Set column preferences help!

I've just upgraded to CS4 and every time I open a new text box, it opens as 2 columns. Without a document open, I went to "text fram options" and it is set at 1. How do I change this so new text boxes are 1 column?!

YES! That's it! I didn't realize it was in my settings of my current document. I was trying to change the preferences for future docs, but didn't realize the document I've been doing "save as" has it set to 2 columns. Thank you!

Similar Messages

Is there a way to set a preference for image resolution in PSE10?

Once I transfer image files from the camera to the Organizer (PSE10), they are listed in the information panel window as having a resolution of 180. I use the printer more than the internet for these files, so I really want the resolution to be 300 or above, and would like to set a preference to that effect. I know that I can resize them individually, or by a group, but I'd like to get the resolution set properly in the first place rather than adding yet antoher setp in my post processing efforts. I am assuming that the resolution is set by PSE10 because I can't find anywhere in the camera's (Canon Powershot SX40 HS) user manual that mentions that the camera sets a resolution. Is there some way that I can adjust the resolution that PSE10 assigns the images when they are imported into the Organizer? I'm using Windows 7 with 12GB Ram. Thank you very much.

Thank you very much for the info. I certainly appreciate it. I’ve been looking everywhere I could think of for how the resolution gets to be 180, and couldn’t find it. I wish they’d have something in their manual about that. Your info helps tremendously. Thanks again..

Spry select list code to wire it to html data table SET column?

I am making a page based on Figure 15-14, Pg 878, in David Power's book, "Dw CS4 with CSS, Ajax and PHP. I have two separate html data tables hidden in the page, one for the specialties drop down select list and the other for the teachers master/detail regions. These are populated with php and working well. The spry select list and master/detail regions are working great except for one issue. The column in my html data table that is being filtered ("Specialty" in my code = 'Category' in the book's example code) is a SET column (with possible value of 1, 2, 3, 4, and/or 5). Clicking on the drop down menu brings up the records with a single value beautifully. The result for records with multiple values is a spry error "Invalid row number: 0". After four different versionings and methods of messing with this, I still haven't a clue. Please help me with how to rewire the Spry select list code so that it will read the records that have multiple items in that column. I have included the code below.
var data_set_teachers = new Spry.Data.HTMLDataSet(null, "teacher_data");
data_set_teachers.gallery = '1';
function chooseSet(dataSet, row, rowNumber)
if (row["Specialty"] == data_set_teachers.gallery) {
 return row;
return null;
data_set_teachers.filter(chooseSet);
function changeSet(set)
data_set_teachers.gallery = set;
data_set_teachers.filter(chooseSet);
data_set_teachers.setCurrentRowNumber(0);
var rows = data_set_teachers.getData();
for (var i = 0; i < rows.length; i++) {
 if (rows[i]["Specialty"] == set) {
 data_set_teachers.setCurrentRowNumber(i);
 break;
var data_set_specialties = new Spry.Data.HTMLDataSet(null, "specialty_data");

Well I'll be damned!
What's done in the sample app is, of course, the intuitively obvious choice and is exactly what I started out trying to do the first time round.
But as I mentioned before, when I first tried it (yes: I'm pretty sure I set the "for" attribute on the inlineMessage components), I got the non-unique component id exception for the inlineMessage component(s) after adding the second (but not the first) row to the page.
Anyway, after dragging my inlineMessages to the exact same position as those in the AppModel example, now things work fine (except I think I'd like a line break before the message and to change the row/column styles so the values and messages line up properly...the look is rather ugly in the AppModel example when there are validation messages displayed).
Not sure, but I'm thinking maybe there was an issue with where the inline message markup was placed, my first time through, relative to the data table value bound component and the column header facet?
I was using the application view drag 'n drop feature the first time round and dragged the inlineMessage component to the spot just below the data table value bound component and hence just above the column header facet. In the AppModel example, OTOH, the inline messages are placed just after the column header facet.
Of course, I will now try to duplicate the original exception.
If I can (and it is an issue with placement), I will post back some sort of bug report or RFE. Otherwise, I'll post back declaring what a bone head I've been...;-)
Anyway, thanks for the quick response, v.
Campbell

Setting Column Names in Dynamic Pivot Query

Hi all,
I'm having trouble setting column names in a dynamic pivot query and was wondering if someone could please help me figure out what I need to do.
To help you help me, I've setup an example scenario in my hosted account. Here's the login info for my hosted site at [http://apex.oracle.com]
Workspace: MYHOSTACCT
Username : DEVUSER1
Password : MYDEVACCTAnd, here is my test application info:
ID     : 42804
Name   : dynamic query test
Page   : 1
Table 1: PROJECT_LIST         (Alias = PL... Listing of Projects)
Table 2: FISCAL_YEAR          (Alias = FY... Lookup table for Fiscal Years)
Table 3: PROJECT_FY           (Alias = PF... Intersection table containing project fiscal years)
Table 4: PROJECT_FY_HEADCOUNT (Alias = PFH... Intersection table containing headcount per project and fiscal year)Please forgive the excessive normalization for this example, as I wanted to keep the table structure similar to my real application, which has much more going on.
In my sample, I have the "Select Criteria" region, where the user specifies the project and fiscal year range that he or she would like to report. Click the Search button, and the report returns the project headcount in a pivoted fashion for the fiscal year range specified.
I've got it working using a hard-coded query, which is displayed in the "Hardcoded Query" region. In this query, I basically return all years, and set conditions on each column which determines whether that column should be displayed or not based on the range selected by the user. While this works, it is not ideal, as there could be many more fiscal years to account for, and this is not very dynamic at all. Anytime a fiscal year is added to the FISCAL_YEAR table, I'd have to update this page.
So, after reading all of the OTN SQL pivot forums and "Ask Tom" pivot thread, I've been able to create a second region labeled "Dynamic Query" in which I've created a dynamic query to return the same results. This is a much more savvy solution and works great; however, the column names are generic in the report.
I had to set the query to parse at runtime since the column selection list is dynamic, which violates SQL rules. Can anyone please help me figure out how I can specify my column names in the dynamic query region to get the same column values I'm getting in the hardcoded region?
Please let me know if you need anymore information, and many thanks in advance!
Mark

Hi Tony,
Thanks so much for your response. I've had to study up on the dbms_sql package to understand your function... first time I've used it. I've fed my dynamic query to your function and see that it returns a colon delimited list of the column names; however, I think I need a little more schooling on how and where exactly to apply the function to actually set the column names in APEX.
From my test app, here is the code for my dynamic query. I've got it in a "PL/SQL function body returning sql query" region:
DECLARE
v_query      VARCHAR2(4000);
v_as         VARCHAR2(4);
v_range_from NUMBER;
v_range_to   NUMBER;
BEGIN
v_range_from := :P1_FY_FROM;
v_range_to   := :P1_FY_TO;
v_query      := 'SELECT ';
-- build the dynamic column selections by looping through the fiscal year range.
-- v_as is meant to specify the column name as (FY10, FY11, etc.), but it's not working.
FOR i IN v_range_from.. v_range_to LOOP
    v_as    := 'FY' || SUBSTR(i, 3, 4);
    v_query := v_query || 'MAX(DECODE(FY_NB,' || i || ',PFH_HEADCOUNT,0)) '
      || v_as || ',';
END LOOP;
-- add the rest of the query to the dynamic column selection
v_query := rtrim(v_query,',') || ' FROM ('
    || 'SELECT FY_NB, PFH_HEADCOUNT FROM ('
    || 'SELECT FY_ID, FY_NB FROM FISCAL_YEAR) A '
    || 'LEFT OUTER JOIN ('
    || 'SELECT FY_ID, PFH_HEADCOUNT '
    || 'FROM PROJECT_FY_HEADCOUNT '
    || 'JOIN PROJECT_FY USING (PF_ID) '
    || 'WHERE PL_ID = ' || :P1_PROJECT || ') B '
    || 'ON A.FY_ID = B.FY_ID)';
RETURN v_query;
END;I need to invoke GET_QUERY_COLS(v_query) somewhere to get the column names, but I'm not sure where I need to call it and how to actually set the column names after getting the returned colon-delimited list.
Can you (or anyone else) please help me get a little further? Once again, feel free to login to my host account to see it first hand.
Thanks again!
Mark

How to set column widths in tables for selected table only, not globally throughout document?

I've been utilizing the below script (thank you so much Ramkumar. P!) to set column widths throughout a sizable InDesign book with tables on every page and it is truly a time saver. At this point in time, I have three versions of it because there are different column widths throughout the book. Is it possible to augment the script to run only on a selected text frame (containing a table)? If so, would someone be kind enough to share the augmented script with me? I've been trying to figure out this seemingly simple change through trial and error with no success as yet. I realize this is a totally newbie request and I'm entirely at the mercy of the kindness of the Javascript gods that contribute within this forum. Seeing that in a different post related to this script, one such guru responded to a request as simple as "Where do I put the scripts in InDesign" gave me enough courage to ask for some help! Thank you in advance to anyone willing to provide a solution.
var myDoc = app.activeDocument;
 var myWidths = [100, 100, 150, 150];
 for(var T=0; T < myDoc.textFrames.length; T++){
 for(var i=0; i < myDoc.textFrames[T].tables.length; i++){
 for(var j=0; j < myWidths.length; j++){
 myDoc.textFrames[T].tables[i].columns[j].width = myWidths[j];
 alert("Table width updated successfully...");

Hello all
I have the same problem in that I'm not a scripting person, but was able to get the above script working without problem, and it does set irregular table column widths perfectly, so thanks to Ramkumar. P for that.
BUT, it changes the column width for ALL tables in the document, whereas I would like to just target the selected table.
Any ideas as to how I might amend this script to achieve this?
Thx, Christian

My iPad reads in Hebrew instead of in Norwegian, even though I have not set my preferences to do so, how do I get it to read in Norwegian again?

My iPad reads in Hebrew instead of in Norwegian, even though I have not set my preferences to do so, how do I get it to read in Norwegian again?

Look here for help.
iOS: How to change the language when it's set to one you don't ...

Setting Portlet Preference in Backing File for Clipper Portlet

Hi All,
I have a clipper portlet, and I am setting the preferences(for form based authentication & passing application data dynamically) in the backing file which is then associated to the Clipper portlet. I looked up at the clipper constants that are available; and the example they have given is
portlet.setPreference(LOGIN_FORM_EXTRA_PARAMS, "name1=value2&name3=value4")
My question is what is this "portlet"?? is it an instance?? then whose instance/object it is?? how am I suppose to declare it in my Backing File??
Any input on this would be appreciated.
Thanks,
G

Hi,
I'm guessing here... but I think that the example is referring to a PortletPreferences object, which can be obtained through a PortletBackingContext with the getPortletPreferences() method. To obtain a PortletBackingContext you just use the static method PortletBackingContext.getPortletBackingContext() and pass in the request in the backing file. See also: Using the Preferences API to Access or Modify Preferences
Hope this helps,
Petri

[CS3, AS] Setting assorted preferences

I am writing a script that will set my preferences to my preferred settings.
I have been able to define most of the preferences but there are a few I cannot figure out.
How do I:
-specify snippets are to be placed in original location
-specify which shortcut set is to be used
-import printer presets from a saved set (.prst file)
Thanks in advance for your help.

On 20/3/09 1:59 AM, "abd" <[email protected]> wrote: > -specify snippets are to be placed in original location See the setting in document preferences. > -specify which shortcut set is to be used I think you're out of luck here. > -import printer presets from a saved set (.prst file) See the import command. -- Shane Stanley <[email protected]> AppleScript Pro Sessions <a href=http://scriptingmatters.com/aspro>

Adblock is not blocking all ads even tho I've set my preferences

I installed AdBlock and set my preferences to stop all ads - even the 'acceptable ads' but I continue to have the invasion. If I can't stop this. Firefox will cease to be my preferred browser. I don't want to see ANY ads while I'm on the Internet. It's bad enough that they appear on videos and the side bars. But popping onto the screen where you are trying to work is just plain rude.

Followed the steps. Hopefully the intrusion will stop. Thanks for the help!

Programatically setting column values for table

hi...
I am programatically setting column values for table.
But these values are not getting reflected on table after commit.
I mean to say,new values are not persisted after commit.
The code is as follows,It is in Application Module class
public void createRecord()
OAViewObject vo = (OAViewObject)this.getOpptyLoeVO1();
if (!vo.isPreparedForExecution())
vo.executeQuery();
Row row = vo.createRow();
row.setAttribute("Id",new Number(850));
row.setAttribute("Model","Honda");
row.setAttribute("Role","Team Lead");
row.setAttribute("Hours",new Number(35));
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
getTransaction().commit();
Here "Id,Model,Role,Hours" are columns in table .

Hi,
is your VO based on an Entity Object?
If not, you can't update values in the DB using only a View Object!
If yes, you should control that, in your VO, you have not selected the flag "Read Only" for the EO you want to update.
Hope this helps you.
Bye
Raffy

Problems getting data into a SET Column

I am having a problem with the SET Column storing multiple days of the week. When I submit the form, a link that says function.implode shows up at the top of the page and enters NULL in my Column. Any ideas why? I also had a lot of server side validation that was in this code. I removed all of it thinking that might be the problem, but the same thing is happening either way.
Here is the code:
mysql_select_db($database_connRegister, $connRegister);
$query_getusers = "SELECT * FROM users";
$getusers = mysql_query($query_getusers, $connRegister) or die(mysql_error());
$row_getusers = mysql_fetch_assoc($getusers);
$totalRows_getusers = mysql_num_rows($getusers);
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "sign_form")) {
if (isset($_POST['days_to_play'])) {
$_POST['days_to_play'] = implode(',', $_POST['days_to_play']);
} else {
$_POST['days_to_play'] = 'Monday';
$insertSQL = sprintf("INSERT INTO users (user_name, password, first_name, last_name, address, city, `state`, zip, phone_number, member_since, email, days_to_play, handicap, home_course, play_in_tournaments, casual_compet, hear_about_us, confirm_pass, site_city, text) VALUES (%s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s, %s)",
                       GetSQLValueString($_POST['user_name'], "text"),
                       GetSQLValueString($_POST['password2'], "text"),
                       GetSQLValueString($_POST['first_name'], "text"),
                       GetSQLValueString($_POST['last_name'], "text"),
                       GetSQLValueString($_POST['address'], "text"),
                       GetSQLValueString($_POST['city'], "text"),
                       GetSQLValueString($_POST['state'], "text"),
                       GetSQLValueString($_POST['zip'], "int"),
                       GetSQLValueString($_POST['phone_number'], "text"),
                       GetSQLValueString($_POST['member_since'], "defined", 'NOW()'),
                       GetSQLValueString($_POST['email'], "text"),
                       GetSQLValueString($_POST['days_to_play'], "text"),
                       GetSQLValueString($_POST['handicap'], "int"),
                       GetSQLValueString($_POST['home_course'], "text"),
                       GetSQLValueString($_POST['play_in_tournaments'], "text"),
                       GetSQLValueString($_POST['casual_compet'], "text"),
                       GetSQLValueString($_POST['hear_about_us'], "text"),
                       GetSQLValueString($_POST['confirm_pass'], "text"),
                       GetSQLValueString($_POST['site_city'], "text"),
                       GetSQLValueString($_POST['text'], "text"));
mysql_select_db($database_connRegister, $connRegister);
$Result1 = mysql_query($insertSQL, $connRegister) or die(mysql_error());
$insertGoTo = "golferstats.php";
if (isset($_SERVER['QUERY_STRING'])) {
    $insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
    $insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));

Yes, I had actually already caught my mistake before you sent this. It is
working now. I have 2 more unrelated questions that can't seem to find in
your book.
#1 - I have an updated page separate from the user input page and I want it
to populate the days_to_play record when they open update so they can edit
these days if they want. I can't get it to show what is already selected.
#2 - I have quotes that appear on the page and it works fine and selects
them randomly when the page is accessed, but I want to add a picture(s).
How can I add pictures to a database table and get them to display randomly
with the text I already have?
Thanks for your help. I am enjoying the book!

Setting column names in JTable

can n e one tell me how to set column names for JTable..
i don't wanna use the JTable constructor ... cuz
my column names change...

this is how i did it once...hope it helps
Vector columnNames = new Vector();
JTable previewTable = new JTable();
previewTable.setAutoResizeMode(JTable.AUTO_RESIZE_ALL_COLUMNS);
previewScrollPane.getViewport().add(previewTable, null);
int colNo = 2; // i am displaying 2 columns
columnNames.add("Col One");
columnNames.add("Col Two");
String[] tableColumnNames = {"Id Name","Type"};
DefaultTableModel aModel = (DefaultTableModel) previewTable.getModel();
aModel.setColumnIdentifiers(tableColumnNames);
//add data to the table
.//loop
aModel.addRow(objects);
previewTable.revalidate();
previewTable.setModel(aModel);

How do I set Premiere preferences for all users - University lab machine?

I am setting up an editing suite for our University which has a "per machine" Creative Cloud licence. It is a PC installation. This machine will be used by a class of students who will log in with their own credentials. I need to set the preferences for Premiere (video output, workspace layout, default drives etc) so that it will be the same for all users logging in since we want a consistent setup for teaching purposes and dont want to have to help each student set up so that it shows correctly on the monitors. Is there a way of saving this setting as the default for every user?
The most important one is the preferences - Playback in order to set up the second monitor.
Message was edited by: Bruce Cooke

Hopefully you did manage to do it.
Reading this should be enough Adobe Premiere Pro Help | Preferences

How to set columns for Zip Codes?

I am new to iMac and in my first week using trial version of Numbers. I work in sales and we do lots of mailings using merging of data and addresses for post cards, labels, etc.
I cannot see how to set columns to a zip code setting. All zips entered beginning with a 0 drop the front 0. I tried calling the column as Text, but it did not help. I can type a ' in from of the 0 and it works, but this takes an insane amount of time and will not work for us.
How do you deal with Zip Codes? Are there labeling options for mailing built into Numbers? I really want to dump all MS products but will have to drop mac and return buy Office if this is not correctable.
Thank you,
Brownie

Hello
Setting the column format to text do the trick on my french version too.
With AppleWorks, I was accustomed to use a zeroSlashed so it remained in my zip codes when I moved codes here and there.
Yvan KOENIG (from FRANCE jeudi 13 septembre 2007 17:44:38)

IMail: How can I set mail preferences to display actual email address and not short names.

Even though I have it correctly set in Preferences , i.e. "Use Smart Addresses" is unchecked, the addressee automatically changes to the person's name rather than the email address. I am unable to find a way to display the actual email address option on iMail (Yosemite) I do not want nicknames/short names but want the actual email address to display on my address line. Can anyone advise please?

Thanks, Ernie
I wasted about 20 minutes looking for it and couldn't find it
cheers,
tom

Set column preferences help!

Similar Messages

Maybe you are looking for