"Set canvas" to the marqueed area instead of "crop"?

Is there a way to "set canvas" to the marqueed area without doing any math or losing the unseen areas like you would with "crop"? I can't find anything like that in the pulldown menus. If not, I'd like to put that on the Photoshop wish list.

You can't.  But (there's always a but) if you have enough room (i.e. playing time) available in the project you can create a slideshow in iDVD
and add all of the videos to it.
If you do that set the Slide Duration time to anything except Manual or Set to Music.  Also do not select an transition.
When you click on the Create Project button in Magic Movie you'll be able to use the "+" button to add the slideshow to the top menu. 
OT

Similar Messages

  • I have loaded firefox 4, and every time I open a new tab the curser ends up in the navigation area instead of the search box - very frustrating. It didn't used to happen.

    cursor in search bar not in main page. Causes irritation when I start typing before I realis.
    Problem not experienced in Firefox 3 (now running 4)

    If you want a specific webpage (like the Google page) to always open when you open a New Tab, you can use the following add-on to Open New Tabs with your Favorite Pages:
    -> NewTabURL 2.2.3
    * https://addons.mozilla.org/en-US/firefox/addon/newtaburl/
    * NewTabURL will not work until you set the page that you want to open in the Options for it.
    * click Add-ons > Extensions, click Options next to NewTabURL.
    Check and tell if its working.
    Not related to your problem but do the following:
    -> Update Firefox to the latest version 10
    * [[Installing Firefox on Windows]]
    -> Update All your Firefox Plugins -> https://www.mozilla.org/en-US/plugincheck/
    * '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

  • My yahoo will no longer open and I tried adjusting settings and it is worse. Please help. When I log on, in the loading area, instead of the circling symbol, it continues to load numbers, symbols, letters and does not stop.

    On Tuesday, I downloaded 4.0 Firefox as Yahoo recommended. After that, every time I tried to log onto Yahoo, the above problem started. I went in and removed 4.0 to the earlier version. It still does not work.
    I am receiving messages through my husbands yahoo account but cannot turn off the computer to let it restart as I am concerned HIS will somehow be effected and he needs his for work purposes.
    What do I need to do? I have gone in and looked at cookies, systems, etc and may have jimmied something along the way.
    Thanks and I await your response.
    Trish

    On Tuesday, I downloaded 4.0 Firefox as Yahoo recommended. After that, every time I tried to log onto Yahoo, the above problem started. I went in and removed 4.0 to the earlier version. It still does not work.
    I am receiving messages through my husbands yahoo account but cannot turn off the computer to let it restart as I am concerned HIS will somehow be effected and he needs his for work purposes.
    What do I need to do? I have gone in and looked at cookies, systems, etc and may have jimmied something along the way.
    Thanks and I await your response.
    Trish

  • My iphone 4 is totally out of memory. I have almost 900 photos on there that I want to save. I have icloud set up but the photos are not backing up. Help!!!

    No memory, photos not on icloud?

    See: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

  • The colour picker is selecting the background colour instead of the foreground colour.

    You know how when you're painting, you can hold ALT and it will pick a colour from the canvas? Well, for some reason, mine still picks up the colour but it sets it to the background colour instead of the foreground colour. And when I actually select the colour picker tool, it will only select the background colour but when I hold Alt, it selects the foreground colour. Basically it's flipped where it's supposed to select. Do you know how to flip it back? It's driving me mad. Thanks.

    In the Color Palette (Window>Color) click on the foreground swatch. A "focus ring" will appear around it.

  • Opening KM links in content area instead of new window?

    Hi,
    We're having problems with the Resource Renderer option: Target Window Type which we - according to SAP's official documentation - need to set to self for KM links to open in the content area instead of popping up in a new window. However, this does not seem to work.
    Tried looking through the already existing threads of the forum and there are several older threads concerning the issue but no solution (that I could find, anyway).
    Any suggestions? We're on 7.01, SP 6.
    Kind regards,
    Rasmus
    A short update: The parameter actually works when setting it for the ressource renderer of one of SAP's standard layout-sets, for instance 'AdminExplorer', but it only works for layout-sets including both a tree view and a folder view navigation (and in this case only for the folder view navigation). I cannot seem to get it to work on simple lists! It seems that the Layout Controller defined on the layout-set has control over the "Target Window Type" parameter...
    But I still need it for simple lists. HELP.
    Edited by: Rasmus Røjkjær Ørtoft on Oct 15, 2010 4:38 PM

    Hi Rasmus
    I haven't tried to develop a new layout controller, but as I recall the layout controller only controls the areas you divide your collections into. I don't think is has anything to do with the rendering of documents (and navigation). But perhaps the different areas of a layout controller can be referenced.
    I would investigate the following:
    1)
    You could consider developing a property renderer (and reference that in the displayed properties of the collection renderer) that opens the document in the content window. If navigation is controlled by portal events, the back button in the browser will not work, thus disrupting the user experience.
    2)
    Examine the AdminExplorer layoutset to see how it works, and see if the coding can be transferred to your need. You will need a developer for this task.
    Best regards,
    Martin Søgaard

  • When i leave my computer alone for a while and i'm signed into ichat, instead of it putting me to away like the settings are set to it just signs me off...how do i fix it? i want it to stay logged on until i sign out

    when i leave my computer alone for a while and i'm signed into ichat, instead of it putting me to away like the settings are set to it just signs me off...how do i fix it? i want it to stay logged on until i sign out

    Hi,
    This is mostly about what is called Away as a Status and setting an Away Status Message when going Idle.
    Idle happens when there has been no Keyboard or Mouse  input for 10 mins.
    (read as for any Input device like Trackpad, Graphics pad, Trackball etc)
    The Bottom section of the General Section of the iChat Preferences is abouut what happens when you go Idle.  (The Orange Arrow and Text in the pic Below)
    (Your Status indicator will go Amber)
    Some of this does depend if you have Set "Block others for Seeing me as Idle " in the Accounts section > Account Info Tab on AIM Logins.
    It is also linked to Fast User Switching (your Mac User Account could go Idle whilst you are Logged in as another Mac User Account).
    The Blue Arrow and Text points out you can make sure iChat stays at the Last Status (And Message) you used on Quit (The default is for this to be Ticked and iChat to  change to Available).
    The Red Arrow and Text is about whether you appear as Fully Off line on Quit and Sleep.
    On Quit iChat does not fully log you out of the AIM Servers.
    You will appear as Off Line to your Buddies but the AIM servers will keep Off Line Messages for you (well, if you have never replied "NO" to the first Off Line IM you ever got)
    However it does seem that in certain Combos of these settings that you can "Seen" by your Buddies as Away rather than Off line.
    Picture of General Section of Preferences
    If you add in to this mix a shorter time than the Idle time to make the  computer go to Sleep then you can also create other "states"  as well.
    So...
    In it's default settings:-
    1) iChat will always set you to Available on Launch.
    2) At 10 mins of no input you will go Idle (Amber)
    3) For Fast User Switching you can set iChat to go Off Line or to Go "Away" (A Status Message setting).
    (It has been so long I forget what the Default was)
    4) iChat is set by default to show you going Idle (See the Accounts section of the Preferences)
    5) If you specifically set an Away Status (or Message) then iChat will do whatever is set in the bottom part of the General Section.
    6) Sleep will put you Off Line and the "When I Quit iChat, Set My Status to Off Line" option will kick in
    The Default is for this to be Unticked.
    There is no setting to create going to Away if left alone.
    I am not entirely sure on this one though as I think it can be created via "Second Pass" things.
    Note:-
    Example of Second Pass.
    Go to the View Menu and the Sort Buddies option.
    If you sort by First Name then the Buddy list is likely to Reorganise itself based on the Address Book Entries.
    If you now Sort by Availability it will organise those First Names by Availability rather than reverting to what was set before.
    (Screen Names Only Buddies will appear alphabetically in any list)
    Now repeat by Sort by Last Name then Availability and you will see that the list is not in the same order as First Names and Availability.
    At this point I am not sure exactly what you meant.
    The Title bit implies that Sleep was/is getting in the way.
    The actual question details leave me wondering what you think you have set iChat to do ?
    8:40 PM      Friday; May 6, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
    , Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order.

    I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order. The "Apply Sort Field" and "Same album does not work, but ti is only these two RCA albums that do this. All other albums remain intact. Need help with this minor problem. Thanks.

    UPDATE: This behavior (to an extent) still happens when "Repeat Album" is off. Instead of an infinite loop, it goes through all the tracks on the album (unsuccessfully) and kicks me out to the Album overview screen. Going back to list of Albums and tapping the Album again brings up "No Content: You can download music from the iTunes Store" but that screen immediately kicks me back to list of Albums.
    So I am just even more confused now.

  • How do I get the playhead to move to the beginning of the cycle area when selected instead of bar 1 after hitting enter?

    How do I get the playhead to move to the beginning of the cycle area when selected instead of bar 1 after hitting enter?

    Grateful pirate wrote:
    Thanks but I think it's more of a setting thing.
    Worked for years in 9 and know my the key commands. Just takes up  lot of extra time. I know there must be a solution just can't find it myself.
    Thanks again.
    Oh, I see…….when I want something like this to happen I would just engage the >Go To Start<  command (0 on the numeric keyboard in my case) and the play head will position at the beginning of a cycle area (if one is active of course)!
    Hope this helps a bit……..

  • I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

    I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

    Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
    OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
    Next, close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
    sudo atsutil databases -remove
    Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
    This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.

  • Setting VIEWPORT_X_POS hide the stack canvas

    In Forms 6i i use the next command:
    set_view_property(l_canvas_stack_name, VIEWPORT_X_POS, l_canvas_stack_x_pos);
    when the l_canvas_stack_x_pos > 0 (in my case = 175).
    But instead of move it to different x position the command hide the canvas (its disappear from window).
    What can be a problem?

    Hi
    If i try the code you modify i see only stack canvas on the window without content canvas.okey that's what i explaned previously u can comment the
    -- Hide_canvas ('canvas_name');
    it can't be used in When-New-Form-Instance because i as said it hides the main basic content canvas.But it will only shows the the content + Stacked and set the cursor focus in ur stacked
    The procedure repaint items on the content and stack canvas according to user definition of items orders (its change item's x position and width).sorry but i can't imagine could u give me an example pls.
    what i got is...
    The user supposed to define items orders u mean in a store application or the oreder of items from a,b,c to say c,a,b according to what i don't know.
    There a missing link here ...
    Its complicate code. If you need i will post it here.i don't understand the concept or the bussiness may be i exactly can't recognize what is the problem any way here is an example that may help u...
    DECLARE
    vw_id ViewPort;
    BEGIN
    vw_id := Find_View('Sales_Summary');
    Set_View_Property(vw_id, VIEWPORT_X_POS, 30);
    Set_View_Property(vw_id, VIEWPORT_Y_POS, 5);
    END; Hope theis helps...
    Regards,
    Abdetu...

  • When I start firefox my options (settings) get set back to the defaults and I am re-directed to the firefox start page instead of my home page. version 3.6.8

    This problem started after upgrading to 3.6.8. It first looked as if Firefox is looking to update some plug-ins, despite setting it not to look for updates. I have the same plug-ins for a long time (MS drm, ad-block +, Java and script .
    I wonder if locking the prefs would help, or make it read only.
    Thank you for any help - I am a firebox addict.

    Possibly a locked or corrupt preferences file. For details on this see the [[preferences are not saved]] article.

  • I just purchased Export PDF, and when I use it, it opens them in WordPad (which I never use) instead of Word. Thus, the pictures are not there, and the fonts are changed. How do I get into Word?

    I just purchased Export PDF, and when I use it, it opens them in WordPad (which I never use) instead of Word. Thus, the pictures are not there, and the fonts are changed. How do I get them imported into Word?

    Hi,
    I checked your account,your Export PDF subscription is in 'Pending' status.
    Once it gets confirmed you will be able to use it.
    Please let us know if you require further assistance.
    Regards,
    Florence

  • I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

    I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

    What is the problem specifiaclly?
    If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
    You could also try Image Processor Pro.
    Scripts Page

  • I have a IPhone 5 and Iphone 5s. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone.  Anyway to solve this problem?

    I have a IPhone 5 and Iphone 5s, each phone is activited with a different service provider. Both are set up with the same account ID and running IOS 8.0.2. When the phones are connected to the same Wifi at home, both phones will ring when someone call in to one of the phone.  Hence you do not know exactly which line the caller called.  If you answered using the wrong phone, then anyone calling the other number will not get through.  Anyway to solve this problem?

    Hey David Koh TP,
    Thanks for the question. It sounds like your devices are set up to use continuity together. Specifically, it sounds like you are signed into the same Apple ID in FaceTime, and have iPhone Cellular Calls enabled. To resolve your issue, simply disable this setting:
    Connect your iPhone, iPad, and iPod touch using Continuity
    http://support.apple.com/kb/HT6337
    Turn off iPhone cellular calls
    To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.
    Thanks,
    Matt M.

Maybe you are looking for