SET_CODEPAGE_FAILED

We are instlling ECC 5.0 and when trying to configure
STMS it says SET_CODEPAGE_FAILED in Function
TMS_PM_DISTRIBUTE_PROFILE for command TMS_PM_DISTRIBUTE_PROFILE.
saravan

Please change the permission on /tmp to 777.
Thanks,
Raja

Similar Messages

  • TMS Configuration problem - SET_CODEPAGE_FAILED

    I have just installed a new system "CRM 7.0/NW 7.01".  The first thing I am doing is configuring TMS in client 000.  When I try to distribute the configuration I get an error:    TMS Configuration could not start transport control program TP.  SET_CODEPAGE_FAILED.
    I looked at all the previous posts and have done all the prework:  ENV variable dbms_type = ora and I upgraded the kernel to current.
    In TMS I don't get an error when I check the connection or when I check the transport directory.  It only happens when I check the transport tool.  Here is the error message from the dev logs:
    Trace file opened at 20110210 131154 Eastern Standard Time, SAP-REL 701,0,125 RFC-VER U 3 1215400 MT-SL
    ======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
    Timeout during connection setup (check that partner exists)             
    ABAP Programm: SAPLSTPA (Transaction: SPAM)
    Called function module: RFC_TP_INTERFACE_VERSION
    User: PREED (Client: 000)
    Destination: CALLTP_WindowsNT (handle: 3, 64588453, {254135E0-9A35-F1B2-8C05-0013724E7C66})
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3348
    CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
    Timeout during connection setup (check that partner exists)             
    Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1829
    Thu Feb 10 13:11:14 2011
    ERROR => GwISearchPartner: timeout, partner LU: >SITASERV44<, TP: >C:\usr\sap\CR3\DVEBMGS00\exe\tp.EXE< [gwr3cpic.c   6349]
    ERROR => GwISearchPartner: HOST: SITASERV44, conv ID: 64555875 [gwr3cpic.c   6362]
    Thank you for your assistance.
    Peggy

    I copied the wrong dev_rfc log:
    Trace file opened at 20110210 130049 Eastern Standard Time, SAP-REL 701,0,125 RFC-VER U 3 1215400 MT-SL
    ======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
    Timeout during connection setup (check that partner exists)             
    ABAP Programm: SAPLSTPA (Transaction: )
    Called function module: RFC_TP_INTERFACE_VERSION
    User: TMSADM (Client: 000)
    Destination: CALLTP_WindowsNT (handle: 3, 63913828, {953F35E0-66FD-F1C8-8C05-0013724E7C66})
    SERVER> RFC Server Session (handle: 1, 63911750, {983F35E0-5E6B-F160-8C05-0013724E7C66})
    SERVER> Caller host:
    SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
    SERVER> Called function module: TMS_CI_START_SERVICE
    Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3348
    CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
    Timeout during connection setup (check that partner exists)             
    Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1829

  • STMS distribution error - timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'

    Hello All
    i am trying to confugreu STMS but i am facing this error when i am tryin to distribute the same,
    System   EC2              Command  TMS_PM_DISTRIBUTE_PROFILE
    Client   000              Service  tp Profile Service
    User     TMSADM           Start    Online
    Date     20.10.2009       Function TMS_PS_WRITE_PROFILE_TO_DISK
    Time     17:36:23         Message  SET_CODEPAGE_FAILED
    description : Could not start transport control program tp
    detail error is as below if i press on more information
    Could not start transport control program tp
    Message no. TP608 Diagnosis
    There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
      Error code: 4
      RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
    Meaning of the error codes:
      03  RFC system failure
      04  RFC communication failure
    System Response
    The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
    some of the posts on forum suggested i should try from same domain i tried but in vain, then i updated the SAP kernel from 7.01 sp 14 to sp 55. but i am still facing the problem.
    i created this system recently using system copy based upon export image of a system (ABAP stack ) but using ABAP+Java during export process (by mistake). then we tried to build system using import (ABAP stack only i know its weird but its up and running). I assume we should have builf export imgae using ABAP method but some how due to lack of time we proceeded this way.
    The main problem i see is TP RFC . The output from prgram RSTPTEST is as below
    everythign is fine except below entries
    under RFC destination
    EFC ping - timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time out during connection setup (check  that partner exists
    under TP call
    RFC link and Offline Call shws me the same error as RFC ping. and there is no output from tp version and DB connect.
    Can anybody please help me on the same.
    Mani

    Hello All,
      thanks a lot for you reply, i want to clear some point here
    - I have no other physical attached to the system, i created other system as virtual system.
    - to Sunny - i allready went through that thread and upgraded my Kernel also accordign to thread but problem still persist.
    - to Anil .. i did as u said but nothing changed after that.
    here is the log from trans log file
    4 ETW000 r3trans.exe version 6.14 (release 701 - 12.06.09 - 15:20:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 20.10.2009 - 17:37:33
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: r3trans.exe -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Tue Oct 20 17:37:37 2009                                               12584  0.012584
    4 ETW000  [dev trc     ,00000]  db_con_init called                                                        65  0.012649
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                                                401  0.013050
    4 ETW000  [dbcon.c     ,00000]  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    4 ETW000                                                                                160  0.013210
    2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
    i have dbms/type = mss in profile parameters
    I am still getting the same error.
    Mani

  • Problem with STMS configuration ( READ_PROFILE_FAILED )

    Hi All,
    When i am configuring STMS in solution manager getting below error.
    message :READ_PROFILE_FAILED
    Command  TMS_PM_READ_PROFILE
    Service  tp Profile Service
    Start    Online
    Function TMS_PS_READ_PROFILE_FROM_DISK
    Message  READ_PROFILE_FAILED
    Function TMS_PS_WRITE_PROFILE_TO_DISK
    Message  SET_CODEPAGE_FAILED
    error: Transport control program tp ended with error 0212
    Please help me.
    Thanks,
    Balu...

    Hi Balu,
    Key here is
    DB Connect -- Link to database failed
    Offline Call -- could not access file as supposed
    which is tp is unable to connect to your database.. indirectly R3trans may not be working fine.
    While you are configuring TMS tp will conenct to database to update database tables which it is unable to do.
    Please provide trace of R3trans -d
    1. Logon at OS level with <sid>adm
    2. Execute R3trans -d and paste the contenct of trans.log in the same directory where you executed R3trans -d
    3. If you are able to solve DB connection error your self you can else please give OS and DB version and also Environment variables for the user sidadm.
    Thanks,
    Kiran.

  • Error in STMS Configuration

    Hi All,
    I wa sin process to do support patch updation which throwed an error TP_CANNOT_CONNECT_SYSTEM.
    I tried to configure STMS but it shows error like "The TMS configuration is inconsistent".When i click on Overview->System and try to distribute configuration to all system it shows me error as
    Command  TMS_PM_DISTRIBUTE_PROFILE
    Service  tp Profile Service
    Start    Online
    Function TMS_PS_WRITE_PROFILE_TO_DISK
    Message  SET_CODEPAGE_FAILED
    Could not start transport control program tp
    Kindly Help....

    - check your tp path and RFC. If there is error like " Error when opening an RFC connection", then check the RFC connection in SM59
    - check if user authorize to start tp command
    - Please try to register the tp program in the gateway as detailed by SAP note 353597 and then check the radio button "Registered Server Program" in the destination CALLTP_XXX (TCP/IP Connection in SM59)
    - secinfo.* file (note 110612)
    Regards,
    Vincent

Maybe you are looking for

  • How to get exact match when working with Oracle Text?

    Hi, I'm running Oracle9i Database R2. I would like to know how do I get exact match when working with Oracle Text. DROP TABLE T_TEST_1; CREATE TABLE T_TEST_1 (text VARCHAR2(30)); INSERT INTO T_TEST_1 VALUES('Management'); INSERT INTO T_TEST_1 VALUES(

  • Show multiple success messages

    Hi  ,      I ma showing success messages inside a loop verifying a paticulra condition.  Now when the user runs the report in foreground only  the last message is shown.  Is there any way  around. Thanks in advance.

  • Where is my first tab?

    Upon opening Firefox, there is only one "+" tab. When additional tabs are open, they display the full webpage title and can be switched between by clicking on the tab/title. The original page is no where in sight. When I close all the "viewable" tabs

  • Formula colums

    Hi , I have to create formula columns in my report . I have created group on ff_code other fields are lastname, firstname, ssn, APPOINTMENT_DATE, ASSESSMENT_DATE, INFORMATION_RECIEVED_DATE, START_DATE formulas Columns Asses to Staff -- not to display

  • Windows 8 Bloatware Removal

    My Twist came with Windows 8 apps that I don't need.  How do you remove these mess?  The apps are not listed in the Program Uninstall window. Solved! Go to Solution.