Set copy as master on LOT of photos - LC5.2
Hello everyone!
I switched from LR4 yesterday and I'm confused with "set copy as master" action. I have a lot of virtual copies (about 200) and I want all of them become masters. Photo -> Set copy as master works only on one photo from selection each time pressed. As I remember in LR4 it worked on all selected photos. Is it possible to make them all masters without clicking it 200 times?
If it helps, I'll describe situation: I picked 200 photos, created VCs, converted all of them to B&W. And now I like bw more and want to delete old masters. But it will delete all copies as well. I want to swtich masters with copies and delete copies. Help anybody?
I think - can't verlfy just now, sorry, please check and test carefully, backup everything, check again - that when you "remove" an image with master status from the catalog, where there also exists a VC as well, that this VC automatically changes its status to being a master. LR wil AFAIK not permit there to be only VCs, but no master, against a given file on disk. If there are several VCs present, only one of them will perform this feat, of course.
So if you do want to get rid of the current master version altogether, that might be a quick method.
If you don't want to get rid of the current master versions, it may still be possible. You could export just these masters as a separate (temporary) Catalog; then remove them from the current catalog (as above) causing the current VCs to change their status. Then Import From (temporary) Catalog back again; at which point IIRC Lightroom detects the "clash" of more than one image trying to refer to the same file, and IIRC offers to resolve that via VCs, as one of the options presented.
RP
Similar Messages
-
I copied a lot of photos from an iphone to a DVD using a Windows 7 laptop, now I cannot access those photos on the DVD. HELP! In Windows Exlporer I can see the data on the disk in the details but when I click on it nothing appears as if there is nothing on it.
It should. So they aren't shown in the Last Import smart album, right? Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
OT -
My wife and I each have an apple computer and an iPhone. Setting them up with the iCloud put us on the same account. I take a lot of photos on job sites and she takes her own photos we have to scan though each others photos to find our own. How do I separate the accounts without one of us losing our own stuff?
Decide which device will be changing accounts. On that device, if you have any photos in photo stream that are not in your camera roll that you want to keep on the device, save them to the camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The device(s) that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iDevice. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, to delete any data that you don't want in each account (such as deleting your wife's data from your account, and vice versa) you will have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete it. -
When I try to email and/or copy paste photos to a new email it pastes the full photo(s) vs a jpg attachment. My dads iPad does an attachment. Is there a setting to change the way it attaches photos?
Try restarting the computer
LN -
Import photos without copying? I Have thousands of photos on a hard drive separate from my mac and i dont have enough space on my mac to copy them to. Any way to import without copying to the local hard drive?
Yes, but you might want to think carefully about it.
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing. The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.
This is an attractive option for some users at face value, but it contains a significant number of issues that you might want to consider before making the decision to run a Referenced Library
How to do it:
iPhoto -> Preferences -> Advanced and uncheck the box at 'Copy items to the iPhoto Library'
Now when you import iPhoto makes an alias in the Library Package that points to the stored file. Note: iPhoto still creates a thumbnail of the image and it makes a Preview of edited photos inside the Library Package.
Issues?
1. You are responsible for file management. That's more work:
You must first move the files from your camera to the storage location before importing.
If you want to delete files then you must first trash them from iPhoto and then afterwards find them in your storage and trash them.
Thereafter, you cannot move the files on early versions of iPhoto at all, on iPhoto 08 and later you may move them on the same Volume or Disk. If you move them to a new volume or disk the aliases my break. If they are on an different volume and you move them the aliases will break.
You cannot rename the files.
Migrating: moving to a new machine, moving the files to another disk are all a lot more complex.
2. You gain no extra functionality from running a Referenced Library. Nothing. This is just storage. You still manage the files via iPhoto. You edit them with iPhoto or via iPhoto's External Editor setting, otherwise you're changes will not be available in iPhoto. You don't save byte of storage space.
3. If you have the Library on one volume and the photos on another you if anything changes in the path to a file (Like if you upgrade your machine, move the files on the NAS or on to another one?) then the alias will break, and you'll have to repair it manually. For every photo in the Library. One at a time.
Why do you want to run a Referenced Library?
Because my photos won't fit on my HD?
You can run a Managed library from an external disk. Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
You're worried about accessing the files?
There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected. -
With i cloud set up on my 4GS I deleted photos from Camera Roll to make space knowing I would have them backed up on icloud via Photo Stream. I now find that my older PPC G5 with Lion which wont run icloud. I have an ipad3 too, which of course does. I want to copy photos from Photo Stream back to Camera Roll on the phone so that I can back up "old school" to iphoto on my ancient mac. The controls seem to suggest that as an option but when I select multiple photos in Photo Stream and select "Save to Camera Roll" the photos do not appear on Camera Roll as expected. I am running close to the 30 day limit and do not want to lose hundreds of precious photos (or have to email them to myself individually). Can the ipad3 help at all? Any ideas good people? Dan
If only it were that easy Winston. I connect with a USB cable, iphoto opens and I can only see the photos in Camera Roll, not Photo Stream. There does not seem to be a way of aceessing other files in the phone from iphoto and, as in my initial message, I can not transfer the photos to Camera Roll on the phone. My iphone and ipad software is up to date, but my iphoto is '08 version 7.1.5 with my mac running 10.5.8 which is the best I can do on the PPC without messing everything up. I dont have the dough for a new mac or I would have gone for that option...am I stuck?
-
How do I move large files from a Windows computer to my MacBook Pro? There are a lot of photos (tiffs, jpgs, some photoshopped files), iTunes library, word docs. Is there a particular type of external hard drive that can be used or am I limited to copying stuff onto z-drive and moving that way?
If both computers are on the same network, you can share the files from the Windows host using SMB and mount the share on the Mac. Otherwise, the Mac should be able to read (not necessarily write) any storage device formatted in Windows.
-
hi there, i've just finish our schools year book (voluntarily) and it has 155 pages incl. front/backcover. This file has 1800 links a lot of photos and a few reports. everytime i go to save as PDF it freezers on page 66. i need the book printed in hi-res? im running out of "printing time" as we need it back to school by 10th december for 12th December distribution.
what do i do? if i save it in low res pdf everything will be a blur...can someone please come to my rescue. i have a
OS X version 10.8.2,
Processor: 3.06 GHz Intel Core 13,
Memory 4 GB 1333 MHz RAM
Startup Disk is Moutain Lion
my file is about 24 GB I Purchased a 32 GB USBA stik to save and send to printers.
PDF made easy assistance please anyone out there....?I do not have InDesign so I can't help you there.
Here is an article from Adobe:
http://helpx.adobe.com/indesign/using/exporting-publishing-pdf.html
Export an open document to PDF for printing
Choose File > Export.
Specify a name and location for the file.
For Save As Type (Windows) or Format (Mac OS), choose Adobe PDF (Print), and then click Save.
When you select the Adobe PDF (Print) option, you cannot include interactive elements in the PDF. To export an interactive document to PDF, see Create interactive documents for PDF.
Do one of the following:
To use a predefined set of job options, choose a preset from the Adobe PDF Preset menu.To create a PDF/X file, either choose a PDF/X preset from the Adobe PDF Preset menu, or choose a predefined PDF/X format from the Standard menu.To customize options, select a category from the list on the left and then set the options.
For Compatibility, choose the lowest PDF version necessary to open the files you create.
Click Export (Windows) or Save (Mac OS).
To reset options to the default, in the Export Adobe PDF dialog box, hold down Alt (Windows) or Option (Mac OS) and click Reset. (The Cancel button changes to Reset.) -
Copy single master page from one document to another?
The answer to a previously posted question seems to involve creating a document differently (than I had). A lot of work went into the creation of the master pages in the original document which I will now need to recreate in the new document. Is there a way I can copy one master page from one document to another?
Many thanks,
TheresaThere are a number of ways to do this.
Create a copy of the document you want to copy the Master page from. Delete all pages except for the one you want (but you have to leave Right and Left alone as FM must always have these two pages available).
Open the new document and the one that you want to import the master pages from.
In the new document:
Import from Document: (select the document with the Master Page that you want)
then
File > Import > Formats
and select Page Layouts only.
Note that Right/Left always come along for the ride.
Alternative and probably best way to get a single Master Page:
In new document, add a new Master Page and select "Empty".
In the old document, on the desired Master Page, Select All on page (ctrl+A) and then copy (ctrl+v).
In the new document on the new master page, paste (ctrl+v) to add the layout. Note: you may need to rotate the page first if it isn't in the same orientation as in the old document. -
How can i resize lots of photos all at once keeping original file names
I have been setting up a web page and need to transfer lots of photos. How can I resize all of them to 600 x 400 without losing their orginal file names.
Do you have iPhoto?
Select all the photos > File > Export > Select Size -
Hi,
I have IPhone 4. A couple of days back I tried to open the camera and all of a sudden my iphone started rebuilding the library. Afterwards when I checked, I had lost a lot of photos. Unfortunately I had not backed up on my system. Can someone please tell me if those photos can be recovered?
Thanks.If you had not backed them up or extracted them to your computer already, they are most likely gone. You can try a re-set (hold power and home until you see the Apple logo), but if they don't show up afterward, they are gone.
-
HeLLO I AM USING AN IPHONE 5 From Last few days I DON'T KNOW WHAT HAPEND TO MY SET ITS DISTURBING ME A LOT DON'T KNOW WHY BUT I AM NOT ABLE TO UPGRADE ANY APPS BECAUSE WHEN I AM TRYING TO UPGRADE OR DOWNLOAD ANY APP THROUGH WIFI ND 3G BOTH AFTER SOMETIMES IT STOPS DOWNLOADING AND SHows THAT "UNABLE TO DOWNLOAD THIS APP" IT'S SHOWING THIS MESSAGE IN EVERY APP AND ALSO AT ITS DISTURBING ME AT THE TIME OF WATCHING ANY VIDEOS TOO. BECAUSE WHEN I AM TRYING TO WATCH ANY VIDEO IN YOUTUBE IT'S DISTURBING VIDEOS ARE NOT PLAYING ND SOUNDS ARE NOT COMING PROPERLY ND THE IMAGE QUALITY ALSO BECOMES POOR AND THE VIDEO STOPS AFTER SOME TIMES THIS PROBLEM IS HAPPENING AT ALL THE VIDEO ND IT'S HARASSING A LOT. THE SAME PROBLEM IS ALSO HAPPENING TO MY BROTHER'S PHONE TOO.. REQUEST TO APPLE PLEASE ANALYSE AND FIXED THE PROBLEM AS SOON AS POSSIBLE OR ELSE MAYB I NEED TO STOP USING APPLE PRODUCTS. CAUSE IT'S HARASSING MY DAILY LIFE A LOT....
These are user to user forums. You ARE NOT addressing Apple by posting here.
Also, why are you YELLING at us?? Stop using ALL CAPS.
What steps have you done to try and fix the problem? -
How Do I Set Up a Master Boot Record(MBR) for 3 Different OS's on 2 hdd's?
I am considering putting three or more OS's on my computer. Would someone show me how to set up a master boot record to give me a choice between Windows XP Professional Edition, Solaris 10 6/06, Red Hat Linux 7 (Fedora Core 5), and possibly Knoppix 5.0.1, Snappix, and Morphix? I want the boot record to be posted in both Windows' BOOT.INI file and in GRUB. Thanks in advance for any help from anyone who knows what their doing about this topic.
I am considering putting three or more OS's on my
computer. Would someone show me how to set up a
master boot record to give me a choice between
Windows XP Professional Edition, Solaris 10 6/06, Red
Hat Linux 7 (Fedora Core 5), and possibly Knoppix
5.0.1, Snappix, and Morphix?Have you seen this article?
http://www.sun.com/bigadmin/features/articles/multiboot_laptop.html
I want the boot record
to be posted in both Windows' BOOT.INI file and in
GRUB.What do you mean by that? You can only have one thing in the MBR, but of course that thing could chain to something else.
Darren -
Is there a way I can delete lots of photos at once on iPhone 4?
I need to delete lots os photos from my iPhone 4 and I would like to know if I can select a big number of photos and delete them at once instead of having to delete one by one. Is there a way to do that?
If you have a Mac you can delete them with Preview. To do this, connect your phone, launch Preview, go to File>Import from iPhone..., then select the photos you want to delete and press the Delete key.
-
How do I select and email a whole lot of photos on my iPad from my iPad emails? It seems I have to go into Email and then insert one photo at a time? Isn't there a way to select all in the photos and then email the batch.?
Actually, you can email up to 5 at a time from the Photos app. Select any more and the email share option will not appear.
If you explain why you need to email large numbers of photos, we might be able to offer an alternative.
Maybe you are looking for
-
HT1222 how to start my iphone 4 if its struck on logo?
how to start my iphone 4 if its struck on logo? can any1 help me?
-
Have LR 1.3 working on Tiger OS... should I upgrade to Leopard
I recently bought an 20" IMac and was pleased that it came with Tiger installed so I could use LR while waiting for the 1.3 update. Is anyone using LR with Leopard and are all the features in LR working? Are all the features involved with Lepard work
-
I was wondering if anyone out there could give me an idea of the benefit of moving my email from Thunderbird to Mail. Any ideas?
-
"oracle-validated" package not workable
Hi all ; I have installed Oracle Linux 5.5. Why i cant use the "oracle-validated" package to perform pre req step ? # cat /etc/issue Enterprise Linux Enterprise Linux Server release 5.5 (Carthage) # yum install oracle-validated Another app is current
-
Bug & solution: DW8 not finding stylesheet
Back on 13th April, 2006, I posted a message below about DW8 not picking up the stylesheet on a site I was managing in it. The same problem recurred with another site I've just created from scratch, so this time I set to tracking the bug down. Basica