Set BPM of each track?

Hi, for the last couple of years, I've been using Sony Acid on my PC to mix multiple tracks to make blends and remixes of songs. I've just switched to a MacBook, and tried to get Garage Band to do the same. But I wasn't able to set the BPM of each track individually so they will all play at the same BPM when mixed. I was wondering if Logic Pro has similar features to Sony Acid. If not, can anyone recommend another program to Mac that is. Any help would be great. Thanks in advance.

Check out the 'Elastic Time' videos;
http://www.digidesign.com/index.cfm?navid=199&itemid=27606&langid=100
May be more what you're looking for.

Similar Messages

GarageBand - How to set different BPM for each track?

Hi, for the last couple of years, I've been using Sony Acid on my PC to mix multiple tracks to make blends and remixes of songs. I've just switched of the a MacBook, and am trying to get Garage Band to do the same. I'm curious whether or not I can set the BPM of each track individually so they will all play at the same BPM when mixed. I'm only able to find the master BPM that changes the entire BPM. Any help would be great. Thanks in advance.

Well, as far as I can see you don't really want different BPMs on each track, but you want all tracks to have the same tempo - only you want to make the tracks fit that tempo.
You could do that in GB by first bringing each of the tracks to the desired tempo, then export it and re-import it. (There's some other ways to do it, but they all involve some fiddling around and maybe some math.*)
Logic offers a nice feature where you can shorten and lengthen a region just by dragging it out. That could be used for the purpose you're trying to achieve.
*For example: Determine the BPM of each of the tracks. Set the project's tempo to the BPM of track A. Import track A, turn it purple so it follows the tempo. Then set the project to project B's tempo, import it, etc. You will end up with all tracks in the same tempo, and you can still make the whole project go faster or slower.

I'm mixing tracks together and can't work out where the volume and BPM control for each Track is located

Which Table would be the best for mixing tracks together? I've been off the game for a bit and have forgotten, but last time i made a good mix tape from the New project table....
Where do i go to match up the BPM for each track i lay to match up?
How do i get the Volume line to pop up on each track so i can fade accordingly?
Thank you to those who can help out

The correct way to target instances m1 thru m10 using bracket notation would be...
this["m"+i]
or even more correctly...
this["m"+String(i)]

Having connected my new iPhone 6 to itunes and setting it up as normal... i transferred music to it as normal but when i open the music app and select a playlist it has a download cloud next to each track...

After connecting my new iPhone 6 to iTunes, i transferred my music as i always have done. After opening the music app and selecting a playlist there is a download cloud next to each track... this is also the case with each podcast. Also once i reconnect the phone to iTunes go to add another playlist, at the top the "sync music" check tick has disappeared. when i re check that box again it says "Do you want to sync this iPhone all data will be erased"
can anyone help at all?
Thank you

Hello henryscott3,
Thanks for using Apple Support Communities.
From your post it appears that you either have iTunes Match on your iPhone, or are seeing items that are available in iTunes in the Cloud and not on your device. To learn more about both of these features, please see the articles below.
iTunes Store: Subscribing to iTunes Match
iCloud: Content everywhere
Take care,
Alex H.

Exporting multiple video tracks as 1 file with different effects on each track.

I am currently trying to export 3 video tracks as 1 mp4.
Each track has exactly the same footage, but with different effects to achieve a certain aesthetic.
When I view the sequence it in premiere all 3 tracks are displayed correclty.
The exported version appears to only export the uppermost track, track 3.
Track 2 and 3 have opacity set to 47%.
Track 1 opacity is set to 100%.
I have tried exporting a test project that has multiple layers and there was no problem.
I have NOT tried exporting a test project with exactly the same opacities and effects, as it's a bit time consuming. I will do so if I can't get a stisafctory solution from the forums.
The problem, I believe, is down to the layering of effects. In this case on track 3 I have procamp, which is boosting the red in 1 layer. This is the image I get once the final piece is exported - track 3's.
So..
How do I get the effects of each layer to show properly in the export?
and
Why is the exported version missing tracks (or the effects of tracks) 1 and 2?

You didn't answer probably the most important question: whether you're using hardware or software Mercury Playback Engine (MPE). However, since you've set Maximum Render Quality on, it's largely irrelevant.
When you're using hardware MPE or have the MRQ flag set for your export, rendering is performed with linear color. Linear color processing affects how color channels and alpha channels are composited--anything less than 100% opacity is subject to linear color processing. Check out this article for more information on linear color/linear light: Linear Light - Artbeats
Since it sounds like you're seeing the results you expect in the Program Monitor, but not export, I'll wager you're not using hardware MPE. Only by disabling the Maximum Render Quality flag on export will you be able to get results that match what you see in the Program Monitor (within reason, of course). The only way you could see the effects of linear color within Premiere would be to either use a qualified GPU that enables hardware MPE, or go into your Sequence Settings and check the "Maximum Render Quality" option and then render previews.
Please let me know if that helps resolve the issue, or at least provide a little insight into the problem.

Ipod stops after each track ends in a playlist?

I have a problem: Suddenly, my ipod stops after each track ends in a playlist. This happens with every playlist and every track, all of which worked fine until this week. All tracks' settings are "yes" on 1) part of a compilation; 2) remember playback position and; 3) skip when shuffling. I have not updated any software or added any new content to my ipod. I imagine that some setting has been switched on or off, but I am unable to identify which one. Please help as these are my audio books! Thanks!
nano 6th gen

Yilofall wrote:
I have an iPod Classic (I am fairly new to the medium) and when playing music the Pod goes smoothly from one song to the next but, when listening to a book (brought in from a CD copied into iTunes) it plays one track and stops.
See below for a link on how to copy a CD into iTunes if you want an Audibook.
I have tried checking the gap less album box (what is that for by the way) but it makes no difference.
If you've heard of Dark Side of The Moon by Pink Floyd then it's used there when you want no break between tracks. Or any DJ mixed continuos play CD. Or some classical music. Take your pick
Third question, can I make a book copied into iTunes an Audiobook? How?
[How to Import Audio CD audiobooks into iTunes|http://aldoblog.com/audiobooks/itunes/importing-audio-cds>
Thank you!
No problem, hang around and read a few posts, there's always plenty to learn in here.
Regards,
Colin R.

In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

In Logic 9, is there any way of editing the take folders of, say, 7 different drum tracks at the same time, so that each track has the same changes applied to its takes?

scottiewade wrote:
Thanks. I know how to select multiple tracks in the mixer, did that and put on group clutch,
Hi
Wrong..
To assign tracks to a group, click in the dark gray box just above the automation (Read/Write/Off etc) on a channel strip, and select the group number you wish to use. The first tim eyou assign a group, the Group Setting swindow will appear automatically, thereafter you need to click on the group area and choose 'Open Group Settings'.
Make sure that you have turned off Group Clutch (this disables all Groups)
Maybe this will help
http://support.apple.com/kb/VI248
CCT

Itunes keeps cutting off the last few seconds of each track!

Help!
I'm trying to import from a CD, and for some (but not all) of the tracks being imported, when I go to play them from my Library, itunes skips the last few seconds of the song and jumps to the next one. Usually it wouldn't be a problem, because most tracks on CDs have some dead time at the end, but for these you are supposed to go directly from one track to another - without down time in between or skipping any of the track (one song is spread out over several tracks).
I've tried re-importing the tracks using both the AAC encoder and MP3 encoder, specifying the the track end at a particular time (stop time - this information shows up when I "get info" on the track, under options) and the track length in my library shows up as that exact time from the CD. itunes just doesn't play the full length of the track!
How do I get itunes to play each track to the very end before jumping to the next one?
Jen

and the track length in my library shows up as that exact time from the CD
iTunes should play the full track. Did you tick the 'Crossfade playback' checkbox in Preferences>Playback? If so, uncheck it.
If the problem persists you can check if it's an inporting problem or an iTunes setting problem by doing this:
In iTunes select a 'problemtrack'.
Choose 'Show Song File' from the File menu (command-R).
Select the file and control-click on it.
Choose 'Open With' and select 'Quicktime Player' as the program to open the file with.
Now play the 'problemtrack' in Quicktime Player to the end and see if it still skips the last seconds.
If it plays the full track, your imports are OK.
Hope this helps.
M

How 2 Import a CD into Itunes? I only get first few Secs of each track!!

I have just bought an Ipod and am having trouble importing my Cds into Itunes !!!
I seem to have the 'intro function' on in Itunes so I can only get the first few seconds of each track !!
Does anyone know how I can import the complete tracks and how I turn this Itunes intro setting off ?
Thanks Owen0069

hi Owen!
let's try checking up on some of the simpler possibilities:
You can't import or play music from an audio CD in iTunes for Windows
these resources might be helpful with that:
Updating the drivers on your Windows PC
toonz: Where to find firmware for your CD/DVD drive
... but if no joy, post back with your itunes "help > run CD diagnostics". one of the clever folk might be able to spot something in those.
love, b

I've purchased several comedy albums on itunes and they're sent to my music file, which I don't like since I like to shuffle all songs. I put the albums in audiobooks but each track is listed seprately instead of by album. Is there a way to fix that?

I've purchased several comedy albums on itunes (or uploaded from my cd collection) and itunes stores them in the music file. I prefer not to have them stored there since I often put my ipod on shuffle all songs and I hate having comedy bits pop up. So I went into "get info" of each track and changed it from music to audiobooks. That transfered everything into audiobooks but when I synched my ipod, I realized that the comedy tracks are all listed individually instead of under their albums. This doesn't work obviously since I want to listen to the album as a whole. I was wondering if there's a way to store my comedy albums in my audiobooks but have them stay in album format. Can anyone help me on this?

Try posting in a more appropriate forum, as this has noting to do with itunes U - the place where University/college/museums post education material.

I want to have each track in an album have individual artwork, but have a different picture for the entire album thumbnail. How can I do this? At the very leasr, how can I choose which picture is the thumbnail, because it just picks one at random?

I have an album that comes with indivisual artwork for each track. I would like to have each track have its own artwork, but still have the entire album have the real album cover. So when I'm looking at the album's section on iTunes or my iPhone I see the album cover, but when I select an indivual track to play from that album I see the individual track artwork. I can't figure out how to do this.

Right-click the track in your iTunes library, Get Info, and open the Artwork tab. You can paste in the artwork for that individual track.

Is it possible to make an album, with seperate, and different artwork for each track? Thanks.

Got a few tracks and I was wondering if its possible to make like an album, but each track different art?

You can give each track its own artwork. iTunes will normally display the artwork of track 1 in album listings. The individual track art will show in the small window at the top of the screen when playing, or the artwork panel of the mini player, or the now playing window on a device. Try it and see.
tt2

Can You Get iPod To Stop/Pause At The End Of Each Track

I really need my iPod to stop/pause at the end of each track/song, but it insists on playing right through a playlist one song after another. Does anybody know if there is a way of achieving this, there doesn't seem to be anything in the manuals about this. My iPod is new and is the 60GB color screen model. Any help would be much appreciated.
Thanks, Peter.

Hi boaster, is this an apple accessory, or where else will I find one? When you say there will be some manual intervention, I presume you have to press the button to actually stop it at the end of each track??
Dave W. I've tried your suggestion and it works fine. Its also good because it keeps iPod within the correct playlist. The original suggestion of one track per playlist also works, but unfortuanatly iPod defaults to go back to the main menu at the end of every playlist so you then have to navigate back to where you need to be. Dave, it looks like your suggestion is the answer at the moment, many thanks, although would like to know more about this 'airclick' remote please. Cheers.

TS3376 I had my iphone set up to be tracked as registered with iCloud and it had been using it for a year one day it said no devices registered and stopped working why???

I had my iphone set up to be tracked as registered with iCloud and it had been using it for a year today it said no devices registered and stopped working even though i tracked the selected iphone 4 device an hour earlier why did it do this???

So basically the phone I was tracking was working an hour earlier it had no signal at times when it did pick up a signal it located it easily but an hour later the message came up no devices registered when my friend returned home I Checked the device I was tracking to make sure find my iphone was on but it was off and my friend didnt turn it off so my question is why did it turn itself off???
Confused?

How to select a whole album to play without selecting each track individually in iTunes 12.1.2 for Mac book pro OS 10.9.5

The only way that I am able to play a whole album is to select each track to play up next. This extremely tedious. There must be some way to select the whole album to play.

Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry

Set BPM of each track?

Similar Messages

Maybe you are looking for