Set a dbms job which will flush the shared pool on box everyday 12.00am on

Hello ,
i want to set dbms job to flush shared pool everyday at 12.00 am on windows box.
so can you please provide me script for that or idea on that.
also i want to know where i have to set that job on sys or system or in user account.
Thanks

Receiving the 404 on box. Since the Oracle 404 error is
ORA-00404: Convert file not found: "string"
Cause: The file used for converting the database from V7 to V8 could not be found.
Action: Verify that the migration process has been started on this database and that the convert filename is accessable.
I'm going to go out on a limb and assume that you're talking about the HTTP 404 (Not Found) error. If that's the case, that would seem to be an issue with your web server/ web application and not with the database. Why do you believe that the database has any involvement with the error you're getting or that flushing the shared pool will resolve the error?
Justin

Similar Messages

  • Iphone 4 has a black screen which will display the apple logo for approx 10 seconds, then goes blank for 10 seconds and so on.  I have tried a hard reset with power button and home button but no change.  Get no response when attempting to connect to itune

    iphone 4 has a black scrren which will display the apple logo and appears to be at start up but then blacks out for approx 10 seconds and then displays apple logo again.  Same action over and over.
    I have attempted hard reset but cannot complete.  Also attempted to connect with itunes and it does not recongize device.
    Device is frozen in this display loop.  Have an appointment with genius bar tomorrow but it's a 2.5 hour round trip so suggestion appreciated.

    Your device may need to be restored as new in iTunes (instead of restored from a back up as it seems that there is a software issue on your phone).
    If your phone is not able to connect in iTunes try forcing recovery mode (http://support.apple.com/kb/HT1808)
    * power off your phone.
    * Hold the home button while connecting your phone to iTunes.  You should see the connect to iTunes window and your computer should give you the recover mode alert.
    *Restore your device as new. Being sure not to restore from a previous back up.
    You will then want to sync your information back to your device from Outlook, iCloud, Google or wherever your information is stored.

  • How to create a user  y which will have the same content of existing user x

    how to create a user y which will have the same content of existing user x ,
    like all the tables,procedures,functions and packages

    You can do the following.
    1. Use CREATE USER to create the new account/schema
    2. Use exp to export old schema
    3 Use imp with fromuser=<old user> and touser=<newuser>

  • Export an XML or EDL which will keep the clip's full name

    Greetings,
    I've been working with R3d (RED EPIC format) footages in premiere cs6 and i need to export an XML or EDL which will keep the clip's full name, in order to use it for further post production (davinci).
    How do i do it?

    i know that edl is an old format but i wonder if there is another format like avid's cmx 640.
    I've already exported xml and it doesn't keep the clip's full name.
    I'm more interested in exporting xml.
    Is there a way to import the R3D so it keeps the clip's full name in the metadata?

  • I need to use the "apple key" which is, I presume the command key, but I do not have an apple keyboard; is there a key on a logitech keyboard which will serve the purpose?

    I need to use the "Apple key" which I presume is the command key; my computer does not have an apple keyboard; is there a key on a logitech keyboard which will serve the same purpose?

    The "Windows flag" key on PC keyaboard in Commans, "Alt" is option.
    Go to Logitech website to see if they have Mac compatibility software (Logictech Control Center) to make mappings a bit more complex).

  • I own CS4, upgraded to CS5, then joined CS6, CC... and now I installed CC14. Which will be the best way to delete or uninstall the programs I don't need keeping only CC14 without running into issues? I have an Alienware Area 51 PC running Windows 7.

    I own CS4, upgraded to CS5, then joined CS6, CC... and now I installed CC14. Which will be the best way to delete or uninstall the programs I don't need keeping only CC14 without running into issues? I have an Alienware Area 51 PC running Windows 7.

    Which will be the best way to delete or uninstall the programs I don't need keeping only CC14 without running into issues?
    There is none. Whatever you do to get rid of the older versions will inevitably do damage to shared components and other stuff of the new versions as well. That's just how it is with this approach... Uninstall the older versions, run the cleaner tool then reinstall CC 2014.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Mylenium

  • Guys ... I have a 2008 MacPro running the current Yosemite.  I also have installed the sound amp called "BOOM!"  I have the Sound set to Line Out which should have the computer boot up to BOOM! Instead, it boots up to the Internal speaker. What's up?

    Hi Folks ...
    I have a 2008 MacPro running the current Yosemite. I have installed the recommended upgraded video card, but the sound is as it was new. I also have installed the sound amp/graphic equalizer called "BOOM!"  I have the Sound set to Line Out which should have the computer boot up automatically to BOOM!  and thus to the external speakers.  Instead, it boots up to the Internal speaker.  According to the folks at "BOOM!", this is happening to others who have similar Macs.  They can't find any explanation within BOOM!, so I am turning to you all.  Any ideas?

    Hi Kappy ...
    Sorry, I guess I didn't state the problem very well.
    I don't want the computer to boot up to the internal speaker.  I want it to boot up to the external speakers.  However, even though System Preferences is set on Line Out, when the computer boots up or reboots, it erroneously goes to internal speaker.  So, every time I boot up, I have been going to System Preference/Sound and clicking on Line Out.  From that point on, everything is OK until the next boot up.  It is a small annoyance, but annoying all the less. The simple explanation seems to be that when the computer is shut down, it does not hold the setting for Line Out and resets itself to Internal Speaker.  How do I change that behavior and get it to go to Line Out whenever it boots up? 

  • I am after a Video Converter which will convert the likes of a avi format to then play on a Humax FOXSAT-HDR PVR, any ideas anyone please?

    I am after a Video Converterfrom the App Store which will convert the likes of a avi format to then play on a Humax FOXSAT-HDR PVR, any ideas anyone please?

    Without knowing the exact details of the AVI files in question, or the formats and codecs supported by the Humax, I can only suggest Handbrake.  Simple and powerful.  Produces excellent results.
    S.

  • How to create sharepoint timer job, which will run at farm level

    Hi ,
    I want to create SharePoint timer job which will access all site collections list from farm and give count of list items of each list and trigger email if count exceeded 4000 items.
    Thanks,
    Ganesh Pawar

    try these links:
    https://social.msdn.microsoft.com/Forums/en-US/75ccf7c0-13b2-4330-aaf2-355f107026a1/rest-services-error-are-a-specific-list?forum=sharepointcustomizationprevious
    https://social.msdn.microsoft.com/Forums/en-US/75ccf7c0-13b2-4330-aaf2-355f107026a1/rest-services-error-are-a-specific-list?forum=sharepointcustomizationprevious
    https://social.msdn.microsoft.com/Forums/en-US/75ccf7c0-13b2-4330-aaf2-355f107026a1/rest-services-error-are-a-specific-list?forum=sharepointcustomizationprevious
    https://social.msdn.microsoft.com/Forums/en-US/75ccf7c0-13b2-4330-aaf2-355f107026a1/rest-services-error-are-a-specific-list?forum=sharepointcustomizationprevious
    Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

  • Which will be the more demanding product for future? Coherence or Weblogic

    Which will be the more demanding product for future?
    Coherence or Weblogic Server?
    If Coherence , Why?
    If Weblogic Server, Why?
    How will be demand for Coherence after 5 or 6 years?

    This isn't a question that I've heard before ;-)
    Today, a very good portion of the WebLogic customers are also buying Coherence with WebLogic, often as part of the product called "WebLogic Suite". Also, many large WebLogic customers have been using Coherence since long before Oracle acquired either BEA WebLogic or Tangosol Coherence.
    When it comes to building high-scale Java EE applications, Oracle Coherence is an invaluable tool, so as long as there are Java and Java EE applications, and as long as high scalability, high availability and high performance are important, there is demand for Coherence, and that demand has grown year after year.
    WebLogic is a much larger and more mature product, with many more customers. WebLogic continues to grow at Oracle, even though it is considered a mature product.
    So I guess you could say there is good demand for both :)
    Peace,
    Cameron Purdy | Oracle Coherence
    http://coherence.oracle.com/

  • I want to buy the photoshop which will change the background on a portrait?

    I want to buy the photoshop which will change the background on a portrait?

    Hi willielois, you can use Photoshop CC or Photoshop Elements to do this. I have shared a video tutorial that can help you learn to do this.

  • In the shared variable properties box, when enabling aliasing, what is the difference between binding to a project variable vs. to a psp url

    In the shared variable properties box, specifically with regard to a the target being an rt target, when enabling aliasing, what is the difference between binding to a project variable vs. to a psp url?

    The difference is in the type of variable you are binding it to.  A project variable is a variable that lives within the specific project in which it was created.  A PSP URL is an address using the Publish-Subscribe Protocol (PSP).  You can learn more about PSP URLs here: http://zone.ni.com/reference/en-XX/help/371361G-01/lvconcepts/using_datasocket_technology/#Specifyin...
    PSP URLs will enable it to communicate between different machines and also between projects which may or may not be open.  The project variable will exist within the project.
    Julian R.
    Applications Engineer
    National Instruments

  • How to pin sequences in the shared pool for RAC?

    We have a RAC environment with two instances. I want to pin some sequences in the shared pool to boost the performance. Do I need to pin them in both of the instances or just pin them in one instance?
    Thanks in advance

    If you cannot tolerate gaps, you must not use sequences. Period. A sequence-generated key will have gaps because transactions roll back, because databases get shut down, etc. If you want to ensure that there are no gaps, you have to write code that serializes access to a resource (i.e. a custom table of sequences) over the full length of a transaction. Of course, this is hugely inefficient and kills the application's scalability, but it does prevent gaps. Sequences are much faster and much more scalable, but they do not and can not guarantee that there are no gaps.
    Assuming the intention is to minimize gaps, rather than to eliminate them, NOCACHE & ORDER can help. That means, though, that you may need to communicate with the other nodes in the cluster every time you need a new value from the sequence, which is the slow part. Pinning the sequence is not going to be beneficial.
    Justin

  • Contention for latches related to the shared pool was consuming significant

    We are having performance issue on our database. When I look at the AWR, I see that there is a contention for latches. Below is the AWR Report.
    ADDM Report for Task 'ADDM:1775307360_12808'
    Analysis Period
    AWR snapshot range from 12807 to 12808.
    Time period starts at 10-MAY-11 01.00.15 PM
    Time period ends at 10-MAY-11 02.00.23 PM
    Analysis Target
    Database 'ADVFDWP' with DB ID 1775307360.
    Database version 11.1.0.7.0.
    ADDM performed an analysis of all instances.
    Activity During the Analysis Period
    Total database time was 27827 seconds.
    The average number of active sessions was 7.71.
    Summary of Findings
    Description Active Sessions Recommendations
    Percent of Activity
    1 Shared Pool Latches 6.43 | 83.42 0
    2 Top SQL by DB Time 2.41 | 31.24 3
    3 "Concurrency" Wait Class 2.18 | 28.22 0
    4 PL/SQL Execution 1.53 | 19.86 1
    5 "User I/O" wait Class 1.33 | 17.24 0
    6 Hard Parse 1.24 | 16.14 0
    7 Undersized Buffer Cache .83 | 10.73 0
    8 CPU Usage .7 | 9.02 0
    9 Top SQL By I/O .31 | 4.04 1
    10 Top Segments by I/O .24 | 3.12 1
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Findings and Recommendations
    Finding 1: Shared Pool Latches
    Impact is 6.43 active sessions, 83.42% of total activity.
    Contention for latches related to the shared pool was consuming significant
    database time in some instances.
    Instances that were significantly affected by this finding:
    Number Name Percent Impact ADDM Task Name
    1 ADVFDWP1 99.31 ADDM:1775307360_1_12808
    Check the ADDM analysis of affected instances for recommendations.
    Finding 2: Top SQL by DB Time
    Impact is 2.41 active sessions, 31.24% of total activity.
    SQL statements consuming significant database time were found.
    Recommendation 1: SQL Tuning
    Estimated benefit is 1.07 active sessions, 13.82% of total activity.
    Action
    Run SQL Tuning Advisor on the SQL statement with SQL_ID "fdk73nhpt93a5".
    Related Object
    SQL statement with SQL_ID fdk73nhpt93a5.
    INSERT INTO SFCDM.F_LOAN_PTFL_MOL_SNPSHT SELECT * FROM
    F_LOAN_PTFL_MOL_SNPSHT_STG
    Recommendation 2: SQL Tuning
    Estimated benefit is 1 active sessions, 12.96% of total activity.
    Action
    Tune the PL/SQL block with SQL_ID "7nvgzsgy9ydn9". Refer to the "Tuning
    PL/SQL Applications" chapter of Oracle's "PL/SQL User's Guide and
    Reference".
    Related Object
    SQL statement with SQL_ID 7nvgzsgy9ydn9.
    begin
    insert into SFCDM.F_LOAN_PTFL_MOL_SNPSHT select * from
    F_LOAN_PTFL_MOL_SNPSHT_STG;
    end;
    Recommendation 3: SQL Tuning
    Estimated benefit is .4 active sessions, 5.2% of total activity.
    Action
    Investigate the SQL statement with SQL_ID "fcvfq2gzmxu0t" for possible
    performance improvements.
    Related Object
    SQL statement with SQL_ID fcvfq2gzmxu0t.
    select
    a11.DT_YR_MO DT_YR_MO,
    a11.IND_SCRTZD IND_SCRTZD,
    a13.CD_LNSTAT CD_LNSTAT_INTGRTD,
    sum(a11.CNT_LOAN) WJXBFS1,
    sum(a11.AMT_PART_EOP_UPB) WJXBFS2,
    sum(a11.AMT_LST_VLD_PART_UPB) WJXBFS3
    from
    SFCDM.F_LOAN_PTFL_MOL_SNPSHT
    a11
    join
    SFCDM.D_DETD_LNSTAT_CURR
    a12
    on
    (a11.ID_CYCL_CLOS_DETD_LNSTAT_SRGT = a12.ID_DETD_LNSTAT_SRGT)
    join
    SFCDM.D_LNSTAT_CD
    a13
    on
    (a12.ID_LNSTAT_CD_SRGT = a13.ID_LNSTAT_CD_SRGT)
    join
    SFCDM.D_LOAN_CHARTC_CURR_MINI
    a14
    on
    (a11.ID_LOAN_CHARTC_SRGT = a14.ID_LOAN_CHARTC_SRGT)
    where
    (a11.DT_YR_MO in (201103)
    and a14.CD_SFCRM_LOAN_BUS_LI not in ('L', 'T', 'W')
    and a13.CD_LNSTAT in (14)
    and not exists
    (select * from SFCDM.F_LOAN_PTFL_MOL_SNPSHT s
    where s.id_loan_syst_gend = a11.id_loan_syst_gend
    and s.dt_yr_mo

    It is worth checking the actual size of the shared pool e.g.
    select pool,sum(bytes)/1024/1024/1024 from v$sgastat group by pool;
    the parameters you ahve posted suggest you have set a minimum but no maximum, so it could very large.
    Next up is looking for unhared SQL i.e.
    select column1 from some_table where column2='A_VALUE';
    select column1 from some_table where column2='Another_Value';
    where the code should be using binds instead of literals for security and performance reasons, a simple way to find this is to look in v$sql for sql having the same plan_hash_value but different sql_Ids and compare the sql_fulltext of each statement.
    Also a possibility is sql with many child cursors, this is trickier as the cause may vary and may not be easy to fix. check th econtents of v$sql for sql that have high values in the child_number column anmd investigate the contents of v$sql_shared_cursor for the reason there are multiple child cursors.
    Chris

  • Keeps an object in the shared pool

    hello all
    please tell me, when should we keep an object in the shared pool?how can we find out which should be kept in shared pool? please tell me in detail..........
    thank you all in advance

    mohammed_dba wrote:
    hi dear,
    please tell me how can find out which package is frequently pins? please give query for thatI guess you mean which packages are frequently accessed and are candidate for the pinning in the keep pool.
    Use the following query:
    SELECT substr(owner,1,10)||'.'||substr(name,1,35) "Object Name",
    ' Type: '||substr(type,1,12)||
    ' size: '||sharable_mem ||
    ' execs: '||executions||
    ' loads: '||loads||
    ' Kept: '||kept
    FROM v$db_object_cache
    WHERE type in ('TRIGGER','PROCEDURE','PACKAGE BODY','PACKAGE')
    AND executions > 0
    ORDER BY executions desc,
    loads desc,
    sharable_mem desc;Then check which objects have high value for the EXECS column. Also consult with your application developers to identify the frequently used code.
    regards

Maybe you are looking for

  • Windows Vista and Oracle XE

    I bought a laptop with an excitement; and installed oracle 10g XE, now I can't run the oracle on this Windows Vista? Any guidance and suggestion would be much appreciated. I couldn't dare to install linux fedora on this laptop which has Windows Vista

  • Create and Approve absence using BAPI's

    Hello Experts, I got to know that BAPI_EMPLOYEE_ENQUEE, BAPI_ABSENCE_CREATE & BAPI_ABSENCE_APPROVE. has to called in a sequence (test sequence) for creating and approving absence. But when I test them I am getting the following error: "Attendance/abs

  • How to put objects in a transport?

    Hi Expert, Initially, i put all the objects that i have created in a non-transportable package which is $tmp in developement server. Then, now, i would like to use all these objects in quality server. Thus, how to put these objects eg. the queries, p

  • Want to set Reader option in Internet Preferences for all users that login to the workstation

    How can I do this? Is there a config file to edit or a policy object to maintain the perferences settings for all users.  Right now this has to be set manually for each users that would use the system.  Thank you!

  • Strange number conversion when using preparedStatement.setLong

    Hello all, I've been working with some code for a while now, and for the most part has been working just fine. As a unique identifier for by objects, I've been using an integer value (int), but have reached the point where I'd like to use a long valu