Set a external link into message maintanance in longtext or ..

in long text message maintanence i want to set an external link.
somebody knows how its possible?
and when not, can i fill the long text message from an external ressource?
thanks
ezachiael

Solution found: another dev had added a RESET_STATE process on the login page and I guess that was blanking out all the parameters that were in the URL; I removed that and tested things and they are back to normal now.

Similar Messages

Create a direct external link into SAP Portal

Hello, I am looking to create an external URL to directly link into a specific page inside my Netweaver Portal. Is there a way to set up this navigation?

Hi Chris,
The link would be something like this:
http://<server>:<port>/irj/portal?NavigationTarget=<pcd address of page>
The above creates the entire framework page around the page. You can get just the page by doing something like this:
http://<server>:<port>/irj/servlet/prt/portal/prtroot/<pcd address of page>.
Hope this helps.
Daniel

Help loading external links into AS2 code.

I am on an imac. Running Mac OS 10.4.11. I'm using Flash Ver.
9.0.
I've created an animated slideshow, that I'm trying to make
externally updateable. I have linked all of my pictures to exteral
locations, successfully, as well as all of my text. The only
problem, I'm not sure how to understand, is making the links
updateable.
Is there anyway to insert into my code, a string similar to
that which links dynamic text to an external .txt file? I want to
be able to have one of our interns to be able to just drop a link
on a .txt file and upload that to a server location, that my file
will draw from.
Thank you in advance.

sry for the double post

Customizing SE91 Long Text - External Link

Somebody knows how to customize an external link in messages long text?
i had a look in "creating additional infomation?
but don't understand that form... i think there it is possible via command or link. but i can't find out the syntax..

try this:
Tip n°6: how to add hyperlink inside message long text

Why do I get an Error Message when trying to "External link" an SWC?

hi.
when I use the "external link" option in the SCW linckage
dialog box, the running SWF produces an alert box saying :
"VerifyError: Error #1014: Class mx.core::Application could
not be found.
at flash.display::MovieClip/gotoAndStop()
at
mx.managers::SystemManager/::preloader_initProgressHandler()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.preloaders::Preloader/::timerHandler()
at flash.utils::Timer/flash.utils:Timer::_timerDispatch()
at flash.utils::Timer/flash.utils:Timer::tick()
I did what the documentation said, still I get that error...
..quoting the "Using flex builder 2" doc:
"To set the SWC file as an external library file:
With a project selected in the Navigator view, select Project
> Properties > Flex Build Path.
Select the Library tab, and then select and expand the SWC
file entry to display the SWC options.
Double-click the Link Type option. The Library Path Items
Options dialog box appears.
Select the External option, and click OK. "
Anty suggestions?
thanks,
Guy.

error message,
Is the path/shape closed?
Selecting it and Ctrl/Cmd+J should close it if not, then you may try again.
You may also have a look in the Document Infor palette with Objects ticked in the flyout and the path selected.

Message appears when displaying project with external link

Dear Sir,
I am very fimiliar with Robohelp 6 options. As I upgraded
from version 6 to 7 , some of the things were different. I have a
huge webhelp project that is composed of many sub-projects, in most
of them there are hyperlinks to each other.
the problem is that whenever I open a project that refers to
an external topic, a message appears saying : (The Hyperlink ....
used in .... is outside the current project and will not be shown
in project manager)

It is a standard message and if you are satisfied the links
are good, then there is an option to turn the warning off.
I suspect you turned it off in RH6 and the installation of
RH7 has just brought it back.

I'm using LR5.7 on a Mac Mini running Mavericks and when I attempt to import a folder of new RAW photos from my external drive into my catalog instead of seeing a preview of each thumbnail photo I see the following message displayed: "Preview Unavailable

I'm using LR5.7 on a Mac Mini running Mavericks and when I attempt to import a folder of new RAW photos from my external drive into my catalog instead of seeing a preview of each thumbnail photo I see the following message displayed: "Preview Unavailable for this file." If I highlight any other folder of photos the previews are all there. What is the likely reason for these previews being unavailable? JohnnyCam

What camera took these RAW photos?
Did you use any Nikon software to transfer the photos to your computer's hard disk?

External URL Link Into HTMLDB Application

Hi,
I have a non htmldb application that I want to link into my htmldb application via a url so I can run a report, in order to run this report I need to feed in some variables
This link i am using is
http://dev.oraclecorp.com/pls/aitmarvel/f?p=100:8:::::P8_REFRESH_HEADER_ID,P8_SR_NUMBER,P8_TARGET:82,3526357,ADMAT
The variables being
P8_REFRESH_HEADER_ID,P8_SR_NUMBER,P8_TARGET
in this case I want populated with
82,3526357,ADMAT
It goes through single sign on OK and then displays the correct page but the variables have been stripped off.
Any ideas??
Thanks ANDY

Hi,
are there any ideas out there to this question?
I am having exactly the same problem.
What I additionally noticed is that when you hit the link
for a second time, the parameters are passed fine.
It seems to work only when a htmldb session already exists for the application.
I am using "HTML DB as Partner Application".
I have a feeling this problem is more related to the
Single Sign On server...
Thx, Michael

Broken iMac display - nothing visible - How to set up external display?

I have a 17" Core Duo 1.83 with a cracked screen. It boots but I can't see anything thru the cracks. I can access the system in Firewire Target Disk mode, which I used to wipe the HD and reinstall Leopard.
Is there any way to boot the iMac in Display Mirroring mode, so that I can set it up to use an external display? I have a 22" Dell connected via DVI and would like to use that.
I guess the ideal would be a keyboard shortcut to use at startup. I've seen on other boards that there is such a shortcut for the Macbook: Command + F4. But it doesn't work with the iMac.
I also have the Remote Control if that could be any help.
Would voice commands be an option? If so, how would I activate and use them, given that I can't see anything on the screen? I don't remember ever activating them, so I don't know if they'd be on at the moment.
My idea is to turn the iMac around with the broken screen facing the wall, then use it with the Dell monitor. Still lots of life left in the iMac with 2GB RAM, works very well with Leopard, still quite fast.
Any help would be GREATLY appreciated. Thanks.

Okay, looking good for now!
I found a thread on Mac Forums. Link: http://www.mac-forums.com/forums/apple-desktops/184101-help-broken-imac-external -screen.html
Guy explains how he solved problem of iMac with broken screen, connected to external monitor; you need a second Mac to do this.
I quote:
-- What u need to do is drag the menu bar from the iMac with broken screen in Sys Prefs/Displays to the Ext Display - which of course is not possible. So if you were to connect the damaged iMac by firewire to another Mac with an External display - start the damaged iMac in Target mode by holding T key after powering on. Then start the Mac with Ext Display and hold Option Key and select the damaged Mac to boot off - once that is going go into Sys Prefs/Displays and drag the menu Bar onto the External Display to make it the Primary one. Then shut it all down and connect the Ext Display to the damaged iMac and with luck you will be GO. --
I cloned my Macbook 10.5.8 system to the iMac HD and made it bootable. Seemed to be working fine. I then shut down both Macs. I connected an external display to Macbook. The Macbook and iMac were still connected via Firewire. I booted the iMac and pressed T, so it booted in TDM. After about 30 seconds I booted the Macbook and pressed Alt: the Macbook's and iMac's disks were available as boot disks. I chose the iMac's disk and waited.... Seemed a long time. But finally the external monitor came to life and I had the whole thing working, more or less.
The setup was in Extended Desktop mode, with the extended desktop on my external monitor. Luckily, a bit of the top of the iMac's screen was semi-visible, and I was able to open Display Prefs. I selected Mirrored Displays at first and then was able to work on the external display (and not thru the cracks). From here, I unchecked Mirroring and selected the external display as the main one. This worked just fine. I have a 23" full HD monitor and it looked great.
I then shut down both computers, disconnected Firewire, disconnected the monitor from the Macbook and connected it to the iMac. Then I rebooted the iMac. It booted up a lot quicker, but on startup it went back to Extended Desktop, with the iMac's display as the Main one. Again, I was able to open Monitor prefs, then clicked on Gather Windows, which put the pref window on the external monitor desktop too. Again, from there, I could make the external monitor the Main one.
Question: is there any way to make the iMac boot to where the external monitor is the Main desktop all the time and by default?
If not, maybe the worst case scenario is that I have to set display prefs to Mirrored before shutting down. Then after startup I could just make the external one the main display again.
Many thanks David.
P.S. forgot to say that when I set the external monitor as the Main one in display prefs, it all worked okay, except that when I opened System Preferences, the window opened on the iMac's screen, not the external one.
Is there a setting to make all windows, in all apps, open on the Main display?
Message was edited by: moonshot61

Is it possible to buy an external casing into which a backplane ready hard

Is it possible to buy an external casing into which a backplane ready hard drive will slot?
After I set up a RAID 0 array, I will have a spare 640GB hard drive ( the original Apple one), and I was wondering whether it is possible to purchase an empty external casing which would house it.
Just a thought!
Or am I living in dreamland?

Many thanks for the advice.
Unfortunately, the range of ancillary products available to Mac users in the UK is very limited compared to the States.
I was unable to track down any UK resellers of FirmTek enclosures, and I am reluctant to import from abroad, because it would be too much hassle to return products in the event of a fault.
After a lot of googling I thought I had found the ideal solution when I came across a Macally Voyager Q Dock review in a back issue of MacWorld UK. However, although some Macally products are sold by UK resellers, I could only find the Voyager Q available from OWC.
I came across lots of external hard drive cases, enclosures and docks, but invariably they were USB2.0 and/or eSATA, with a few also having FW400 ports.
Eventually I tracked down one case and one dock, stocked by Storage Depot Co. UK, which had FW400, FW800, eSATA, and USB2.0 connectivity. I decided that the single bay case was the best option for me, and I have placed an order for one.
If any UK Mac users are looking for either a single bay case, or dock, for SATA drives, with FW800 connectivity, these are the respective links for the case and the dock:
http://www.storagedepot.co.uk/Hard-Drive-Cases/sc884/p1332.aspx
http://www.storagedepot.co.uk/External-Hard-Drives/Hard-Drive-Cradles/sc883/p877 .aspx

External link to location in PDF not working

I can't get an external link to open to a specific place in a PDF. I have tried the code for named destination and a page number and nothing is working. I actually found some good documentation on line that should me all the parameters that could be passed, unfortunately, they aren't working.
Here are the ways I have test linking into the PDF:
http://at3etfsn1.atlanta.ibm.com/crm/sheol/Marketing/MAT_DPP_ExercisesA.pdf#nameddest=LogO ut
http://at3etfsn1.atlanta.ibm.com/crm/sheol/Marketing/MAT_DPP_ExercisesA.pdf#LogOut
http://at3etfsn1.atlanta.ibm.com/crm/sheol/Marketing/MAT_DPP_ExercisesA.pdf#page=22
http://at3etfsn1.atlanta.ibm.com/crm/sheol/Marketing/MAT_DPP_ExercisesA.pdf#22
The link is stored on a wiki... but I didn't think that would make a difference. The PDF was created using Acrobat 9.0 from a Word document. I have made sure that the document does not have any security. Please let me know if you have any suggestions that might help me get this to work.
I know this is shocking, but I did actually read the documentation. LogOut is a bookmark I made with no spaces in the name. I'm not sure what else to try. If you have some examples or suggestions please let me know.
Thanks for your help.
Take care.

The link was copied from a post I'd made to AUC from back in 2008; so, yes it can/does work.
I've used PDF Open parameters with MSIE 5, 6, 7, & 8.
During use of any particular MSIE release I always keep it updated as MS rolls out the updates.
Used Adobe Reader 5, 6, 7, 8, & 9 - each updated as Adobe rolled out the updates.
Used Acrobat 5 (Full), Pro 6, 7, 8, 8 3D, 9 (Pro Extd).
Again, as updates are rolled out they are applied.
Just checked again with:
MSIE 6 (fully updated) & Adobe Reader 9.3.2
MSIE 8 (fully updated) & Acrobat 3D (8.2.2)
MSIE 8 (fully updated) & Acrobat 9 Pro Extd (9.3.2)
For all, the open parameter performed as expected.
Source PDF's Initial View is page only.
Rendered in browser showing bookmarks and opened to the specified page.
As to MSIE add-ons; this varies with the MSIE release.
IE 6 shows less than IE 8.
Various threads at Acrobat User Community may be informative.
For keyword search: "open parameters"
For Author search: "daka630"
At AUC Forum Search:
http://www.acrobatusers.com/forums/aucbb/search.php
5th post to this thread has the link I used above as well as some others -
http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=15061
n.b., tried the links you provided - nothing appears in the browser - same if I delete # and all subsequent characters after the file extension.
As to "installs" - basically, I run with the out-of-the-box installs; nothing "custom".
One thing that is common to the Adobe Reader/MSIE 6 & the various Acrobat/MSIE8 checks I just did is that for "Documents" in the Preferences the 'Open Setting' of "Restore last view settings when reopening documents" is not ticked.
-- just an end note here, open parameters have been around since at least Acrobat 4.x
Be well...

How to connect external database into BI source system?

<Moderator Message: Please search before posting. This issue has already been discussed a lot of times. Additionally you might have a look at the online help>
Dear SDN,
I am working on BI 7.0 system.
Client request is to connect the external database into source system.
External database (different server) has installed the Sybase database.
1.Is it possible ?
2.What is the procedure for connectivity from BI end .
3. which server port of external database(sybase databse) need tobe open for firewall policy.
Thanks in advance
Ravi
Edited by: Siegfried Szameitat on Mar 9, 2009 1:23 PM

Hi Ravindra,
Check here........
<link farm removed by moderator>
Thanks,
Vijay.
Edited by: vijay m on Mar 9, 2009 5:43 PM
Edited by: Siegfried Szameitat on Mar 9, 2009 1:23 PM

I get a "locate link browser" message after updating Avast

Firefox is my browser of choice. I recently updated my Avast! antivirus. In the process, it automatically installed Google Chrome. I promptly uninstalled Chrome. Since then, from Outlook 2003, clicking on a link results in a "locate link browser" message and Firefox does not open. In Windows XP, I have gone into folder options, file types and there is no URL:HyperText Transfer Protocol. Neither can I add it because it is not in the drop-down list. I run regedit to try to delete four files called for in various help sites, but none of them are there. What can I do now without setting Internet Explorer as my default browser?

Try to undo and redo Firefox as the default browser.
Make another browser like IE the default browser and then let Firefox do it again.
See:
* http://kb.mozillazine.org/Default_browser
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

Clicking external links switches to Firefox but won't open

I use Thunderbird (31.1.2) on a Mac (OS X 10.9.4). I frequently need to proof e-mails that contain a number of links (for a digital marketing campaign). When I click a link in the e-mail, Firefox (32.0.3) opens or becomes active, and if I have NO other tabs, will open my link. But when I switch back to Thunderbird, and click a second link, Firefox will again become the active app but my link will NOT open.
Again, if I have NO open tabs, the first click always works, but no other clicked links will work beyond that.
If I switch to Safari as my default browser, everything works fine. So I'm forced to do that as a solution but I really don't like it.
Any thoughts to help?

I have the same problem. The problem is intermittent. Sometimes external links open immediately, sometimes they don't. Sometimes if I try several times in succession, the link will eventually open. If I manually copy and paste the link into a new tab, it always works.
Firefox is set as my default browser and set to check such at startup. When external links fail to open, Firefox DOES activate and become the frontmost application. It just fails to create a new tab from the external link.
I am using Firefox 32.0.3 on MacOS 10.9.5. I believe this problem started with the update before last (the same one that created the failure of CMD-L to open a new window which has since been fixed.)

Illustrator CS5 external links problem

My company has recently switched over to using Illustrator as our primary interface design tool. We have several designers working on a set of files. We are using externally linked files for shared components and for any file that has a bitmap image needed. We are having problems with having to relink or update the links every time we work on a file after someone else has.
A lot of us work remotely so we are all working on a different directory. However the project directory is kept the same. We have all of our files with a links folder with all of our links in the same directory (this is how we do our InDesign files too with no trouble). It seems like Illustrator is linking things with the full path not the relative path. This is a big problem for us. We've already tried going into Preferences > File Handling and having links updated automatically. It does seem to help with the linked ai files but not any of the bitmap ones.
Does any one know how to fix this? Does Illustrator really link things with a full path instead of relative? Is there something else going on here?
Thanks!!

Mike, that's right, that setting simply automatically updates without asking, the placed content that had been modified. This doesn't update the path to the linked file and I didn't say that. What I said in other words is: if the linked file is not found where the path indicates but the file is in the same folder as the .AI file then the path will be updated for the session (double clicking on the link will show the new path) and it will be saved in the file if choosing Save. If you close without Saving the path will not be changed in the file.
Quick example:
Create an .AI file, place a linked image in it, then save the file NOT in the folder where the placed image is, and close.
Move the image file in a third folder.
Open the .AI file and Illustrator will report missing link.
Close the file.
Move the image file in the same folder as the .AI file and open the AI file - now everything will be fine but when you close it it will ask you to Save even though you've done nothing because there is a change which is the new path of the linked file.

Set a external link into message maintanance in longtext or ..

Similar Messages

Maybe you are looking for