Set cluster name and IP address ONLINE

Hi
I had to shut down all cluster nodes. After turned on all cluster nodes I saw in Management cluster console:
Basic cluster resourses:
Name: CLuster1 State:Offline
Adress IP: xx.xx.xx.xx. State Offline
How to set these cluster resources (cluster name, ip adress) Online using Powershell?
Kind Regards Tomasz

Hi Yukio Seki,
If you want to know how to bring cluster resource online please refer the following KB:
Microsoft.FailoverClusters.PowerShell
https://technet.microsoft.com/en-us/library/ee461009.aspx
Failover Clusters Cmdlets in Windows PowerShell
https://technet.microsoft.com/en-us/library/hh847239.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

How do I set Mail to display Name AND email address in the message

I thought I used to have this setting and now I cannot find it (if there is one)
Can't I set mail to show Name and email address in the address box both when creating a message and viewing one?
thanks,
tom

Thanks, Ernie
I wasted about 20 minutes looking for it and couldn't find it
cheers,
tom

Script to extract names and email addresses of all recipients of an email

Hi,
I have found some scripts which extract email addresses from the content of messages in Mail, but I am looking for something rather different, and wonder if such a script exists, or if someone can help me build one. I would like to create a tab delimited text file of the first name, last name and email address of all recipients of a given message in Mail. Most email addresses will be in the format John Doe <[email protected]>.
Thanks,
Nick

Hi,
nick_harambee wrote:
I have one outstanding issue, which wasn't included in the original question. Sometimes email addresses are included in the Name of the recipient, i.e. instead of 'John Doe', it reads 'John Doe ([email protected])'. Could you script be adapted to delete any block of text (i.e. space delimited) that includes the @ symbol, so that 'John Doe ([email protected])' would return:
John<tab>Doe<tab>[email protected]
Use this handler:
on splitName(t)
    if "@" is in t then -- to remove the address after the name
        set n to -3
    else
        set n to -2 -- normal name
    end if
    set tid to text item delimiters
    set text item delimiters to space
    set l to text items of t
    if (count l) = 1 then -- no space
        set r to tab & t & tab -- last name only
    else
        tell l to set r to "" & (items 1 thru n) & tab & (item (n + 1)) & tab
    end if
    set text item delimiters to tid
    return r
end splitName

Reconfig Server Name and IP Address

I've installed Solaris 2.4 on a Sun Ultra. I'm required to re-set this up, but I am trying to avoide full installation from scratch. Is it possible to re-set up the parameters that was entered when I first installed it??
I need to actually change the Server Name and IP address of the machine, and not the network card, as well as root password and other configs entered during installation.
Thanks

Hi,
I am not sure whether this command is there in 2.4. If it is there, you may try running /usr/sbin/sys-unconfig. This does all what you are looking for. It will reboot the system, ask all the questions e.g hostname, ip address, root password, domainname etc. And will again reboot.
Please read man page of sys-unconfig before executing.
Thanks
Kalpesh

Migrate WSUS server from 2003x86 to 2008x64, new hardware, use same name and IP address?

Searching through the WSUS forums and reading the TechNET migration documentation, I have bits and pieces of information to make this a smooth transition...I think. I have a plan in mind but
would like the communities input on what I am thinking before moving forward and having it blowup in my face :). <o:p></o:p>
I have the following currently:<o:p></o:p>
A single WSUS 3.0 SP2 server, running on Server Win2003x86, using the default WID (susdb.mdf) on the same server. I have SQL 2005 Express installed on this server as well for other services
but this has no bearing on the WID correct?<o:p></o:p>
What I would like to do:<o:p></o:p>
I have a new server (a much better one) that I would like to move WSUS on to, that will be running Server Win2008x64 (I have to setup first). <o:p></o:p>
Steps that I would like to follow:<o:p></o:p>
1. I will go through and setup this new server with all M$ updates etc... under a new name (ex. wsusnew) and DHCP acquired IP address and then power it down. <o:p></o:p>
2. Get on my current WSUS server and backup all current WSUS settings, groups, DB etc... to a network location for temporary storage. Then power it down.<o:p></o:p>
3. Delete the current WSUS server computer object in AD, DNS entry I will leave because my intension is to give the same IP address to the new WSUS server.<o:p></o:p>
4. Start the new server, static assign the IP address from the old WSUS server to this new server and then change the name of (wsusnew) to the old servers name, which should be ok sense I deleted
the AD object in step 3.<o:p></o:p>
5. After the obvious restart, the new server will have the same name and IP address as the old server. <o:p></o:p>
6. Now that the new server is up (with same settings name/IP as old server), I will then go through and install the WSUS role on the server and restore my WSUS information.<o:p></o:p>
Questions:<o:p></o:p>
1. Step 2 above, is it possible to do this, without making replica servers? I kept reading about this as I was researching doing this, I would rather just copy the DB and folders and simply
put them in-place on the new server.<o:p></o:p>
2. Step 6 above, restoring of the data, what is the proper way to do this in the scenarioI described? <o:p></o:p>
Thank you to anyone who can provide me some information.
Jeff

Thank you for the reply, I will follow and let you know. Proabably be next week sometime before I'm able to try though. So look for a reponse then. Thank you again.
Jeff
OR...
You can use the much more simple, much more reliable, and much more proven method of:
Install new server as a replica of the old.
Replicate.
Configure new server as upstream server.
Point clients to new server.
Turn off old server after all clients have redirected to the new server.
For everybody that has tried the backup/restore the database procedure described above, they have encounted complications of one form or another.
WSUS has a built-in and fully supported comprehensive replication capbility. use it! :-)
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
Microsoft MVP - Software Distribution (2005-2012)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin

How can I send an email to a group in my address book, but hide the individual names and email addresses?

how can I send an email to a group in my address book, but hide the individual names and email addresses?

You used to be able to do this through leaving unchecked the box in preferences "when sending to a group show all member addresses". However, that feature failed some time ago (two or three years?) and the only way to hide the addresses now is to put the group in the BCC field.

How to email a list of names and email addresses?

I have a group of about 60 people with various amounts of data in each of their Address records.
I want to send an email to the group with a list of the names and email addresses of everyone on the list. I don't know how to do this neatly. Got any ideas?
If I put the group name in "to" in Mail, each person gets a messy non-alphabetical list with commas. If I send a group vCard, I send more data than I want to send. If I make a printed list, I have to convert to a pdf file and send that which is not nearly a simple as a text list.
Is there any way to export fields of my choice from Address into either text or spreadsheet format?
I want to send a list like this, but with tabbed columns.
Steve Jobs [email protected]
Barack Obama [email protected]
yourname1 yourname2 [email protected]
Thanks,
Phil

Thanks, Thomas for the prompt response, but the pdf method has two problems.
First, it's got to be in landscape mode, or the email address word-wrap. That makes for a five-page list. I want to send a 60-line text list.
Secondly, there's no way to eliminate the label (work, home, other...) from the email address field.
I will use the pdf method if no one comes up with a better idea.

I created a Group and put in all names and email addresses but cannot get the group to appear in an outgoing email message. What am I doing wrong?

I created a Group and put in all names and email addresses but cannot get the group to appear in an outgoing email message. What am I doing wrong?

This may help.
Can't connect to the iTunes Store
What happens whenyou try to connect? Error messages?

Get Attachment Name and from address of mail in bpel process

Hi All,
I am using UMS Adapter to poll email server and getting the attachment and saving it to local disk.
In Payload from UMS adapter i am getting href of the attachment but I am not able to figure out as to how to get Attachment Name and From Address of a mail in my Bpel process.
please guide me in getting them .
Thanks in Advance
Divyanshu

1. Double click on your composite receive activity.
2. Go to Properties tab in your receive activity.
3. Click "+".
4. Window that pops up,scroll down and select "jca.ums.from" and store it in some variable say fromAddress (Make sure before adding this property u create fromAddress variable of string data type).
5. Click OK.
6. In the same way add property for "jca.ums.msg.content-description" from drop down and assing it to some variable.
you are good to go.
Hope this helps.
Regards,
Karan
Oracle Fusion Middleware Blog

RE: 1) Changing name and IP address of an AIX 4.2 Server 2)Using NAT

Daniel,
you (normaly) just have to :
1) edit the $FORTE_ROOT/fortedef.sh fileand change the value of variable
FORTE_NS_ADDRESS
2) shutdown and restart forte environment
3) put the new values in the control panel of the client and run !
It worked on our site with the same configuration (Aix 4.2)
Good luck
De : Daniel[SMTP:[email protected]]
Répondre à : Daniel
Date : vendredi 18 juin 1999 13:08
A : [email protected]
Cc : Jose Ignacio
Objet : 1) Changing name and IP address of an AIX 4.2 Server 2)
Using NAT to reach forte
Hello Forte Users :
    I have 2 questions to make:
    1)
    I've installed a Forte Server Central Node (Release 3.0.F.2) in an
IBM RS/6000 with OS AIX 4.2
    (The name of the server is Name_1 and the IP address is
125.125.50.50 with mask 255.255.255.0)
    Nowadays we had to change the name and IP address of this server
lets say to Name_2 and 125.125.60.60 with mask 255.255.255.0.
    After that we try to find any reference to old name and IP address
in the forte directory and all of its subdirectories changing them to
the new ones.
    After these changes we found than forte could'nt start the nodemgr
server.
    We have too many reasons to avoid installing FORTE again.
    Does anybody know if I have to change anything more to make
nodemgr server work.
    2)
    The second question is about NAT (Network Address Translation).
    To reach a Forte Server Central Node from a Forte Client we have
to pass through a Firewall and NAT.
    We are researching and at this moment we can not reach the server
from the client, has anybody any suggestion to correctly configure
Forte (Client and Server) to use NAT between them.
    If anyone could help me I would be very pleased.
    Thank you very much in advance,
    Daniel GonzáLucas (EAM Sistemas Informáticos SL, Spain,
e-mail: [email protected])
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

>> 15 Mins is not enough for completely the replication.
>> use repadmin /syncall /aEpd   - for force replication.
>> Wait 3 hrs minimum.
Regards,
Biswajit
MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
Blog:
Script Gallary:
LinkedIn:
Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..

How to show users display name and email address in open social widget?

Hello experts,
Is it possible to retrieve users display name and email address with opensocial javascript e.g. Login widget seems to load user data (and userData.firstname) during the site init. Is this something that could be consumed or is there some opensocial data request that could/should be used. Any working sample widget spec would be appreciated.
Best regards,
Ville

Hi Ville,
in the logon widget, we also use the data retrevied from siteInit.loadData.data.user. However, this widget is part of the out of the box openSocial widgets, it is being released with the product code, not as a separate OS widget deployed on HANA Cloud Platform.
If you'll do window.parent.siteInit you'll probably will get the data you are looking for, but this isn't the official public API, so you can use it but we cannot commit on keeping this structure.
Why do you need this information in the widget level? Does your widget require authentication or is it for personalization needs?
The best way is to retrieve this info on the java side using HAHA Cloud Platform APIs and send them back to the client.
Look at this - SAP HANA Cloud Platform SDK >
Package com.sap.security.um.user
Interface:
User
This interface provides read access to user data and is an extension of Principal.
UserAttribute
The interface represents abstraction over a user general attribute, such as an e-mail address.
UserProvider
This interface represents the service interface which provides read access to a user implementation.
Inbal

Show user name and IP address

Hi All,
When we upload or create contents or post the messages in the discussion. The user name will be recorded. Is there any ways to record and show both name and IP address of user?
Thanks,
Anucha

Hi Anucha,
Perhaps, I am not understanding your requirement. To upload a file, for instance, you must be connected to the portal, therefore you know who uploaded these documents.
Could you give me more information about your necessity ?
Patricio.

ERROR: Your web form must capture customer name and email address.

Hi,
I keep receiving this error message when trying to checkout and submit a payment.
ERROR: An error occurred. Your web form must capture customer name and email address. Please fix this issue and re-insert your web form on your web page.
The strange thing is it's only happening in chrome. It works perfectly in IE and firefox, the form submits and takes me to the order confirmation page. I've tested it on multiple PCs so it's definitely a chrome issue. Does anyone have any advice as to what could be causing this issue with chrome?
Thanks,
Pete

Check your eCommerce web form in the admin has the ID - 211729
This is what the form ID is, if you have deleted it and made a new one it will not Marry up
The things you normally look for with this error is The first name and last name along with email fields have the right ID and name parameters on the input. The javascript is picking those up so it looks like that is working.
So next is the form in the admin marrying up with the form on the page or in this case the Registration Buy layout.

GETTING PC NAME AND IP ADDRESS

Hello,
I want to Get a PC Name and IP Address through Oracle.
Anyone Help Please.
Thank in Advance.
Muhammad Farooq

Hi,
I check the V$session Dynamic View to get the machine name. But We Also get the
IP Addres of PC.
When we run the following statement the following error occur.
SQL> SELECT SYS_CONTEXT('USERENV', 'IP_ADDRESS') FROM DUAL;
SELECT SYS_CONTEXT('USERENV', 'IP_ADDRESS') FROM DUAL
ERROR at line 1:
ORA-00904: invalid column name
I am using a Oracle 8.0.5 Enterprise Edition.
Let me knoow that where is the SYS_CONTEXT procedure or function or package.
Please Help.
Muhammad Farooq

How do i fix the "web form must capture customer name and email address" error?

Hi all,
I have a webform that is submitting securely to the bc servers. I get the response:
{"SystemMessage": { "success": False, "message": "ERROR: An error occurred. Your web form must capture customer name and email address. Please fix this issue and re-insert your web form on your web page." }}
I have verified that the "FirstName","LastName","EmailAddress" are actually gettting sent with their corresponding values. I can't seem to figure out why i keep getting this error. Can someone please lend a helping hand?!? Thanks guys... here's my code:
var rAction = 'https://site.worldsecuresystems.com/FormProcessv2.aspx?WebFormID=85886&OID={module_oid}&OTYPE={module_otype}&EID={module_eid}&CID={module_cid}&CC={module_urlcountryc ode}&Referrer={module_siteurl,true,true}&JSON=1';
var rData = 'FirstName='+escape(fName.val())+'&LastName='+escape(lName.val())+'&EmailAddress='+escape (email.val())+'&Username='+escape(username.val())+'&Password='+escape(passwd.val())+'&Pass wordConfirm='+escape(passwd2.val())+'&BillingAddress='+escape(baddress.val())+'&BillingCit y='+escape(bcity.val())+'&BillingState='+escape(bstate.val())+'&BillingZip='+escape(bzip.v al())+'&PaymentMethodType='+escape(paymentMethodType)+'&CardName='+escape(cName.val())+'&C ardNumber='+escape(cNum.val())+'&CardExpiryMonth='+escape(expMonth)+'&CardExpiryYear='+esc ape(expYear)+'&CardType='+escape(cType)+'&CardCCV='+escape(ccv.val())
$.ajax({
type: 'POST',
url: rAction,
data: rData,
success: function(msg){
console.log('success');
$('#result').html(msg);
error: function(msg){
console.log('error');
$('#result').html(msg);

Ok -- after testing this out a little on my own I think it must have to do with not properly serialzing the data you are passing in the ajax function. In the example I linked to earlier they are just serialzing the form data and it works because it converts the data in the form's input fields to URL encoded notation.
If you aren't using an actual form on your site to mimick the example I linked to then when building your "rData" string instead of using the "escape" function for each of the parameter values, you should be using the "encodeURIComponent" function instead which instead of escaping characters will convert it to URL encoded notation. That's probably your issue. Here's more about encodeURIComponent(): http://www.w3schools.com/jsref/jsref_encodeURIComponent.asp
Try this with the rData variable instead:
var rData = 'FirstName='+encodeURIComponent(fName.val())+'&LastName='+encodeURIComponent(lName.val()) +'&EmailAddress='+encodeURIComponent(email.val())+'&Username='+encodeURIComponent(username .val())+'&Password='+encodeURIComponent(passwd.val())+'&PasswordConfirm='+encodeURICompone nt(passwd2.val())+'&BillingAddress='+encodeURIComponent(baddress.val())+'&BillingCity='+en codeURIComponent(bcity.val())+'&BillingState='+encodeURIComponent(bstate.val())+'&BillingZ ip='+encodeURIComponent(bzip.val())+'&PaymentMethodType='+encodeURIComponent(paymentMethod Type)+'&CardName='+encodeURIComponent(cName.val())+'&CardNumber='+encodeURIComponent(cNum. val())+'&CardExpiryMonth='+encodeURIComponent(expMonth)+'&CardExpiryYear='+encodeURICompon ent(expYear)+'&CardType='+encodeURIComponent(cType)+'&CardCCV='+encodeURIComponent(ccv.val ())

Set cluster name and IP address ONLINE

Similar Messages

Maybe you are looking for