Set default address when card contains several

If someone in your address book has multiple email addresses, how do you set which address is the primary one to which email is sent? (Or does it go to all addresses?)

never answered... just cleaning up unanswered questions

Similar Messages

  • How to change the default JRE when there are several version of JRE in Sys

    How to change the default JRE when there are several version of JRE in System?
    i have installed j2sdk1.5.0 then installed j2ee1.4,then installed Weblogic6.1 which use jdk1.3
    Now the JRE is jdk1.3\bin
    When run class that was compiled with jdk1.5,throw:
    java.lang.UnsupportedClassVersionError
    How can i change the jre to 1.5?

    There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
    Excerpts from sun docs:
    However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
    Example:
    Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
    Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
    Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
    Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
    If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
    Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
    Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
    Details are here
    http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
    My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
    Will update if i find more information

  • IPhoto can't import when card contains movies

    Hi all,
    I have been suffering from a weird problem for a while: once in a while iPhoto refused to import images from an SD card and hung with the color wheel spinning until the next reboot. If interested, the original thread is here:
    https://discussions.apple.com/thread/3308591?tstart=0
    I was never really able to track down the cause of this, it disappeared when the card was reformatted in the camera. Since it happened again today, I did some systematic investigations. It turned out that not only iPhoto, but also Image Capture is affected: As soon as an SD card plugged into the Mac contains a movie, things get messed up. In iPhoto, all I get is the spinning wheel.  In Image Capture, all images taken BEFORE the movie are shown as thumbnail pictures, but the movie and later images are not. Even if the card is ejected in Finder, Image Capture still shows it, but it shows no images. This continues even when the card is plugged in again and/or Image Capture is shut down and restarted. It remains until the Mac is rebooted.
    If the card contains no movies, everything is fine. All this happens regardless from what card reader I am using (I tried two different ones) and what camera the files on the card were taken with (I tried a Casio Z-1000 recording AVI movies and a Panasonic FT-3 recording MOVs). The issue also appears regardless from the size of the movie file (I took a very short one, even smaller than a usual image file).
    It only happens on my wife's Mac (2006 MacBook Pro CD 1.83 GHz, latest Snow Leopard, latest iPhoto). The problem does NOT appear at all on my 2008 MacBook (C2D 2.4 GHz, same software).
    I can still import into iPhoto when simply copying the files to hard disk and importing from there. In contrast to what I described in the thread linked above, iPhoto now recognizes already imported images.
    Any hints how to solve this are really appreciated!
    All the best,
    Thomas.
    EDIT: This reads just like this one:
    https://discussions.apple.com/message/15860473#15860473
    so at least I'm not alone with this problem.

    Phil:
    Movies rotated with Quicktime Pro import into iPhoto OK. I downloaded and tried TransformMovie and it wouldn't import. It had been changed to a .mov file. There were some differences in the video portion as indicated by QT Player, mostly in video offset. But changing it to what the QT version was didn't help. When I did a Save As in QT Player the resulting file was importable. QT Pro is worth the money and more. You can do a lot of things with it.
    EURIKA! Just change the file's extension back to .avi and it will import.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • How to set default button when press "Enter"

    Hi,
    I have a form and it has only one button (Submit). When I press "Enter", it can submit the form and do the action. However, when I add another button (Normal button, not submit), it cannot perform submit action directly when I press "Enter".
    If we press "Enter" and the form can submit automatically, it is more user-friendly than without this feature. Therefore, may I know the method of set the default button when users press "Enter"?

    At first I thought the order of the form controls might matter.  When I run this code:
    <cfdump var="#GetTickCount()#">
    <form action="TestCfgrid.cfm" method="post">
    <input name="x" type="text" />
    <input type="button" value="x" />
    <input type="submit" />
    </form>
    While I am in the text box, if I press the enter key the form submits.  I originally tried it with the submit and button inputs in the opposite order.
    Note that the enter button will not submit the form if you are in a select control (aka dropdown) or a textarea or if your focus is not on a form element.  That's the default behaviour.  If you want to override that, you'll have to write some javascript.

  • How to set Default text when sending a blank mail from SAP

    Hi all,
    How to add Signature with company logo in the mail body.
    User should see at least one default text (eg; Hi) in the mail body if the sender did not type any text in the mail body when sending a mail from SAP.
    Is it possible to set like this on Subject also.
    Kindly share your ideas.
    Regards,
    Mathan A

    Hi Mathan,
    Please check sap note
    SAP Note No. 1304146 Email Signatures feature note
    1163250 - How to Create an Email Signature on several rows
    I hope it will solve your issue.PLease mark thread as answerd.
    Best Regards,
    Atul

  • ALSA: Setting default device (Not card, but device)

    This seems to be a riddle that nobody can solve;
    - The system only has one card by the name of 'Intel'
    - That card is the regular 6 3.5mm jack soundcard.
    - I have a mic plugged into the red microphone plug
    - I open up Audacity and go to preferences, there are two microphone plugs, 'hw:0,0' and 'hw:0,2'
    - I have no idea where 0,0 is and it doesnt make any sound, I plugged the mic into every plug on the board and nothing records.
    - i can set Audacity to use 0,2 and then it will record my voice just fine
    When I open up xfce's mixer I see that there are two mic plugs:
    Apparently "Front Mic" is the device that is hw:0,0 right now/
    Now when I play Savage2 I don't have an option to choose the device, I can choose the soundcard but that doesn't help. How do I set the default Device so that the game uses hw:0,2 in push-to-talk?

    from the alsa archwiki:
    "Setting the default Microphone/Capture Device
    Some applications (Pidgin, Adobe Flash) do not provide an option to change the capture device. It becomes an issue if your microphone is on a separate device (i.e. USB webcam or microphone) than your internal sound card. To change only the default capture device, leaving the default playback device as is, you can modify your ~/.asoundrc file to include the following:
    pcm.usb
        type hw
        card U0x46d0x81d
    pcm.!default
        type asym
        playback.pcm
            type plug
            slave.pcm "dmix"
        capture.pcm
            type plug
            slave.pcm "usb"
    Replace "U0x46d0x81d" with your capture device's card name in ALSA. You can use 'arecord -L' to list all the capture devices detected by ALSA."
    EDIT: maybe i didn't read your post well enough.. im just guessing here but maybe you can replace card U0x46d0x81d with
    device name_of_device..
    maybe..
    Last edited by test1000 (2010-10-24 17:06:36)

  • Hi!  Question about setting default size when opening existing PDF's.

    The pdf documents i download all seem to open up at 202% size. Is there a way to set my default size (for opening and reading documents) to something smaller, so I don't have to always use the magnifying tool to shrink them? Thanks!

    Under Preferences | Page Display, set Zoom to 100% or whatever you would like to open it with.

  • IPhoto by Default opens when card reader is attached?

    I would like to find out how to disable iPhoto from automatically opening when ever a memory card is inserted into the reader.

    Lillanne,
    You can stop this by opening Image Capture in your Applications folder. Go into its Preferences under the General tab and change the: "When a camera is connected, open:" to No Application.
    Hope this helped!
    Sam

  • Setting Default Directory When Scanning

    I have Acrobat 8 Professional. Most of what I do is scanning
    documents and I would like the documents to go into one particular
    directory or a parent directory and then allow me to choose a child
    directory.
    I have not been able to find a place to set a default
    directory.

    Thank you for your response. These forums are specific to the
    Acrobat.com website and its set of hosted services, and do not
    cover the Acrobat family of desktop products. Please visit the
    following forums for any questions related to the Acrobat family of
    desktop products:
    http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/

  • When sending an email how do I set the address when sending to multiple recipients so that each recipient only sees his or hers address and not everyone else

    I would like so send emails to multiple addresses yet I want each recipient to only see his or her address

    This question isn't related to Mozilla Firefox. However, I can still answer your question. In the 'to' field, put your own e-mail address and put each recipient's address in the BCC field. This way the only address seen is your own.
    Please try to post in the appropriate forum next time. (Thunderbird, Gmail, etc.)

  • How to set Default database when multiple databases are residing in same server.

    I am using solaris and 9i version.
    Can you please provide me the steps.
    i have selected the O/S category, you did not see that?
    Rgds,
    G. Rajakumar.

    In the home directory of the user you log in as, there should be a file called .profile or .cshrc or possibly .login depending on your O/S. I believe that Solaris has .cshrc, but I don't use Solaris. You should be able to see it using
    ls -lat
    You need to add a line to this something like
    export ORACLE_SID=<<yoursid>> or
    ORACLE_SID=<<yoursid>> ; export ORACLE_SID or
    setenv ORACLE_SID=<<yoursid>>
    There is probably a similar line there already which you can just modify. The change will take effect the next time you log in.
    HTH
    John

  • Default Address format

    How can i set default address format & show complete name of country & state in pld.

    Hi,
    Check the following thread
    Country Field problem
    Re: Address Formats - Country
    Invoice ship to State and Country
    *Close the thread if issue solved.
    Regards
    Jambulingam.P

  • Can You set a Default Email Address when sending Emails

    I have multiple email accounts set up. When I compose a new message, it always uses the send address of the message that is selected in the open window. Is there anyway to set a particular address as default or better yet don't pick an address and force me to select one from the pull down list?
    Doug Eaton

    Hello Doug.
    Copied from Setting the account your email is sent from.
    If you have set up multiple accounts in Mail, when you create a new message, the account the message is sent from is the one associated with the currently selected mailbox. If the current mailbox is listed in the On My Mac section of the mailbox list and is not associated with any particular account, then your message is sent from the first account listed in the Accounts pane of Mail Preferences.
    You can select a different account to use to send the mail.
    To send a message from a different account, choose the account from the Account pop-up menu when you're composing the message.
    To change the order in which accounts are listed in the mailbox list, drag the account names into the order you want. You can also rearrange the account order in the Accounts pane of Mail Preferences.
    Tiger Mail includes a default email account selection when selecting New to compose a new message regardless which mailbox is currently selected.

  • Entered incorrect email address when setting up Apple ID, therefore cannot get verification email. Also 'redeemed' $50 iTunes card before mistake was realised.

    Entered incorrect email address when setting up Apple ID, also 'redeemed' $50 iTunes card before mistake was realised. Naturally, the email address cannot be validated, so cannot proceed further. Please help.

    You can't merge IDs, but if you want to change the ID:
    For iMessage, go to Settings>Messages>Send & Receive, tap the ID sign out, sign back in using the new ID.
    For FaceTime, do the same thing in Settings>FaceTime.
    For Purchasing, do this in Settings>iTunes & App Store.
    For iCloud, start by saving your photo stream photos to your camera roll by opening your My Photo Stream album, tap Select, tap all the photos you want to save, tap the share icon (box with upward pointing arrow), then tap Save to Camera Roll. Then go to Settings>iCloud, tap Delete Account and provide the password and choose Keep on My iPhone when prompted, then sign back in with your new ID and choose Merge to upload your data.

  • How can I set my default email address when sending new messages

      I have 2 accounts in my Mail Preferences, hotmail and gmail.  I have tried to set it so when I send a message to a new recipient  it is my gmail one that is used as default.  However,  it is thehotmail account that is always ticked first.
    I would like to set my mail preferences so the gmail is my default first choice in sending new messages and is ticked as my default email address.
    thanks for reading
    gus

    gus,
    Have you gone to Mail>Preferences...>Composing>Addressing:> and selected "Send new messages from:" your preferred account?

Maybe you are looking for