Set a productive ECC as source for two BI's?

Hi,
I don't know if this is an obvious question (sorry if it is)... but I've looking for related info and found nothing.
I have my productive ECC system working as source system for the productive BI. Now I'd need to connect this ECC as source for my development BI system also. When setting the connection I get errors RSAR 371, RSAR 373, RSAR 374, RSAR 8 and E0 414. I found some threads about these errors but related to system changes. I don't want to change source systems but add a new one.
Is it possible to have an ECC as source for several BI systems?
Regards,
J.

Hi
Yes you can set up 2 BI system after ECC6 system.
Check that the set up of the logical source system in ECC is done correctly with specific idoc segments, specific ports of communication, etc.
You may haveto ask a basis expert for that
The only issue you might face is linked to the delta sources not target system dependant.In thatcases you might loose the delta data into one of your BI system
PY

Similar Messages

Mapping with Scd operator set to type 2 reading source records two times

Mapping with Scd operator set to type 2 reading source records two times.Records selected count being displayed at the end of execution is double the source record count.This possibly is affecting the performance of the mapping.
Is this a bug in scd type 2 operagtor in OWB 11gR2.How to rectify this umwamted double loop through the source data selectiom?

Hi Roelant,
I think it is important to be aware that although Paris - 10gR2 - is not actually buggy (in this respect!), it is really quite idiosyncratic in exactly how it processes SCDs.
I followed up on your and Mark's comments, and did an in depth analysis of this topic. It is at http://www.donnapkelly.pwp.blueyonder.co.uk/documents/OWB_10gR2_SCD.pdf
My conclusions are perhaps of interest to anyone considering doing SCD processing with Paris.
I'll be doing a follow-up this weekend, and publishing a sort of 'how-to-do-it' guide.
Cheers,
Donna
Message was edited to add the words: "in this respect"

Is it possible to use same data source for two info cube

Hi,
My Problem is in BW we can not have value of material at storage location level.In R/3 also value is maintained at plant level.
Then we searched and we found out one hot to doc for summarized display of stock values on storage location level.
Problem is that we have gone live in last December and we are using " 0AFMM_C02 " and it contains around 1,81,26,000 records. and according to note we have to use
"0IC_C03".
Both the cube uses same data sources for the data.So, how to get the data for "0IC_C03".
and how to delete the data of existing info cube.And is it possible to delete data selectively from the info cube.
Pls. help.
Regards,
viren.

Hi,
You can't create update rule from PSA.You can create from the infosource or from ODS or from cube to cube or ODS to ODS.
In your scenario, what you can do is create update rules from the ODS to the new cube and then transfer the data from there. Or from the Infosource create rules to the new data target and then upload the full data and then set up the delta.
Third option is to create update rules from the existing cube to the new cube and then load all the data one time. Then you can deactivate the update rules as that was needed only for 1 time data transfer.
Cheers,
Kedar

How to set up 2 separate iPhoto libraries for two users

My wife and I have a macbook air, she being one user and me the other. We both have iphones and recently upgraded to the 5s. She had not ever openned itunes or iphoto on the computer as she used the it mainly for word processing, email and surfing the web. I, on the other hand, would play around in iphoto and ensure photo streaming was working and have a large itunes music collection.
When I openned up her iphoto, all my photos from my account downloaded into hers. I forget what I did to make this happen but it might have done so automatically.
My question is: how can I set up her own iphoto account when she is logged into her user account on the computer? We don't wish to share iphoto libraries as now is the case.
And, this might not be the correct forum to bring this up, but when I take pictures on my iphone 5s, they stream to her iphoto library as well as mine. But, her pictures taken on her iphone don't stream/backup to either of our computer iphoto libraries even though she has an icloud account and photo streaming turned on on her phone.
I hope this makes sense as there are really 2 questions: setting up a separate iphoto library for each user on one computer, and, how to get photo streaming from her phone to her library
Thanks in advance for any help

First you both have to have your own user accounts on the MBA and separate iCloud accounts. From there it's relatively simple to create you own libraries and have your respective iPhones link to those library when both devices are logged into the same iCloud account.
OT

Using multi-threading: Setting a VI to be used for two sequences at same time

I have two sequences running as two different threads. This is supposed to be in parallel but both sequences access the same VI, then they're not executing as parallel because one sequence use this VI then liberates it and the other sequence use it, and so on consecutively until both sequences finish. This is not what I want.
How can I do to set this VI with any kind of property or something that can be accessed for both sequences at the same time?
Thanks,

Hi Margarita, you can set a VI to be reentrant (under VI Setup»Execution Options from TestStand, this function can also be used from LabVIEW) . Now depending on the king of VI you are using this can be something safe or can cause trouble. If the VI needs to keep information (for example a Functional Global Variable) or it is handling Hardware it can give you errors (for example trying to access the same DAQ at the same time from different task.
If you need more information can you tell us what does this VI does?
This Links might also be useful:
When I Run Parallel TestStand Executions That Call the Same VI, Why Don't the VIs Run in Parallel?
Differences Between Reentrant VIs (Preallocate), Reentrant VIs (Share Clones), VI Templates, and Dyn...
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

Setting up iTunes on new computer for two users

I just got a new Windows 7 laptop and I'm trying to figure out how to transfer two distinct user libraries to the new computer.
A little background: My wife and I have been using the same computer for years with different user accounts - she had her 30 GB iPod with all her music, and I had my 80 GB iPod with all my music and playlists. All of our music, however, has been saved and configured to work with an external hard drive (E:\iTunes).
I'm keeping the external hard drive with the new computer, and since all the file paths are configured to match up with E:\iTunes, it seems like it should be really easy to make the switch to the new computer. But so far it isn't.
I installed iTunes 9 on my new computer and set the default file path to the E: drive, enabled my iPod for disk use, and tried synching my iPod, but the only songs that transferred were those that I had purchased via the iTunes store -- which wasn't very many.
What am I doing wrong? What do I need to do so that when I plug in my iPod the iTunes on my new computer replicates my old library, playlists and all? I don't want to manually copy over the entire E:\iTunes folder because there are a lot of tunes on there that I don't want or need -- files that I will eventually have to upload for my wife's account and her iPod.
Any help the users on this forum can offer would be appreciated. Thanks!

It depends on whether the entire iTunes folder, including all the library files, are on the external drive, or that drive contains only the music.
First, resetting the location of the iTunes Music folder in the iTunes preferences, by itself, only sets where future purchases and imports go. In and of itself it won't reset where iTunes looks for tracks already in the iTunes library. That's all contained in your former library files. If those were on the old computer and no longer available, use the Add Folder to Library command in iTunes and select the folder on the external drive that contains the tracks. That will get them into iTunes, though you'll have lost all your playlists, ratings, and playcounts (which are also in the iTunes library files).
If the iTunes library files are also on the external drive, launch iTunes while holding down the Shift key and navigate to and select the folder containing the library file.
If the library files were on the old computer but you still have access to it, you may be able to copy the library file to the same place on your new computer, presuming the path to the external drive remains the same.
Hope this helps.

Problem setting up Weblogic's data source for oracle

          Hi!
          I am trying to setup XA DataSource Pool for Oracle using Weblogic's driver. App-Server
          throws exception during startup.
          config.xml setting are appended with this posting.
          Can somebody help me identifying the problem?
          Thanks,
          Vinay
          <JDBCConnectionPool
          Name="WL_XA_1_Pool"
          Targets="examplesServer"
          CapacityIncrement="1"
          DriverName="weblogic.jdbc.oci.xa.XADataSource"
          InitialCapacity="1"
          JDBCXADebugLevel="1"
          MaxCapacity="5"
          Properties="user=vinay;password=vinay;dataSourceName=WL_XA_1_Pool;serverName=pqasun1"
          RefreshMinutes="0"
          ShrinkPeriodMinutes="15"
          ShrinkingEnabled="true"
          TestConnectionsOnRelease="false"
          TestConnectionsOnReserve="false"
          URL="jdbc:oracle:oci8:@PlatformTest"
          />
          [error_wl2.txt]


          Hi Dinu,
          Silversword is our upcoming maintenance release for WLS 6.0, and
          should be available in June timeframe.
          If you are only using 1 database instance, you can use Oracle's
          driver in non-XA mode in distributed transactions. Please refer
          to "Configuring non-XA JDBC drivers" section for details: http://e-docs.bea.com/wls/docs60/adminguide/managetx.html#1045803.
          -- Priscilla Fung, BEA Systems, Inc.
          "Dinu Ramanthara" <[email protected]> wrote:
          >
          >Hi,
          > What is Silversword?
          >
          > I need to use Oracle's Driver as I have to use Oracle
          >AQ and Oracle
          >AQ doesn't seem to work with jDriver. All my database
          >activity,
          >through AQ as well as through JDBC are restricted to the
          >same Oracle
          >instance. Given that what are my options? Should I use
          >Oracle 8.1.6
          >drivers or should I use 8.1.7 drivers.
          >
          >Is there a document/sample code illustrating what need
          >to be done
          >to bind Oracle's XADataSource to the JNDI tree.
          >
          >Regards,
          >Dinu
          >"Priscilla Fung" <[email protected]> wrote:
          >>
          >>Hi Vinay,
          >>
          >>A couple of things to note. Oracle 8.1.6's driver has
          >>a bug that
          >>does not accept foreign Xid, and thus cannot be used
          >with
          >>any 3rd
          >>party vendor's Tranaction Manager, including WLS. Oracle
          >>8.1.7's
          >>driver has fixed this problem, but they have threading
          >>issues.
          >> We have worked around the threading issues in Silversword,
          >>but
          >>not in WLS 6.0 release. For now, the only Oracle XA
          >driver
          >>we
          >>recommend is Weblogic's jDriver for Oracle.
          >>
          >>-- Priscilla Fung, BEA Systems, Inc.
          >>
          >>
          >>"Vinay" <[email protected]> wrote:
          >>>
          >>>
          >>>
          >>>
          >>>Hi!
          >>>
          >>>I am trying to setup XA DataSource Pool for Oracle using
          >>>Weblogic's driver. App-Server
          >>>throws exception during startup.
          >>>config.xml setting are appended with this posting.
          >>>
          >>>Can somebody help me identifying the problem?
          >>>
          >>>Thanks,
          >>>
          >>>Vinay
          >>>
          >>>
          >>>
          >>>
          >>> <JDBCConnectionPool
          >>> Name="WL_XA_1_Pool"
          >>> Targets="examplesServer"
          >>> CapacityIncrement="1"
          >>> DriverName="weblogic.jdbc.oci.xa.XADataSource"
          >>> InitialCapacity="1"
          >>> JDBCXADebugLevel="1"
          >>> MaxCapacity="5"
          >>> Properties="user=vinay;password=vinay;dataSourceName=WL_XA_1_Pool;serverName=pqasun1"
          >>> RefreshMinutes="0"
          >>> ShrinkPeriodMinutes="15"
          >>> ShrinkingEnabled="true"
          >>> TestConnectionsOnRelease="false"
          >>> TestConnectionsOnReserve="false"
          >>> URL="jdbc:oracle:oci8:@PlatformTest"
          >>> />
          >>>
          >>
          >

Same rule set for two apply processes

Hi!
Can anyone tell me whether it is possible to use the same rule set and all rules in it for two apply processes? It would be easy for me to use such configuration, because sometimes I create LCRs myself, sometimes Oracle captures them. They're exactly the same.
And second question - I tried the above configuration, but the apply process for user created LCRs aborts when it sees first message. Error is: "ORA-00600: internal error code, arguments: [knlcfpactx:any_knlso], [], [], [], [], [], [], []". Oracle MetaLink and Google know nothing about this error. I also don't know if it's somehow connected with these rule sets or is it a problem within my procedure which creates LCRs.
Greetings

I'm answering myself. Yes, it is possible, to use the same rule set for different processes. It is said in the documentation. It is also possible to use one rule in several rule sets according to documentation.
And it seems that it has nothing to do with my ORA-00600 error.

Using Oracle BI Server as a Data Source for Third Party Tools

I have been researching how to use the Oracle BI Server as a data source for two days now. I have not yet found a solution to my problem.
We have a remote user who is pulling data from one of our Oracle databases using automated tools. This data base is essentially being replaced by Oracle Analytics. However, we do not want this user to get at the physical tables of Analytics, rather, we want the user to be able to connect to the Oracle BI Server itself, and issue Logical SQL to pull data.
Here are the requirements which I need to be fulfilled:
1) The ability for a remote user to connect to the BI Server as a data source.
2) The remote user must be able to do this on a Unix box.
3) The remote user must be able to automate the process of issuing SQL to the BI Server. (Command line interface is preferable)
4) The solution needs to be easily implementable, that is, this solution will be implemented many times over.
I found many articles explaining how to set up a Windows box to connect to the BI Server in this way. However, these articles outline how to use tools like Excel and Microsoft Query to pull data from the BI Server. Our current user is using SQLplus.
If possible, I would like the user to continue using SQLplus as the tool for connecting to and retriving information from our BI Server. I have tested using SQLplus many different ways to no avail. I have also tried using other tools, such as Oracle SQL Developer.
Is there a program out there that will fulfill the needs I have outlined above? Or, does someone know of a way to use SQLplus to connect to the Oracle BI Server as a data source? Or, is there a series of solutions which will fulfill the needs outlined above?
Edited by: user11177366 on Jun 11, 2009 11:46 AM

I agree it would be inefficient but only because you are using OBIEE for something it was not designed to do. You are basically asking for a "DB feed" and that should designed using PL/SQL, DB Links, Web Services or whatever is your entreprise standard to send data from one system to another. Using OBIEE for this seems a bad architecture decision to me.You are correct, the BI Server is not really intended to be queried like another Oracle Database remotely. However, the reason we are trying to do it this way is twofold:
1) We want to enforce data level security.
2) The BI Server has been fine tuned for high performance.
Forcing the end users to go through the BI Server rather than directly to the physical tables or other sorts of systems built on top solves both of these issues.
I think you are wrong. I don't see why SQLPlus should be able to query the BI Server. The BI Server can sit on top of many different DBs not just Oracle, even flat files etc. So you can't really expect the BI Server to able to translate all that into Oracle SQL output so you can query it using SQLPlus. The BI Server is not an Oracle RDBMS.You're right again. The BI Server isn't an Oracle RDBMS, and I have been wanting to treat it like one. From the data I have gathered SQLPlus can't query the BI Server.
However, my research has led me to realize that the BI Server supports the JDBC API. Therefore, (I should have went down this route in the first place) one can use the JDBC driver provided by Oracle (bijdbc14.jar) to interface with the BI Server. There are many programs and applications out there that support the JDBC API and let us connect to BI Server the way we want to. Furthermore, these programs are mostly platform independent, as they are mostly written in Java.
Lastly, from what I understand the NQCMD program can be installed on any platform as well (provided by Oracle). This is another option to connect to the BI Server as well.
Thanks for your help and your comments as I went through this process of discovery.

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

HT201269 Can I set up two accounts for two different iPhones on the same iTunes account. Jimmy

Hello,
CanI set up two accounts for two different iPhones on the same iTunes account. Thanks JIMMY

http://support.apple.com/kb/ht1495
You can use the same apple id for two separate phoones to share apps/music, however you would need a separate apple id for both phone for imessage/facetime/icloud.

How can I set up my Mac for two users to share photos, music etc

How can I set up my Mac for two users to share photos, music etc?

On the Mac with the libraries you want to share:
iTunes Preferences click on the Sharing tab and put a tick in 'Share by library on local network'.
iPhoto Preferences click on Sharing and put a tick against 'Share my photos'.
When launching the same apps on other Macs on the network the libraries should be available, listed on the left.

How to set up passwords for two Comcast email accounts on Mail?

Have Leopard. Cannot set up passwords on Mail for two Comcast email accounts. Does anyone know how to do?

Hi Paul, & a warm welcome!
Lineone
Login
[email protected]
Incoming email (IMAP)
imap.lineone.net
Incoming email (POP3)
pop3.lineone.net
Outgoing email (SMTP)
smtp.lineone.net
What port & Authentication are you using?
Can you login with your credentials in a Browser using the same info?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the exact message?
Then click the Show Details button & Check again.
The Password rejection can confuse people since it's a catch all meaning...
This Password, Username, Authentication method... is not recognized on this Port to this Server, or a server end problem.
If using a browser to login via WebMail works it's not Name or Password, but one of the other ones.
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

HT4314 I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not ha

I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not happy?

By "game center account", do you mean Apple ID?
If so, you can change it.
1. Tap settings and navigate to iTunes and App Stores
2. Tap "Apple ID" and then tap "Sign Out"
3. Log in with a different ID.

Transfer rules are not exist for ECC Quality source system in BI Dev

Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandra

Hi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks

Set a productive ECC as source for two BI's?

Similar Messages

Maybe you are looking for