Set/Change System default settings in spro

Hi:
Friends, I want to know how to set system defalut settings, such as parameter of F4 help display interface.
Pls help me ,.
Waiting for your reply .
Thks very much.
Best Regards.
Dana

Dear Dana,
Post your queries in relevant forum to get efficient answers. This would avoid moderators in moving the threads.
The personalization settings can be system level, role level, or user level. Read below information.
Table "SPERS_OBJ" (Personalization object repository) contains these settings (Choose entries for PERS_KEY as EPSS_PERS).
Field PERS_TYPE can have below values:
"A"     Role level
"U"     User level
" "     System level
Which means that the personalisation can be role specific, user specific, or system level. Consult your administrator.
Field OBJECT_ID contains user name.
Other table:
SPERS_REG (Personalization registration table)
Choose entries for PERS_KEY as EPSS_PERS
Regards,
Naveen

Similar Messages

Can I change the default settings for Paragraph Rules?

Hello
I need to apply the same 'Rule Below' to a lot of separate lines of text in InDesign CS5, but the settings I want differ from the default ones in the Paragraph Rules dialogue box. Is there a way to change the default settings so I can just click Rule On rather than inputting the same information a million and one times?
Many thanks

You will need a separate paragraph style for each heading level
Heading Level 1
Heading Level 2
Heading Level 3
For Heading Level 1 - create a Paragraph Style and set it the way you want.
For Heading Level 2 - make sure that in General that "Based on: Heading Level 1", this will give it same properties as H1 - but you can change the size of the text and the size paragraph rule to suit.
For HEading Level 3 - make sure that you set it to Based On: Heading Level 1 (this is vital)
And do the same for all Sub Heading levels.
I'd usually assign shortcuts of
CTRL ALT SHIFT 1 - for H1
CTRL ALT SHIFT 2 - for H2
Etc.
This will ensure consistency across your document.
Say for example you needed to change the colour or tint of all Paragraph Rules
CHANGE H1 ONLY - and this will also be applied to H2 H3 H4 etc. As long as you haven't given different tints/colours to each individual Paragraph Rule in the Styles.

How can I change the default settings in the new pages?

How can I change the default settings in the new pages?

Create a new document and change the settings to what you want i.e. Times New Roman, 12 pt. and save as a template from the Edit menu. Then go to Pages Preferences (Cmd +,) and under general change the template to open to your saved template that you want as your default setting.
Hope that helps.

Hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a

hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

For sideloaded content the nook pulls the metadata from ePub file itself. I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so no you can't them to behave exactly alike without converting the files.

How do I change the default settings for opening documents on my macbook?

Hi I would like to know how to change the default settings for opening documents on my macbook. Everytime I try to open a doc. it automatically opens with Textedit, instead of Pages or another program.

Select any particular document you wish to fix. Press COMMAND-I to open the Get Info window. In the Open With section select the desired Default Application from the dropdown menu. Click on the Change All button to extend the change to all similar documents.
You can only assign one default application to one type of document.

How do I change the default settings on ical

how do I change the default settings on ical - I upgraded to Lion and now every event is automatically clicked as an "all day" and when I unclick the "all day" it gives me an 8 hour window for my event instead of the 1 hour that I prefer! Help!

Select any particular document you wish to fix. Press COMMAND-I to open the Get Info window. In the Open With section select the desired Default Application from the dropdown menu. Click on the Change All button to extend the change to all similar documents.
You can only assign one default application to one type of document.

Can I change the default settings for InfoView?

Hi,
I have a Crystal Reports Server 2008 running. The users access their reports via the InfoView web application.
In this application each user can configure some settings, like whether to use the Acrobat Reader or an ActiveX control for printing. Due to the fact that most users are not experts, is it possible to change the default values for all users by administration?
Regards
Joern

This was previously answered in an older thread. Hope this helps you...
How to set default preferences for all users in Infoview 3.1/CRS 2008
Posted: Feb 13, 2009 9:57 PM
Click to report abuse... E-mail this message Click to reply to this thread Reply
It took me a few tries to figure this out, so I thought I would share the steps I took to accomplish this.
This was successful for InfoView Preferences for a Crystal Reports Server 2008 application (XI 3.1 base).
1. Download the jsp files here: http://service.sap.com/bosap-supportsw
Choose BusinessObjects Enterprise > * > Samples >
"How to set preferences for all users at once in BO XI R2"
2. Extract the files and rename logon.jsp to setpref.jsp
3. Copy the downloaded jsp files to your root Infoview webapp folder (where the wars deployed to). We use the default - Tomcat. The Infoview webapp is deployed to C:\Program Files\Business Objects\Tomcat55\webapps\InfoViewApp\ If this is you, copy to here.
4. From your browser launch http://crystalreportshost:8080/InfoViewApp/setpref.jsp (your infoview link) and follow the instructions!

How can I change printer default settings?

Officejet J5700 series:
How can I set the default settings so I dont have to change the printer Properties each time I print?

just thought of one thing that may have solved the problem. I had not changed color management from automatic to manual. I did that and it seems to now be working the way I want it. More later if that doesn't hold across reboot, log out, etc.

Changing my default settings from outlook to gmail

When I activated my phone, I chose to sync with Outlook. I have now been told from my IT department that I can't access Outlook and need to change the default. I set up a gmail account so that I can forward my mail there, but now I can't figure out how to change my default setting on the phone. It only gives me the options of Yahoo, Windows, and Outlook.
How can I change this?

Try the reset all settings function.
*settings>general>reset>reset all settings*
Message was edited by: jia10

Palete Image trace: How to change the default settings for icon?

Hi!
New palette and action Image tracer is a good step forward and work better, thank you.
This palette has a built-in icons, which significantly accelerate the selection. How do I change the default action?
I know that you can save presets, but this is different. The icons are even faster and more practical.
eg I want to icon B & W automatically have enabled the option "Ignore White".
Best Regards!

No, there's no way to do that, and that's because Lightroom works best as a single catalogue. You have metadata fields like Job which can track individual assignments.
What you could do is create an empty catalogue with settings as you want, then copy the file each time you want to set up a new catalogue.

Changing the default item in SPRO

after navigating to the following path:
SPRO>Financial accounting(NEW)>General Ledger Accounting(new)>Periodic processing>Document-->Define Financial Statement Versions.
Now, right click "Define Financial Statement Versions" and select 'Display Technical Information'.
Now, select 'Maint.Objects' tab and double click any one row in the 'Assigned Objects'.
Here it will show the view details.
Here in the 'Object Attributes' tab the Transport item should have 'Manual transport' as the default item instead of 'Automatic transport'.
How can i change this default to 'Manual transport' ?

Hi ,
I doubt you can change the attributes .
Rgds,
Sandeep

How do you set/change the default alarm TYPE in iCal?

I like to think I'm a power user, but this one I just can't figure out. The question/problem is: How do you sent the default alarm TYPE in iCal? The problem is illustrated in the picture below in the blue circled area.
Specifically, whenever I set a new event in iCal, it defaults to this window with the default alert being "Default (1 hour before)." The one hour before is fine, but the problem is, WHAT is the default? It seems to be just a sound, but that's not good enough to actually alert me of anything.
The goal I'm trying to achieve with this post is to determine how to CHANGE the "default" new event alert FROM "Default (1 hour before)" TO one of two alerts that I actually find useful: I want MY "default" new event alert to be either "email" to the primary address, OR, "Message with Sound".
Any ideas, folks? Thanks.

Understand. I am in the edit mode for my contact. I see all the contact info. There is no right click or other means to change the DEFAULT address that autofill uses (it also is first to appear if I type my name in an e-mail). For instance for a group e-mail you can change the default addresses of each contact by control-clicking on the group in Address Book. I can't seem to make the default change in my v-card.

How do I change the default settings in a printer's Default Settings Preset?

I am running Mavericks, printing to an HP LaserJet 4050N via IP. [The following behavior takes place whether the printer's internal settings are set to Duplex Printing is On or is Off.]
I would like to set the default to print duplex, whether I am in an application or 'drag and drop' a file onto the printer icon (which temporarily opens the application, prints the document, and quits).
I do not seem to be able to modify the "Default Settings" Preset to specify duplex printing. However, I have been able to create a new "Default Settings-1" Preset that specifies duplex printing. By selecting the "Default Settings-1" Preset, in any application, I get duplex printing without any problem.
First -- problem:
If I drag-and-drop a file -- e.g., .pdf or .docx -- onto the printer icon, it opens the application and uses the "Default Settings" Preset -- not the "Default Settings-1" Preset -- and prints single-sided. How do I get drag and drop to use the "Default Settings-1" Preset to get duplex printing?
Second -- issue:
Bizarrely, if I am in an application, select "Show Presets", select "Default Settings-1" and click on "Layout", it sometimes shows that "Two-Sided" printing is "Off" and sometimes that it is set to "Long-Edge Binding" -- but that seems to have no deleterious effect on duplex printing!
Any suggestions / explanations for my problem / issue?
Thanks much,
Avi

Other than using the CUPS interface, http://127.0.0.1:631,which it sounds like you've done, I don't think there is a way to edit the Default Settings. The standard approach is to create a preset, the solution you've found.
For drag and drop printing, you should be able to get to the print dialog and select your preset or turn duplex on by holding the option key down, selecting the file, then doing the drag and drop (either to a printer or to an open printer proxy application).
I realize this isn't a solution, but I hope it's helpful.

How do I change the default settings for opening new window?

Everytime I click on a link, new window would only open in new tab not new window. How would I change this default to open new windows instead of new tab?
Thanks.

HI,
From the Safari Menu Bar click Safari/Preferences (or Command + comma on your keyboard).
Click Tabs. You can set your preferences there.
Carolyn
Message was edited by: Carolyn Samit

Is it possible to change the default settings for the slideshow?

The default settings for any new slideshow use the dreaded Ken Burns effect and some awful background music from a standard library. Having to turn these things off for every new slideshow I start is driving me nuts. Perhaps preferring no music accompaniment and a static photo on the screen is for some people rather boring - but I would prefer it, at least as a starting point. If anyone can help, I'd be very grateful. Thanks
MacBook Pro Mac OS X (10.4.8) iPhoto 6

Choose "Export" and then the QuickTime option.
It will make a 4 track video with a simple "fade" effect between photos. You can set the dimensions and the duration of your photos. You can also remove the music or add your own from your iTunes Library (no purchased music if you intend to share these movies).

Set/Change System default settings in spro

Similar Messages

Maybe you are looking for