello,
Safe Boot from the HD, (holding Shift key down at bootup), see if you can set a good resolution.

Arabic data shows Invalid characters

Hi,
Arabic data is stored in 9i database having US7ASCII character set. Our vendor application is displaying data in arabic correctly but when we try to query data then we are getting characters like
mMml aaEa_JQfdmGJ
Regards
Ahmer

I have tried to display data in ASP, SQLPLUS, SQL Developer & SQL Navigator. All of them are showing invalid except SQL Developer which is showing boxes.
I am only querying the data that is already present in database and vendor's application displaying correctly.
I tried with changed NLS_LANG but it did'nt works.
When I ask the application vendor, they replied me:
"Arabic Data can be viewed in Multibyte telnet clients like Putty, if UTF-8 text encoding is enabled, both in the client and Oracle. The character encoding should be set to UTF-8 only during download of data and then this can be viewed in the telnet client.
Normal single byte telnet clients cannot encode the same, and the arabic data will be shown as Junk characters. Else, the same can be spooled into a text file, opened in MS-Word with the character encoding set as UTF-8 format."
I have to generate report for wondows client.
Regards

Error 1073807302 while connecting a third party USB device,and showing invalid setup

While connecting a third party USB device,In NI MAX it is showing error 1073807302,Unable to start operation because setup is invalid,and error 1073807246 Object Reference is Uninitialized,in the USB settings Tab it is showing no pipe present in Bulk in pipe and in VIEW ATTRIBUTE Tab it is showing invalid property....
please kindly reply me.....!!!

sir,without configuring in NI-MAX how can we open a connection to VISA.
If i install the device driver provided by supplier,i am not able to view my device in NI-MAX,so that, I had created and installed .inf file for my device using VISA driver wizard, In NI-MAX now I can see my device and its properties in visa interactive control.But it was showing some errors(Error-1073676418,error-1073807302,error-1073807298),in the USB settings Tab it is showing, "No pipe present in Bulk In-pipe", and in VIEW ATTRIBUTE Tab it is showing invalid property.In program it is showing error 1073807302,Unable to start operation because setup is invalid,and error 1073807246 Object Reference is Uninitialized,
While Searching in ni.com, some one posted that change the USB Alternate settings to 1/2/3,default value is 0,but now also my problem is not solved.
I am using VIATOR USB HART modem, Model 010031.

Exchange Server 2013 with 3rd party wild Card Certificate shows Invalid

Hi Team,
I've Exchange Server 2013 SP1. Imported a valid 3rd party wild Card Certificate but the status is continuously showing "Invalid" on all my 2013 servers. Any help?
Thank you.
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

Hello,
Can you enable it on the Exchange Services like, IIS, SMTP without any issues?
If the certificate is for OWA, is there any certificate issue when you accessing OWA?
Run the following command to get the Exchange Certificate information and post them for researching:
Get-ExchangeCertificate |FL
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

TS1292 i got an itune card after I hit the pin in it show invalid number, so how to make it work?

I got an itune card after I hit the pin in, it show invalid number so how to make it work?

See Here > iTunes Store: Invalid, inactive, or illegible codes
http://support.apple.com/kb/TS1292

I have got an iPhone MC605J version 6.0 soft bank iphon 4 but unable to use it in India. I am trying to use Airtel sim but the phone is showing invalid sim. So please help me out to unlock it.

I have got an iPhone MC605J version 6.0 soft bank iphon 4 but unable to use it in India. I am trying to use Airtel sim but the phone is showing invalid sim. So please help me out to unlock it.

No one here can help you, & Apple can't/won't help you. Fact is, there is no way to get that iPhone officially unlocked. Only Softbank can authorize the official unlocking of your phone, but they won't. Softbank does not offer official unlocking for any iPhone.
It is what it is.

Phone is showing invalid sim sos only in top left corner, why??

why is my phone showing invalid sim and sos only in top left corner, currently using pre paid! ?????

never mind all fixed..just pulled sim out and backin!!

Please i purchased my iphone from a friend and i updated the ios and now its showing invalid sim

please i purchased my iphone from a friend and i updated the ios and now its showing invalid sim. please i need help because i have to use my phone at the office tomorrow.

ASk your friend who unlock the phone for him/her.
ONly the carrier that the phone is locked to is authorized to unlock it.
bAse on your description, it sounds like your friend had his/her phone hacked to unlock it from the original carrier.

ITune 12.1 update fail by showing invalid signature

I cannot download iTune 12.1 in both download only and download and install options by using Apple Software Update even I have iTune with valid ID in my computer. The download has never finished, showing invalid signature.
Any good reason and help.

Hey mewinkoko,
If you are having an issue with installing an update to iTunes for Windows, I would suggest that you troubleshoot using the steps in this article -
If you can't install or update iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

HT3541 I try to buy a music video from the iTunes Store but it declined my card and it shows invalided card can you please help me

I try to buy a music video from the iTunes Store but it declined my card and it shows invalided card can you please help me

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
edd125 wrote:
...the iTunes Store but it declined my card
Accepted forms of payment > http://support.apple.com/kb/HT5552

HT201328 My unlocked iPhone 4 shows "No Service" and after airplane mode turned on and off, shows "Invalid SIM"

I recently bought two iPhone 4 phones from my colleague in USA. He unlocked these phones from AT&T. But I did not test it. However, now that I am back to India, and inserted my Indian Vodafone SIM car, the phone shows "No Service" and if turn AirPlane mode ON and then OFF, a message comes as "SIM Failure", and the top left corner shows, "Invalid SIM".
Now, how do I confirm whether my colleague was successfully able to unlock these phones ?
What are the steps to make my Indian Vodafone SIM work ?
Any support appreciated.

Hello there Vicky,
Here is a great article for troubleshooting the Cellular connection on your phone. From article iPhone: Troubleshooting a cellular data connection found here http://support.apple.com/kb/ts3780:
Follow the instructions below for assistance with troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
Restart your iPhone.
Ensure that your software is up to date:
Check for a Carrier Settings Update. Tap Settings > General > About.
Check for an iOS Software Update. Tap Settings > General > Software Update.
Note: Some updates may require a Wi-Fi connection.
Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
Try another location. If a different location works, but the original location still does not, contact your carrier to report the issue.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPhone as new.
Contact your carrier to:
Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
Verify that there are no account-related blocks.
Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
In order to verify if the phones have been unlocked, the original carrier for them would have to be called.
Take care,
Sterling

Database upgrade to 10.2.0.4 error - oracle RAC status showing Invalid

Hi all,
I am getting this error during database upgrade to 10.2.0.4 error - "oracle real application clusters status invalid. "
I am getting the above error after running catupgrd
and checking the status SELECT COMP_NAME, VERSION, STATUS FROM SYS.DBA_REGISTRY;
This is not a RAC database and this is the only components which shows INVALID.
Is it normal? Please advice me the action/steps to take to rectify ASAP as it is urgent ... Thanks & Regards, Deepak Gupta

Probably database was 9i and it was upgraded to 10g?
It can be normal situation.
Please check metalink note 312071.1
If database is not rac, then simply ignore this status as workaround is quite difficult and definetely it's not worth to go for it.

SessionInfo component - Shows invalid

Similar Messages

Maybe you are looking for