Set argument value

Hi,
I have a Job below. And passing an argument value to it.
sys.dbms_scheduler.set_job_argument_value( job_name => '"SCHEMA1"."TEST_JOB"', argument_name => '"IN_DATE"', argument_value => 'sysdate');
I am passing sysdate. This is a daily job and every day the in parameter is sysdate only.
Did I pass the value correctly? worrried about the quotes around sysdate.
Should that be 'sysdate' or sysdate?
G.

Hi,
If you pass 'SYSDATE' the literal value 'SYSDATE' will be passed which is probably not what you want.
If you pass SYSDATE the value of SYSDATE as a VARCHAR2 is passed which is probably what you want. However this is evaluated only at argument-setting time, i.e. all runs of the job will run with the same job argument value. This may or may not be what you want.
If you want the value of SYSDATE on the day the job is scheduled to run , you could just use SYSDATE in the job action or use the metadata argument job_scheduled_start.
Hope this helps,
Ravi.

Similar Messages

How to get argument value from portal desktop URL

hi,guys
I have a question ,it is how to get argument value.see:
in one portal desktop,I have a hyperlink like this
http://localhost:7001/TestPortal/appmanager/testPortal/testDST?eventId=1
after click,then will be switch another desktop "testDST"
I tried to get value from request,but failure.
@RequestMapping
public String listTestList(RenderRequest request, RenderResponse response,ModelMap model) {
//HttpServletRequest httpRequest = (HttpServletRequest) ; //request.getAttribute("javax.portlet.portletc.httpServletRequest");
//log.debug("httprequest eventId>>>" + httpRequest.getParameter("eventId"));
log.debug("render request eventId>>>" + request.getParameter("eventId"));
I can't get this value from request,also tried httpServeltRequest,but httpServletRequest can't get,it is null;
so ,how to get this value,thank you very much.
regards
aris

Hello,
It is true for JSR168 portlets that you can't just arbitrarily set parameters on a URL and get access to them inside your portlet- you must use the appropriate APIs on the PortletURL class to set parameters that you can retrieve. This is the only portable (standards-compliant) way to implement the functionality you want.
However, for your particular use-case, you can get the URL parameters from the (non-JSR168) HttpServletRequest object. The only reason you are getting a null object for that is because the attribute name is wrong. This should work:
HttpServletRequest httpRequest = (HttpServletRequest)(request.getAttribute("javax.servlet.request"));
String eventId = httpRequest.getParameter("eventId");
Kevin

Setting the value of a textbox from another page

Hi Everyone,
I have a multi paged application (multiple xib, multiple controllers)
In my selection view, the view that holds the UIViewPicker control, I need to populate the page that called the selector page...
I have the code to identify what page called the selector, and when the page is dismissed, I need to fill in the field from the calling page.
I have included the header of the calling view in my selector view, and now I need to be able to fill in a readonly textbox in the calling view....
Do I need to setup a property for each of the textboxes in the calling view, or can I populate them directly??
thanks
tony

alt-088 wrote:
I am sorry, but I am lost in this implementation....
How exactly do I tell the self.parentViewController what control will receive the new text value??
Ooooops!! I'm the one who needs to be sorry, Tony:
// from previous post
- (void)setTextInParent:(NSString* textValue) {
// assume that every possible parent controller has a "textbox" object
// which is a member of some class that has a writable 'text' property
[previousViewController setValue:textValue forKey:@"text"]; // <-- * Idiot alert *
Looks like another one of my senior moments. As you pointed out, we need the value of the 'textBox' property before we can set the value of the 'text' property.
To your question on how I am displaying the second view, it is called via
[self presentModelViewController:screen animated:YES]
from a button click event
Cool. That means we already have the address of vc1 in the 'parentViewController' ivar of vc2, so we don't need to add the 'previousViewController' ivar shown in my example.
So here's a corrected and maybe more relevant example--this one has been tested (Duh!), btw:
- (IBAction)done {
// get the currently selected string
NSInteger row = [pickerView selectedRowInComponent:0];
NSString *selection = [dataArray objectAtIndex:row];
NSLog(@"%s: selection=%@", _func_, selection);
// set text in textBox property of parent controller
[self.parentViewController setValue:selection forKeyPath:@"textBox.text"];
[self dismissModalViewControllerAnimated:YES];
I have tried to implement this code
[self.parentViewController setValue:21 forKey:@"test"];
but it is generating an error stating
passing argument 1 of 'setValue:forKey:' makes pointer from integer without a cast
Yeah, referring to the doc, [setValue:forKey:|http://developer.apple.com/iphone/library/documentation/Cocoa /Reference/Foundation/Protocols/NSKeyValueCodingProtocol/Reference/Reference.html#//appleref/occ/instm/NSObject/setValue:forKey:] wants an id type (pointer to an object of any Obj-C class) for the first arg. Since 21 is an int, i.e. a scalar value, the compiler doesn't like it (and the runtime system would like it even less).
However when you want to use KVC to set a scalar property, the methods are actually smart enough to extract an int if you provide a NSNumber object (see "Setting Attribute Values Using Key-Value Coding" under [Key-Value Coding Fundamentals|http://developer.apple.com/iphone/library/documentation/Cocoa/Conc eptual/KeyValueCoding/Concepts/BasicPrinciples.html#//apple_ref/doc/uid/20002170 ] in the Key-Value Coding Programming Guide). So if 'test' is an int ivar of the parent controller, something like this should work:
[self.parentViewController setValue:[NSNumber numberWithInt:21] forKey:@"test"];
Does that cover your questions? Sorry again for the bad code. Most of the examples I post are pasted directly from working, tested code, and I usually add a disclaimer if it's just something I keyed into the forum. But when I"m having a senior moment all bets are off.
- Ray

How to Set arguments to PL-SQL Procedure schedule to run from OEM.

Hi All,
OEM Config Details is as follows
Oracle (R) Enterprise Manager Ver 9.2.0.1.0
I created a job which is scheduled to run a PL-SQL Procedure. The procedure should accept two arguments as follows.
BEGIN
FLSTG.PROC_DELETE_DATA (ARG1,ARG2);
END;
Arg1 is of type Varchar2 & Arg2 is of type Date
How should i set arguments for the procedure?
Can someone please help me?
Thanks in Advance.
Regards,
Vidyanand

The only problem is when writing an ODI procedure using the Oracle Technology in ODI Designer, ODI asks for the Schema.
If I do not assign a value to the schema field when I run my ODI procedure I get the error message :
java.lang.Exception: Internal error: object ConnectConnection
ColConnectId:null
ColContextCode:CTX_SRC
ColConName:null
ColIndCommit:null
ColIsolLevel:null
ColLschemaName:null
ColPlanComp:null
ColTechIntName:null
DefConnectId:null
DefContextCode:CTX_SRC
DefConName:null
DefIndCommit:null
DefIsolLevel:null
DefLschemaName:null
DefPlanComp:null
DefTechIntName:ORACLE
ExeChannel:J
IndErr:0
IndLogMethod:null
IndLogNb:null
LogLevDet:3
Nno:1
OrdTrt:0
ScenTaskNo:1
SessNo:4152001
TaskName1:Traitement
TaskName2:CNT_SRC_ALL
TaskName3:DROP COUNT_ROWS

R3load argument values for OS/DB migration from HP-UX/ORA to WINTEL/MSSQL

Greetings,
I am looking for a comprehensive list of R3load task and load argument values for both export and import.
We are using distribution monitor 1.9.1 I'm looking for possible values for the following parameters in distmon properties file.
r3load.export.taskArgs
r3load.export.loadArgs
r3load.import.taskArgs
r3load.import.loadArgs
migmonArgs
I know the typical values, but I am looking for a comprehensive list and I have not been able to find it in any documentation.
thanks,
Joe

> I know the typical values, but I am looking for a comprehensive list and I have not been able to find it in any documentation.
Yes - because there is no such list and those parameters change because R3load and lib_dbsl is continously developed; I'd check the corresponding notes.
Currently for Oracle I'd use
-loadprocedure fast -merge_bck
and for MSSQL I'd use
-loadprocedure fast -merge_bck -c 10000
plus
BCP_LOB=1 in the environment of the user running the R3load.
Also I'd set the logging to minimal and add traceflag 610 (http://msdn.microsoft.com/en-us/library/dd425070%28v=sql.100%29.aspx) - plus modifying DDLMSS.TPL to use page compression.
Markus

Error while setting a value into an UDF of type date

Hello,
i get the following error while trying to set a value to an udf with the type "date":
Exception from Server: RPC_E_SERVERFAULT
This code is used:
objDate = CDate(objLineRecordSet.Fields.Item("U_TESTDATE").Value)
objDocument.Lines.UserFields.Fields.Item("U_ACTDATE").Value = objDate '### Here comes the error
The application is in PL 29

Christian,
If you search this forum on "date UDF" you will find many posts that may assist you such as this one ...
Format of string passed to Date/Time Hour UDF
HTH,
Eddy

Problem setting initial value for LOV

Hello, everyone. This seems like it should be simple, but it's giving me lots of problems. I am trying to create my first LOV. I have a messageLovInput item called PFedFilingStatus. From the Property Inspector, I can set an Initial Value of "02", which displays when I run the page, and lets me change it and validate it using the associated LOV.
What I would rather do is set the initial value programmatically, but here are my problems:
If I set the value like this:
OAMessageLovInputBean lovText = (OAMessageLovInputBean)pageLayout.findIndexedChildRecursive("PFedFilingStatus");
lovText.setText("02");
then the field displays properly at run time, but can't be changed. The LOV runs, but any value I select flips back to "02"
If I set the value like this:
lovText.setDefaultValue("02");
then nothing seems to happen at run time. The value is not displayed at all.
Can anyone tell me what I am doing wrong? Thanks for your help.
--Dave

Yes, that helps a bunch. Now can you tell me where that is set?
Thanks so much.
--Dave

Setting the value of a single attribute for multiple line items

Hi all,
I am working on a Web Dynpro application, I have created this applicaion for an accounting document so it has header data and multiple line item data. As per the requirement I have to put the following logic:
1. When a user enters a value in the field KBLNR on the line item, all the other fields like cost centerm fund, functional area should populate from a database table based on the value of the KBLNR. to get this I have put the following code:
TYPES: BEGIN OF t_kblp,
          fipos     TYPE kblp-fipos,
          kostl     TYPE kostl,
                  END OF t_kblp.
DATA lv_kblnr TYPE wd_this->element_t_bseg-kblnr.
DATA: lt_kblp TYPE STANDARD TABLE OF t_kblp,
        wa_kblp LIKE LINE OF lt_kblp,
        lt_bseg              TYPE STANDARD TABLE OF bseg,
        wa_bseg              TYPE bseg.
DATA lo_nd_t_bseg TYPE REF TO if_wd_context_node.
DATA lo_el_t_bseg TYPE REF TO if_wd_context_element.
DATA: ls_t_bseg TYPE wd_this->element_t_bseg,
        lo_api_controller    TYPE REF TO if_wd_controller,
        lo_message_manager   TYPE REF TO if_wd_message_manager,
        lo_nd_tbseg          TYPE REF TO if_wd_context_node,
         lo_el_tbseg          TYPE REF TO if_wd_context_element,
         lt_el_tbseg          TYPE wdr_context_element_set,
         lv_bseg              TYPE bseg.
lo_nd_t_bseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
    RECEIVING
      message_manager = lo_message_manager.
lo_nd_tbseg = wd_context->path_get_node( path = `ZDATA.CHANGING.T_BSEG` ).
lt_el_tbseg = lo_nd_tbseg->get_elements( ).
LOOP AT lt_el_tbseg INTO lo_el_tbseg.
    lo_el_tbseg->get_static_attributes(
                           IMPORTING static_attributes = lv_bseg ).
IF lv_bseg-kblnr NE ' '.
      SELECT belnr
             fipos
             kostl
             PSPNR
             geber
             saknr
             fkber
             grant_nbr
             gsber
             FROM kblp
             inTO corresponding fields of wa_kblp
             WHERE belnr = lv_bseg-kblnr and
                  saknr = lv_bseg-saknr.
        ENDSELECT.
lo_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
* get element via lead selection
        lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
lo_el_tbseg->set_static_attributes(
                           EXPORTING static_attributes = wa_kblp ).
   CLEAR: lv_bseg, wa_kblp.
ENDLOOP.
everything is working fine but now the problem is couple of fields that I have in wa_kblp are with different names in bseg table and hence they are not updating... I tried putting the following logic within the loop :
lo_el_t_bseg->set_attribute(
    name = `PROJK`
value = wa_kblp-pspnr ).
but it's only setting the value of the first line item and not working for the multiple line items, can you please tell me how can do this?
Thanks,
Rajat Garg
Edited by: rajatg on Jun 24, 2011 5:09 PM

Hi Chris,
I tried your code and it worked fine but after I put this code I am getting another issue. within the loop I had a code to make the fields non modifiable on the screen and was working fine but now what's happening is it's making the all the lines uneditable except the one with data on it (which is completely opposite), this is what I have coded:
LOOP AT lt_el_tbseg INTO lo_el_tbseg.
    lo_el_tbseg->get_static_attributes(
                           IMPORTING static_attributes = lv_bseg ).
IF lv_bseg-kblnr NE ' '.
SELECT belnr
             fipos
             kostl
             PSPNR
             geber
             saknr
             fkber
             grant_nbr
             gsber
             FROM kblp
             inTO corresponding fields of wa_kblp
             WHERE belnr = lv_bseg-kblnr and
                  saknr = lv_bseg-saknr.
        ENDSELECT.
move: wa_kblp-belnr to wa_bseg-kblnr,
wa_kblp-fipos to wa_bseg-fipos,
wa_kblp-kostl to wa_bseg-kostl,
wa_kblp-pspnr to wa_bseg-projk,
wa_kblp-geber to wa_bseg-geber,
wa_kblp-saknr to wa_bseg-saknr,
wa_kblp-fkber to wa_bseg-fkber,
wa_kblp-grant_nbr to wa_bseg-grant_nbr,
wa_kblp-gsber to wa_bseg-gsber,
lv_bseg-dmbtr to wa_bseg-dmbtr.
append wa_bseg to lt_bseg.
lo_nd_edit_property = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG.EDIT_PROPERTY` ).
      get element via lead selection
      lo_el_edit_property = lo_nd_edit_property->get_element( ).
      lo_el_edit_property->set_attribute(
        name = `EDIT_FIELD`
        value = 'ABAP_TRUE' ).
      lo_el_edit_property->set_attribute(
        name = `EDIT_WBS`
        value = 'ABAP_TRUE' ).
endif.
endloop.
o_nd_t_bseg = wd_context->path_get_node( path = `ZPRELIMINARY_POSTING.CHANGING.T_BSEG` ).
get element via lead selection
        lo_el_t_bseg = lo_nd_t_bseg->get_element( ).
CALL METHOD lo_nd_t_bseg->bind_table
    EXPORTING
      new_items            = lt_bseg.
Can you please see what I am doing it wrong here....

Need help in Setting a value of an attribute

Hi,
I have a requirement where i need to set a value for an attribute in duplicate popup.
I am able to retrieve the current values with the method
o_partner->get_properties( IMPORTING es_attributes = x_attributes ).
After fetching the value, i am programatically setting
x_attributes-Soldto = 'X'.
o_partner->set_properties( exPORTING is_attributes = x_attributes ).
          lv_collection1->add( o_partner ).
          lr_core = cl_crm_bol_core=>get_instance( ).
          lr_core->modify( ).
I am not sure, what is missed out in my logic but the value is not shown on WEB UI.
Any pointers will b of gr8 help.
Thanks,
Udaya

Got the solution from other source

Set Default Value of Multi-select list item

I have a multi-select list item I want to default the value of to '%' (which is really '%null%') and have it selected. I tried setting default value of item, but it doesn't take '%null%'. I also tried a computation with a static of
:P507_ITEM := '%null%'; How do you get the default value set and selected?

Hi
Shijesh is right, you need to change your null return value and use that return value as your default. Try and use something of the same datatype as your real return values if you plan to use '%' to display all as it will make your queries simpler. eg.
Company A returns 1
Company B return 2
% returns 0
Then your query would be...
SELECT ...
FROM ...
WHERE company_id = DECODE(:P_COMPANY,1,1,2,2,0,company_id)
Hope this makes sense.
Cheers
Ben

Can af:selectOneRadio initial selection be set to values from view object?

Using JDeveloper 11.1.1.4
Hi all. I have a selectOneRadio on a data entry page which works well. Now I want to (if possible) use the selectOneRadio on an edit page--setting the choice initially to the values that were stored in a database table's record (from the data entry page). I am able to retrieve the data selected in the data entry page, but I can't find anything referencing what I want to do on the edit page. Note that my selectOneRadio objects are actually on jsff's in a region on a page. I've supplied how I designed selectOneRadio on the data entry page in hopes that someone can gleen from it and tell me how to set one up on the edit page and set its initial value to the value combination stored.
There are two columns in the data displayed (example):
Short Format / Text
Short Format / Comma Delimited
Long Format / Text
        <af:selectOneRadio value="#{bindings.Pay_File_Data_FmtVO1.inputValue}"
                           shortDesc="#{bindings.Pay_File_Data_FmtVO1.hints.tooltip}" id="sor1"
                           inlineStyle="text-align:left; font-size:2.0em;"
                           autoSubmit="true" showRequired="false" label="File Format">
          <f:selectItems value="#{bindings.Pay_File_Data_FmtVO1.items}" id="si111"/>
        </af:selectOneRadio>
public class FileTypesBean {
    String fileFormat = null;
    String dataFormat = null;
    public BindingContainer getBindings() {
        return BindingContext.getCurrent().getCurrentBindingsEntry();
    public void getFileTypesSelection(ActionEvent actionEvent) {
        fileFormat =
                (String)resolveExpression("#{bindings.Pay_File_Data_FmtVO1.attributeValue}");
        dataFormat =
                (String)resolveExpression("#{bindings.Pay_File_Data_FmtVO1.attributeValues[1]}");
        //System.out.println("dataFormat = " + dataFormat);
        // now put in ParamsBean for use
        AdfFacesContext afci = AdfFacesContext.getCurrentInstance();
        ParamsBean params =(ParamsBean)afci.getPageFlowScope().get("paramsBean") ;
        params.setFileTypeParam(fileFormat);
        params.setFileDataTypeParam(dataFormat);
    public Object resolveExpression(String el) {
        FacesContext facesContext = FacesContext.getCurrentInstance();
        ELContext elContext = facesContext.getELContext();
        ExpressionFactory expressionFactory =
            facesContext.getApplication().getExpressionFactory();
        ValueExpression valueExp =
            expressionFactory.createValueExpression(elContext, el,
                                                    Object.class);
        return valueExp.getValue(elContext);
}Thanks in advance,
Troy
Edited by: Hoopestr on Apr 18, 2012 10:54 AM

in the amimpl have an edit method, get the value you want to set and set that value for your af:selectOneRadio, row.setAttribute(PayFileDataFmtVO1, value);

To set a value in matrix cell which is linked

In sales order if I enter form no of TAX TAB as "form c" , each cell of the TAX Code column of the matrix of contents tab should be set the value as "CST". I have tried to set the value, but it is showing "Form item not editable". I have tried to make the cell as editable but still the error message is coming and it is not setting the defined value. How can this be solved?
Thankx in advance

Hi Priya Manoj
Some notes you can find on this [Thread: Set Value in Itemcode in Purchase Order Form|Set Value in Itemcode in Purchase Order Form;.
There are I has posted some examples in vbcode.
Hope the notes can help you.
Regards
Sierdna S.
Edited by: Sierdna S on Oct 22, 2008 9:45 AM

How do I set the value of a dynamic row text field

I have a repeated row form which contains a button and multiple text fields. There is a text field (Input Data Field) further up with some information I want to place in the table and multiple buttons that I want to read the value of and set to the table. I apologize there are multiple questions I have and I am using pseudocode to describe it.
Top form looks like
InputField
| ButtonX1 | ButtonY1 | DescriptionX1 (read only Text Field)
| ButtonXn | ButtonY1 | DescriptionXn
OutputRow looks like
| ButtonOutput | OutputField1 | OutputField2 | OutputField3 |
So I would like it to do
ButtonX1.click
OutputTable.OutputRow.addInstance(true) //this works - everything else I have questions on
OutputTable.OutputRow.OutputField1.rawValue = DescriptionX1.rawValue
Question 1
How do I address the location in each table to set a value
Question 2
How do I get the value of the description field in the same table and row as the button
I would like to say something to the effect of OutputTable.OutputRow[??].OutputField1.rawValue = this.parent.DescriptionX
OutputTable.OutputRow.OutputField2 = InputField.rawValue
Same question as above - how do I specify a dynamic row - is this the proper syntax for getting the value from the input field?
OutputTable.OutputRow.OutputField3 = this.ButtonLabel
Question 3
How can I get the value of the button's label to set in the field
There should be very many of these buttons and buttons will be added - I would prefer to set the value based on the button's label to make the value easier - not requiring changing the code
Question 4 - unrelated to those above.
Is it possible to build the first table
| ButtonX | ButtonY | Description |
from an XML File. I have seen examples of how to build if it is just data, but can the XML be pushed into a form with code to do the above actions?

Each object in a form must have a unique name. I doing so it is not neccessarily the name but the path or SomExpression associated with that object that must be unique. In your case you have a Table.Row.object configuration. The Row is the part that is repeating so to give each object a unique name an instance number is placed on the repeating part. So objects in the 1st row woudl be Table.Row[0].object...objects in the second row woudl be Table.Row[1].object etc .....You can see this by adding a debug instruction on the Enter event of the description field. Put the code app.alert(this.somExpression) and when you enter the field you will see what the somExpression is. Do this for a few rows and you will see the pattern (don't forget to remove the debug code from the enter event). Now you know what you have to use to address the fields. If no instance is given it is assumed to be 0 ..that is why only the 1st row is being affected.
So now to answer your questions:
Question1: The square bracket notation is an issue for javascript (this is the notation for an array) so we have to use a different means of addressing the field to include the instance number. So to address the Description in the 3rd row we woudl use:
xfa.resolveNode("Table.Row[2].Description").rawValue = "This is my new description";
Note that the instance number is 2 for the 3rd row because the instance numbers are 0 based.
Question2. The resolveNode notation allows you to pass a string so you can also concatinate expressions to make the string. If you are writing code on a button in the same row you can get the instance that you are on by using the expression this.parent.index. The "this" portion refers to the current object (the button) and the parent.index gets you th eindex of the Buttons parent. If the button is embedded deeper in a hierarchy then you can continue to add parent indicators until you get back to the node that you want. So rewriting your expression from Q1 it woudl be:
xfa.resolveNode("Table.Row[" + this.parent.index + "].Description").rawValue = "This is my new description";
Question3: The buttons caption can be retrieved by using ButtonName.caption.value.text.value
Question4: When you say build from an XML file. What are you expecting to come from the XML file? The caption that goes on the button? Typically the XML file carries data (not to say that it cannot carry other things). Just need a bit of clarification on this one first.
Hope that helps
Paul

How to set multiple values in one context-attribute

Hi all,
Anybody knows a possibility to set multiple Values to a context-attribute?
I know it how to get it with the following code:
String break[]= request.getParameterValues("break");
Now I want to do something like:
request.setParameterValues(break[no]);
where no is a counter in a loop.
With the Method setAttribute(), I overwrite the previous inserted value.
Thanx
Robert

I have not explizit declared break as an array.
It is the Context- Attribute I want to send. I thaught that I can use it as an array in the same way I can do it when I send Data from an HTML- Form (with multiple values) to an servlet.
I don't know how to declare the Attribute explizit as an array.
that it is you wanted to know?
I think my main problem is to get an array from the servlet to the jsp. Is there an other possibility (other than via Context-Attributes) to do that?
thanx
robert

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

Set argument value

Similar Messages

Maybe you are looking for