Set Datasource Location - Crystal XI to Access 2007 DB

Hi all,
Is it possible to Set Datasource location for a Crystal XI report to an Access 2007 DB? I have reviewed the postings and can not find an answer.
Edited by: Karen Arena on Jun 23, 2009 3:24 PM - I have resolved this on my own, it is possible, see library documentation.

Resolved through documentation in Library.

Similar Messages

VS2010 Crystal Report Crashes System when using 'Set DataSource Location..'

Runtime ASP.NET 3.5
VS 2010
Under Database Fields (rt click) try Set DataSource Location... causes VS2010 to crash.
This is on an imported report from VS2008. VS2008 has no problem with the report.
Since this is a ASP.NET 3.5 program the internal property field
<ResGenToolArchitecture>Managed32Bit</ResGenToolArchitecture>
has been set in the project in order to allow the code to compile w/out errors.
What is solution for Crystal Report Set DataSource Location?

Hi Ken,
Here's one link on the issue: CRVS2010 RTM: Database Expert / External Component has thrown an exception
The reason is Old OS's used c:\temp as the default, now you are require to use %user%\temp as your temp folder as well as using the AppData folder for your app. If CR finds c:\temp it uses it and depending on what is in there it can cause Cr to crash, XML files have been know to do this.
Following MS's new rules on users temp folder should make your app Windows Compliant.
Thanks again
Don

Set Datasource Location does nothing???

I dont get it...
I have reports that are fed by SQL Server stored procedures. Every now and then the developers will change some minor thing in one of the procedures (maybe a Group by or Order by change) and then rename the stored procedure. So for example....
USP_RPT_MYREPORT gets a minor update and gets renamed to USP_RPT_MYNEWREPORT...
(I am over-simplifying, but you get the idea...)
I go into Crystal Reports in Visual Studio and select the "Set Datasource Location" choice off the menu. There, right on the darn screen that comes up it says "highlight the new datasource and click the Update button"... I do that, and absolutely NOTHING happens, NOTHING changes, NOTHING gets updated. I've done this about 20 times and now and every time, same thing - NOTHING happens.
But if I go into the Database Expert, highlight my existing stored proc, and then hit "F2" to rename the alias, and set it to the new stored proc name - BING!!! Everything works just fine.
I looked in the Crystal documentation but of course, nothing there to illuminate whats going on with this seemingly useless "Set Datasource" selection... So...
What is this for? What is it all about? ...and why doesnt it work?
Any help would be appreciated and sorry in advance for being frustrated - I work in Crystal...

Thanks for the response and the attemp to help, but this cannot be quite correct - at least it does not seem so. How do I know this?....
Well, I have 2 stored procedures that are almost exactly alike - the only difference is the ORDER BY clause in the SQL itself (so this should have NO effect on Crystal)...
I use the Set Datasource selection and yes, you are right, it DOES NOT change the name from my old Stored Procedure to the new one. But if you are suggesting that it DID actually change where its pointing I dont believe you are correct because of this...
The report itself has 3 Groups - these group headers are "tied" to the first stored procedure and even though I change the datasource (supposedly), these groups DO NOT change and thus when I run the report I get an error stating that the "Groupings do not exist"...
In other words lets say the first stored procedure is called "SP1" and I am changing to a virtually identical stored procedure called "SP2". Sure enough, when I use Set Datasource, the name DOES NOT change - it still says SP1... But when I run the report the Grouping dies because nothing changed it to "SP2". In fact, the Groups now say "???"
What is particularly odd and frustrating about this (and also the sign of a very poorly QA'd product) is that if I go into the Database Expert and simply press "F2" and change the alias from SP1 to SP2, that seems to do the very thing that Set Datasource seems entirely unable, undesigned and unwilling to do.
Bear in mind here that I have worked with Crystal for 3 very painful years and when any fields (columns) change in the backend SQL, I understand that it takes hours to rework the entire report - its stupid, it shouldnt take that long, but I have just accepted it with this klunky product - but when NO fields change it seems to me that should be very easy to manage and yet the only way I have found to do it is to try Set Datasource, watch it fail again and again and then use the Database Expert (and the F2 key in there) to rename the alias.
In all the Crystal documentation I have (downloaded, and came with product) there is not one line I can find that talks about what Set Datasource is supposed to do, and should be doing.
Anything that would make my life easier with this sometimes beastly product would be most appreciated.

Crystal 10 set datasource location issue

I am getting hung up when trying to set a datasource location in Crystal 10. I have tried uninstalling and reinstalling the software. Any ideas?

Hi,
Try with this:
1. Reduce the 'Hardware acceleration' setting in Microsoft Windows.
2. To access the 'Hardware acceleration' setting in Microsoft Windows:
Click Start > Settings > Control Panel > System > Display > Settings > Advanced > Troubleshooting.
There are typically six possible settings for 'Hardware acceleration': from 'None' to 'Full'.
If you are using Dual monitor run the CR application on primary monitor cause Dual monitor is not tested with Crystal Reports.
Regards,
Shweta

Crystal crashes when trying to "Set Datasource Location"

Hi,
My client's Crystal app (version 9) crashes when she attempts to remap a report using the "Set datsource Location". Basically, as soon as she selects it, she gets a msg ..something like "CRw32.exe error" and the app bombs.
Any ideas on what may cause this folks ??
thx a lot,
Steve

Open the report up and Click on Database, Set Location, find ODBC in the list and connect using your DSN. Now select your DB and tables, varies so you may have just click on the OLE DB connection and the n DSN and click Update button or you may have to do this for each table also.

Set Datasource location in Crystal XI not working

I have what seems to be a common problem with the setting of a datasource in Crystal XI designer.
I am converting my Crystal 8.5 reports to crystal XI.
The connection I am using is an OLE DB(ADO) connection to SQL Server 2005.
When I try to change the Datasource from a test database to a production database, absolutely nothing happens.
The data displayed on the report is the data from the database from which the report was designed.
I have scoured the internet and have found numerous complaints about this issue.
The only semi-acceptable solution I have found is that you have to go into the properties of each table on the report (including subreports) and change the Overridden Qualified Table Name by typing in the name of the table.
Is this the only solution?
I have over 300 reports. Many with subreports.
How archaic is this?
Is there at least some sort of conversion program available that would help me with my existing reports.
I have no problems during runtime. It is only the designer with which I am having an issue.
Any help is appreciated.
Leonard
Edited by: Leonard Mann on Oct 13, 2009 4:25 PM
Edited by: Leonard Mann on Oct 13, 2009 5:23 PM

Hi Teri,
Thanks for the input. I thought I would try this out in the simplest way possible.
The results are a little bizaar but I think they may be helpful in finding a solution.
I simply cannot understand how any one has been able to get this to work as I have tested this on various PCs using different crystal version and service pack combinations. Both crystal 10 and X1. XP and Windows 7. Nothing has worked.
This is what I did.
Create 3 databases, each with 1 table (COMPANY) and 1 Column (COMPANY_NAME).
First database (LIVE_DB) on 'Server 1' with COMPANY_NAME = 'LIVE COMPANY S1'
Second database (TEST_DB) on 'Server 1' with COMPANY_NAME = 'TEST COMPANY S1'
Third database (TEST_DB) on 'Server 2' with COMPANY_NAME = 'TEST COMPANY S2'
TEST #1 - USING ODBC (RDO) *********
Setup 3 Datasources using 'Data Sources (ODBC)' in Administrative Tools.
LIVE_DB_S1 - Points to Database LIVE_DB on Server 1
TEST_DB_S1 - Points to Database TEST_DB on Server 1
TEST_DB_S2 - Points to Database TEST_DB on Server 2
Create report with 'Company Name' using DataSource LIVE_DB_S1
Report name correctly shows 'LIVE COMPANY S1'
Change data source to TEST_DB_S2
Error occurs: Database Connection Error: '42S02:[Microsoft][ODBC SQL Driver][SQL Server] Invalid object name 'LIVE_DB.dbo.COMPANY'.[Database Vendor Code: 208]
Crystal appears to be looking for the Database 'LIVE_DB' on server 2 and it does not exist.
Changed the datasource at the table level
Reran report - Report name correctly shows 'TEST COMPANY S2'
Changed Datasource back to LIVE_DB_S1
Reran report - Report name incorrectly shows 'TEST COMPANY S1'
Crystal appears to look for the Database TEST_DB on Server 1 and finds it and therefore displays the wrong Company Name.
Scrap this report close crystal and start from scratch.
Create report with 'Company Name' using DataSource TEST_DB_S1
Report name correctly shows 'TEST COMPANY S1'
Change data source to TEST_DB_S2
Report name correctly shows 'TEST COMPANY S2'
Change data source to LIVE_DB_S1
Report name incorrectly shows 'TEST COMPANY S1'
Crystal seems to have changed the server but not the database.
TEST #2 - USING OLE DB (ADO) *********
Setup 3 Datasources usong OLE DB after opening Crystal.
Since the name of an OLE DB connection is the SERVER, for the purposes of this example let's pretend that each connection has a name the same as above.
LIVE_DB_S1 - Points to Database LIVE_DB on Server 1
TEST_DB_S1 - Points to Database TEST_DB on Server 1
TEST_DB_S2 - Points to Database TEST_DB on Server 2
Create report with 'Company Name' using DataSource LIVE_DB_S1
Report name correctly shows 'LIVE COMPANY S1'
Change data source to TEST_DB_S2
Report name correctly shows 'TEST COMPANY S2'
Crystal correcly switched the Server and the Database.
Changed Datasource back to LIVE_DB_S1
Reran report - Report name incorrectly shows 'TEST COMPANY S1'
Crystal appears to look for the Database TEST_DB on Server 1 and finds it and therefore displays the wrong Company Name.
Scrapped this report and headed to the bar for a shot of SANITY.
Leonard

Set datasource location command at runtime

Post Author: Jamal
CA Forum: Semantic Layer and Data Connectivity
Dear Folks,
I have crystal report 10 and MS access, I need to change my datasource location at runtime without having to type code other than crystal report like VB or C++, Do crystal report have this possibility to change datasource location at runtime without needing to code other than crystal report ???
Basicly I have multiple MS access database files and need one Crystal report to read from all of them at the same time, how can I do that without coding in a language other than crystal report.
Best Regards
Jamal

Post Author: matthewh
CA Forum: Semantic Layer and Data Connectivity
Get a copy of BO Server and use a Business View. Don't know of any way in Crystal Reports itself. BO Server is good but it ain't cheap. Depends on how many users you have and what sort of budget you have. I'm using it here and it has a lot of benefits. Alternatively build a data warehouse just for reporting using a proper DB engine and get a single report off that. Use something like MySQL - fast, and above all - free! If you don't need bang-up-to-the-second reports then run a scheduled data extraction and upload over night, load the data into the new warehouse and then run your reports against it. I'm in the process of doing just that. Read Ralph Kimball's books "The Data Warehouse Toolkit" and "The Data Warehouse ETL Toolkit" to get the idea. The MySQL forum has a good Data Warehouse section. A warehouse also gives you many advantages in that your production databases are not too heavily loaded, all your data conforms to set standards (eg data formats are all the same) and you have a historical record that can build over the years to many GB of data - I think Access will struggle with that ;0) - to name but a few. Hope this helps. BTW - thought of this last night - MySQL also has the Federated engine - so you could hook all your databases into it and query it with Crystal as though they were a single database. Not sure if it'll connect to Access though.

Error in setting datasource location from oracle to sql server

Post Author: jonathanaramburo
CA Forum: Data Integration
Hello,
I have an application that uses a table named "events" which conflicts the sys.events view in master database in sql server. The error i was encountering is that, whenever i tried to set the datasource location of my crystal report from its previous connection oracle to sql server, i get an error saying that some of the fields has not been updated because theres no matching fields to the current connection. It seems that crystal is pointing on sys.events view on master db and not on the events table in myDb database. How can I tell crystal reports to not pick up sys.events and get only myDB.events table.
Thank you in advance,
Thanks,
Jonathan

The exact statement in oracle side which causing this error (O2SS0050:
Conversion of identifier 'to_date(VARCHAR2, CHAR)' is not supported.) is below:
dStartDate:= to_date(sStartDate,'MON-YYYY');
Statement causing error O2SS0050:
Conversion of identifier 'regexp_replace(VARCHAR2, CHAR)' is not supported is below.
nCount2:= length(regexp_replace(sDataRow,'[^,]'));
So there is no statement which is using to_date(VARCHAR2,
CHAR) and regexp_replace(VARCHAR2, CHAR) in as such. 'MON-YYYY' and '[^,]'
are CHAR values hence SSMA is unable to convert it from varchar2 to char.
Regarding SYSDATE issue, you mean to put below code in target(SQL) side in SSMA ?
dDate date := sysdate;
Thanks.

Set datasource location and remapping fields in code instead of designer

Dear all,
We are currently migrating a VS6 reporting project to VS2010. The old project has like 133 Crystal Reports XI release 2 reports.
All of these .rpt files need to have their datasource location changed and fields remapped because of a change in naming convention.
The datasource location is currently set to a stored procedure in an Oracle database and this will remain; only the name of the
stored procedure and the name of the fields returned are changed (due to new naming conventions).
Is there a way, and I really hope so, to programmatically change the datasource location and remap the fields (mind that these fields are also used in formulas, grouping, total, ...).
Doing this manually in the designer for like 133 times would be very time consuming.
After some research I stumbled upon the CrystalDecisions.ReportAppServer.Controllers.DatabaseController but I'm looking for some example usage, if this is the correct way.
The end result should be that all these 133 .rpt files have their datasource location changed and fields remapped.
Any assistance or pointers in the right direction would be kindly appreciated.
Thanks.

Not aware of how you can do this in code.
However, there are third party products which you can use to mass update reports with datasource and table mapping.
RptInspector is a product I know of that can do what you want.
Ian

Crystal 10 hang up when I click 'set datasource location...'

I got this problem from yesterday, and I use crystal for many year, never have this problem.
I'm not sure is it a license problem? Thanks.

I uninstall and install cr10 again this morning, problem still there.
I install a software developed by myself 2 days ago, but it doesn't have relationship with the CR. Check .dll is good idea, but I check the dependency, nothing missed:(
Database side, it just run as normal. No new table, new sp. I'm afraid it's virus. I scan the disk by ESET, all clear.
That's all I did to found out the problem. Thanks for your answer. If find out the reason finally(I hope), I will post it here:)
Thanks

Clearing the History Folder on the Set Datasource Location dialog

I am using Crystal Reports for .NET 2.0 and am using VS 2005 Pro. Does anyone know if there is any way of clearing out the items in the history folder in the SetDataSource Location dialog? I have been told there is no way to do this, but I figure VS is storing this information somewhere, right? Is it stored in the registry? If so, where is it? Thank you in advance!
Ed Cohen

Hi
I have had a lot of failures with CR so I ended up with several datasource connections for CR. I wish to be able to clear them too. your answers that you can right-click them and select remove doesnt work for me. there is no option to remove them when you right click. also the path given for the key; i have tried searching my computer for a crystal decisions folder but couldnt find it. I use CR that comes with VS2005. could you be a little bit clearer on where that registry file would be found in my case: HKCU/?
Thanks.
Mambo

Setting Datasource Location

Hello,
I have a complex report and I am trying to avoid having to re-create it.
The report's driving table (the left-outermost table) stores data for each employee by period. So say you have 3 periods, Jan09, Feb09, and Mar09, you will have 3 records for 1 employee. Basically it is a historical data warehouse table.
The left outermost table is this very data warehouse table. What I want to be able to do is bring back only those records for the period in which we are in. If I use a select expert to filter on the period, it appears as though the reports still scans all the records in the table first and then filters when it already gets into Crystal. A very poor performance resoluion.
I tried creating SQL Command that says
select *
from table
where period='{?Enter End Period}'
Then use this as the main driving table and left outer join it to the previous driving table. But it still appears as though it parses through all the records.
I don't want to recreate the report so how can I do the filtering on the database level before it gets into Crystal?
Thanks in advance,
Zack H.
Edited by: Zack H on Sep 4, 2009 11:23 AM

This is showing as answered, but I don't see any responses, so I'll go ahead.
In Crystal, go to the File menu and select "Report Options". Make sure that "Use Indexes or Server for Speed" and "Perform Grouping on Server" are both checked. You can also set these values to be your defaults by going to the File menu, selecting "Options" and going to the Database tab.
However, some things will affect whether the sorting and grouping actually happen on the server. For example, if you're using a Crystal function on a field in your selection criteria or as a group, it may cause Crystal to bring down all of the data and process it locally.
-Dell

Crystal Reports 2008 - Error setting new datasource location

Hi All,
We are experiencing an issue while trying to set datasource location for our RM 3.0 reports in Crystal Reports 2008 designer. As per guide "SAP BusinessObjects Process Control 3.0 and Risk Management 3.0 - How to build and Personalize Custom Crystal Reports" (step 11), after opening the desire report we go to DataBase-->Set DataSource Location and when selecting our RM system (which actually has the BI content addon installed on it), we got the following error message:
"Some tables could not be replaced, as no match was found in the new data source. Please verify the table required for any unmodified tables"
I'm new on this so I'm not sure if the table indicated in the original datasource should exist in my DB (new datasource) before doing this? If so, how those tables are imported or created in our DB?
Could you please help me on this issue?
Please let me know if any other detail or data is required.
Regards

Hi Don,
Thanks for the update.
Actually I've installed SAP Integration Kit and its Fixpack in both....BOE Server (which is the same as the SAP server) and in client pc. In all cases we have select a typical installation which supposes the required drivers are available. Also I've followed Ingo's documentation to activate and publish standard Risk Management reports (RM reports). Everything works ok with them. We are able to access reports through the application.
The issue appears when trying to customize one of these standard reports through CR Designer. For example if we select the "GRRM_Risk_by_Risk_Category" and try to customize it as indicated in the "SAP BusinessObjects Process Control 3.0 and Risk Management 3.0 - How to build and Personalize Custom Crystal Reports"...the table behind this report (table GRFN_CY_API_GRRM_R1) it's not in our RM System. My main concern or question is regarding this....Did I miss something while importing transports files, activating or publishing RM reports, etc....and thatu2019s the reason why this (and any other) table is not already in my system? I was not able to find where those tables are supposed to be or how they should be imported in my system. The odd thing is...that we are trying to customize and set the new data source for these reports to the same system from where they are being opened. Put in this way...RM reports have been activated in system A (RM System) and published to system B (BOE System). While customizing reports through CR Designer...we are actually opening reports from system A. These reports have as their original data source...a demo SAP system info (uxcir1p.wdf.sap.corp) and when we want to update this data source with our RM system....the error appears. The whole process is explained in the above mentioned guide for your reference.
Hope being clear enough..
Thanks for your help

Selecting Datasource Location in Crystal XI causes software to lockup

Anytime I click on Set Datasource Location in Crystal Reports XI Release 2, the software locks up. I have to do a CTRL ALT DEL and End Task.
Can someone help me?
Thanks!
Glynn

Don,
The only question that I can answer from the ones that you posed is my operating system: XP.
One of our computer techs installed the software on my computer for me from our school district's network.
BTW, my wife works for a guy by the name of Don Williams down here in Southwest Louisiana.
Glynn

Oracle Streams b/w MS-Access 2007 and Oracle 10g.

Can we set up Oracle Streams between MS-Access 2007 and Oracle 10g? Ms-Access as source and Oracle 10g as destination database. If so, can any one please give me little heads up with supported doc's or any source of info.

Help Help....!!!

Set Datasource Location - Crystal XI to Access 2007 DB

Similar Messages

Maybe you are looking for