Set backgroung image for report

Post Author: Hamid
CA Forum: General
Hai all,is there any way to set background image for report?in my report there is some lines and i want to set image back of themmany thanks

Post Author: synapsevampire
CA Forum: General
Sorry, the service went crazy there.
Right click the poage header and select insert section below.
Place the imnage in the lower page header (B probably), and then right click the page header b and select format section (section expert) and select the underlay following sections.
This will give you an idea of the underlay following sections use, then in future posts try including your software version and technical infomation.
-k

Similar Messages

Setting background image for repeating frame in .pdf report

Is it possible to set a background image for a repeating frame, and more specifically for a repeating frame rendered in .pdf?
I do not see any standard property in the navigator for images of any sort and the documentation touches only on setting background images for graphs, which is not the intent in my case. I -did- add an HTML table property background="myimage.jpg" but the report is ultimately generated in .pdf format and I was not surprised to see that the image was not rendered.
Does anyone know if setting a background image as described is even possible, and if so, how? A second but less optimum solution would be setting the image as the background for all report pages, again in .pdf.
Many thanks.

Hi Raj,
Yes you can have an image in the background. Thats possible if you are using XML forms as an iview or ivew dev in WebDynpro...
Also check this [link|regarding background color change in iview]
Regards,
Piyush
Reward points if this helps!!!

How to dynamically set connection string for report in C# code?

Hi,
I have installed CRVS2010. I have created new Crystal Report WPF Application and new report. I would like to set connection string for report in code dynamically.
Is this possible?
Thanks
Ivana

Lots of posts in this forum on how to set database connections. WPF should not be a consideration as it's just a viewer. The report engine is still the same. Search these forums. Use the search box at the top right corner of this page. Look at samples here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Note that none of the samples above are using WPF, but like I said, the WPF is just a different viewer and will not impact how the report engine logs on to a database. (I think of it as a gray car vs. a red car. Same engine, just the color is different)
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Do we have any option to set time limit for report execution

Hi Experts,
Please Could any one clarify is there atime limit to set for report execution and if it crosses the limit it wud not display a data,
Thanks in advance
Nitya

Hi,
Basis should be help you in timeout settings on various cases. Time out setting while execution from portal is there.
Regards,
Akshay

Setting Default Variant for Report Trans

Hi All,
Is there a way to set a default Variant to a reporting transaction? for example for ME2N how do I set a default Variant to be imported to the selection screen automatically once the report transaction is called?
This is useful if the user uses the same variant all the time.
Thanks in advance!

Pls try the below example
I give you one example,
Enter t-code ME2N, Then click on Dynamic field selection button.
Then double click on created by field enter enter any user id in it.
Then click on save button.After click on this screen your can see one other screen for variant.
Here you have to assign variant name and meaning. You can also change field status for report with help of this screen.
Before click on save button, tick on protect check box button and then click on save.
Then exit from transaction and enter ME2N.
Click on Get variant button. Here you can see list of variant, select your variant and get report as per your requirement.
by
Rajj

Freezing a set of images - For protection again any future changes

Hi,
my workflow looks often like this: I import a set of images in a folder like "TODO-xxxxx", then I edit them, and when I finished all editing, I rename the folder to e.g. "Finished-xxxxx".
Now I would like to prevent any changes to these images. So I would like to have a facility in LR which freezes these images. And I would like to see a visual hint (icon or something like this) so I can easily see what is frozen and what not.
Additionally it would be a good thing if the frozen image files are also set to read-only on the OS file system.
Thanks.
Regards,
Manfred

John,
As much as I don't appreciate you putting me down, you have raised a good point about the value of a plugin for "rescueing" this Lightroom shortcoming:
Please just ignore if you are tired of me going on... This part aimed more at Manfred and other on-lookers than John:
I used to make inadvertent edits far more often than I do now - mostly just by being especially careful, especially with auto-sync.
And, when I made these edits by mistake, it was difficult-to-impossible to tell where I was before, in order to get back. What's changed since then is the 'Export {date}' item added to the history list - which is a godsend IMO. Since I always export after finishing edits, it is easy to see, when looking at an individual photograph if inadvertent edits have been made, and I simply click on the last 'Export {Date}' item to restore.
If the 'Export {Date}' item had not been added to the history list, I would have written this plugin in short order.
If your workflow does not include promptly exporting after finished editing, another thing you can do is make a snapshot called something like: "Finished...", then you can see if edits have been made after this snapshot was taken...
Granted, this only allows you to see whether an inadvertent edit has been made when viewing a single photo in develop mode. Where a plugin could still provide some added value is in being able to see in library mode, and being able to filter/collect photos with inadvertent edits. And also assuring that even if they get written to the catalog, they are never written to xmp/dng (or at least not without a prompt).
Worth an Lr3 plugin, until we see what Lr4 brings, me-thinks... Gimme a "minute"......
Rob

How to set TOC Image for "Import HTML articles"?

For "Import HTML articles", I set TOC Image (70 x 70 px, PNG) on Folio Builder.
But at Adobe Content Viewer on iPad, TOC Image doesn't appear.
I confirmed on Dashboard, TOC Image for "Import HTML articles" appears correctly.

According to the Page 56, 57, 61 of digitalpubsuite_help.pdf (Last updated 10/4/2011) ,
"Change article properties" shows how to change TOC preview.
I changed the TOC previews of some Stacks and the viewer table contents on iPad shows the TOC previews I expected.
But for the HTML Stack (Import HTML article), the viewer table contents on iPad shows the thumbnail of HTML content (not the TOC previews).
I confirmed on TOC Preview of Folio Builder and Dashboard of DPS,
TOC preview for "Import HTML articles" appears correctly.
What am I wrong?

Set default image for no image found

Hi Folks,
I have a folder full of images and when en images is called form that directory and not found I would like the default image to show up.
I have added an HTAccess file with this content:
ErrorDocument 404 default.jpg
And added a default.jpg image in the directory.
I have used this approach successfully on a few other sites but in this instance when I open a page with a missing photo I still get the standard ugly missing image icon. However, if I open that image in a new tab I get a page with the text 'default.jpg' on it.
NOt sure why that happens but I guess it's something about it being a different hosting set up. Perhaps there is another way to do this that will work on this set up.
Anyone got an idea how I can fix it?
Cheers
Dave

If I remember well, in the Report Attributes, you should select the linked column. At the link image, there are 2 edit images(the default is the big one), but there is one more image which is smaller.
Hope it helps.

How 2 Set the logic for report 2 run 1st of everymonth......

Hi Experts,
i ve developd a HR-ABAP report in that Some part of code will Mon-Fri, Excluding Public holidays and sat & sundays...( i.e no public holidays and no sat & sundays)
and some part of should Run on 1st of everymonth.... but 2 parts of code should be in same report..
How can set the logic to run the report respective times....
Thanks in Advance....
sudeer.

you can code this but need some good expertise on fm's , date handling techniques and subroutine call coding.
1.
to make the code run only on 1st of every month
capture the rundate of ur prog .. take value of sy-datum
ex.. 01.xx.yyyy
or date std will be yyyymmdd so check for dd = 01 ..
so per logic first two chars show that its first of any month in any year ..
if yes
execute the logic for the first of every month ..
endif.
2.
where the code needs to be run on mon-fri and not on public holidays / sun / sat ..
first fetch the day based on date .. like mon or tue or wed .. except sat and sun..
second check whether if m-t-w-th-fr if any of them is a holiday or not
u need to check the date in the calender list like tholi thoc and .. to check whether that is a holiday or not ..
coming to sat and sundays .. u need to check the day for date using function modules and build the logic ...
br,
vijay..

How to set Logo Image for each Project Site Seperately in project server 2010.

Hi,
I want different logo images to be set for each Project Site of different project Separately in Project server 2010.
Scenario is, we have different Project of different client , each client want different logo for their respective Projects.
How to accomplish this task?
Please Help me.
Thanks

Hello. Store the logo somewhere accessible, either in a library at the PWA site collection or on the project site, make a note of the URL to the site then navigate to the project site and depending on what logo you want to update you can click Site Actions
> Site Settings > title and description then update the image URL there. Alternatively, on the homepage of the project site add an image web part then reference the new logo using the URL. Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Setting preview images for retina mac book pro?

I love the new retina mac book pro.
I have set the screen size to a higher resolution howver I was hoping that when I press spacebar to preview my images in finder that I can enlarge to a certain size. Most of the images are very small, and I have to drag manually to the right size even though it is slightly blurred.
Is there a script I can add so that the window size is set at a certain size so theres no relation to the actual pixel?

Hello Shashank
What patchlevel of the 7.30 gui are you using?
Please try the latest hotfix 1 of patch 8.
If you drag the resize icon (Bottom right of the saplogon) does the screen display correctly?
Remember, the saplogon is designed for a minimal screensize of 800x600 which is still
used.
Jude

Setting Preview Image for iMovie

I just created several tutorial videos using iMovie. The videos are embedded in an online course I'm developing. Does anyone know how to set the preview image that appears for the video?
Right now, the preview image (i.e. the image that appeard under the "play icon" for the video before the video is clicked on) is just a black image. I believe the player that I'm using defaults to the first frame of the video, which is a black screen. Is there a way to change this? Our tech folks said the preview image is a setting within the video, not the player.
Thanks for your help.

Have a look at this tutorial: http://web.archive.org/web/20081012122149/http://www.monkeyflash.com/flash/poster_frame_fo r_flash_video/
If you still have questions, ask again.

Setting background images for transparent terminals

Of the various terminal emulators I've tried (aterm, urxvt, terminal) none of them function properly with regard to transparency if the background is set with imagemagick.
display -window root <image>
Terminal and aterm do not show through to the background image at all. While urxvt does become transparent, none of the tinting options show any effect.
This is not a huge issue. There are of course many other programs that can be used to set a background image. When using feh for example, all of the afore mentioned terminal emulators seem to handle transparency as expected.
feh --bg-scale <image>
However, if both methods of setting the background are used at the same time with different images, then the terminal emulators will show through to the background image that was placed with feh, while the actual desktop background is that of the image set by imagemagick. So the images are effectively placed on different layers.
There was a forum thread that hinted at this before, but there was never any resolution to it. Is this behavior a bug or a "feature"? With which program?
And if it makes any difference I've tried this in both openbox and ion3. Same results.

derelict wrote:There was a forum thread that hinted at this before, but there was never any resolution to it. Is this behavior a bug or a "feature"? With which program?
It's a bug with the apps that set the background which use the "old way" of doing it. Apps like feh use the "newer approach" which allows things such as aterm to detect the real image and use it for pseudo-transparency.

Set Table Location for Reports(Command Objects)

Hi SAP Gems,
I would like to thank TED,Merry,Jonathan, Shawn, and all the developers contributing to this community.
I would really appreciate any help on following question:
1. I have a report designed in CR 2008 against DB2(JDBC Connectivity).
2. The report is working fine in the designer.
3. There are five sub reports in the main report.
4. The main report doesnt have any command object however every child/sub report has command object with paramaters.
5. Every subreport is linked.
6. I would like to change runtime datasource location for this report using CRJ 2.0 SDK'S.( from AIX to Windows BOX)
7. Both BOX's have same database schema.
8. I am able to view the report in the jsp page using SDK's, however "set table location doesnt works and prompts me the error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Unexpected database connector error---- Error code:-2147467259 Error code name:failed
*There is no problem with the code because the sample code is taken from sdn.sap as it is and it works for other report without subreport and command objects.
I tried using the following code piece but again same problem.
if(table instanceof com.crystaldecisions.sdk.occa.report.data.CommandTable)
                    IProcedure command = (IProcedure)table;
                    ParameterField commandParam = (ParameterField) command.getParameters().get(0);
                    Values values = new Values();
                    ParameterFieldDiscreteValue pfdv = new ParameterFieldDiscreteValue();
                    pfdv.setValue("ANTON");
                    values.add(pfdv);
                    commandParam.setCurrentValues(values);
I would like to know if I dont want to set the command level param using:
ParameterField commandParam = (ParameterField) command.getParameters().get(0);
                    Values values = new Values();
                    ParameterFieldDiscreteValue pfdv = new ParameterFieldDiscreteValue();
                    pfdv.setValue("ANTON");
                    values.add(pfdv);
                    commandParam.setCurrentValues(values);
would the parameter would be prompted automatically?
how do I find what paramaeter to set and how ?
Regards,
Jonathan Roy

Hi ,
Can any one help please?
Ted !! I would really appreciate an answer from you.
Regards,
Jon

HTAccess - set default image for missing image

Hi Folks,
I have a folder full of images and when en images is called form that directory and not found I would like the default image to show up.
I have added an HTAccess file with this content:
ErrorDocument 404 default.jpg
And added a default.jpg image in the directory.
I have used this approach successfully on a few other sites but in this instance when I open a page with a missing photo I still get the standard ugly missing image icon. However, if I open that image in a new tab I get a page with the text 'default.jpg' on it.
Anyone got an idea how I can fix it?
Cheers
Dave

If I remember well, in the Report Attributes, you should select the linked column. At the link image, there are 2 edit images(the default is the big one), but there is one more image which is smaller.
Hope it helps.

Set backgroung image for report

Similar Messages

Maybe you are looking for