Set a preferred Wi-Fi connection or set sort order

Hi All,
In the Netherlands Wi-Fi Hotspot provided by Ziggo and UPC is based on a shared utilization of all Wi-Fi Modems delivered to each customer.
At the moment its impossible to configure both Home Wi-Fi connection and Wi-Fi hotspot at the same time without telling Wi-Fi configuration that when at home connection should always be made with Home Wi-Fi (which has much more band with than hotspot)
Would be very nice to have same functionality as on Mac devices to sort or set prefence for Wi-Fi networks
Avvn

alanfromnewtownards wrote:
Does that not mean you need to insert the wireless key umber as listed on the back of the router?
Not likely, that's just the router's MAC address -- it sounds like the OP doesn't know the password to get onto their protected network, that's what they need to provide.

Similar Messages

Unable to set Host Preferred Credentials in OEM

Hi Experts,
I installed Oracle 10g R2 on on windows machine (XP Professional SP2).
Everything is OK except I can't set Host Preferred Credentials.
I logged in Windows using Windows Domain account, connected EM DB console as sysdba.
I used domain user name to set Host Credentials and get the error:
Connection to "mysystemname" as user xxxx failed: ERROR: Wrong password for user
I also added the user to "Log on as a batch job" under Local policies.
Then I set oracle as Host Credential, still get the same error.
Please help me how should I set the Host Credentials for Oracle 10g on Windows?
Thanks in advance

The keyword here is domain user, so not local user.
Normally Oracle runs using a local account, and you need that local account to connect.
You can try to make sure the domain account is a member of the local ora_dba group.
If that doesn't work, you probably need to start the Oracle service using a domain administrator account.
Sybrand Bakker
Senior Oracle DBA

While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps back.

While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps and music back. Do I need to set the phone up as new again?

Hi Vidbrent,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden

I want to use my IPOD Classic 160gb for notepad entries in addition to the music and books I listen to. It is set to "Open ITunes when connected to computer" and "manually manage music and videos". How can I do that without losing some of the features

I want to use my IPOD Classic 160gb for notepad entries in addition to the music and books I listen to. It is set to "Open ITunes when connected to computer" and "manually manage music and videos". How can I do that without losing some of the features of those two? I just want to add a feature. Thanks

Settings>Store (or iTunes & App Stores if you are running iOS6)>Apple ID. Tap your son's ID and sign out. Sign in with your ID and password.
You shouldn't lose the music, but if you try to update any apps that you bought with the family ID, you will have to use that password that is linked with that ID in order to update.
Avoid downloading past purchased content with the old ID if you can since you will associate the iPad with the old ID for 90 days and you will lock yourself out of your own, new ID for that period of time. Read more about associated devices in iTunes here.
iTunes Store: Associating a device or computer to your Apple ID

My contacts suddenly disappeared from my iPhone today. When I tried to back it up and resync the phone it took away everything and went back to original setting that tells you to connect to iTunes. Unfortunatly now my computer is not recognizing the phone

My iPhone suddenly lost all contacts this afternoon. Hadnt even been using it. When I tried to Back it up and resync on the computer it wanted to update after installing the update to the computer it crashed the phone. Now I have no assess to the phone. It has gone to the original setting that tells you to connect to iTunes. iTunes does not recognize the phone any longer.

UNABLE TO RESTORE (connect to iTunes with cable logo)
If you are trying to restore and you device shows an image of a USB cable and connect to iTunes then carefully follow the steps in this article. You may need to do is several times http://support.apple.com/kb/ht1808

Error Message "The Remote device or resourse wont accept connection, not set up to accept connection from port https"

I get this error message when trying to open and log into an online casino "The Remote device or resource wont accept connection, not set up to accept connection from port https".
I am on a desktop computer my connection to the net is with a USB Virgin Mobile hotspot device.
I also have issues with some downloads not installing right for instance SKYPE wont work. If the problems are related I don't know
Thanks

Starting in Firefox 14, Firefox will guess an address and place it in the address bar (AutoFill feature). If you have ever connected to the site using a secure (HTTPS) connection, then Firefox will try to connect security to the address suggested by the AutoFill feature. To work around this you can:
* Edit the address to force Firefox to interpret your entry literally. For example, if there is a trailing / you can remove it.
* Turn off the URL bar AutoFill feature and just use the AutoSuggest drop-down.
* Clear Firefox's memory of the site so it doesn't default to a secure connection (however, this also removes any bookmarks you have to pages on the site).
To disable the in-address-bar autofill without losing the suggestions that appear below the bar:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''autofill''' and pause while the list is filtered
(3) Double-click '''browser.urlbar.autoFill''' to toggle it from true to false. You're done with about:config and you can close this tab.
"Forget about this site" will clear cache, history, bookmarks, and permissions for the site, and probably any saved certificate. There are two ways to get to this:
* History > Show All History, right-click an entry for the site > "Forget about this site"
* Type or paste about:permissions in the address bar and press Enter, then select the site from the list on the left side, and click the "Forget about this site" button on the right side
Depending on the size of your history and cache, this may lock Firefox up for a minute or two while everything is cleansed.

How to set password for Local are connection?

How to set password for Local are connection?

do you mean the 802.1x authentication?
check out links below:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_9_ea1/configuration/guide/scg/Sw8021x.html
http://technet.microsoft.com/en-us/network/bb545365.aspx
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

How to set user preferred timezone in OBIEE for all objects.

How to set user preferred timezone in OBIEE for all objects based on users TZ(may be from @{session.timeZone}). without changing My Account -> Preferences

Check
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

I have a set of 3 USB disk connected to my TC via a USB hud. I usually swithc the TC at night. When I restart the next day it stucks in amber state. when I disconnect the USB hub where my discs connects and restart, it start properly. Any hints?

I have a set of 3 USB disks connected to my Time capsule (TC) via a USB hub. I usually switch the TC at night. When I restart the next day it stucks in amber state. When I disconnect the USB hub where my discs connects and restart, the TC will start properly. Any hints?

LOL.. don't switch off the TC.. this is fairly typical behaviour..
Or try a different usb hub.. but you could well and truly run out of hubs before you fix the problem.
Are you running latest firmware for your TC?
What error message is coming up in the airport utility.. amber led is a fault indicator.. look up what the actual fault is and see if it is for instance overloading the usb. You are using a powered hub??
Get one bigger USB hard disk instead of 3 smaller ones.

Setting up a Wireless Internet Connection on Solaris 10

I am new to the whole Solaris/unix world and I was just wondering how to set up a wireless internet connection with a solaris 10 machine. I have a linksys router hooked up to a cable modem and a linksys receiver hooked up via USB on the solaris machine. I would greatly appreciate any help anyone can give me.

Was the router supplied by the ISP or was it bought separately? Are you able to get online when connecting the Mac directly to the router via an ethernet cable? Either way it's best to check the router settings to ensure they are correct.
I’ve not come across the Zoom routers. Setup should be straight forward though, having gone to their website and downloaded the manual. Do the following:
1. Plug one end of the RJ-11 cable (included in the box) to the router, the other end to your phone line via the micro-filter.
2. Plug one end of the ethernet cable (again included in the box) to the appropriate port in the router, the other end to your Mac.
3. Plug in the power cord and switch on
4. Fire up your web browser on your Mac (Safari, Camino, Firefox etc)
5. In the address bar of the web browser type 10.0.0.2 and hit the Return button
6. A Network Password box will appear. This is to gain access to the router itself. The defaults are, Username = admin, Password = zoomadsl
7. You’ll now enter the Basic Setup screen. It’s here where you enter the username and password supplied by your ISP. This is NOT your email username/password but your Internet access ones. If you are not sure or don't have them, call your ISP.
8. Click Save Changes and then click Write Settings to Flash and Reboot. Once the router has reset itself and the Link light comes on and remains steady, you’re online.
That’s it. Job done
If you still cannot get access it may be worth resetting the router (there should be a small button in the back which requires the use of a pen or pencil to press) re-entering your ISP information as described above and trying again.
Let me know how you get on.
Kryten

C How to Set Isolation Level in the Connection String

How to Set Isolation Level in the Connection String using the "Microsoft OLE DB Provider for DB2 Version 4.0"?
We are trying to move from Crystal Reporting that run against a IBM DB2 database on a mainfram to SSRS reporting and we have downloaded the "Microsoft OLE DB Provider for DB2 Version 4.0" and then worked with the DB2 Administrator to create the
Packages. We only have access to use the "Read Uncommitted ("MSUR001") package. We were able to connect and pull data before he removed access to the other packages, but after setting access the Connection keeps trying to use
the 'Cursor Stability (MSCS001)" package. How do we change the Default to the "Read Uncommitted ("MSUR001") package??? Since it is keeps defaulting to the the other package
we can't connect to do it in the T-SQL query, it has to be set at the Connection String level.

Hi Dannyboy1263,
According to your description, you want to set the Transaction Isolation Level in Connection String. Right?
In Reporting Services, the Connection String for OLE DB Connection can only contains Provider, Data Source and Initial Catalog. There's no property for setting Transaction Isolation Level in the Connection String. Based on my knowledge, we can
only set the Transaction Isolation Level at Query level or set it by using code (C#, VB, Java...) to call the property of Connection. So unfortunately your requirement can't be achieved currently.
Reference:
OLE DB Connection Type (SSRS)
Data Connections, Data Sources, and Connection Strings in Reporting Services
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

In the latest upgrade for iMovie 11' there is no "export to QuickTime" or other way to set your preferred export settings? can anyone explain how to do this now?

In the latest upgrade for iMovie 10' there is no "export to QuickTime" or other way to set your preferred export settings? can anyone explain how to do this now?

Export to Quicktime file in imoie 10 is explained here:
http://help.apple.com/imovie/mac/10.0/#move6e0cb2ad
Geoff.

Error in OFR : "No database connection string set for connection group"

Hi all..
In OFR, Batches Fail To Export When Line Pairing is Enabled and Batch Remains in State 750 With Error "No database connection string set for connection group".
I have followed all steps associated to line pairing with database still my batch is not exported..
Any help is appreciated..
Thanks in advance

Hi,
in case you haven't done this already: for this problem we'd really need you to open a CSS message.
From your problem description it sounds likely that LCA routines and liveCache user don't fit together. Please check the solution of note 811207 to see if that assumption is correct.
Furthermore: liveCache 7.5 and SCM 4.0 are not released together (yet). When using SCM 4.0 only liveCache versions 7.4.03 Build XX are released. This it seems you're current combination is not supported!
Please take a look at PAM (Produkt Availability Matrix) on the SAP Service Marketplace to see which combinations have been released.
Kind regards,
Roland
Message was edited by: Roland Mallmann

Object variable not set error in SAP-VB Connect.

This is the coding part i have used for connecting SAP and VB for creating the Sales Order in SAP.
But it gives the error in the line
oheader.Value("DOC_TYPE") = Text1(0)
as Object variable or With block variable not set.
What could be the reason, pls advise me.
Dim bapictrl As Object
Dim boOrder As Object
Dim oPartner As Object
Dim oItemin As Object
Dim oheader As Object
Dim oreturn As Object
Dim oconnection As Object
Private Sub Command1_Click()
Dim x As String
oheader.Value("DOC_TYPE") = Text1(0)
oheader.Value("SALES_ORG") = Text1(1)
oheader.Value("DISTR_CHAN") = Text1(2)
oheader.Value("DIVISION") = Text1(3)
oheader.Value("PRICE_DATE") = Text1(4)
oheader.Value("PURCH_NO") = Text1(5)
oPartner.rows.Add
oPartner.Value(1, "PARTN_ROLE") = Text1(6)
oPartner.Value(1, "PARTN_NUMB") = Text1(7)
oItemin.rows.Add
oItemin.Value(1, "REQ_QTY") = Text1(8)
oItemin.Value(1, "MATERIAL") = Text1(9)
oItemin.Value(1, "COND_VALUE") = Text1(10)
boOrder.createfromdata orderheaderin:=oheader, orderitemsin:=oItemin, orderpartners:=oPartner, return:=oreturn
x = oreturn.Value("message")
If x = "" Then
MsgBox "Transactin Complete"
Else
MsgBox x
End If
End Sub
Private Sub Form_Load()
Text1(4) = Format(Now, "mm/dd/yyyy")
Set bapictrl = CreateObject("SAP.BAPI.1")
Set oconnection = bapictrl.Connection
oconnection.logon
Set boOrder = bapictrl.GetSAPObject("SalesOrder")
'Set boOrder = bapictrl.GetSAPObject("BUS2032")
Set oPartner = bapictrl.DimAs(boOrder, "CreateFromData", "orderpartners")
Set oPartner = bapictrl.DimAs(boOrder, "CreateFromData", "orderitemsin")
Set oPartner = bapictrl.DimAs(boOrder, "CreateFromData", "orderheaderin")
End Sub
Thanks in advance
Regards
Rajaram

Hi,
This error occurred in the page where I used the file upload control. The control was working fine before. We tried installing entire PDK again and then applying the hotfix-1, but nothing worked and then I had to use an URL iview to invoke an ASP .Net application just for uploading the files.
Thanks
Swetha

HTTP Connection timeout setting

Hi,
I'm using ebXML protocol for B2B 10.1.2.3+MLR 5.
I talk to multiple trading partners and when one of the TP is down, we see that there is a pileup of messages in the backend queues.
This is because, there is constant message inflow into the JMS queues by the back-end application and each message is taking a long time to timeout (nearly 20 seconds). So what effectively happens is that a message was supposed to reach the TP in 1 sec will take 20 sec before it labels as a HTTP connection timeout error .
Can we set the HTTP Connection timeout setting in B2B? (I saw a setting in B2BGurus for EDI though)
If not, please can you suggest if it can be set in the Application Server level?
Please help!
Thanks in advance,
Warm Regards,
Suhas.

All,
At the application server level, there is a timeout setting in httpd.conf. The default value has been set to 300 seconds.
Regards,
Suhas.

Set a preferred Wi-Fi connection or set sort order

Similar Messages

Maybe you are looking for