Set cursor on error field in selection screen

Hi ALL,
How to place the cursor on a particular selection screen field?I am doing validation if validation fails for a particular field the program should give error mesg and the cursor should place on the error field only but it's going to the Ist field on the selection can somebody tell me how do this? I tried with set cursor field <fieldname) but not working I am doing validations on at-selection screen.
Thanks&Regard
mahesh

Hi chandrasekhar find my code below
this code i am writing under  at selection-screen.
*&      Form  Z_VALIDATE_TVKOV
FORM z_validate_tvkov .
  DATA: i_vtweg LIKE vbak-vtweg.
  IF NOT s_vtweg-low IS INITIAL.
    SELECT SINGLE vtweg FROM tvkov INTO i_vtweg
                 WHERE vtweg = s_vtweg-low.
    IF sy-subrc <> 0.
    set cursor FIELD 'S_VTWEG-LOW'.
    MESSAGE e000(z_sd) WITH text-052.
    ENDIF.
   ENDIF.
  IF NOT s_vtweg-high IS INITIAL.
    SELECT SINGLE vtweg FROM tvkov INTO i_vtweg
                        WHERE vtweg = s_vtweg-high.
    IF sy-subrc <> 0.
      MESSAGE e000(z_sd) WITH text-052.
    ENDIF.
  ENDIF.
ENDFORM.                    " Z_VALIDATE_TVKOV

Similar Messages

  • Setting only the TO field on the Created on Field in Selection screen to Current date

    Hello,
    We have a requirement to Set only the To date in the Created on Field in Selection screen to the Current date, I have tried through Dynamic variable option to set the Date calculation but I am able to see Options to set the Current date to From or From and To Created on Date fields instead of setting the Current date only to To created on Field.
    We are in 4.7 and are not supported with user defined variables, Appreciate your inputs on this.
    Thanks and Regards
    Mohammed Roshan

    >
    sunitha j wrote:
    > Hi ,
    >
    > It would br gr8..if u could give some more info about the usage of this class..i mean if i hav to implement it in my program....wat is the necessary data that needs to b copied...
    >
    > Thanx,
    > Sunitha
    what Text field you want to change.
    Since you are working with Dynpros , you have to split the screen in two parts, and one for the Showing differenet fonts and other your normal Dynpro information.
    you need to use the Method ADD_TEXT Did you check the program DD_STYLE_TABLE.

  • How can I add a new field in selection screen for this report

    *& Report  ZGS_BARKODLA_HIZLI_GIRIS
    report  zgs_barkodla_hizli_giris.
    tables: mara,
            mseg,
            mch1,
            *mch1,
            mkpf,
            mchb ,
            makt.
    type-pools: esp1.
    data: i_message_tab  type esp1_message_tab_type,
          wa_message_tab type esp1_message_wa_type ,
          sc_count type i.
    ALV
    type-pools: slis, kkblo.
    data: gs_layout   type slis_layout_alv                     ,
          gt_fldcat   type slis_t_fieldcat_alv with header line,
          gt_header   type slis_t_listheader   with header line,
          gt_sortin   type slis_t_sortinfo_alv with header line,
          g_repid     like sy-repid                            .
    define add-fieldcat.
      gt_fldcat-fieldname     = &1.
      gt_fldcat-ref_tabname   = &2.
      gt_fldcat-seltext_s     = &3.
      gt_fldcat-seltext_m     = &3.
      gt_fldcat-seltext_l     = &3.
      gt_fldcat-reptext_ddic  = &3.
      gt_fldcat-ddictxt       = 'M'.
      append gt_fldcat.
      clear  gt_fldcat.
    end-of-definition.
    types: begin of titab,
            sel   type xfeld,
            matnr type matnr,
            maktx type maktx,
            charg type charg_d,
            menge type menge_d,
            erfmg type erfmg,
           end of titab.
    data : witab type titab.
    data : itab type table of titab.
    data : ok_code type sy-ucomm.
    controls: tc_itab type tableview using screen 0100.
    data: gv_header like bapi2017_gm_head_01,
          gv_code   like bapi2017_gm_code.
    BAPI export parameters
    data: gv_headret type bapi2017_gm_head_ret,
          gv_matdoc  type bapi2017_gm_head_ret-mat_doc,
          gv_matyear type bapi2017_gm_head_ret-doc_year.
    data : lv_objek like inob-objek .
    data : ls_inob  like inob .
    data : imseg type ty_t_mseg.
    data : wmseg type mseg.
    data : answer.
    data : count type i.
    data : v_atinn type atinn.
    BAPI movement details
    data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
          with header line.
    data: i_return type bapiret2 occurs 0 with header line.
    start-of-selection.
    call function 'CONVERSION_EXIT_ATINN_INPUT'
       exporting
         input  = 'Z_ORAN'
       importing
         output = v_atinn.
      call screen 100.
    *&      Module  status_0100  OUTPUT
    module status_0100 output.
      set pf-status '100'.
      set titlebar '100'.
      mseg-werks = 1000.
      mseg-umwrk = 1000.
    **added
      sc_count = sc_count + 1.
      if sc_count eq 1.
        mseg-bwart = 313.
      endif.
      mkpf-budat = sy-datum.
    **added
      describe table itab lines tc_itab-lines.
    endmodule.                 " status_0100  OUTPUT
    *&      Module  user_command_0100  INPUT
    module user_command_0100 input.
      data field(20).
      data: line_t like sy-index.
      data: lines  like sy-index.
      data line_count like sy-loopc.
      data: begin of cols,
             screen      like screen,
             index       type i,
             selected(1) type c,
             vislength   like icon-oleng,
             invisible(1) type c,
           end   of cols.
      case ok_code.
        when 'DELE'.
          delete itab where sel eq 'X'.
        when 'ENTE'.
          check *mch1-charg is not initial.
          read table itab into witab with key charg = *mch1-charg.
          if not sy-subrc is initial.
            witab-charg = *mch1-charg.
            select single matnr from mch1 into witab-matnr
                               where charg eq witab-charg.
            if not syst-subrc is initial.
              set cursor field '*MCH1-CHARG'.
              message e115(12) with *mch1-charg.
            endif.
            select single maktx from makt into witab-maktx
                               where matnr eq witab-matnr
                                 and spras eq syst-langu.
            witab-erfmg = 1.
            concatenate witab-matnr witab-charg into lv_objek .
            clear ls_inob .
            select single * into ls_inob
                            from inob
                            where objek = lv_objek and
                                  klart = '023'    and
                                  obtab = 'MCH1' .
            select single atflv from ausp into witab-menge
                     where objek = ls_inob-cuobj and
                           klart = '023' .
            append witab to itab.
    **added
            clear *mch1-charg.
    **added
          endif.
        when 'SAVE'.
          if mkpf-budat is initial.
            set cursor field 'MKPF-BUDAT'.
            message e055(00).
          endif.
          if mseg-lgort is initial.
            set cursor field 'MSEG-LGORT'.
            message e055(00).
          endif.
          if mseg-umlgo is initial.
            set cursor field 'MSEG-UMLGO'.
            message e055(00).
          endif.
          if mseg-bwart is initial.
            set cursor field 'MSEG-BWART'.
            message e055(00).
          endif.
          refresh imseg.
          loop at itab into witab.
            move-corresponding witab to wmseg.
            append wmseg to imseg.
          endloop.
          call function 'ZMM_POPUP_WITH_DATA'
            exporting
              imseg  = imseg
            importing
              answer = answer.
          if answer eq 'Y'.
            perform create_goods_movement.
          endif.
        when 'P--'.
          clear ok_code.
          perform paging using 'P--'.
          set cursor field 'MARA-MATNR' line 1.
        when 'P-'.
          clear ok_code.
          perform paging using 'P-'.
          set cursor field 'MARA-MATNR' line 1.
        when 'P+'.
          clear ok_code.
          clear lines.
          perform paging using 'P+'.
          set cursor field 'MARA-MATNR' line 1.
        when 'P++'.
          clear ok_code.
          perform paging using 'P++'.
          set cursor field 'MARA-MATNR' line 1.
        when 'SORA'.
          read table tc_itab-cols into cols with key selected = 'X'.
          if sy-subrc is initial.
            field = cols-screen.
            field = field+5(10).
            sort itab ascending by (field).
          endif.
        when 'SORZ'.
          read table tc_itab-cols into cols with key selected = 'X'.
          if sy-subrc is initial.
            field = cols-screen.
            field = field+5(10).
            sort itab descending by (field).
          endif.
        when 'PRNT'.
          perform write_alv.
      endcase.
    endmodule.                 " user_command_0100  INPUT
    *&      Module  read_table  OUTPUT
    module read_table output.
      mara-matnr = witab-matnr.
      makt-maktx = witab-maktx.
      mch1-charg = witab-charg.
      mseg-menge = witab-menge.
      mseg-erfmg = witab-erfmg.
      line_count = sy-loopc.
    endmodule.                 " read_table  OUTPUT
    *&      Module  write_table  INPUT
    module write_table input.
      witab-matnr = mara-matnr.
      witab-maktx = makt-maktx.
      witab-charg = mch1-charg.
      witab-menge = mseg-menge.
      witab-erfmg = mseg-erfmg.
      modify itab from witab index tc_itab-current_line.
    endmodule.                 " write_table  INPUT
    *&      Module  exit  INPUT
    module exit input.
      leave to screen 0 .
    endmodule.                 " exit  INPUT
    *&      Form  create_goods_movement
    form create_goods_movement .
      clear : gv_header, i_return[], i_goodsmvt_items[].
      gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
      gv_header-pr_uname = sy-uname.
    GM with reference to reservation
      loop at itab into witab.
        i_goodsmvt_items-material   = witab-matnr.
        i_goodsmvt_items-entry_qnt  = witab-erfmg.
        i_goodsmvt_items-entry_uom  = 'ST'.
        i_goodsmvt_items-move_type  = mseg-bwart.
        i_goodsmvt_items-plant      = mseg-werks.
        i_goodsmvt_items-stge_loc   = mseg-lgort.
        i_goodsmvt_items-move_plant = mseg-umwrk.
        i_goodsmvt_items-move_stloc = mseg-umlgo.
        i_goodsmvt_items-batch      = witab-charg.
        append i_goodsmvt_items.
      endloop.
    find BAPI processing transaction
      if gv_code is initial.
        perform determine_bapi_code using mseg-bwart
                                 changing gv_code.
      endif.
      call function 'BAPI_GOODSMVT_CREATE'
        exporting
          goodsmvt_header  = gv_header
          goodsmvt_code    = gv_code
        importing
          goodsmvt_headret = gv_headret
          materialdocument = gv_matdoc
          matdocumentyear  = gv_matyear
        tables
          goodsmvt_item    = i_goodsmvt_items
          return           = i_return[].
    cancel blocking process
      loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
        exit.
      endloop.
      if sy-subrc ne 0.
        refresh i_message_tab.
        call function 'BAPI_TRANSACTION_COMMIT'
          exporting
            wait = 'X'.
        wa_message_tab-msgid = 'M7'..
        wa_message_tab-msgty = 'S'.
        wa_message_tab-msgno = '060'.
        wa_message_tab-msgv1 = gv_matdoc.
        wa_message_tab-msgv2 = ''.
        wa_message_tab-msgv3 = ''.
        wa_message_tab-msgv4 = ''.
        append wa_message_tab to i_message_tab.
      else.
        refresh i_message_tab.
        call function 'BAPI_TRANSACTION_ROLLBACK'.
    write a message as there is an unexpected error.
        loop at i_return.
          wa_message_tab-msgid = i_return-id.
          wa_message_tab-msgty = i_return-type.
          wa_message_tab-msgno = i_return-number.
          wa_message_tab-msgv1 = i_return-message_v1.
          wa_message_tab-msgv2 = i_return-message_v2.
          wa_message_tab-msgv3 = i_return-message_v3.
          wa_message_tab-msgv4 = i_return-message_v4.
          append wa_message_tab to i_message_tab.
        endloop.
      endif.
      call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
        tables
          i_message_tab = i_message_tab.
    endform.                    " create_goods_movement
    *&      Form  determine_bapi_code
    form determine_bapi_code using p_bwart type bwart
    changing p_code type bapi2017_gm_code.
      data: lt_t158b type table of t158b with header line.
      clear p_code.
      select tcode from t158b into corresponding fields of table lt_t158b
      where bwart eq p_bwart.
      loop at lt_t158b.
        select single gmcode from t158g into p_code
        where tcode eq lt_t158b-tcode.
        if sy-subrc is initial.
          exit.
        endif.
      endloop.
    endform. " determine_bapi_code
    *&      Form  paging
    form paging using code.
      data: i type i,
            j type i.
      case code.
        when 'P--'. tc_itab-top_line = 1.
        when 'P-'.
          tc_itab-top_line = tc_itab-top_line - line_count.
          if tc_itab-top_line le 0.
            tc_itab-top_line = 1.
          endif.
        when 'P+'.
          i = tc_itab-top_line +  line_count.
          j = tc_itab-lines -  line_count + 1.
          if j le 0.
            j = 1.
          endif.
          if i le j.
            tc_itab-top_line = i.
          else.
            tc_itab-top_line = j.
          endif.
        when 'P++'.
          tc_itab-top_line = tc_itab-lines - line_count + 1.
          if tc_itab-top_line le 0.
            tc_itab-top_line = 1.
          endif.
      endcase.
    endform.                    " paging
    *&      Form  write_alv
    form write_alv .
      perform find_list_header.
      perform fill_field_cat.
      perform fill_sortinfo.
      g_repid = sy-repid.
      gs_layout-colwidth_optimize = 'X'.
      gs_layout-zebra             = 'X'.
      answer = 'Y'.
      call function 'REUSE_ALV_GRID_DISPLAY'
        exporting
          i_buffer_active        = ''
          i_callback_program     = g_repid
          i_save                 = 'A'
        i_callback_top_of_page = 'TOP_OF_PAGE'
          is_layout              = gs_layout
          it_fieldcat            = gt_fldcat[]
         it_sort                = gt_sortin[]
        tables
          t_outtab               = itab[].
    endform.                    " write_alv
         Form  find_list_header
    form find_list_header.
      data : v_datum(10),
             v_datlo(10),
             v_dathi(10),
             v_uzeit(8).
      clear: gt_header, gt_header[].
      gt_header-typ  = 'H'.
      gt_header-info = sy-title.
      append gt_header.
      clear gt_header.
      gt_header-typ  = 'S'.
      gt_header-key  = 'Çal&#305;&#351;t&#305;rma Zaman&#305; : '.
      write syst-datum to v_datum.
      write syst-uzeit to v_uzeit.
      concatenate v_datum '/' v_uzeit into gt_header-info.
      append gt_header.
    endform.                    " find_list_header
         Form  fill_field_cat
    form fill_field_cat.
      refresh gt_fldcat.
      clear   gt_fldcat.
      gt_fldcat-key = 'X'.
      add-fieldcat 'MATNR'  'MARA' ''.
      add-fieldcat 'MAKTX'  'MAKT' ''.
      add-fieldcat 'CHARG'  'MSEG' ''.
      gt_fldcat-do_sum = 'X'.
      add-fieldcat 'MEINS'  'MARA' 'Olcu Birimi '.
      gt_fldcat-do_sum = 'X'.
      add-fieldcat 'ERFMG'  'MSEG' 'Adet'.
    endform.                    " fill_field_cat
         Form  fill_sortinfo
    form fill_sortinfo.
      gt_sortin-up            = 'X'.
      gt_sortin-fieldname     = 'MATNR'.  append gt_sortin.
    endform.                    " fill_sortinfo
         Form  top_of_page                                              *
    form top_of_page.
      call function 'REUSE_ALV_COMMENTARY_WRITE'
        exporting
          i_logo             = 'ZKUTAS'
          it_list_commentary = gt_header[].
    endform.                    " top_of_page

    HI,
    if it is a normal report program then you can directly create a Selection screen field.
    After the Type-pool you can use Parameters or Select-options to create the selection screen field..
    If it is a Modulpool program then you can create a selection scren field like
    SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
    PARAMETERS: p1(10) TYPE c.
    SELECTION-SCREEN END OF SCREEN 1100.
    defines a selection screens – 1100 – as subscreens.
    The next screen number of screen 100 is 100 (statically-defined).
    PROCESS BEFORE OUTPUT.
      MODULE status_0100.
      CALL SUBSCREEN area INCLUDING sy-repid number.
    PROCESS AFTER INPUT.
      MODULE cancel AT EXIT-COMMAND.
      CALL SUBSCREEN area.
      MODULE user_command_0100.
    look at the below link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
    Regards
    Sudheer

  • Error message in Selection Screen

    Hi
    reference no (p_ref) is in my selection screen.
    If this field contains special characters (\ / : * ? " |, ) system must prompt  error message in selection screen. How to do this. Pls help me
    Regards
    Anbu

    after input form the user
    use if condtion
    and validate the field and through message.........
    Reward IF........
    Regards
    Anbu
    Edited by: Anbu B on Jun 17, 2008 8:04 AM
    Edited by: Anbu B on Jun 17, 2008 8:06 AM

  • Default Current year in select option field on selection Screen

    Dear Experts,
    I want to set current year as default value in fiscal year select-options field on selection screen.
    for this, i hv written following code
    DATA:VAR_DATE TYPE SY-DATUM.
    DATA VAR(4) TYPE C.
    VAR_DATE = SY-DATUM.
    VAR = VAR_DATE+0(4).
    this retrieves current year .
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
    SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT VAR TO VAR..                            "Fiscal Year
    SELECTION-SCREEN END OF BLOCK B1.
    Now when i am executing program pop-up is raised describing "Specify the range Limits". Please help.
    Regards,
    Apoorv Sharma

    >
    Ganga Bhavani R wrote:
    > Use below lines.
    >
    > SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
    > SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT SY-DATUM+0(4). "Fiscal Year
    > SELECTION-SCREEN END OF BLOCK B1.
    Hi, Ganga,
    I think it will not working properly that way, Please test the bellow Sample Code.
    TABLES: anlc.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
    SELECT-OPTIONS i11 FOR anlc-gjahr .
    SELECTION-SCREEN END OF BLOCK b1.
    INITIALIZATION.
      IF i11[] IS INITIAL.
        i11-low = sy-datum+0(4).
        APPEND i11.
      ENDIF.
    Thanks and Regards,
    Faisal

  • Grey out fields in selection screen

    experts help needed
    i want to display in the selection screen like this
    sales org                k918
    doc type                 zior 
    divison                   10
    distribution channel    20
    file name      /info/ordersinfo/india/incomming/order/order.txt
    1) i want all the sales org ,doc type ,division,dis channel to be greyed out in the selection screen
    2)file name : the path i have mentioned is the application server path where my text file
    order.txt will be there.
    this i want the user to type this text and also i need to display this as default value.
    i tried like this
    parameters : p_file type string default    /info/ordersinfo/india/incomming/order/order.txt.
    it is giving error. Please help me how to do this

    Hi,
    Try like below:parameters : p_file type string default '/info/ordersinfo/india/incomming/order/order.txt.' obligatory.
    and then in order to grey out your other fields
    at selection-screen output.
    Loop at screen.
    if screen-name  = 'SALES ORG'. <<<Name of the parameter that you have declared
    screen-input = 0.
    modify screen.
    endloop.
    Similarly you can do for other fields too.
    Regards,
    Himanshu

  • ABAP Query : Obligatory fields on selection screen!

    Hi Experts,
    I would like to know the differrent ways through which we can define mandatory fields on selection screen.Options availabel in Infosets (SQ02) as well as Query(SQ01).
    Selection Screen:
    Document Date in Document:  (Mandatory      Select-Option)
    Plant :  (Mandatory      Select-Option)
    Thanks,
    Yogesh

    Hi, Everyone .
    We can do that .
    At selection-screen output (code section 13), set "1" to the field REQUIED by using MODIFY SCREEN code .
    (You can get Dynpro number by F1 key or T-cd SE51 )
    Masao .
    Edited by: MASAO NONAKA on Oct 20, 2008 9:11 AM

  • How to hide input fields on selection screen using variant attribute

    Hello all,
    I want to know how to hide input fields on selection screen using variant attribute conpletely.
    As you know, when setting the attribute of variant "Hide field" checked, the field is temporarily hidden, but when clicking "All Selections(F7)" button on the selection screen, the fileds become appeared.
    I want to hide the field completely. Di you know how to do ?
    Thank you for your support.
    Regards,
    Hideki Kozai

    Use this attribute hide field and save the variant. Then create transaction for this program setting default variant for parameter Start with variant . The user who runs it will have it by defualt set.
    Otherwise
    in PBO simply use LOOP at screen and output = 0 for this field. This will ensure that field is invisible in any case.
    Regards
    Marcin

  • How can i declare a single radio button field in selection-screen ?

    How can i declare a single radio button field in selection-screen ?

    >
    Rob Burbank wrote:
    > And how will you turn it off once it is turned on??
    >
    > Rob
    Thats correct ;)...See ravi if users will ask so many things its our Job to convay the correct solution ....
    Just post your org requirement..SOo some body guide you better//
    Sas

  • Error Message in selection screen Status bar is getting truncated

    Hi Guys,
    Error Message in selection screen Staus bar is getting truncated (full message is not getting displayed).... can anybody tell me how to reslove this

    Hi
    Maimum we can give the error message length is 50 char. If you give more than that it will get truncated.
    What you can do this split 50 and 50 like that you can give 200 chnars.
    Data : Text1 type char50
              Text2 type char50
    If sy-surc ne 0.
    Message Text1 Text2  TYPE "E'' or 'S'
    endif.

  • Throwing error msg in selection screen

    Hi all,
    I want to throw one error message in selection screen .
    This message is of more than 1000 chars.   and i want to show these 1000 chars in  a pop up window and when i press 'TICK' mark, it should stay only in the selection screen . It should not go to the output screen and it should not leave the transaction either..
    Can anyone help me in this by providing the coding for this..
    Regards,
    Shanthi

    Hi Shanthi,
    Your requirement is fulfilled by standard SAP message processing. Through message maintenance (TCode SE91), you define a message with a long text.
    Let us say the message class is ZSHANTHI and the message number is 025. Besides the message short text you defined say 'Something wrong with &. Refer Long Text', un-check the checkk-box 'Self Explanatory', choose this message number and click on 'Long Text' button on the application toolbar. You will get long text editor and you can compose your 1000 lines or even 1000 pages story there.
    Now let us see what you need to do in the report program. Your requirement is 'Issue the error message. When user hits Tick, display long text in a modal window and later stay in the same selection screen'.
    You just issue this message in AT SELECTION-SCREEN event as:
    MESSAGE e025(ZSHANTHI) WITH 'requirement'.
    The error message will display on the status bar and when user hits the message X button, the long text with your story will appear in a modal box and still selection screen stays.
    If your client is adamant in having only 'Tick' mark (this sucks me), you can add DISPLAY LIKE 'S' addition to the above message statement. But this addition works only 4.7 upwards.
    If you want to  issue this error message in list processing events like START-OF-SELECTION, then, you need to issue the following statements:
    MESSAGE s025(ZSHANTHI) WITH 'still weird requirement'.
    Note the message type 'S' above.
    LEAVE LIST-PROCESSING.
    Hope this helps.
    Regards
    Suresh Radhakrishnan

  • Validate a field on selection screen based on value entered on anothr field

    HI,
    There is a program with some fields in selection screen in EWM. The first field is Warehouse. I need to add another field 'Entity to Dispose' in such that what ever value I enter in Warehouse field, its corresponding values should only be displayed as F4 help for 'Entity to Dispose' field.
    For eg: If I select the warehouse as 0799(lets say), then the F4 help for Entity to Dispose field should display only the values which are related to warehouse 0799 (and any other values pertaining to other warehouse should not appear).
    Could anyone suggest, how this can be achieved?
    Thanks in advance.
    Regards,
    Pavan

    Hi,
    You can use FM
    DYNP_VALUES_READ
    DYNP_VALUES_UPDATE
    to read the another field value and Using that field build your internal table for f4 values.
    and use FM F4IF_INT_TABLE_VALUE_REQUEST for F4 values..
    do this on AT SELECTION-SCREEN ON VALUE REQUEST FOR <YOUR_F4_FIELDNAME>.

  • Unable to have field in selection screen of Infopackage

    Hello Gurus,
    I have a small problem,
    I am unable to bring on field in selection screen in Infopackage,
    even thou the object is ticket in DataSources selection option,
    I have noted that the object is of type DEC is it something to do with,
    Or is their any other way to have this object in selection screen of Infopackage,
    Please help me on this,
    Thanks & Regards,

    Bhanu its field type is DEC that’s why its not coming in selection screen in Infopackage .This is a big problem in our Development as this field is SPRIO(Procurement Priority) and we want to restrict this field with conduction SPRIO EQ 1.
    Our DataSource is based on Infoset , Bhanu is it possible to restrict this Field in Infoset writing some code. As their is option in Infoset for CODE we tried this but didn’t work.
    or any other way to restrict this field with 1.
    I really appreciate your reply.
    Thanks Once again.

  • Adding customer field to selection screen of RFKORD11 - Customer  Statement Printing Program:

    Hello,
    We are required to add an important customer field to selection screen of customer
    statement printing program: RFKORD11 for our South African branch.
    Please advise us regarding this matter,
    is there a proper user-exit or a repair is needed?
    Kind Regards.

    Enhancement
    text
    F050S001
    FIDCMT, FIDCC1,
      FIDCC2: Edit user-defined IDoc segment
    F050S002
    FIDCC1: Change
      IDoc/do not send
    F050S003
    FIDCC2: Change
      IDoc/do not send
    F050S004
    FIDCMT, FIDCC1,
      FIDCC2: Change outbound IDoc/do not send
    F050S005
    FIDCMT, FIDCC1,
      FIDCC2 Inbound IDoc: Change FI document
    F050S006
    FI Outgoing IDoc:
      Reset Clearing in FI Document
    F050S007
    FIDCCH Outbound:
      Influence on IDoc for Document Change
    F180A001
    Balance Sheet
      Adjustment
    FARC0001
    Enhancements within
      archiving (FI)
    FARC0002
    Additional Checks for
      Archiving MM Vendor Master Data
    FEDI0001
    Function exits for
      EDI in FI
    FICT0001
    Exits for
      inter-company transactions
    RFAVIS01
    Customer Exit for
      Changing Payment Advice Segment Text
    RFBVX001
    Enhancement for bank
      directory transfer (Austria)
    RFEPOS00
    Line item display:
      Checking of selection conditions
    SAPLBANK
    User exit: Bank data
    SAPLF040
    WF: Preliminary
      posting (authorized for release)
    SAPLF051
    Workflow for FI
      (pre-capture, release for payment)
    SAPLFCPD
    One-time account data
      or different payee in booking
    SAPLSSRV
    User exit: Bank
      account numbers
    RFKORIEX
    Automatic
      correspondence
    please check which one  is better .

  • Transaction DP97: Need to add 2 fields on selection screen...

    Hi,
    I am using ECC6.0. I need to add 2 extra fields on selection screen of transaction DP97. Program name is RVPKMASS97. i did not find any screen-exit for this. Please can anybody suggest any other way to add fields on selection screen... I think i can use enhancement points. please help if anybody has previously worked on this. I need to know following things:
    1) how to add 2 fields on selection screen ( 2 fields are : MATNR-Service product and FFPRF-DIP profile)
    2) where to add programming logic for this
    Thanks in advance,
    Minal

    Hi,
    Go to program RVPKMASS97.
    Go inside INCLUDE rvpkmasspar.
    (When you double click on the include a pop up screen will come up and in that select the RVPKMASS97)
    Click on spiral icon there on the tool bar.
    right click on the '
    ENHANCEMENT-POINT RVPKMASSPAR_01 SPOTS ES_RVPKMASSPAR STATIC INCLUDE BOUND .' line and select enhancement-> create. and give some implementation name and text.
    now you can declare ur fields in this implementation.
    After declaring save it and activate it.
    Now go back to ur txn and run. you are able to see the custom fields on the screen.
    Reward me points if it is helpful.
    I think it will help you out.
    Thanks,
    Prasanna

Maybe you are looking for

  • How do I install the Safari web browser on my iPad?

    How do I install the Safari web browser on my iPad?

  • Restoring a selected file from external drive

    I do a monthly backup, using Backup, to an external drive. Now I would like to restore a file that holds photos for my iPod. It is the file that my iPod syncs with/to when I connect it. I mistakenly deleted some subfiles from this iPod Photo file. Wh

  • How to query on User object in a workflow ?

    Hi experts, I want to email users 1 week before the password expired. For this Icreate a workflow in which I will query for the users who will expire in x days. My problem is that the field on which I want to query (Waveset Password Expiration date )

  • Inconsistency data tablet

    Hi, we have a problem with save data in the tablet. We think that the data in database is in state 7 (inconsistency) and when we're going to save a data is thrown an exception. We want to know, how is the process to have a data in database in state 7

  • Quad core MacbookPro Airtunes lag

    I recently purchased a new MacbookPro (2.3 GHz quad core) and whenever I try to use Airtunes in conjunction with the speakers on the MBP as well, the MBP has a slight, yet annoying lag.  This did not, and does not happen with my old MBP (2.6 GHz dual