Set a default release indicator while creatign PO in me21n

Dear all,
I want to update ekko-frkge = 'B' while creating the po in me21n.
i tried BADI ME_PROCESS_PO_CUST but the filed is not modified.
whether it is possible to set a default release indicator to a po?
If possible tell me where to make the code...

For that you have configure release strategy in SPRO and set the PO for release.
Nabheet

Similar Messages

Set by default procurement indicator to PFV

Dear Gurus,
I want to set by default procurement indicator to PReq + Reser for WBS element.
So when I will enter any material then system will create PR with Q and reservation number.
Please guide
Keshav Pawar

Please create a procurement indicator in OPS8 and use the settings as shown below..
Priorities
Priority Plant = 2
Priority Project = 1
Priority Sales ord = 3
Control data
PReq network = Checked
Default Item Category
Item Cat MRP = L
Maintain it in OPUU.

Defaulting tax indicator I1 on Purchase order ME21n

Where is the configuration for defaulting tax indicator I1 on PO creation transaction screen?
Need help- thanks
Raj

HI,
You can default tax code in Invoice doucment not in PO. You can get the tac code from the vendor material combination document which is urchasing info record into the PO.
Or maintain in the PO / RFQ / Quotation and reference these documents to make a PO so that the tax code flows in.
Thanks & Regards,
Kiran

Can we Set the Default SAP Component while Creating Support Message

Hi Friends,
I Have got requirement like, when we create the support desk message from any application system by default the sap component should get selected which we have determined in Solman.Our Business secnario is too complex user give create the support message without giving the Sap Component or they give wrong sap Component, so we want to set the sap component get selected by default while creating the support desk message, guide me in solving this issue.
Regards
Charan

I think your logic is reversed. I think it's better to let users create messages from the application areas from which they are having the problem. Based on the standard SAP component which defaults into the component field, the ticket can be routed to one of your 20 teams. This is where the agent detemination rule for support team can be configured. There are a number of message on the forum regarding support team configuration. This way, if your 20 teams can't solve the problem (for example SAP defect) then the message can be forwarded directly to SAP using the correct component. Good luck.

How can I set a DEFAULT zoom size at ctrl+++ that will hold while changing sites--even in private browsing?

How can I set a DEFAULT zoom size at ctrl+++ that will hold while changing sites--even in Private Browsing?
I'm just starting using Firefox but I won't be using it for long if I have to re-size the screen with every new location viewed.

Try this add-on
[https://addons.mozilla.org/en-US/firefox/addon/6965/ Default FullZoom Level ]

Is it possible to set a default music player for the music on my external hard drive while still keeping my iTunes the default player on my Mac ?

Is it possible to set a default music player for the music on my external while still keeping my iTunes the default player on my Mac ?
Message was edited by: Pellseidon

There is no setting in the iPhone to set another default music player. The default is Music. If you are using another application, you are at the mercy of how that application operates as far as what occurs when it stops or errors out. The car is looking for music to play.

How to set default file path while downloading alv output

Hi,
Can anyone tell me that how to set default file path while downloading the ALV output to system using Local file button on tool bar.
Please look below screenshots:
Kindly help me resolve it.
Thanks in advance.
Regards,
Ashutosh Katara

This information initial value is (maybe) stored in Windows Register (register.exe) at Software\SAP\SAPGUI Front\SAP Frontend Server\Filetransfer -> PathDownload, you can read it thru class CL_GUI_FRONTEND_SERVICES method GET_UPLOAD_DOWNLOAD_PATH and update it thru method REGISTRY_SET_VALUE. (Else there may be some parameter ID to force data, but I'm no longer sure)
Regards,
Raymond

How do I set the default welcome page for PUBLIC user

gurus,
i'm using -
Oracle 9i Database
Oracle 9ias Portal Release 2
QUESTION => how do I set the default welcome page for the PUBLIC user.
i did the following to achieve this -
1. logged into portal
2. clicked on builder
3. clicked on administer tab
4. selected PUBLIC user in the Portal User Profile portlet
5. went to the preferences tab
6. in the default home page selected a custom page group
7. logged out of portal
8. open a new browsere session
9. type the portal URL and i get the login page ....??
i'm unable to understand this behavior ... shouldn't i be getting the page group that i set for the PUBLIC user in step 6 above ....
the second QUESTION is => when the user logs out he/she should see the PUBLIC page set in step 6 above ... but, instead the user sees a page that is as follows -
Partner Application Name Logout Status [Logout Status]
Oracle Portal (portal) logout status
The SSO Server (orasso) checkmark
buzz.resva.trw.com:7778 checkmark
infrastructure.happy.resva.trw.com checkmark
portal1.buzz.resva.trw.com checkmark
portal2.sylvester.resva.trw.com checkmark
sylvester.resva.trw.com:7778 checkmark
so, how can i set the default page for the PUBLIC user and also a page when he user logs out.
ideas anyone ....?
thanx a bunch.
hero

Hi,
The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
Hope it clarifies the things.
Regards,
Ved

Release Indicator for Purchase Order

Dear All,
While we set release indicator for release of ourchase order, we select changeble ststus of Purchase Order during release.
As per standard if we set 1 - Not changable and after creation of Purchase Order release indicator set as "Blocked" which is having changable status as "1-Not Changable", then also system allow to change Purchase Order.
Can anybodu suggest solution.

Hi,
I think You are mistaken by terms itself.
well, whn u refer to CHANGEBILITY Indicator , it is only concerned to RELEASE STRATEGY ( applicable to that PO ) which may or may NOT change automatically based on characteristic value changes in PO.
But this changebility indicator doesn't refer to PO Change control.
Pl don't get confused regarding control excercised by this changebility indicator.

How do I set the default Hero image in a Muse slideshow widget when using Free Form Thumbnails?

Hello,
I am trying to find out how to set the default Hero image when using a Muse slideshow widget and in the Layout section I have the "Free Form Thumbnails"
box checked.
In other words, when the page loads I want to define which image displays as the first Hero image.
If I do not select the "Free Form Thumbnails" option, the top left Thumbnail image always displays first. This is fine.
But when I select the Free Form Thumbnails" checkbox I don't know how to define which image shows first as the Hero image.
I have a short video at this link where I illustrate the question:
http://amson.org/misc/default-hero-image-1.mp4
I have added a WMV video file at the link below:
http://amson.org/misc/default-hero-image-1.wmv
Okay… I think I've worked out how to do it!
[1] First have the "Free Form Thumbnails" box UNCHECKED.
[2] Organize the Thumbnails and place the image that you want to be the first Hero image when the page loads in the top left corner of the Thumbnails group.
[3] When you "Preview Site In Browser" the Thumbnail image in the top left corner will always display as the first Hero image.
[4] If you want "Free Form Thumbnails" go ahead now and SELECT that checkbox.
[5] Whichever image was in the top left of the Thumbnail group before you checked "Free Form Thumbnails" will still show up as the first Hero image when the page loads, regardless of where that thumbnail image is located within the Thumbnail images group.
Thanks very much.
Chris.

Hi,
The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
Hope it clarifies the things.
Regards,
Ved

Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
Thank you!

shooternz wrote:
Here is the solution: Slow down. Give your project some love. Smell the roses.
Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
shooternz wrote:
Then it would not be a default...it would be an option and you already have that option.
Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

How to set a default value in a form, for a current record.

Hello,
I have created a form to store the details of an employee, details include employee id, name and lan id. I am wondering if it's possible to set the default value for an e-mail address. The e-mail address would be in the format '[email protected]'. So If I press 'create', I am directed to a form.
In the forename field, if i type 'stewart'
In the surname field, if I type 'Young'
Then in the e-mail field, I should see '[email protected]'
Furthermore, if I change 'stewart' to 'stuart', while still in the form, the e-mail address field is automatically updated to '[email protected]'
Would anyone be able to help with this problem?

Hi,
to do this you need kind of interactivity in your form.
You can achieve this either by:
1) using JavaScript onchange-events on forename and surname items, or
2) use the AJAX Computations option of ApexLib, see: http://www.oracle-and-apex.com/ajax-computations-rich-client-feeling/
brgds,
Peter
Blog: http://www.oracle-and-apex.com

How to set a default value to a field in *_BrowEdit.jsp?

I know that we can use:
<jbo:AttributeIterate id="def" datasource="<%=dsName%>">
<jbo:RenderValue datasource="<%=dsName%>"/> 
</jbo:AttributeIterate>
to accept value .
And now ,I want to set a default value to a filed.
How to do?

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

Adobe Reader will not set as default application for .pdf in windows 8.1 pro x64

When I install adobe reader the icon/app changes from windows reader to Pick an app, I choose change and select adobe reader, the icons on my desktop flicker but nothing actually changes.Control Panel\All Control Panel Items\Default Programs\Set Default Programs\Set Program Associations, Select adobe reader, Choose defaults for this program, PDF is unticked so I tick it and choose save, go back in and it is unticked again??? Right click on a pdf file, choose open with, choose default program, use this app for all .pdf files is ticked, select adobe...Still nothing changes, stays on pick an app. I uninstall adobe reader then the pdf icon changes to and default opens with windows reader again. Reinstall adobe reader and back to the same thing. ???? I am a power user, build configure computers and subsequent software, started with DOS 6.0, learned unix/linux/networking concepts/networking security/server versions of windows/active directory. The only solution I could think of was to hack the registry which I looked for but could not find. I am running 8.1 pro x64, I just discovered that windows reader (which I cant uninstall) has the same problem when adobe reader is installed. Windows will not allow either one to be set as default while they co-exist.

After an extended session with chat only to be told that since Adobe Reader was free they could not help me :-(... I figured it out myself.
I opened a administrator: command prompt window and typed "regedit" Through extensive searching and stumbled on this key located at... HKEY_USERS\S-1-5-21-2274202122-2588692262-2244265822-1001_Classes\.pdf\OpenWithProgids The S-1-5-21...1001... is my current logged on user, your value may differ slightly. Typically the builtin disabled administrator account is 1000 and when you install windows and create a user account "John Doe" it will have administrator priveleges and be auto numbered 1001, every user account created therafter will increase by 1 ie...1002, 1003, 1004 etc. even if you remove (delete) an account and re-create it you wont get the same number, the system will use the next number in sequence. The old one will have been trashed never to be used again. Again here is the key...
HKEY_USERS\S-1-5-21-2274202122-2588692262-2244265822-1001_Classes\.pdf\OpenWithProgids I deleted this key under (default) on the right side...
Name                                                                       Type                                           Data
(Default)                                                                   REG_SZ                                    (value not set)
AppX86746z2101ayy2ygv3g96e4eqdf8r99j            REG_NONE                              (zero-length binary value) ---- This is the key to delete!!!
Personally I selected computer on the left side and the went to file/export then chose a file name [01 29 2014 regbackup.reg] and location. Then I selected "OpenWithProgids" and did the same thing,[pdf.reg] this saves a backup of the entire regestry and the key you are about to delete as a safety net. When you are done all you have to do is go to a pdf file, right click and choose open with...Adobe Reader - the box always use this app should already be checked.
I did this and it works yet because improper regestry modification can crash your system I am compelled to warn... Use at your own risk. If you are uncomfortable modifying your registry I would suggest consulting with someone qualified and has resources to do offline registry modifications/restorations which makes it VERY important to do the computer export registry backup.

Set a default release indicator while creatign PO in me21n

Similar Messages

Maybe you are looking for