Set a text value to more pages...problem

So how do I archieve this? I have a TextField1 in Page1(subform), and TextField2, 3, and 4 on pages 2, 3, and 4. If I change TextField1 all the other textfields must have the same text as in 1...Or can some one give me a idea were to look in the help file...?
Thanks in advance
Jim

[email protected] wrote:
> So how do I archieve this? I have a TextField1 in Page1(subform), and TextField2, 3, and 4 on pages 2, 3, and 4. If I change TextField1 all the other textfields must have the same text as in 1...Or can some one give me a idea were to look in the help file...?
>
> Thanks in advance
>
> Jim
Set the fields to use global binding (on the binding tab). This will automatically keep the values
of all of the fields in sync.
Justin Klei
Cardinal Solutions Group
www.cardinalsolutions.com

Similar Messages

  • How to set a default value for a page item

    I am working with a facility table that has name and address information. The user can add contact name information on a separate page. Since the address for the facility and contact is usually the same, I want to add a default value for the contact address. The facility page is on 201 and the link to add a new contact row is on page 202. I showed in the default value :P201_street for the contact's address. But, when I run the page, the contact address field shows the :P201_street, not the actual facility address. What am I leaving out? Must be something obvious?!
    Thanks very much.
    Judy

    In the default value, I showed: v('P201_STREET1') with the default value type of: PL/SQL Expression and received the following oracle error ==> Item default is not a PL/SQL expression. Use &ITEM syntax. The v('ITEM') syntax is not valid for item defaults. So I changed it to: &P201_STREET1 and got another oracle error , ERR-9132 error in PLSQL expression for item default code, item=P202_STREET1.
    Any more suggestions? Thx.
    Judy

  • How to programmatically set the value to current Page layout property?

    Hi,
    How do I set any text value to the current page layout [comment] property and save it.....here my current page is using a custom page layout called spPageLayout1
    To be very much generalized how I can set and save any value to current page property programmatically....on load event I need to set the value.
    It is a publishing page layout.

    Hi,
    According to your post, my understanding is that you want to set the value to current Page layout property.
    To get current page property, you can refer to:
    How to get current Pages details in SharePoint2010 publishing site
    Get Content Field Value in Article Page
    To get current page layout property, you can refer to:
    PublishingPage.Layout Property (Microsoft.SharePoint.Publishing)
    PageLayout.Title Property (Microsoft.SharePoint.Publishing)
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Problem when passing non English text to another amx page

    Hi,
    I'm using JDeveloper version 11.1.2.3.0 under windows 7, to deployed ADF Mobile application into android device,
    when i used the application to pass 3 input text value to another page (or object)
    i note that if passed the 3 text without any English character (means just Arabic,Urdo,Farsi ...)
    the next page will received only the last text and the others will be null
    that means the other texts Value Change Listener dose not work, they will work just in one case if i used English
    or any other special Character (Space bar, Back Space ...) in order to invoke that action
    Any help plz
    Note:- when i deploy it to iPhone device it is work fine
    Edited by: user2397713 on Jun 5, 2013 3:11 PM

    Hi,
    do you have a test case and instructions for me to try and run. Just create a simple page-to-page use case and send it in a ZIP file (renamed to ZIP) for me to test on 11.1.2.4 and file a bug if required. If you have a support contract, you can file a service request with support. My mail addres sis in my OTN profile, just click my name link.
    Frank

  • Setting an item value before print report in BI Publisher

    Hi,
    I am having an issue with setting a page item's value once a button (that prints a BI Publisher report) is pressed. The session state for the item is set, however because the page does not re-load no value appears in the item on the page.
    I am using a button as a page Item and using a Page Branch with the Branch Point set as On Submit: After Processing(After Computation, Validation, and Processing) with the Page set to 0 and the Request set to PRINT_REPORT=REPORT
    Is there any way to set the item value on the page before branching to the report?
    Your help is greatly appreciated.
    -Marsha

    Marsha,
    You can do that as follows:
    1- create a hidden text item (P20_date_hidden) with default value set to sysdate.
    2- for your button >> edit >> Buttom display attributes >> attributes >> type in : onFocus= "set_date();" (( note: am using onFocus because it takes places before onClick ))
    3- In your page >> edit >> HTML header >> type in :
    <script language="JavaScript" type="text/javascript">
    function set_date()
    v_date = $x('P20_DATE_HIDDEN').value;
    $x('P20_DATE_LETTER_SENT').value = v_date;
    </script>
    Hope this helps,
    Sam
    Please reward good answers by marking them correct or useful!

  • How to customize the content set in text as part of tag cq:text property="text"/

    We use the tag <cq:text property="text"/> to get the content, which is set in the jcr property "text".  Text was set in Richtext component and it has hyper link.
    Now, we have to customize the text.
    Example:-
    Actual Text in 'text' property:-
    <p>Click <a data-action="Hyperlink" data-upc-tooltip-type="none" href="/content/www-abc-healthcare-ch/en/offer.html">here</a> for the link</p> <p></p>
    After customization in 'text' property:-
    <p>Click <a data-action="Hyperlink" data-upc-tooltip-type="none" href="/content/www-abc-healthcare-ch/en/offer">here</a> for the link</p> <p></p>
    i.e .html has been removed.
    I tried customizing and set back to text attribute using <c:set var="text" value="<CustomizedText>" /> but even after that tag <cq:text property="text"/> retrieves the old content i.e with .html
    Please suggest how to override text content, so that the tag <cq:text property="text"/> will print customized text.

      Which version of cq? Is Strict Extension Check enabled at  http://<host>:<port>/system/console/configMgr/com.day.cq.rewriter.linkchecker.impl.LinkCheckerTra nsformerFactory
    Thanks,
    Sham

  • Malfunctioning of Poplist while setting a default value in it via program

    Hi,
    I have 2 Pages.
    1)Search Page 2)Generic
    I need to add the a value into a Poplist in Generic Page from a Search page.
    and I need to set the added value(from Search Page) as the default in the Poplist.
    I am able to add that value into Poplist in Generic page.and I used following line to set it as the default in PR()
    favfluidChoice.setSelectedValue(fluid);
    The new value(fluid variable) is getting defaulted.
    However, when I change the entry in the Poplist, I still see the programmetically set value.
    Ex: I have set Fluid = AIR programmetically.
    Now when I run the Page,even though I change the Poplist entry to say.. WATER, I stil see AIR in it
    How can I solve it?
    Thanks,
    Gowtam.

    How are you adding the new value to the poplist ? Try adding it in the first row of the PopLists VO and remove the blank field by setting includeBlanks property to false.
    Thanks

  • How to set text resources avoiding automatic page update with c:set tag

    Hello everyone,
    I'm developing my web application with JDeveloper 11.1.2.3.0 in order to support two language locales (en and de). Following this guide I've performed the following steps:
    Creation of two property files (Resources.properties and Resources_de.properties) with the key-value entries;
    Modify of faces-config.xml file adding these lines:
    <locale-config>
            <default-locale>en</default-locale>
            <supported-locale>de</supported-locale>
      </locale-config>
      <resource-bundle>
          <base-name>view.Resources</base-name>
          <var>res</var>
       </resource-bundle>
    In the project properties > Resources Bundle I've checked:
    Automatically Synchronize Bundle;
    Warn about Hard-coed Translatable Strings;
    Always Prompt for Description.
    In the same place I've set the default project bundle name to view.Resources.
    In a test JSP page I've a outputText with the value #{res['HELLOWORLD']} where HELLOWORLD is the key in the property files. All works fine, and the correct string is shown based on locale browser settings.
    Anyway, when I use the "Select Text Resources..." menu in any text value choosing a value from the default property file, JDev automatically adds the following tag:
    <c:set var="customuiBundle" value="#{adfBundle['view.ViewControllerBundle']}"/>
    setting the value of the text in #{ViewControllerBundle.HELLOWORLD}.
    There is a way to avoid this behavior? Can I manage the resources in a different way? I would to choose a value from the list in order to get the res.KEY value instead of ViewControllerBundle.KEY value.
    Thanks in advance for your help.
    Manuel

    don't select from menu - go to source and write it . The problem with the tools is they have a certain way of doing things and don't think we should spend time customizing jdeveloper rather concentrate on the work in hand.

  • How to set cookie value in one page and retrieve in another page using setA

    How to set cookie value in one page and retrieve in another page using setActionListener?
    I have tried with following code srcpage.jspx->destpage.jspx
    srcpage.jspx
    <af:table value="#{bindings.DepartmentsView1.collectionModel}"
    var="emp" rows="#{bindings.EMPView1.rangeSize}"
    first="#{bindings.EMPView1.rangeStart}"
    emptyText="#{bindings.DepartmentsView1.viewable ? 'No rows yet.' : 'Access Denied.'}">
    <af:column sortProperty="EmployeeName" sortable="false"
    headerText="Cookie Testing">
    <af:commandLink text="#{emp.EmployeeName}" action="success">
    <af:setActionListener from="#{emp.EmployeeName}"
    to="#{cookie}"/>
    </af:commandLink>
    </af:column>
    </af:table>
    espage.jspx
    <af:outputText value="Test Cookie Value: #{cookie}"/>
    ,Here Test Cookie Value prints the following instead of its original String value
    {JSESSIONID=javax.servlet.http.Cookie@7da288, oracle.uix=javax.servlet.http.Cookie@399f62}
    I have passed employee name "Robert" to cookie in srcpage.jspx,but it prints "JSESSIONID....." instead of "Robert" in destpage.jspx
    Thanks in advance
    Kalee

    Hi,
    "cookie" is a reserved name. If you want to write to a session scope attribute called "cookie" then you have to call #{sessionScope.cookie}. If you want to use EL to set and read from cookies then you will have to use
    #{cookie.cookieName}
    Note that #{cookie} writes to and returns a map
    check this: http://www.informit.com/articles/article.aspx?p=30946&seqNum=7
    Frank

  • Help ! using Calendar & adding text to a page problem !!

    Let's hope I make this clear enough for someone to understand.
    I am making up a Calendar & I want to add text to certain pages ( photo ).
    I click on 'Design' & pick option 2 ( the one where you can add text ), now here is my problem. The text box always starts the text from the right, when I have added the text I want to move it over to the Left or make it central but nothing happens when i hit the space bar, it stays on the right.
    Does anyone know a way so I can either move the text over to the Left or do something else to get it on the left or where ever I want it ?
    This is most frustrating. If I hit the 'spacebar' now I end up here.
    So why can't do it in Calendar !! OR am I just thick & missing something.
    Steve ( hope I made myself clear )

    Steve:
    What theme are you using? In my Pictures calendar the text box below the photos start at the left, i.e. left justified.
    But here's a possible way to get it where you want:
    1 - type in the text as you want, setting the size and font for the calendar.
    2 - copy the text out of the text box
    3 - open a text editor and past the text into it.
    4 - in the text editors formatting section select "left justification".
    5 - select all of the text in the text editor
    6 - do a select all in the calendar text box and past the text from the text editor. That should change the justification to whatever you want, left or center.
    Do you Twango?

  • Iam using a table in numbers to plot daily graph lines. If I fill a cell with a text box  at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is tho

    I am using a table in Numbers to plot daily graph lines. Mood swings of how I am on the day, i"m a depressive.
    If I fill a cell with a step box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is there a work around. so thatbgraph only plots on the day?

    The answer is (sort of) in your subject, but edited out of the problem statement in the body of your message.
    When you use a stepper or a slider, the value in the cell is always numeric, and is always placed on the chart if that cell is included in the range graphed by the chart.
    But if you use a pop-up menu cell, you can specify numeric or text values in the list of choices for in the menu. Numeric values will be shown on the chart. Text values will not.
    For the example, the values list for the pop-up menu was:
    5
    3
    1
    Choose
    -1
    -3
    -5
    The first pop-up was set to display Choose, then the cell was filled down the rest of the column. Any text value (including a single space, if you want the cell to appear blank) may be used instead of Choose.
    For charts with negative Y values, the X axis will not automatically appear at Y=0. If your value set will include negative values, I would suggest setting the Y axis maximum and minimum to the maximum and minimum values on your menu list, rather than letting Numbers decide what range to include on the chart. Place a line shape across the chart at the zero level, and choose to NOT show the X axis.
    Regards,
    Barry

  • How Can I Set a Javascript Value into an Attribute of BSP PAGE

    Hi
    Can anyone tell me.
    How Can I Set a Javascript Value into an Attribute of BSP PAGE

    Hi Mithlesh,
    javascript runs on client side and you cannot assign the value to a Page attribute directly.
    As a workaround,you can use an Inputfield,hidden if required,and set the value using javascript.Then the form will have to be submit to be able to read the value in onInputProcessing and then can be assigned to any variable.
    In Layout
    <head>
    <script language="javascript">
    function pass()
       txt1 = document.getElementById("ip_mrf");
       txt.value = "hello" ;
    </script>
    </head>
    <htmlb:inputField  id="ip_mrf"
                               value="<%=mrf_number%>"
                               visible="FALSE"/>
    in onInputProcessing
    cha1 = request->get_form_field( 'ip_mrf' ).
    where cha1 is the page attribute
    hope this helps,
    Regards,
    Siddhartha
    Message was edited by: Siddhartha Jain

  • E book" it tells me that the bI have prepared a photobook, made a pdf and when I press "buy the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

    I have prepared a photo book, made a pdf and when I press "buy thhe book" it tells me that the book is missing photos on one ore more pages. The book does not miss any photos or text, all layouts are ok, the background color is ok. Can anybody help me?

    You are missing one or more photos - youprobably have a page background that requires a photo which is behind a page with photos on it - all pages must either have a photo or be a color - if you have a gray background it requires a photo - look through the book carefully and be sure to look at the background on any full page photos - you will find one or more missing photos
    LN

  • Setting default field values for multi-line text fields in lists?

    For the multiple lines of text field in a list, I'm using SharePoint Designer 2013 to set a default
    value for the field, but I need that default value to include rich text formatting (the default value includes a formatted table). Is this possible without having to delve into JavaScript? And if so, how?

    Yes, we can :)
    You can do it with powershell
    $web = get-spweb <yourweb>
    $list = $web.lists["<yourList>"]
    $field = $list.fields["<yourField>"]
    $field.DefaultValue = "place your html code here"
    $field.update()
    hope that helps

  • (Administration - Marketing - Import), you can set a parameter value "Import mode" for what to do in case of duplication as "update existing records", "Import new records". The final report of this import is presented as a text file that can be viewed in

    Administration - Marketing -> Import, you can set a parameter value "Import mode" for what to do in case of duplication as "update existing records", "Import new records". The final report of this import is presented as a text file that can be viewed in Business Administration - Marketing -> Import -> Exceptions. Whatever the exception, including duplication import occurs during import and recorded in a text file.   What are the fields that determine the duplicity? How I can I can change those?

    You will be returned anything that is in the option's value parameter. What is displayed in the dropdown and what is put in the value attribute do NOT need to be the same, so maybe you should start there.

Maybe you are looking for

  • Which is better? iPhone 4 or the 4S?

    Due for an upgrade in dec/Jan. Currently using 3GS. Is the 4S still having problems?

  • Export updates

    Hi everyone I want to  Export Update Metadata from internet connected WSUS servers to internal WSUS Server(Both in Different isolated Domains) On the internet Connected WSUS Server, i have used the below command. C:\PF\Update Services\Tools>wsutil.ex

  • Site update strategies query.

    I've got my iWeb site up and running now, and I'm very happy with it. I've incorporated Haloscan comments via iComment as well as StatCounter. The problem is that the "post-processing" that I do is lost each time I decide to add a blog entry or other

  • Help with dll adapter

    I'm currently using labview to call a dll but want to use teststand. I'm having trouble understanding the function prototype format. I've attached a picture which shows the prototype with labview. Can someone show me how to get teststand to make the

  • ESS Address/Bank application error at NW04s SP13

    Dear All, We have recently upgraded from NW04s SP11 to SP13. Now ESS Pers Info application are behaving strange.. When we open these application we are able to view only Road Map (coming from FPM) and Navigation part (previous button from per DC). Bu