Sessions management of an iview

Hi all,
I want to close a session of an iview through a code. Please let me know if any API are being used for it.
I am using EP 6 and NWDS 2.0.9.
Regards,
Vaibhav

hi,
plesae refer this link
Http Session:
[http://help.sap.com/saphelp_nw04s/helpdata/en/3b/67efac8476624f954a4d56e62de280/frameset.htm]
IPortalComponentSession:
[http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/3b7f41009d020de10000000a1550b0/frameset.htm]
thanks and regards ,
fazal
Edited by: fazal ahamed on Mar 27, 2008 10:05 AM

Similar Messages

Ep session manager

Hi,
How to disable session manager in ep iviews.How to turn it off.
Path is support desk----sap applications
please let me know how to turn it off.
Thanks,
Manu

Manu,
Have a look at this
Re: "Session management will not work, Please check DSM log file"
Reward points if handy!
Regards,
Sandeep Tudumu

ITS iView and Session Management in Federated Portal Network

Hi,
We use an ITS iView for an HR application in the Portal. When used in federation the session management doesn not work correctly. We fill in a selection screen in the begin of the application and then run the report. When we click the back button in the Portal and then reload the app, the selection of the previous session is used, in stead of showing a new selection screen.
This only occurs when used in Federated Portal Network. SAP OSS already pointed out that the USR_ABORT command is not given in the consumer Portal. How can we make sure that this command is given, so that the session is correctly closed? How can we set these session management properties and options?
Best regards,
Jan Laros

Solved it. It is done in the federation configuration. In SAP Note 880482 - Central Note: Federated Portal Network (SAP NetWeaver 7.0) the problem is identified, specific for SPS13. The two properties of the producer: External Hostname and External Port were not updated properly and needed to be changed manually.

How to permanently turn off the Session Management alert

Hello,
I have a certain iView that is working through https.
Whenever I go to this iView I receive this pop up:
Session Management will not work!
You can turn off this alert inside 'Support Desk' -> 'SAP Application'
I am turning this alert off and I don't see it anymore but after we are doing a server restart it is turned on again and again I need to turn it off.
How can I turn this alert off permanently, even after a server restart?

yes its all a bit strange isnt it ...... the AlertSessionManagementMismatch appears to be runtime in nature - in that if you disable the session management alerting using the support desk approach - this value becomes false. Yet a restart doesnt keep it at false.
What I discovered is - IGNORE what you see when you edit the service - change it physically to FALSE (even if it says false) and save it. This will persist it at the next restart.
Haydn

ITS / IAC session management?

ERP2004 old style 4.7 MSS iviews (ie 60.1.18)
Having problems with IACs (based on essinmss iview).
1st time user navs to the iview fine and all works. 2nd time in they get the 'Start SAP Easy Access' front screen instead of the IAC transaction. If user clicks the 'log out' link on the IAC before navigating away then they can get back in the 2nd time.
So looks like this is an ITS session management issue.
Our Basis guys are telling me that ERP2004 integrated ITS doesn't have a/the rz10 parameter to switch on the session management so that when navigating away from an IAC it shuts the session properly.
Anyon got any experience with this? Hints tips etc...
TIA
J

I have posted this in another post with same issue. Just putting it here for anybody trying to find solution.
Note 918265 - SAP GUI for HTML in EP: /!\ Session not fail-safe /!\
Note 827375 - Integrated ITS 6.40: ~disconnectonclose and IACs
These notes are talking about upgrading ITS to higher support packages:
external ITS 6.20 patch level 22
NetWeaver 2004 Integrated ITS 6.40 Support Package 16
NetWeaver 2004s Integrated ITS 7.00 Support Package 7
and upgrading Netweaver kernal to Patch 68.
Regards,
Parimal

JMStudio Error "Can not create session manager"

Hi,
I'm trying to transmit an mpg file through a simple pc to pc network, using the transmission wizard in the JMStudio, and everytime it causes a "can not create session manager" error, even when I try to transmit .mp3 file
I'm using an ip like 100.100.0.1 for the sender machine, and 100.100.0.2 for the receiver machine, and I don't know where is the problem
thanks in advance

Um,maybe the port that you use for transmission is already occupied.
Make sure that you are not using JMStudio to transmit streams while trying to receive streams from the same port.

What is new with MAX 2.0 and is it compatible with Session Manager?

We added non-IVI instrument information in, basically the same structure as for IVI instruments,
into the ivi.ini file to keep all instrument information in the same place. Using MAX Version 1.1 caused no problems whatsoever and the system worked fine. With the advent of MAX 2.0 you seem to use ivi.ini as well as config.mxs to store instrument information. What we have found now is that given a working ivi.ini file from MAX 1.1, we end up with 2 or 3 copies of all the devices in the IVI Instruments->Devices section! When the duplicate entries are deleted and the application exited, the
ivi.ini file is updated minus the [Hardware->] sections which contain the resource descriptors that our appl
ications look for. As an added complication, under MAX 2.1 (From an evaluation of the Switch Executive) It behaves the same, except that it almost always crashes with one of the following errors. 'OLEChannelWnd Fatal Error', or 'Error#26 window.cpp line 10028 Labview Version 6.0.2' Once opened and closed MAX 2.1 will not open again! (Note we do not have LabVIEW on the system.) What is the relationship between the config.mxs and ivi.ini now? Also, your Session Manager application (for use with TestStand) extracts information from ivi.ini and may expect entries to be manually entered into ivi.ini (e.g. NISessionManager_Reset = True) i.e. Is the TestStand Session Manager compatible with MAX 2.0?

Brian,
The primary difference between MAX 1.1 and 2.x is that there is a new internal architecture. MAX 2.x synchronizes data between the config.mxs and the ivi.ini. The reason you're having trouble is that user-editing of the ivi.ini file is not supported with MAX 2.x.
Some better solutions to accomplish what you want:
1. Do as Mark Ireton suggested in his answer
2. Use the IVI Run-Time Configuration functions. They will allow you to dynamically configure your Logical Names, Virtual Instruments, Instrument Drivers, and Devices. You can then use your own format for storing and retrieving that information, and use the relevant pieces for each execution. You can find information on these functions in the IVI CVI Help file located in Start >> National I
nstruments >> IVI Driver Toolset folder. Go to the chapter on Run-time Initialization Configuration.
I strongly suggest #2, because those functions will continue to be supported in the future, while other mechanisms may not be.
--Bankim
Bankim Tejani
National Instruments

Session management problems with SSO

Hi all-
I've been getting an Apex app tied to SSO as a partner app (per http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html). So far, it sort of works. If I go to my apex app, it redirects me to SSO, where I authenticate and end up back in the apex app. Great. Here are two problems I've run into:
1. If I am already authenticated to SSO, and I go to my apex app (url like: http://host/pls/apex/f?p=101:1), my browser goes into an infinite redirect (url like: http://host/pls/apex/f?p=101:1:::::FSP_AFTER_LOGIN_URL:\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|\\\\\\\\\\\\\\\\\\\). To resolve, I have to clear cookies.
2. If I am using my apex app, then log out of SSO (in another browser window), I can still click around in my apex app (i.e., apex thinks I'm still authenticated).
Anyone have any thoughts? I'm wondering if I need to do something in page session management (under authentication schemes) to fix #2, but I have no clue about #1.
Thanks
Rob

Hi Scott-
Thanks for the info on #2 - I'll work on that after I get #1 sorted out, since it's the more dire problem. Here's some more info:
Apex version = 3.0.1.00.08
SSO SDK = ssosdk902.zip
I set it up as "My Application as Partner App." I used "MY_PARTNER_NAME" as SSO Partner Application Name. In the list of SSO Partner Apps on the SSO Admin page, my partner app name is also MY_PARTNER_NAME. It gives the following info:
Login URL: https://sso_host/pls/orasso/orasso.wwsso_app_admin.ls_login
Single Sign-Off URL: https://sso_host/pls/orasso/orasso.wwsso_app_admin.ls_logout
Home URL: http://apex_host/pls/apex
Success URL: http://apex_host/pls/apex/RBLICK.YOUR_PACKAGE.PROCESS_SUCCESS
Logout URL: http://apex_host/pls/apex
RBLICK is the schema owning the apex app. In there, I created a package called YOUR_PACKAGE:
create package YOUR_PACKAGE as
procedure process_success(urlc in varchar2);
end YOUR_PACKAGE;
CREATE PACKAGE BODY YOUR_PACKAGE AS
procedure process_success(urlc in varchar2) as
begin
wwv_flow_custom_auth_sso.process_success(
urlc=>urlc,
p_partner_app_name=>'MY_PARTNER_NAME');
end process_success;
END YOUR_PACKAGE;
Anything look obviously wrong to you?
Thanks!
Rob

What is the difference between Session timeout and Short Session timeout Under Excel Service Application -- session management?

Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?

Any call made from the API will automatically be set to the “Session Timeout” period, no matter
what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
Short Session Timeout and Session Timeout in Excel Services
Short Session Timeout and Session Timeout in Excel Services - Part 2
Sessions and session time-outs in Excel Services
above links are from old version but still applies to all.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Session management and java Web Service

Hi ,
Can I have two web services one based on Session bean and other on Simple java class, packaged into single ear file? Does NetWeaver supports web service session management/tracking? How can I get an handle to HttpRequest in my Web Service?
Any help will be appreciated.
Thanks in advance
regards,
rajinder

Container Managed Authentication. Does everything you need.

Hello, I have a big problem with Firefox: Session Manager & Undo Closed Tab addons are not working, Sync Is not working. History is working. How to fix this?

Firefox remembers history but doesn't remember closed tabs, sessions.
It happened after updating Fox to v. 19.0.2 on one computer.
In Firefox Options is set Use Custom Settings For History, everything is checked except Always Use Private Browsing Mode. So I am not in private browsing.
When I press on Undo Closed Button nothing happens & in session manager Save Session Button is greyed out. I've tried installing other add-ons that can remember tabs. tried to disable/reinstall these 2 add-ons. Did't help. On my 2nd computer I have same add-ons, same settings and they are working normally. on 3rd computer undo closed tabs works also. How to fix this? I decided to ask before doing Firefox Reset...
Sync is a separate problem. It works, but quite often it logs me out of Sync account. Then I can log in only using long recovery key and password (choosing option I don't have device with me because it does not accept keys for pairing device.)
Thanks for reading.

I have exactly the same settings in Options (in both computers)
for history, these 2 add-ons and all other stuff in Options. The only difference is that on 1 pc sessions can be saved and closed tabs can be reopened, on other main pc they stopped to work. + no any other add-on that does similar things works on this pc.
It is also interesting that I can reopen closed visited sites from History Panel, but not by pressing the Button. For now I only manually bookmark links to a temporary folder.
Recently (some 2 month ago) I pressed x and Firefox closed all tabs without saving them without displaying save & quit pop up.
so I changed 4 settings in about.config
browser.tabs.warn on close true
browser.warn on quit true
browser.warn on restart true
browser.show.quit warning true
but the problem with sessions appeared only 1 week ago.
So I guess the problem is not with the History settings or other settings. Seems that something responsible for button or for storing info about tabs/sessions got corrupted. :(

Session management in Info View with two different logins using single sign

There is a form with 2 user logins UserA and User B to redirect to infoview with sso in my application. I am able to go to each of the Infoview pages successfully but have the following problem.
User A logs in and infoview opens in a new IE window and sees his/her folders based on permissions and is able to do his/her work for the first time.
User B logs in andand infoview opens in a new IE window sees his/her folders based on permissions and is able to do his/her work for the first time.
After a while when User A tries to access the InfoView in the previously opened IE Window, he/she gets an error message. An error has occurred: The object with ID 2519 does not exist in the CMS or you don't have the right to access it.
User B is able to continue his/her work. Who ever logs in the last, he/she is able to continue his/her work but the other one gets an error.
Please let me know on how to address this issue . I added logonToken and tried everything at my hand but no success. Is this session controlled by business objects or by the jsp page. What more changes are required for my jsp page to fix the error. Attached below are the form and the applogon.jsp snippets.
 applogon.jsp
 IEnterpriseSession enterpriseSession = null;
 Exception failure = null;
 boolean loggedIn = true;
 String redirectURL = null;
 // If no session already exists, logon using the specified parameters.
 if (enterpriseSession == null){
 try{
 // Attempt logon. Create an Enterprise session manager object.
 ISessionMgr sm = CrystalEnterprise.getSessionMgr();
 // Log on to BusinessObjects Enterprise
 enterpriseSession = sm.logon(username, password, "cms", "secEnterprise");
 }catch (Exception error){
 loggedIn = false;
 failure = error;
 if (!loggedIn){
 // If the login failed, redirect the user to the start page.
 return;
 }else{
 // Store the IEnterpriseSession object in the session.
 session.setAttribute("EnterpriseSession", enterpriseSession);
 // Create the IInfoStore object.
 IInfoStore iStore = (IInfoStore) enterpriseSession.getService("InfoStore");
 // Store the IInfoStore object in the session using the helper functions.
 session.setAttribute("InfoStore", iStore);
 // Store the CMS name for later use.
 session.setAttribute("CMS", "CMS");
 // Create the IReportSourceFactory object.
 IReportAppFactory reportAppFactory =(IReportAppFactory)enterpriseSession.getService("RASReportService");
 // Store the IReportSourceFactory object in the session using the helper functions.
 session.setAttribute("ReportAppFactory", reportAppFactory);
 // Retrieve the logon token manager.
 ILogonTokenMgr logonTokenMgr = enterpriseSession.getLogonTokenMgr();
 String logonToken = logonTokenMgr.createLogonToken("", 60, 100);
 String infoViewURL = null;
 String tokenParam = null;
 infoViewURL = "/businessobjects/enterprise115/desktoplaunch/InfoView/logon/logon.do";
 tokenParam = "token=" + logonToken;
 redirectURL = infoViewURL + "?" + tokenParam;
 // Retrieve a logon token and store it in the user's cookie
 // file for use later.
 Cookie cookie = new Cookie("LogonToken", logonTokenMgr.createLogonToken("", 60, 100));
 response.addCookie(cookie);
 // Store the logon token for later use.
 session.setAttribute("token", enterpriseSession.getLogonTokenMgr().getDefaultToken());
 // Redirect the user to the relevant tutorial page.
 out.println("You have been logged on to Enterprise.");
 response.sendRedirect (redirectURL);
Thank You for your help

// Retrieve the parameters that the user entered into the logon fields.
 user name and password come from here from the above html form into the jsp here. Ted Is this what you are asking for where does the username and password come from
 String username = request.getParameter("user");
 String password = request.getParameter("pass");

 IEnterpriseSession enterpriseSession = null;
 Exception failure = null;
 boolean loggedIn = true;
 String redirectURL = null;
 ISessionMgr sessionMgr = null;
 // If no session already exists, logon using the specified parameters.
 if (enterpriseSession == null){
 try{
 // Attempt logon. Create an Enterprise session manager object.
 sessionMgr = CrystalEnterprise.getSessionMgr();
 // Log on to BusinessObjects Enterprise
 enterpriseSession = sessionMgr.logon(username, password, "appserver.abc.com", "secEnterprise");
 System.out.println("line61");
 }catch (Exception error){
 loggedIn = false;
 failure = error;
 if (!loggedIn){
 // If the login failed, redirect the user to the start page.
 return;
 }else{ this code is in my first post

Issue in session management

Hi All,
I have a problem regarding java session management.
i have created one web application in which i want if user login from one browser instance and opens another instance of same browser and logs in from that then user should be logged out from previous instance. I am using Mozzila 5.0.
Here is what i am doing while creating session in LoginServlet.java
session = request.getSession(false); //return session if already exists
System.out.println("Session object: "+session);
if(session != null)
System.out.println("Session ID Old: "+session.getId());
session.invalidate(); //invalidate the session if already exists
session = request.getSession(true); //Create new session
System.out.println("Session ID New: "+session.getId());
Second and third System.out.println() statements giving the same session id.
This way only the information stored in session when user was logged in from first instance of browser is replaced with the new information stored when the user logged in from second instance of browser, but the user is not logged out from the first browser instance.
Please help me out how i can log the user out from first instance if he logs in from second instance.
Thanks in advance...

Since user in logging again from the same machine so i think invalidating the previous session won't work.
Suppose user opens first instance of the mozilla browser and login as say 'ashok' whose role is normal user now he opens another instance of mozilla by clicking on executable and login as 'mitch' whose role is admin then after successful login of 'mitch' on first window mitch's menus items are getting displayed instead of ashok's.
What i am doing is,
While creating new session on login i first check is any existing session available in above case its true
session = request.getSession(false); //return session if already exists
System.out.println("Session object: "+session);
if(session != null)
System.out.println("Session ID Old: "+session.getId());
session.invalidate(); //invalidate the session if already exists
session = request.getSession(true); //Create new session
System.out.println("Session ID New: "+session.getId());
so control will go inside the if block, here i first invalidate the existing session (this is not destroying the session but only unbinding the information that was stored in the session) and create new session (this is returning the same session which was already exists) and save mitch's information. Since the previous instance was using the same session that will now get the mitch's information so now both instances will show the mitch's information.
I am not getting any way to destroy the existing session so next time new session id will get generated.

Coherence integration with oracle weblogic portal for Session management

Could you please let me know how to configure coherence integration with oracle weblogic portal for Session management. Its very urgent. please help.

Please take a look at the following web page -
http://coherence.oracle.com/display/COH35UG/Coherence*Web+Session+Management+Module
-Luk

Firefox 5 on Win7: All my plugin buttons have gone from the toolbar. They are not in the customise pane. Session manager offers the correct sessions but opens with last session instead. I've re-installed % and reset toolbars. Help!

Win 7
Firefox 5
Problem with high memory use.
restarted
Plugin buttons gone from toolbar/
Missing plugins still show in plugin manager but buttons missing from toolbar add buttons pane.
Tried reset toolbars - no difference.
Tried re-instal of Firefox 5 - no difference except:
Session manager offers correct session on startup but starts with last session

In case you are using "Clear history when Firefox closes":
*do not clear the Browsing History
*Firefox > Preferences > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/remove-browsing-search-and-download-history
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).

Sessions management of an iview

Similar Messages

Maybe you are looking for